linux_dsm_epyc7002/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
Marc Zyngier 918d98db8c DT: omap4/5: add binding for the wake-up generator
Add a binding for the OMAP4/5 wake-up generator, which acts as
an interrupt controller feeding into the GIC.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1426088629-15377-7-git-send-email-marc.zyngier@arm.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-15 00:56:08 +00:00

34 lines
1.2 KiB
Plaintext

TI OMAP4 Wake-up Generator
All TI OMAP4/5 (and their derivatives) an interrupt controller that
routes interrupts to the GIC, and also serves as a wakeup source. It
is also referred to as "WUGEN-MPU", hence the name of the binding.
Reguired properties:
- compatible : should contain at least "ti,omap4-wugen-mpu" or
"ti,omap5-wugen-mpu"
- reg : Specifies base physical address and size of the registers.
- interrupt-controller : Identifies the node as an interrupt controller.
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The value must be 3.
- interrupt-parent : a phandle to the GIC these interrupts are routed
to.
Notes:
- Because this HW ultimately routes interrupts to the GIC, the
interrupt specifier must be that of the GIC.
- Only SPIs can use the WUGEN as an interrupt parent. SGIs and PPIs
are explicitly forbiden.
Example:
wakeupgen: interrupt-controller@48281000 {
compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x48281000 0x1000>;
interrupt-parent = <&gic>;
};