mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-24 08:16:45 +07:00
19ec6bb802
The Raspberry Pi 4 SDHCI hardware seems to automatically issue CMD12
after multiblock reads even when ACMD12 is disabled. This triggers
spurious interrupts after the data transfer is done with the following
message:
mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.
mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00001002
mmc1: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000000
mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x00000033
mmc1: sdhci: Present: 0x1fff0000 | Host ctl: 0x00000017
mmc1: sdhci: Power: 0x0000000f | Blk gap: 0x00000080
mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x00000107
mmc1: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
mmc1: sdhci: Int enab: 0x03ff100b | Sig enab: 0x03ff100b
mmc1: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
mmc1: sdhci: Caps: 0x45ee6432 | Caps_1: 0x0000a525
mmc1: sdhci: Cmd: 0x00000c1a | Max curr: 0x00080008
mmc1: sdhci: Resp[0]: 0x00000b00 | Resp[1]: 0x00edc87f
mmc1: sdhci: Resp[2]: 0x325b5900 | Resp[3]: 0x00400e00
mmc1: sdhci: Host ctl2: 0x00000001
mmc1: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0xf3025208
mmc1: sdhci: ============================================
Enable SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 to enable ACMD12 on multiblock
reads and suppress the spurious interrupts.
Fixes: f84e411c85
("mmc: sdhci-iproc: Add support for emmc2 of the BCM2711")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
366 lines
10 KiB
C
366 lines
10 KiB
C
/*
|
|
* Copyright (C) 2014 Broadcom Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation version 2.
|
|
*
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
|
* kind, whether express or implied; without even the implied warranty
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
/*
|
|
* iProc SDHCI platform driver
|
|
*/
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include "sdhci-pltfm.h"
|
|
|
|
struct sdhci_iproc_data {
|
|
const struct sdhci_pltfm_data *pdata;
|
|
u32 caps;
|
|
u32 caps1;
|
|
u32 mmc_caps;
|
|
};
|
|
|
|
struct sdhci_iproc_host {
|
|
const struct sdhci_iproc_data *data;
|
|
u32 shadow_cmd;
|
|
u32 shadow_blk;
|
|
bool is_cmd_shadowed;
|
|
bool is_blk_shadowed;
|
|
};
|
|
|
|
#define REG_OFFSET_IN_BITS(reg) ((reg) << 3 & 0x18)
|
|
|
|
static inline u32 sdhci_iproc_readl(struct sdhci_host *host, int reg)
|
|
{
|
|
u32 val = readl(host->ioaddr + reg);
|
|
|
|
pr_debug("%s: readl [0x%02x] 0x%08x\n",
|
|
mmc_hostname(host->mmc), reg, val);
|
|
return val;
|
|
}
|
|
|
|
static u16 sdhci_iproc_readw(struct sdhci_host *host, int reg)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_iproc_host *iproc_host = sdhci_pltfm_priv(pltfm_host);
|
|
u32 val;
|
|
u16 word;
|
|
|
|
if ((reg == SDHCI_TRANSFER_MODE) && iproc_host->is_cmd_shadowed) {
|
|
/* Get the saved transfer mode */
|
|
val = iproc_host->shadow_cmd;
|
|
} else if ((reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) &&
|
|
iproc_host->is_blk_shadowed) {
|
|
/* Get the saved block info */
|
|
val = iproc_host->shadow_blk;
|
|
} else {
|
|
val = sdhci_iproc_readl(host, (reg & ~3));
|
|
}
|
|
word = val >> REG_OFFSET_IN_BITS(reg) & 0xffff;
|
|
return word;
|
|
}
|
|
|
|
static u8 sdhci_iproc_readb(struct sdhci_host *host, int reg)
|
|
{
|
|
u32 val = sdhci_iproc_readl(host, (reg & ~3));
|
|
u8 byte = val >> REG_OFFSET_IN_BITS(reg) & 0xff;
|
|
return byte;
|
|
}
|
|
|
|
static inline void sdhci_iproc_writel(struct sdhci_host *host, u32 val, int reg)
|
|
{
|
|
pr_debug("%s: writel [0x%02x] 0x%08x\n",
|
|
mmc_hostname(host->mmc), reg, val);
|
|
|
|
writel(val, host->ioaddr + reg);
|
|
|
|
if (host->clock <= 400000) {
|
|
/* Round up to micro-second four SD clock delay */
|
|
if (host->clock)
|
|
udelay((4 * 1000000 + host->clock - 1) / host->clock);
|
|
else
|
|
udelay(10);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* The Arasan has a bugette whereby it may lose the content of successive
|
|
* writes to the same register that are within two SD-card clock cycles of
|
|
* each other (a clock domain crossing problem). The data
|
|
* register does not have this problem, which is just as well - otherwise we'd
|
|
* have to nobble the DMA engine too.
|
|
*
|
|
* This wouldn't be a problem with the code except that we can only write the
|
|
* controller with 32-bit writes. So two different 16-bit registers are
|
|
* written back to back creates the problem.
|
|
*
|
|
* In reality, this only happens when SDHCI_BLOCK_SIZE and SDHCI_BLOCK_COUNT
|
|
* are written followed by SDHCI_TRANSFER_MODE and SDHCI_COMMAND.
|
|
* The BLOCK_SIZE and BLOCK_COUNT are meaningless until a command issued so
|
|
* the work around can be further optimized. We can keep shadow values of
|
|
* BLOCK_SIZE, BLOCK_COUNT, and TRANSFER_MODE until a COMMAND is issued.
|
|
* Then, write the BLOCK_SIZE+BLOCK_COUNT in a single 32-bit write followed
|
|
* by the TRANSFER+COMMAND in another 32-bit write.
|
|
*/
|
|
static void sdhci_iproc_writew(struct sdhci_host *host, u16 val, int reg)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_iproc_host *iproc_host = sdhci_pltfm_priv(pltfm_host);
|
|
u32 word_shift = REG_OFFSET_IN_BITS(reg);
|
|
u32 mask = 0xffff << word_shift;
|
|
u32 oldval, newval;
|
|
|
|
if (reg == SDHCI_COMMAND) {
|
|
/* Write the block now as we are issuing a command */
|
|
if (iproc_host->is_blk_shadowed) {
|
|
sdhci_iproc_writel(host, iproc_host->shadow_blk,
|
|
SDHCI_BLOCK_SIZE);
|
|
iproc_host->is_blk_shadowed = false;
|
|
}
|
|
oldval = iproc_host->shadow_cmd;
|
|
iproc_host->is_cmd_shadowed = false;
|
|
} else if ((reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) &&
|
|
iproc_host->is_blk_shadowed) {
|
|
/* Block size and count are stored in shadow reg */
|
|
oldval = iproc_host->shadow_blk;
|
|
} else {
|
|
/* Read reg, all other registers are not shadowed */
|
|
oldval = sdhci_iproc_readl(host, (reg & ~3));
|
|
}
|
|
newval = (oldval & ~mask) | (val << word_shift);
|
|
|
|
if (reg == SDHCI_TRANSFER_MODE) {
|
|
/* Save the transfer mode until the command is issued */
|
|
iproc_host->shadow_cmd = newval;
|
|
iproc_host->is_cmd_shadowed = true;
|
|
} else if (reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) {
|
|
/* Save the block info until the command is issued */
|
|
iproc_host->shadow_blk = newval;
|
|
iproc_host->is_blk_shadowed = true;
|
|
} else {
|
|
/* Command or other regular 32-bit write */
|
|
sdhci_iproc_writel(host, newval, reg & ~3);
|
|
}
|
|
}
|
|
|
|
static void sdhci_iproc_writeb(struct sdhci_host *host, u8 val, int reg)
|
|
{
|
|
u32 oldval = sdhci_iproc_readl(host, (reg & ~3));
|
|
u32 byte_shift = REG_OFFSET_IN_BITS(reg);
|
|
u32 mask = 0xff << byte_shift;
|
|
u32 newval = (oldval & ~mask) | (val << byte_shift);
|
|
|
|
sdhci_iproc_writel(host, newval, reg & ~3);
|
|
}
|
|
|
|
static unsigned int sdhci_iproc_get_max_clock(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
|
|
if (pltfm_host->clk)
|
|
return sdhci_pltfm_clk_get_max_clock(host);
|
|
else
|
|
return pltfm_host->clock;
|
|
}
|
|
|
|
static const struct sdhci_ops sdhci_iproc_ops = {
|
|
.set_clock = sdhci_set_clock,
|
|
.get_max_clock = sdhci_iproc_get_max_clock,
|
|
.set_bus_width = sdhci_set_bus_width,
|
|
.reset = sdhci_reset,
|
|
.set_uhs_signaling = sdhci_set_uhs_signaling,
|
|
};
|
|
|
|
static const struct sdhci_ops sdhci_iproc_32only_ops = {
|
|
.read_l = sdhci_iproc_readl,
|
|
.read_w = sdhci_iproc_readw,
|
|
.read_b = sdhci_iproc_readb,
|
|
.write_l = sdhci_iproc_writel,
|
|
.write_w = sdhci_iproc_writew,
|
|
.write_b = sdhci_iproc_writeb,
|
|
.set_clock = sdhci_set_clock,
|
|
.get_max_clock = sdhci_iproc_get_max_clock,
|
|
.set_bus_width = sdhci_set_bus_width,
|
|
.reset = sdhci_reset,
|
|
.set_uhs_signaling = sdhci_set_uhs_signaling,
|
|
};
|
|
|
|
static const struct sdhci_pltfm_data sdhci_iproc_cygnus_pltfm_data = {
|
|
.quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
|
|
SDHCI_QUIRK_NO_HISPD_BIT,
|
|
.quirks2 = SDHCI_QUIRK2_ACMD23_BROKEN | SDHCI_QUIRK2_HOST_OFF_CARD_ON,
|
|
.ops = &sdhci_iproc_32only_ops,
|
|
};
|
|
|
|
static const struct sdhci_iproc_data iproc_cygnus_data = {
|
|
.pdata = &sdhci_iproc_cygnus_pltfm_data,
|
|
.caps = ((0x1 << SDHCI_MAX_BLOCK_SHIFT)
|
|
& SDHCI_MAX_BLOCK_MASK) |
|
|
SDHCI_CAN_VDD_330 |
|
|
SDHCI_CAN_VDD_180 |
|
|
SDHCI_CAN_DO_SUSPEND |
|
|
SDHCI_CAN_DO_HISPD |
|
|
SDHCI_CAN_DO_ADMA2 |
|
|
SDHCI_CAN_DO_SDMA,
|
|
.caps1 = SDHCI_DRIVER_TYPE_C |
|
|
SDHCI_DRIVER_TYPE_D |
|
|
SDHCI_SUPPORT_DDR50,
|
|
.mmc_caps = MMC_CAP_1_8V_DDR,
|
|
};
|
|
|
|
static const struct sdhci_pltfm_data sdhci_iproc_pltfm_data = {
|
|
.quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
|
|
SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 |
|
|
SDHCI_QUIRK_NO_HISPD_BIT,
|
|
.quirks2 = SDHCI_QUIRK2_ACMD23_BROKEN,
|
|
.ops = &sdhci_iproc_ops,
|
|
};
|
|
|
|
static const struct sdhci_iproc_data iproc_data = {
|
|
.pdata = &sdhci_iproc_pltfm_data,
|
|
.caps = ((0x1 << SDHCI_MAX_BLOCK_SHIFT)
|
|
& SDHCI_MAX_BLOCK_MASK) |
|
|
SDHCI_CAN_VDD_330 |
|
|
SDHCI_CAN_VDD_180 |
|
|
SDHCI_CAN_DO_SUSPEND |
|
|
SDHCI_CAN_DO_HISPD |
|
|
SDHCI_CAN_DO_ADMA2 |
|
|
SDHCI_CAN_DO_SDMA,
|
|
.caps1 = SDHCI_DRIVER_TYPE_C |
|
|
SDHCI_DRIVER_TYPE_D |
|
|
SDHCI_SUPPORT_DDR50,
|
|
};
|
|
|
|
static const struct sdhci_pltfm_data sdhci_bcm2835_pltfm_data = {
|
|
.quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
|
|
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
|
|
SDHCI_QUIRK_MISSING_CAPS |
|
|
SDHCI_QUIRK_NO_HISPD_BIT,
|
|
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
|
|
.ops = &sdhci_iproc_32only_ops,
|
|
};
|
|
|
|
static const struct sdhci_iproc_data bcm2835_data = {
|
|
.pdata = &sdhci_bcm2835_pltfm_data,
|
|
.caps = ((0x1 << SDHCI_MAX_BLOCK_SHIFT)
|
|
& SDHCI_MAX_BLOCK_MASK) |
|
|
SDHCI_CAN_VDD_330 |
|
|
SDHCI_CAN_DO_HISPD,
|
|
.caps1 = SDHCI_DRIVER_TYPE_A |
|
|
SDHCI_DRIVER_TYPE_C,
|
|
.mmc_caps = 0x00000000,
|
|
};
|
|
|
|
static const struct sdhci_pltfm_data sdhci_bcm2711_pltfm_data = {
|
|
.quirks = SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12,
|
|
.ops = &sdhci_iproc_32only_ops,
|
|
};
|
|
|
|
static const struct sdhci_iproc_data bcm2711_data = {
|
|
.pdata = &sdhci_bcm2711_pltfm_data,
|
|
};
|
|
|
|
static const struct of_device_id sdhci_iproc_of_match[] = {
|
|
{ .compatible = "brcm,bcm2835-sdhci", .data = &bcm2835_data },
|
|
{ .compatible = "brcm,bcm2711-emmc2", .data = &bcm2711_data },
|
|
{ .compatible = "brcm,sdhci-iproc-cygnus", .data = &iproc_cygnus_data},
|
|
{ .compatible = "brcm,sdhci-iproc", .data = &iproc_data },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sdhci_iproc_of_match);
|
|
|
|
static const struct acpi_device_id sdhci_iproc_acpi_ids[] = {
|
|
{ .id = "BRCM5871", .driver_data = (kernel_ulong_t)&iproc_cygnus_data },
|
|
{ .id = "BRCM5872", .driver_data = (kernel_ulong_t)&iproc_data },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, sdhci_iproc_acpi_ids);
|
|
|
|
static int sdhci_iproc_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
const struct sdhci_iproc_data *iproc_data = NULL;
|
|
struct sdhci_host *host;
|
|
struct sdhci_iproc_host *iproc_host;
|
|
struct sdhci_pltfm_host *pltfm_host;
|
|
int ret;
|
|
|
|
iproc_data = device_get_match_data(dev);
|
|
if (!iproc_data)
|
|
return -ENODEV;
|
|
|
|
host = sdhci_pltfm_init(pdev, iproc_data->pdata, sizeof(*iproc_host));
|
|
if (IS_ERR(host))
|
|
return PTR_ERR(host);
|
|
|
|
pltfm_host = sdhci_priv(host);
|
|
iproc_host = sdhci_pltfm_priv(pltfm_host);
|
|
|
|
iproc_host->data = iproc_data;
|
|
|
|
ret = mmc_of_parse(host->mmc);
|
|
if (ret)
|
|
goto err;
|
|
|
|
sdhci_get_property(pdev);
|
|
|
|
host->mmc->caps |= iproc_host->data->mmc_caps;
|
|
|
|
if (dev->of_node) {
|
|
pltfm_host->clk = devm_clk_get(dev, NULL);
|
|
if (IS_ERR(pltfm_host->clk)) {
|
|
ret = PTR_ERR(pltfm_host->clk);
|
|
goto err;
|
|
}
|
|
ret = clk_prepare_enable(pltfm_host->clk);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable host clk\n");
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
if (iproc_host->data->pdata->quirks & SDHCI_QUIRK_MISSING_CAPS) {
|
|
host->caps = iproc_host->data->caps;
|
|
host->caps1 = iproc_host->data->caps1;
|
|
}
|
|
|
|
ret = sdhci_add_host(host);
|
|
if (ret)
|
|
goto err_clk;
|
|
|
|
return 0;
|
|
|
|
err_clk:
|
|
if (dev->of_node)
|
|
clk_disable_unprepare(pltfm_host->clk);
|
|
err:
|
|
sdhci_pltfm_free(pdev);
|
|
return ret;
|
|
}
|
|
|
|
static struct platform_driver sdhci_iproc_driver = {
|
|
.driver = {
|
|
.name = "sdhci-iproc",
|
|
.of_match_table = sdhci_iproc_of_match,
|
|
.acpi_match_table = ACPI_PTR(sdhci_iproc_acpi_ids),
|
|
.pm = &sdhci_pltfm_pmops,
|
|
},
|
|
.probe = sdhci_iproc_probe,
|
|
.remove = sdhci_pltfm_unregister,
|
|
};
|
|
module_platform_driver(sdhci_iproc_driver);
|
|
|
|
MODULE_AUTHOR("Broadcom");
|
|
MODULE_DESCRIPTION("IPROC SDHCI driver");
|
|
MODULE_LICENSE("GPL v2");
|