Abhishek Sahu 2b84a4dd4b i2c: qup: Cleared the error bits in ISR ... 1. Current QCOM I2C driver hangs when sending data to address 0x03-0x07 in some scenarios. The QUP controller generates invalid write in this case, since these addresses are reserved for different bus formats. 2. Also, the error handling is done by I2C QUP ISR in the case of DMA mode. The state need to be RESET in case of any error for clearing the available data in FIFO, which otherwise leaves the BAM DMA controller in hang state. This patch fixes the above two issues by clearing the error bits from I2C and QUP status in ISR in case of I2C error, QUP error and resets the QUP state to clear the FIFO data. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>		2016-07-15 15:26:56 +09:00
..
algos	i2c: algo-bit: declare i2c_bit_quirk_no_clk_stretch as static	2016-05-11 17:16:30 +02:00
busses	i2c: qup: Cleared the error bits in ISR	2016-07-15 15:26:56 +09:00
muxes	i2c: mux: reg: Provide of_match_table	2016-06-09 22:38:16 +02:00
i2c-boardinfo.c	i2c: i2c-boardinfo: sort includes	2016-02-20 23:33:38 +01:00
i2c-core.c	i2c: core: Add function for finding the bus speed from ACPI	2016-07-14 22:25:10 +09:00
i2c-core.h	i2c: remove FSF address	2014-11-07 18:35:33 +01:00
i2c-dev.c	i2c-dev: don't get i2c adapter via i2c_dev	2016-07-08 10:29:31 +09:00
i2c-mux.c	i2c: mux: relax locking of the top i2c adapter during mux-locked muxing	2016-05-04 22:39:17 +02:00
i2c-slave-eeprom.c	i2c: Drop owner assignment from i2c_driver	2015-08-10 08:37:35 +02:00
i2c-smbus.c	i2c: smbus: add SMBus Host Notify support	2016-06-17 13:24:05 +02:00
i2c-stub.c	i2c: i2c-stub: sort includes	2016-02-20 23:33:39 +01:00
Kconfig	kconfig: use bool instead of boolean for type definition attributes	2015-01-07 13:08:04 +01:00
Makefile	i2c: slave-eeprom: add eeprom simulator driver	2014-12-11 22:25:54 +01:00