linux_dsm_epyc7002/net/mac80211/ht.c
Sujith 81cb7623ad mac80211: Extend the rate control API with an update callback
The AP can switch dynamically between 20/40 Mhz channel width,
in which case we switch the local operating channel, but the
rate control algorithm is not notified. This patch adds a new callback
to indicate such changes to the RC algorithm.

Currently, HT channel width change is notified, but this callback
can be used to indicate any new requirements that might come up later on.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27 14:51:45 -05:00

255 lines
7.5 KiB
C

/*
* HT handling
*
* Copyright 2003, Jouni Malinen <jkmaline@cc.hut.fi>
* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005-2006, Devicescape Software, Inc.
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
* Copyright 2007, Michael Wu <flamingice@sourmilk.net>
* Copyright 2007-2008, Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/ieee80211.h>
#include <net/wireless.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
#include "rate.h"
void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_supported_band *sband,
struct ieee80211_ht_cap *ht_cap_ie,
struct ieee80211_sta_ht_cap *ht_cap)
{
u8 ampdu_info, tx_mcs_set_cap;
int i, max_tx_streams;
BUG_ON(!ht_cap);
memset(ht_cap, 0, sizeof(*ht_cap));
if (!ht_cap_ie)
return;
ht_cap->ht_supported = true;
ht_cap->cap = le16_to_cpu(ht_cap_ie->cap_info) & sband->ht_cap.cap;
ht_cap->cap &= ~IEEE80211_HT_CAP_SM_PS;
ht_cap->cap |= sband->ht_cap.cap & IEEE80211_HT_CAP_SM_PS;
ampdu_info = ht_cap_ie->ampdu_params_info;
ht_cap->ampdu_factor =
ampdu_info & IEEE80211_HT_AMPDU_PARM_FACTOR;
ht_cap->ampdu_density =
(ampdu_info & IEEE80211_HT_AMPDU_PARM_DENSITY) >> 2;
/* own MCS TX capabilities */
tx_mcs_set_cap = sband->ht_cap.mcs.tx_params;
/* can we TX with MCS rates? */
if (!(tx_mcs_set_cap & IEEE80211_HT_MCS_TX_DEFINED))
return;
/* Counting from 0, therefore +1 */
if (tx_mcs_set_cap & IEEE80211_HT_MCS_TX_RX_DIFF)
max_tx_streams =
((tx_mcs_set_cap & IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK)
>> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT) + 1;
else
max_tx_streams = IEEE80211_HT_MCS_TX_MAX_STREAMS;
/*
* 802.11n D5.0 20.3.5 / 20.6 says:
* - indices 0 to 7 and 32 are single spatial stream
* - 8 to 31 are multiple spatial streams using equal modulation
* [8..15 for two streams, 16..23 for three and 24..31 for four]
* - remainder are multiple spatial streams using unequal modulation
*/
for (i = 0; i < max_tx_streams; i++)
ht_cap->mcs.rx_mask[i] =
sband->ht_cap.mcs.rx_mask[i] & ht_cap_ie->mcs.rx_mask[i];
if (tx_mcs_set_cap & IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION)
for (i = IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE;
i < IEEE80211_HT_MCS_MASK_LEN; i++)
ht_cap->mcs.rx_mask[i] =
sband->ht_cap.mcs.rx_mask[i] &
ht_cap_ie->mcs.rx_mask[i];
/* handle MCS rate 32 too */
if (sband->ht_cap.mcs.rx_mask[32/8] & ht_cap_ie->mcs.rx_mask[32/8] & 1)
ht_cap->mcs.rx_mask[32/8] |= 1;
}
/*
* ieee80211_enable_ht should be called only after the operating band
* has been determined as ht configuration depends on the hw's
* HT abilities for a specific band.
*/
u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
struct ieee80211_ht_info *hti,
u16 ap_ht_cap_flags)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_supported_band *sband;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_bss_ht_conf ht;
struct sta_info *sta;
u32 changed = 0;
bool enable_ht = true, ht_changed;
enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
memset(&ht, 0, sizeof(ht));
/* HT is not supported */
if (!sband->ht_cap.ht_supported)
enable_ht = false;
/* check that channel matches the right operating channel */
if (local->hw.conf.channel->center_freq !=
ieee80211_channel_to_frequency(hti->control_chan))
enable_ht = false;
if (enable_ht) {
channel_type = NL80211_CHAN_HT20;
if (!(ap_ht_cap_flags & IEEE80211_HT_CAP_40MHZ_INTOLERANT) &&
(sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) &&
(hti->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) {
switch(hti->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
channel_type = NL80211_CHAN_HT40PLUS;
break;
case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
channel_type = NL80211_CHAN_HT40MINUS;
break;
}
}
}
ht_changed = conf_is_ht(&local->hw.conf) != enable_ht ||
channel_type != local->hw.conf.channel_type;
local->oper_channel_type = channel_type;
if (ht_changed) {
/* channel_type change automatically detected */
ieee80211_hw_config(local, 0);
rcu_read_lock();
sta = sta_info_get(local, ifmgd->bssid);
if (sta)
rate_control_rate_update(local, sband, sta,
IEEE80211_RC_HT_CHANGED);
rcu_read_unlock();
}
/* disable HT */
if (!enable_ht)
return 0;
ht.operation_mode = le16_to_cpu(hti->operation_mode);
/* if bss configuration changed store the new one */
if (memcmp(&sdata->vif.bss_conf.ht, &ht, sizeof(ht))) {
changed |= BSS_CHANGED_HT;
sdata->vif.bss_conf.ht = ht;
}
return changed;
}
void ieee80211_sta_tear_down_BA_sessions(struct sta_info *sta)
{
int i;
for (i = 0; i < STA_TID_NUM; i++) {
__ieee80211_stop_tx_ba_session(sta, i, WLAN_BACK_INITIATOR);
__ieee80211_stop_rx_ba_session(sta, i, WLAN_BACK_RECIPIENT,
WLAN_REASON_QSTA_LEAVE_QBSS);
}
}
void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata,
const u8 *da, u16 tid,
u16 initiator, u16 reason_code)
{
struct ieee80211_local *local = sdata->local;
struct sk_buff *skb;
struct ieee80211_mgmt *mgmt;
u16 params;
skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom);
if (!skb) {
printk(KERN_ERR "%s: failed to allocate buffer "
"for delba frame\n", sdata->dev->name);
return;
}
skb_reserve(skb, local->hw.extra_tx_headroom);
mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
memset(mgmt, 0, 24);
memcpy(mgmt->da, da, ETH_ALEN);
memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
if (sdata->vif.type == NL80211_IFTYPE_AP ||
sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
memcpy(mgmt->bssid, sdata->dev->dev_addr, ETH_ALEN);
else if (sdata->vif.type == NL80211_IFTYPE_STATION)
memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN);
mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
IEEE80211_STYPE_ACTION);
skb_put(skb, 1 + sizeof(mgmt->u.action.u.delba));
mgmt->u.action.category = WLAN_CATEGORY_BACK;
mgmt->u.action.u.delba.action_code = WLAN_ACTION_DELBA;
params = (u16)(initiator << 11); /* bit 11 initiator */
params |= (u16)(tid << 12); /* bit 15:12 TID number */
mgmt->u.action.u.delba.params = cpu_to_le16(params);
mgmt->u.action.u.delba.reason_code = cpu_to_le16(reason_code);
ieee80211_tx_skb(sdata, skb, 1);
}
void ieee80211_process_delba(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta,
struct ieee80211_mgmt *mgmt, size_t len)
{
struct ieee80211_local *local = sdata->local;
u16 tid, params;
u16 initiator;
params = le16_to_cpu(mgmt->u.action.u.delba.params);
tid = (params & IEEE80211_DELBA_PARAM_TID_MASK) >> 12;
initiator = (params & IEEE80211_DELBA_PARAM_INITIATOR_MASK) >> 11;
#ifdef CONFIG_MAC80211_HT_DEBUG
if (net_ratelimit())
printk(KERN_DEBUG "delba from %pM (%s) tid %d reason code %d\n",
mgmt->sa, initiator ? "initiator" : "recipient", tid,
mgmt->u.action.u.delba.reason_code);
#endif /* CONFIG_MAC80211_HT_DEBUG */
if (initiator == WLAN_BACK_INITIATOR)
ieee80211_sta_stop_rx_ba_session(sdata, sta->sta.addr, tid,
WLAN_BACK_INITIATOR, 0);
else { /* WLAN_BACK_RECIPIENT */
spin_lock_bh(&sta->lock);
sta->ampdu_mlme.tid_state_tx[tid] =
HT_AGG_STATE_OPERATIONAL;
spin_unlock_bh(&sta->lock);
ieee80211_stop_tx_ba_session(&local->hw, sta->sta.addr, tid,
WLAN_BACK_RECIPIENT);
}
}