mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-12 04:46:58 +07:00
97e4ba6a5e
Eanble the ADMA2 mode for freescale esdhc imx driver, tested on MX25 3DS board, MX51 BBG board and MX53 LOCO board. This patch is only used to enable the ADMA2 for MX51/53 platforms. MX25/35 can't support the ADMA2 mode, set BROKEN_ADMA quirk on MX25/35 platforms. The ADMA mode supported or not can be distinguished by bit 20 of the Capability Register (offset 0x40) in the FSL eSDHC module. Signed-off-by: Richard Zhu <richard.zhu@linaro.org> Tested-and-acked-by: Eric Miao <eric.miao@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
591 lines
16 KiB
C
591 lines
16 KiB
C
/*
|
|
* Freescale eSDHC i.MX controller driver for the platform bus.
|
|
*
|
|
* derived from the OF-version.
|
|
*
|
|
* Copyright (c) 2010 Pengutronix e.K.
|
|
* Author: Wolfram Sang <w.sang@pengutronix.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License.
|
|
*/
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/mmc.h>
|
|
#include <linux/mmc/sdio.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <mach/esdhc.h>
|
|
#include "sdhci-pltfm.h"
|
|
#include "sdhci-esdhc.h"
|
|
|
|
#define SDHCI_CTRL_D3CD 0x08
|
|
/* VENDOR SPEC register */
|
|
#define SDHCI_VENDOR_SPEC 0xC0
|
|
#define SDHCI_VENDOR_SPEC_SDIO_QUIRK 0x00000002
|
|
|
|
/*
|
|
* There is an INT DMA ERR mis-match between eSDHC and STD SDHC SPEC:
|
|
* Bit25 is used in STD SPEC, and is reserved in fsl eSDHC design,
|
|
* but bit28 is used as the INT DMA ERR in fsl eSDHC design.
|
|
* Define this macro DMA error INT for fsl eSDHC
|
|
*/
|
|
#define SDHCI_INT_VENDOR_SPEC_DMA_ERR 0x10000000
|
|
|
|
/*
|
|
* The CMDTYPE of the CMD register (offset 0xE) should be set to
|
|
* "11" when the STOP CMD12 is issued on imx53 to abort one
|
|
* open ended multi-blk IO. Otherwise the TC INT wouldn't
|
|
* be generated.
|
|
* In exact block transfer, the controller doesn't complete the
|
|
* operations automatically as required at the end of the
|
|
* transfer and remains on hold if the abort command is not sent.
|
|
* As a result, the TC flag is not asserted and SW received timeout
|
|
* exeception. Bit1 of Vendor Spec registor is used to fix it.
|
|
*/
|
|
#define ESDHC_FLAG_MULTIBLK_NO_INT (1 << 1)
|
|
|
|
enum imx_esdhc_type {
|
|
IMX25_ESDHC,
|
|
IMX35_ESDHC,
|
|
IMX51_ESDHC,
|
|
IMX53_ESDHC,
|
|
};
|
|
|
|
struct pltfm_imx_data {
|
|
int flags;
|
|
u32 scratchpad;
|
|
enum imx_esdhc_type devtype;
|
|
struct esdhc_platform_data boarddata;
|
|
};
|
|
|
|
static struct platform_device_id imx_esdhc_devtype[] = {
|
|
{
|
|
.name = "sdhci-esdhc-imx25",
|
|
.driver_data = IMX25_ESDHC,
|
|
}, {
|
|
.name = "sdhci-esdhc-imx35",
|
|
.driver_data = IMX35_ESDHC,
|
|
}, {
|
|
.name = "sdhci-esdhc-imx51",
|
|
.driver_data = IMX51_ESDHC,
|
|
}, {
|
|
.name = "sdhci-esdhc-imx53",
|
|
.driver_data = IMX53_ESDHC,
|
|
}, {
|
|
/* sentinel */
|
|
}
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, imx_esdhc_devtype);
|
|
|
|
static const struct of_device_id imx_esdhc_dt_ids[] = {
|
|
{ .compatible = "fsl,imx25-esdhc", .data = &imx_esdhc_devtype[IMX25_ESDHC], },
|
|
{ .compatible = "fsl,imx35-esdhc", .data = &imx_esdhc_devtype[IMX35_ESDHC], },
|
|
{ .compatible = "fsl,imx51-esdhc", .data = &imx_esdhc_devtype[IMX51_ESDHC], },
|
|
{ .compatible = "fsl,imx53-esdhc", .data = &imx_esdhc_devtype[IMX53_ESDHC], },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, imx_esdhc_dt_ids);
|
|
|
|
static inline int is_imx25_esdhc(struct pltfm_imx_data *data)
|
|
{
|
|
return data->devtype == IMX25_ESDHC;
|
|
}
|
|
|
|
static inline int is_imx35_esdhc(struct pltfm_imx_data *data)
|
|
{
|
|
return data->devtype == IMX35_ESDHC;
|
|
}
|
|
|
|
static inline int is_imx51_esdhc(struct pltfm_imx_data *data)
|
|
{
|
|
return data->devtype == IMX51_ESDHC;
|
|
}
|
|
|
|
static inline int is_imx53_esdhc(struct pltfm_imx_data *data)
|
|
{
|
|
return data->devtype == IMX53_ESDHC;
|
|
}
|
|
|
|
static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, int reg)
|
|
{
|
|
void __iomem *base = host->ioaddr + (reg & ~0x3);
|
|
u32 shift = (reg & 0x3) * 8;
|
|
|
|
writel(((readl(base) & ~(mask << shift)) | (val << shift)), base);
|
|
}
|
|
|
|
static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct pltfm_imx_data *imx_data = pltfm_host->priv;
|
|
struct esdhc_platform_data *boarddata = &imx_data->boarddata;
|
|
|
|
/* fake CARD_PRESENT flag */
|
|
u32 val = readl(host->ioaddr + reg);
|
|
|
|
if (unlikely((reg == SDHCI_PRESENT_STATE)
|
|
&& gpio_is_valid(boarddata->cd_gpio))) {
|
|
if (gpio_get_value(boarddata->cd_gpio))
|
|
/* no card, if a valid gpio says so... */
|
|
val &= ~SDHCI_CARD_PRESENT;
|
|
else
|
|
/* ... in all other cases assume card is present */
|
|
val |= SDHCI_CARD_PRESENT;
|
|
}
|
|
|
|
if (unlikely(reg == SDHCI_CAPABILITIES)) {
|
|
/* In FSL esdhc IC module, only bit20 is used to indicate the
|
|
* ADMA2 capability of esdhc, but this bit is messed up on
|
|
* some SOCs (e.g. on MX25, MX35 this bit is set, but they
|
|
* don't actually support ADMA2). So set the BROKEN_ADMA
|
|
* uirk on MX25/35 platforms.
|
|
*/
|
|
|
|
if (val & SDHCI_CAN_DO_ADMA1) {
|
|
val &= ~SDHCI_CAN_DO_ADMA1;
|
|
val |= SDHCI_CAN_DO_ADMA2;
|
|
}
|
|
}
|
|
|
|
if (unlikely(reg == SDHCI_INT_STATUS)) {
|
|
if (val & SDHCI_INT_VENDOR_SPEC_DMA_ERR) {
|
|
val &= ~SDHCI_INT_VENDOR_SPEC_DMA_ERR;
|
|
val |= SDHCI_INT_ADMA_ERROR;
|
|
}
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct pltfm_imx_data *imx_data = pltfm_host->priv;
|
|
struct esdhc_platform_data *boarddata = &imx_data->boarddata;
|
|
u32 data;
|
|
|
|
if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) {
|
|
if (boarddata->cd_type == ESDHC_CD_GPIO)
|
|
/*
|
|
* These interrupts won't work with a custom
|
|
* card_detect gpio (only applied to mx25/35)
|
|
*/
|
|
val &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT);
|
|
|
|
if (val & SDHCI_INT_CARD_INT) {
|
|
/*
|
|
* Clear and then set D3CD bit to avoid missing the
|
|
* card interrupt. This is a eSDHC controller problem
|
|
* so we need to apply the following workaround: clear
|
|
* and set D3CD bit will make eSDHC re-sample the card
|
|
* interrupt. In case a card interrupt was lost,
|
|
* re-sample it by the following steps.
|
|
*/
|
|
data = readl(host->ioaddr + SDHCI_HOST_CONTROL);
|
|
data &= ~SDHCI_CTRL_D3CD;
|
|
writel(data, host->ioaddr + SDHCI_HOST_CONTROL);
|
|
data |= SDHCI_CTRL_D3CD;
|
|
writel(data, host->ioaddr + SDHCI_HOST_CONTROL);
|
|
}
|
|
}
|
|
|
|
if (unlikely((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
|
|
&& (reg == SDHCI_INT_STATUS)
|
|
&& (val & SDHCI_INT_DATA_END))) {
|
|
u32 v;
|
|
v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
|
|
v &= ~SDHCI_VENDOR_SPEC_SDIO_QUIRK;
|
|
writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
|
|
}
|
|
|
|
if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) {
|
|
if (val & SDHCI_INT_ADMA_ERROR) {
|
|
val &= ~SDHCI_INT_ADMA_ERROR;
|
|
val |= SDHCI_INT_VENDOR_SPEC_DMA_ERR;
|
|
}
|
|
}
|
|
|
|
writel(val, host->ioaddr + reg);
|
|
}
|
|
|
|
static u16 esdhc_readw_le(struct sdhci_host *host, int reg)
|
|
{
|
|
if (unlikely(reg == SDHCI_HOST_VERSION))
|
|
reg ^= 2;
|
|
|
|
return readw(host->ioaddr + reg);
|
|
}
|
|
|
|
static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct pltfm_imx_data *imx_data = pltfm_host->priv;
|
|
|
|
switch (reg) {
|
|
case SDHCI_TRANSFER_MODE:
|
|
/*
|
|
* Postpone this write, we must do it together with a
|
|
* command write that is down below.
|
|
*/
|
|
if ((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
|
|
&& (host->cmd->opcode == SD_IO_RW_EXTENDED)
|
|
&& (host->cmd->data->blocks > 1)
|
|
&& (host->cmd->data->flags & MMC_DATA_READ)) {
|
|
u32 v;
|
|
v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
|
|
v |= SDHCI_VENDOR_SPEC_SDIO_QUIRK;
|
|
writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
|
|
}
|
|
imx_data->scratchpad = val;
|
|
return;
|
|
case SDHCI_COMMAND:
|
|
if ((host->cmd->opcode == MMC_STOP_TRANSMISSION)
|
|
&& (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
|
|
val |= SDHCI_CMD_ABORTCMD;
|
|
writel(val << 16 | imx_data->scratchpad,
|
|
host->ioaddr + SDHCI_TRANSFER_MODE);
|
|
return;
|
|
case SDHCI_BLOCK_SIZE:
|
|
val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
|
|
break;
|
|
}
|
|
esdhc_clrset_le(host, 0xffff, val, reg);
|
|
}
|
|
|
|
static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
|
|
{
|
|
u32 new_val;
|
|
|
|
switch (reg) {
|
|
case SDHCI_POWER_CONTROL:
|
|
/*
|
|
* FSL put some DMA bits here
|
|
* If your board has a regulator, code should be here
|
|
*/
|
|
return;
|
|
case SDHCI_HOST_CONTROL:
|
|
/* FSL messed up here, so we can just keep those three */
|
|
new_val = val & (SDHCI_CTRL_LED | \
|
|
SDHCI_CTRL_4BITBUS | \
|
|
SDHCI_CTRL_D3CD);
|
|
/* ensure the endianess */
|
|
new_val |= ESDHC_HOST_CONTROL_LE;
|
|
/* DMA mode bits are shifted */
|
|
new_val |= (val & SDHCI_CTRL_DMA_MASK) << 5;
|
|
|
|
esdhc_clrset_le(host, 0xffff, new_val, reg);
|
|
return;
|
|
}
|
|
esdhc_clrset_le(host, 0xff, val, reg);
|
|
|
|
/*
|
|
* The esdhc has a design violation to SDHC spec which tells
|
|
* that software reset should not affect card detection circuit.
|
|
* But esdhc clears its SYSCTL register bits [0..2] during the
|
|
* software reset. This will stop those clocks that card detection
|
|
* circuit relies on. To work around it, we turn the clocks on back
|
|
* to keep card detection circuit functional.
|
|
*/
|
|
if ((reg == SDHCI_SOFTWARE_RESET) && (val & 1))
|
|
esdhc_clrset_le(host, 0x7, 0x7, ESDHC_SYSTEM_CONTROL);
|
|
}
|
|
|
|
static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
|
|
return clk_get_rate(pltfm_host->clk);
|
|
}
|
|
|
|
static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
|
|
return clk_get_rate(pltfm_host->clk) / 256 / 16;
|
|
}
|
|
|
|
static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct pltfm_imx_data *imx_data = pltfm_host->priv;
|
|
struct esdhc_platform_data *boarddata = &imx_data->boarddata;
|
|
|
|
switch (boarddata->wp_type) {
|
|
case ESDHC_WP_GPIO:
|
|
if (gpio_is_valid(boarddata->wp_gpio))
|
|
return gpio_get_value(boarddata->wp_gpio);
|
|
case ESDHC_WP_CONTROLLER:
|
|
return !(readl(host->ioaddr + SDHCI_PRESENT_STATE) &
|
|
SDHCI_WRITE_PROTECT);
|
|
case ESDHC_WP_NONE:
|
|
break;
|
|
}
|
|
|
|
return -ENOSYS;
|
|
}
|
|
|
|
static struct sdhci_ops sdhci_esdhc_ops = {
|
|
.read_l = esdhc_readl_le,
|
|
.read_w = esdhc_readw_le,
|
|
.write_l = esdhc_writel_le,
|
|
.write_w = esdhc_writew_le,
|
|
.write_b = esdhc_writeb_le,
|
|
.set_clock = esdhc_set_clock,
|
|
.get_max_clock = esdhc_pltfm_get_max_clock,
|
|
.get_min_clock = esdhc_pltfm_get_min_clock,
|
|
.get_ro = esdhc_pltfm_get_ro,
|
|
};
|
|
|
|
static struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
|
|
.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_NO_HISPD_BIT
|
|
| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
|
|
| SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC
|
|
| SDHCI_QUIRK_BROKEN_CARD_DETECTION,
|
|
.ops = &sdhci_esdhc_ops,
|
|
};
|
|
|
|
static irqreturn_t cd_irq(int irq, void *data)
|
|
{
|
|
struct sdhci_host *sdhost = (struct sdhci_host *)data;
|
|
|
|
tasklet_schedule(&sdhost->card_tasklet);
|
|
return IRQ_HANDLED;
|
|
};
|
|
|
|
#ifdef CONFIG_OF
|
|
static int __devinit
|
|
sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
|
|
struct esdhc_platform_data *boarddata)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
|
|
if (!np)
|
|
return -ENODEV;
|
|
|
|
if (of_get_property(np, "fsl,card-wired", NULL))
|
|
boarddata->cd_type = ESDHC_CD_PERMANENT;
|
|
|
|
if (of_get_property(np, "fsl,cd-controller", NULL))
|
|
boarddata->cd_type = ESDHC_CD_CONTROLLER;
|
|
|
|
if (of_get_property(np, "fsl,wp-controller", NULL))
|
|
boarddata->wp_type = ESDHC_WP_CONTROLLER;
|
|
|
|
boarddata->cd_gpio = of_get_named_gpio(np, "cd-gpios", 0);
|
|
if (gpio_is_valid(boarddata->cd_gpio))
|
|
boarddata->cd_type = ESDHC_CD_GPIO;
|
|
|
|
boarddata->wp_gpio = of_get_named_gpio(np, "wp-gpios", 0);
|
|
if (gpio_is_valid(boarddata->wp_gpio))
|
|
boarddata->wp_type = ESDHC_WP_GPIO;
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static inline int
|
|
sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
|
|
struct esdhc_platform_data *boarddata)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
#endif
|
|
|
|
static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *of_id =
|
|
of_match_device(imx_esdhc_dt_ids, &pdev->dev);
|
|
struct sdhci_pltfm_host *pltfm_host;
|
|
struct sdhci_host *host;
|
|
struct esdhc_platform_data *boarddata;
|
|
struct clk *clk;
|
|
int err;
|
|
struct pltfm_imx_data *imx_data;
|
|
|
|
host = sdhci_pltfm_init(pdev, &sdhci_esdhc_imx_pdata);
|
|
if (IS_ERR(host))
|
|
return PTR_ERR(host);
|
|
|
|
pltfm_host = sdhci_priv(host);
|
|
|
|
imx_data = kzalloc(sizeof(struct pltfm_imx_data), GFP_KERNEL);
|
|
if (!imx_data) {
|
|
err = -ENOMEM;
|
|
goto err_imx_data;
|
|
}
|
|
|
|
if (of_id)
|
|
pdev->id_entry = of_id->data;
|
|
imx_data->devtype = pdev->id_entry->driver_data;
|
|
pltfm_host->priv = imx_data;
|
|
|
|
clk = clk_get(mmc_dev(host->mmc), NULL);
|
|
if (IS_ERR(clk)) {
|
|
dev_err(mmc_dev(host->mmc), "clk err\n");
|
|
err = PTR_ERR(clk);
|
|
goto err_clk_get;
|
|
}
|
|
clk_enable(clk);
|
|
pltfm_host->clk = clk;
|
|
|
|
if (!is_imx25_esdhc(imx_data))
|
|
host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
|
|
|
|
if (is_imx25_esdhc(imx_data) || is_imx35_esdhc(imx_data))
|
|
/* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */
|
|
host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK
|
|
| SDHCI_QUIRK_BROKEN_ADMA;
|
|
|
|
if (is_imx53_esdhc(imx_data))
|
|
imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT;
|
|
|
|
boarddata = &imx_data->boarddata;
|
|
if (sdhci_esdhc_imx_probe_dt(pdev, boarddata) < 0) {
|
|
if (!host->mmc->parent->platform_data) {
|
|
dev_err(mmc_dev(host->mmc), "no board data!\n");
|
|
err = -EINVAL;
|
|
goto no_board_data;
|
|
}
|
|
imx_data->boarddata = *((struct esdhc_platform_data *)
|
|
host->mmc->parent->platform_data);
|
|
}
|
|
|
|
/* write_protect */
|
|
if (boarddata->wp_type == ESDHC_WP_GPIO) {
|
|
err = gpio_request_one(boarddata->wp_gpio, GPIOF_IN, "ESDHC_WP");
|
|
if (err) {
|
|
dev_warn(mmc_dev(host->mmc),
|
|
"no write-protect pin available!\n");
|
|
boarddata->wp_gpio = -EINVAL;
|
|
}
|
|
} else {
|
|
boarddata->wp_gpio = -EINVAL;
|
|
}
|
|
|
|
/* card_detect */
|
|
if (boarddata->cd_type != ESDHC_CD_GPIO)
|
|
boarddata->cd_gpio = -EINVAL;
|
|
|
|
switch (boarddata->cd_type) {
|
|
case ESDHC_CD_GPIO:
|
|
err = gpio_request_one(boarddata->cd_gpio, GPIOF_IN, "ESDHC_CD");
|
|
if (err) {
|
|
dev_err(mmc_dev(host->mmc),
|
|
"no card-detect pin available!\n");
|
|
goto no_card_detect_pin;
|
|
}
|
|
|
|
err = request_irq(gpio_to_irq(boarddata->cd_gpio), cd_irq,
|
|
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
|
|
mmc_hostname(host->mmc), host);
|
|
if (err) {
|
|
dev_err(mmc_dev(host->mmc), "request irq error\n");
|
|
goto no_card_detect_irq;
|
|
}
|
|
/* fall through */
|
|
|
|
case ESDHC_CD_CONTROLLER:
|
|
/* we have a working card_detect back */
|
|
host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
|
|
break;
|
|
|
|
case ESDHC_CD_PERMANENT:
|
|
host->mmc->caps = MMC_CAP_NONREMOVABLE;
|
|
break;
|
|
|
|
case ESDHC_CD_NONE:
|
|
break;
|
|
}
|
|
|
|
err = sdhci_add_host(host);
|
|
if (err)
|
|
goto err_add_host;
|
|
|
|
return 0;
|
|
|
|
err_add_host:
|
|
if (gpio_is_valid(boarddata->cd_gpio))
|
|
free_irq(gpio_to_irq(boarddata->cd_gpio), host);
|
|
no_card_detect_irq:
|
|
if (gpio_is_valid(boarddata->cd_gpio))
|
|
gpio_free(boarddata->cd_gpio);
|
|
if (gpio_is_valid(boarddata->wp_gpio))
|
|
gpio_free(boarddata->wp_gpio);
|
|
no_card_detect_pin:
|
|
no_board_data:
|
|
clk_disable(pltfm_host->clk);
|
|
clk_put(pltfm_host->clk);
|
|
err_clk_get:
|
|
kfree(imx_data);
|
|
err_imx_data:
|
|
sdhci_pltfm_free(pdev);
|
|
return err;
|
|
}
|
|
|
|
static int __devexit sdhci_esdhc_imx_remove(struct platform_device *pdev)
|
|
{
|
|
struct sdhci_host *host = platform_get_drvdata(pdev);
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct pltfm_imx_data *imx_data = pltfm_host->priv;
|
|
struct esdhc_platform_data *boarddata = &imx_data->boarddata;
|
|
int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
|
|
|
|
sdhci_remove_host(host, dead);
|
|
|
|
if (gpio_is_valid(boarddata->wp_gpio))
|
|
gpio_free(boarddata->wp_gpio);
|
|
|
|
if (gpio_is_valid(boarddata->cd_gpio)) {
|
|
free_irq(gpio_to_irq(boarddata->cd_gpio), host);
|
|
gpio_free(boarddata->cd_gpio);
|
|
}
|
|
|
|
clk_disable(pltfm_host->clk);
|
|
clk_put(pltfm_host->clk);
|
|
kfree(imx_data);
|
|
|
|
sdhci_pltfm_free(pdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver sdhci_esdhc_imx_driver = {
|
|
.driver = {
|
|
.name = "sdhci-esdhc-imx",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = imx_esdhc_dt_ids,
|
|
},
|
|
.id_table = imx_esdhc_devtype,
|
|
.probe = sdhci_esdhc_imx_probe,
|
|
.remove = __devexit_p(sdhci_esdhc_imx_remove),
|
|
#ifdef CONFIG_PM
|
|
.suspend = sdhci_pltfm_suspend,
|
|
.resume = sdhci_pltfm_resume,
|
|
#endif
|
|
};
|
|
|
|
static int __init sdhci_esdhc_imx_init(void)
|
|
{
|
|
return platform_driver_register(&sdhci_esdhc_imx_driver);
|
|
}
|
|
module_init(sdhci_esdhc_imx_init);
|
|
|
|
static void __exit sdhci_esdhc_imx_exit(void)
|
|
{
|
|
platform_driver_unregister(&sdhci_esdhc_imx_driver);
|
|
}
|
|
module_exit(sdhci_esdhc_imx_exit);
|
|
|
|
MODULE_DESCRIPTION("SDHCI driver for Freescale i.MX eSDHC");
|
|
MODULE_AUTHOR("Wolfram Sang <w.sang@pengutronix.de>");
|
|
MODULE_LICENSE("GPL v2");
|