mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-06 23:56:40 +07:00
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
208 lines
9.5 KiB
Plaintext
208 lines
9.5 KiB
Plaintext
sb1000 is a module network device driver for the General Instrument (also known
|
|
as NextLevel) SURFboard1000 internal cable modem board. This is an ISA card
|
|
which is used by a number of cable TV companies to provide cable modem access.
|
|
It's a one-way downstream-only cable modem, meaning that your upstream net link
|
|
is provided by your regular phone modem.
|
|
|
|
This driver was written by Franco Venturi <fventuri@mediaone.net>. He deserves
|
|
a great deal of thanks for this wonderful piece of code!
|
|
|
|
-----------------------------------------------------------------------------
|
|
|
|
Support for this device is now a part of the standard Linux kernel. The
|
|
driver source code file is drivers/net/sb1000.c. In addition to this
|
|
you will need:
|
|
|
|
1.) The "cmconfig" program. This is a utility which supplements "ifconfig"
|
|
to configure the cable modem and network interface (usually called "cm0");
|
|
and
|
|
|
|
2.) Several PPP scripts which live in /etc/ppp to make connecting via your
|
|
cable modem easy.
|
|
|
|
These utilities can be obtained from:
|
|
|
|
http://www.jacksonville.net/~fventuri/
|
|
|
|
in Franco's original source code distribution .tar.gz file. Support for
|
|
the sb1000 driver can be found at:
|
|
|
|
http://home.adelphia.net/~siglercm/sb1000.html
|
|
http://linuxpower.cx/~cable/
|
|
|
|
along with these utilities.
|
|
|
|
3.) The standard isapnp tools. These are necessary to configure your SB1000
|
|
card at boot time (or afterwards by hand) since it's a PnP card.
|
|
|
|
If you don't have these installed as a standard part of your Linux
|
|
distribution, you can find them at:
|
|
|
|
http://www.roestock.demon.co.uk/isapnptools/
|
|
|
|
or check your Linux distribution binary CD or their web site. For help with
|
|
isapnp, pnpdump, or /etc/isapnp.conf, go to:
|
|
|
|
http://www.roestock.demon.co.uk/isapnptools/isapnpfaq.html
|
|
|
|
-----------------------------------------------------------------------------
|
|
|
|
To make the SB1000 card work, follow these steps:
|
|
|
|
1.) Run `make config', or `make menuconfig', or `make xconfig', whichever
|
|
you prefer, in the top kernel tree directory to set up your kernel
|
|
configuration. Make sure to say "Y" to "Prompt for development drivers"
|
|
and to say "M" to the sb1000 driver. Also say "Y" or "M" to all the standard
|
|
networking questions to get TCP/IP and PPP networking support.
|
|
|
|
2.) *BEFORE* you build the kernel, edit drivers/net/sb1000.c. Make sure
|
|
to redefine the value of READ_DATA_PORT to match the I/O address used
|
|
by isapnp to access your PnP cards. This is the value of READPORT in
|
|
/etc/isapnp.conf or given by the output of pnpdump.
|
|
|
|
3.) Build and install the kernel and modules as usual.
|
|
|
|
4.) Boot your new kernel following the usual procedures.
|
|
|
|
5.) Set up to configure the new SB1000 PnP card by capturing the output
|
|
of "pnpdump" to a file and editing this file to set the correct I/O ports,
|
|
IRQ, and DMA settings for all your PnP cards. Make sure none of the settings
|
|
conflict with one another. Then test this configuration by running the
|
|
"isapnp" command with your new config file as the input. Check for
|
|
errors and fix as necessary. (As an aside, I use I/O ports 0x110 and
|
|
0x310 and IRQ 11 for my SB1000 card and these work well for me. YMMV.)
|
|
Then save the finished config file as /etc/isapnp.conf for proper configuration
|
|
on subsequent reboots.
|
|
|
|
6.) Download the original file sb1000-1.1.2.tar.gz from Franco's site or one of
|
|
the others referenced above. As root, unpack it into a temporary directory and
|
|
do a `make cmconfig' and then `install -c cmconfig /usr/local/sbin'. Don't do
|
|
`make install' because it expects to find all the utilities built and ready for
|
|
installation, not just cmconfig.
|
|
|
|
7.) As root, copy all the files under the ppp/ subdirectory in Franco's
|
|
tar file into /etc/ppp, being careful not to overwrite any files that are
|
|
already in there. Then modify ppp@gi-on to set the correct login name,
|
|
phone number, and frequency for the cable modem. Also edit pap-secrets
|
|
to specify your login name and password and any site-specific information
|
|
you need.
|
|
|
|
8.) Be sure to modify /etc/ppp/firewall to use ipchains instead of
|
|
the older ipfwadm commands from the 2.0.x kernels. There's a neat utility to
|
|
convert ipfwadm commands to ipchains commands:
|
|
|
|
http://users.dhp.com/~whisper/ipfwadm2ipchains/
|
|
|
|
You may also wish to modify the firewall script to implement a different
|
|
firewalling scheme.
|
|
|
|
9.) Start the PPP connection via the script /etc/ppp/ppp@gi-on. You must be
|
|
root to do this. It's better to use a utility like sudo to execute
|
|
frequently used commands like this with root permissions if possible. If you
|
|
connect successfully the cable modem interface will come up and you'll see a
|
|
driver message like this at the console:
|
|
|
|
cm0: sb1000 at (0x110,0x310), csn 1, S/N 0x2a0d16d8, IRQ 11.
|
|
sb1000.c:v1.1.2 6/01/98 (fventuri@mediaone.net)
|
|
|
|
The "ifconfig" command should show two new interfaces, ppp0 and cm0.
|
|
The command "cmconfig cm0" will give you information about the cable modem
|
|
interface.
|
|
|
|
10.) Try pinging a site via `ping -c 5 www.yahoo.com', for example. You should
|
|
see packets received.
|
|
|
|
11.) If you can't get site names (like www.yahoo.com) to resolve into
|
|
IP addresses (like 204.71.200.67), be sure your /etc/resolv.conf file
|
|
has no syntax errors and has the right nameserver IP addresses in it.
|
|
If this doesn't help, try something like `ping -c 5 204.71.200.67' to
|
|
see if the networking is running but the DNS resolution is where the
|
|
problem lies.
|
|
|
|
12.) If you still have problems, go to the support web sites mentioned above
|
|
and read the information and documentation there.
|
|
|
|
-----------------------------------------------------------------------------
|
|
|
|
Common problems:
|
|
|
|
1.) Packets go out on the ppp0 interface but don't come back on the cm0
|
|
interface. It looks like I'm connected but I can't even ping any
|
|
numerical IP addresses. (This happens predominantly on Debian systems due
|
|
to a default boot-time configuration script.)
|
|
|
|
Solution -- As root `echo 0 > /proc/sys/net/ipv4/conf/cm0/rp_filter' so it
|
|
can share the same IP address as the ppp0 interface. Note that this
|
|
command should probably be added to the /etc/ppp/cablemodem script
|
|
*right*between* the "/sbin/ifconfig" and "/sbin/cmconfig" commands.
|
|
You may need to do this to /proc/sys/net/ipv4/conf/ppp0/rp_filter as well.
|
|
If you do this to /proc/sys/net/ipv4/conf/default/rp_filter on each reboot
|
|
(in rc.local or some such) then any interfaces can share the same IP
|
|
addresses.
|
|
|
|
2.) I get "unresolved symbol" error messages on executing `insmod sb1000.o'.
|
|
|
|
Solution -- You probably have a non-matching kernel source tree and
|
|
/usr/include/linux and /usr/include/asm header files. Make sure you
|
|
install the correct versions of the header files in these two directories.
|
|
Then rebuild and reinstall the kernel.
|
|
|
|
3.) When isapnp runs it reports an error, and my SB1000 card isn't working.
|
|
|
|
Solution -- There's a problem with later versions of isapnp using the "(CHECK)"
|
|
option in the lines that allocate the two I/O addresses for the SB1000 card.
|
|
This first popped up on RH 6.0. Delete "(CHECK)" for the SB1000 I/O addresses.
|
|
Make sure they don't conflict with any other pieces of hardware first! Then
|
|
rerun isapnp and go from there.
|
|
|
|
4.) I can't execute the /etc/ppp/ppp@gi-on file.
|
|
|
|
Solution -- As root do `chmod ug+x /etc/ppp/ppp@gi-on'.
|
|
|
|
5.) The firewall script isn't working (with 2.2.x and higher kernels).
|
|
|
|
Solution -- Use the ipfwadm2ipchains script referenced above to convert the
|
|
/etc/ppp/firewall script from the deprecated ipfwadm commands to ipchains.
|
|
|
|
6.) I'm getting *tons* of firewall deny messages in the /var/kern.log,
|
|
/var/messages, and/or /var/syslog files, and they're filling up my /var
|
|
partition!!!
|
|
|
|
Solution -- First, tell your ISP that you're receiving DoS (Denial of Service)
|
|
and/or portscanning (UDP connection attempts) attacks! Look over the deny
|
|
messages to figure out what the attack is and where it's coming from. Next,
|
|
edit /etc/ppp/cablemodem and make sure the ",nobroadcast" option is turned on
|
|
to the "cmconfig" command (uncomment that line). If you're not receiving these
|
|
denied packets on your broadcast interface (IP address xxx.yyy.zzz.255
|
|
typically), then someone is attacking your machine in particular. Be careful
|
|
out there....
|
|
|
|
7.) Everything seems to work fine but my computer locks up after a while
|
|
(and typically during a lengthy download through the cable modem)!
|
|
|
|
Solution -- You may need to add a short delay in the driver to 'slow down' the
|
|
SURFboard because your PC might not be able to keep up with the transfer rate
|
|
of the SB1000. To do this, it's probably best to download Franco's
|
|
sb1000-1.1.2.tar.gz archive and build and install sb1000.o manually. You'll
|
|
want to edit the 'Makefile' and look for the 'SB1000_DELAY'
|
|
define. Uncomment those 'CFLAGS' lines (and comment out the default ones)
|
|
and try setting the delay to something like 60 microseconds with:
|
|
'-DSB1000_DELAY=60'. Then do `make' and as root `make install' and try
|
|
it out. If it still doesn't work or you like playing with the driver, you may
|
|
try other numbers. Remember though that the higher the delay, the slower the
|
|
driver (which slows down the rest of the PC too when it is actively
|
|
used). Thanks to Ed Daiga for this tip!
|
|
|
|
-----------------------------------------------------------------------------
|
|
|
|
Credits: This README came from Franco Venturi's original README file which is
|
|
still supplied with his driver .tar.gz archive. I and all other sb1000 users
|
|
owe Franco a tremendous "Thank you!" Additional thanks goes to Carl Patten
|
|
and Ralph Bonnell who are now managing the Linux SB1000 web site, and to
|
|
the SB1000 users who reported and helped debug the common problems listed
|
|
above.
|
|
|
|
|
|
Clemmitt Sigler
|
|
csigler@vt.edu
|