mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
e8a1d70117
Besides new bindings and additional descriptions of hardware blocks for
various SoCs and boards, the main new contents here is:
SoCs:
- Intel Agilex (SoCFPGA)
- NXP i.MX8MM (Quad Cortex-A53 with media/graphics focus)
New boards:
- Allwinner:
+ RerVision H3-DVK (H3)
+ Oceanic 5205 5inMFD (H6)
+ Beelink GS2 (H6)
+ Orange Pi 3 (H6)
- Rockchip:
+ Orange Pi RK3399
+ Nanopi NEO4
+ Veyron-Mighty Chromebook variant
- Amlogic:
+ SEI Robotics SEI510
- ST Micro:
+ stm32mp157a discovery1
+ stm32mp157c discovery2
- NXP:
+ Eckelmann ci4x10 (i.MX6DL)
+ i.MX8MM EVK (i.MX8MM)
+ ZII i.MX7 RPU2 (i.MX7)
+ ZII SPB4 (VF610)
+ Zii Ultra (i.MX8M)
+ TQ TQMa7S (i.MX7Solo)
+ TQ TQMa7D (i.MX7Dual)
+ Kobo Aura (i.MX50)
+ Menlosystems M53 (i.MX53)j
- Nvidia:
+ Jetson Nano (Tegra T210)
-----BEGIN PGP SIGNATURE-----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=lMVy
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM Device-tree updates from Olof Johansson:
"Besides new bindings and additional descriptions of hardware blocks
for various SoCs and boards, the main new contents here is:
SoCs:
- Intel Agilex (SoCFPGA)
- NXP i.MX8MM (Quad Cortex-A53 with media/graphics focus)
New boards:
- Allwinner:
+ RerVision H3-DVK (H3)
+ Oceanic 5205 5inMFD (H6)
+ Beelink GS2 (H6)
+ Orange Pi 3 (H6)
- Rockchip:
+ Orange Pi RK3399
+ Nanopi NEO4
+ Veyron-Mighty Chromebook variant
- Amlogic:
+ SEI Robotics SEI510
- ST Micro:
+ stm32mp157a discovery1
+ stm32mp157c discovery2
- NXP:
+ Eckelmann ci4x10 (i.MX6DL)
+ i.MX8MM EVK (i.MX8MM)
+ ZII i.MX7 RPU2 (i.MX7)
+ ZII SPB4 (VF610)
+ Zii Ultra (i.MX8M)
+ TQ TQMa7S (i.MX7Solo)
+ TQ TQMa7D (i.MX7Dual)
+ Kobo Aura (i.MX50)
+ Menlosystems M53 (i.MX53)j
- Nvidia:
+ Jetson Nano (Tegra T210)"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (593 commits)
arm64: dts: bitmain: Add UART pinctrl support for Sophon Edge
arm64: dts: bitmain: Add pinctrl support for BM1880 SoC
arm64: dts: bitmain: Add GPIO Line names for Sophon Edge board
arm64: dts: bitmain: Add GPIO support for BM1880 SoC
ARM: dts: gemini: Indent DIR-685 partition table
dt-bindings: hwmon (pwm-fan) Remove dead "cooling-*-state" properties
ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY
arm64: dts: msm8998: thermal: Restrict thermal zone name length to under 20
arm64: dts: msm8998: thermal: Fix number of supported sensors
arm64: dts: msm8998-mtp: thermal: Remove skin and battery thermal zones
arm64: dts: exynos: Move fixed-clocks out of soc
arm64: dts: exynos: Move pmu and timer nodes out of soc
ARM: dts: s5pv210: Fix camera clock provider on Goni board
ARM: dts: exynos: Properly override node to use MDMA0 on Universal C210
ARM: dts: exynos: Move fixed-clocks out of soc on Exynos3250
ARM: dts: exynos: Remove unneeded address/size cells from fixed-clock on Exynos3250
ARM: dts: exynos: Move pmu and timer nodes out of soc
arm64: dts: rockchip: fix IO domain voltage setting of APIO5 on rockpro64
arm64: dts: db820c: Add sound card support
arm64: dts: apq8096-db820c: Add HDMI display support
...
58 lines
1.7 KiB
Plaintext
58 lines
1.7 KiB
Plaintext
Bindings for a fan connected to the PWM lines
|
|
|
|
Required properties:
|
|
- compatible : "pwm-fan"
|
|
- pwms : the PWM that is used to control the PWM fan
|
|
- cooling-levels : PWM duty cycle values in a range from 0 to 255
|
|
which correspond to thermal cooling states
|
|
|
|
Optional properties:
|
|
- fan-supply : phandle to the regulator that provides power to the fan
|
|
- interrupts : This contains a single interrupt specifier which
|
|
describes the tachometer output of the fan as an
|
|
interrupt source. The output signal must generate a
|
|
defined number of interrupts per fan revolution, which
|
|
require that it must be self resetting edge interrupts.
|
|
See interrupt-controller/interrupts.txt for the format.
|
|
- pulses-per-revolution : define the tachometer pulses per fan revolution as
|
|
an integer (default is 2 interrupts per revolution).
|
|
The value must be greater than zero.
|
|
|
|
Example:
|
|
fan0: pwm-fan {
|
|
compatible = "pwm-fan";
|
|
#cooling-cells = <2>;
|
|
pwms = <&pwm 0 10000 0>;
|
|
cooling-levels = <0 102 170 230>;
|
|
};
|
|
|
|
thermal-zones {
|
|
cpu_thermal: cpu-thermal {
|
|
thermal-sensors = <&tmu 0>;
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
trips {
|
|
cpu_alert1: cpu-alert1 {
|
|
temperature = <100000>; /* millicelsius */
|
|
hysteresis = <2000>; /* millicelsius */
|
|
type = "passive";
|
|
};
|
|
};
|
|
cooling-maps {
|
|
map0 {
|
|
trip = <&cpu_alert1>;
|
|
cooling-device = <&fan0 0 1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
Example 2:
|
|
fan0: pwm-fan {
|
|
compatible = "pwm-fan";
|
|
pwms = <&pwm 0 40000 0>;
|
|
fan-supply = <®_fan>;
|
|
interrupt-parent = <&gpio5>;
|
|
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
|
|
pulses-per-revolution = <2>;
|
|
};
|