mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2025-02-25 07:20:17 +07:00
2a4cfd1022
When trying to play a 8kHz file with codec in slave mode we get the following error on a mx28evk: $ aplay -Dhw:0,0 stereo_8k.wav Playing WAVE 'stereo_8k.wav' : Signed 16 bit Little Endian, Rate 8000 Hz, Stereo [ 21.218647] sgtl5000 0-000a: PLL not supported in slave mode [ 21.224559] sgtl5000 0-000a: 128 ratio is not supported. SYS_MCLK needs to be 256, 384 or 512 * fs [ 21.233687] sgtl5000 0-000a: ASoC: can't set sgtl5000 hw params: -22 aplay: set_params:1123: Unable to install hw params: This error happens because we are using 'sys_fs' instead of 'frame_rate' in the valid ratio check. Use the real'frame_rate' so that the ratio is correctly calculated and the playback can run. sgtl5000 codec manual states that in 'Synchronous SYS_MCLK input' mode that the following SYS_CLK frequencies are allowed: 256*fs, 384*fs, 512*fs. , where fs is the sampling frequency, which can be in the range of: 8, 11.025, 16, 22.5, 32, 44.1, 48, 96 kHz. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|---|---|---|
| .. | ||
| adi | ||
| atmel | ||
| au1x | ||
| bcm | ||
| blackfin | ||
| cirrus | ||
| codecs | ||
| davinci | ||
| dwc | ||
| fsl | ||
| generic | ||
| intel | ||
| jz4740 | ||
| kirkwood | ||
| mxs | ||
| nuc900 | ||
| omap | ||
| pxa | ||
| rockchip | ||
| samsung | ||
| sh | ||
| sirf | ||
| spear | ||
| tegra | ||
| txx9 | ||
| ux500 | ||
| Kconfig | ||
| Makefile | ||
| soc-cache.c | ||
| soc-compress.c | ||
| soc-core.c | ||
| soc-dapm.c | ||
| soc-devres.c | ||
| soc-generic-dmaengine-pcm.c | ||
| soc-io.c | ||
| soc-jack.c | ||
| soc-pcm.c | ||
| soc-utils.c | ||