linux_dsm_epyc7002/sound/soc/tegra/Kconfig
Laxman Dewangan 9891e32405 ASoC: tegra: remove support of legacy DMA driver based access
Remove the support code which uses the legacy APB DMA driver
for accessing the I2S FIFO.
The driver will use the dmaengine based APB DMA driver for
accessing reqding/writing to I2S FIFO.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-17 09:34:44 -06:00

90 lines
2.9 KiB
Plaintext

config SND_SOC_TEGRA
tristate "SoC Audio for the Tegra System-on-Chip"
depends on ARCH_TEGRA && TEGRA20_APB_DMA
select REGMAP_MMIO
select SND_SOC_DMAENGINE_PCM if TEGRA20_APB_DMA
help
Say Y or M here if you want support for SoC audio on Tegra.
config SND_SOC_TEGRA20_DAS
tristate
depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC
help
Say Y or M if you want to add support for the Tegra20 DAS module.
You will also need to select the individual machine drivers to
support below.
config SND_SOC_TEGRA20_I2S
tristate
depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC
select SND_SOC_TEGRA20_DAS
help
Say Y or M if you want to add support for codecs attached to the
Tegra20 I2S interface. You will also need to select the individual
machine drivers to support below.
config SND_SOC_TEGRA20_SPDIF
tristate
depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC
default m
help
Say Y or M if you want to add support for the Tegra20 SPDIF interface.
You will also need to select the individual machine drivers to support
below.
config SND_SOC_TEGRA30_AHUB
tristate
depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC
help
Say Y or M if you want to add support for the Tegra20 AHUB module.
You will also need to select the individual machine drivers to
support below.
config SND_SOC_TEGRA30_I2S
tristate
depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC
select SND_SOC_TEGRA30_AHUB
help
Say Y or M if you want to add support for codecs attached to the
Tegra30 I2S interface. You will also need to select the individual
machine drivers to support below.
config SND_SOC_TEGRA_WM8753
tristate "SoC Audio support for Tegra boards using a WM8753 codec"
depends on SND_SOC_TEGRA && I2C
select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
select SND_SOC_WM8753
help
Say Y or M here if you want to add support for SoC audio on Tegra
boards using the WM8753 codec, such as Whistler.
config SND_SOC_TEGRA_WM8903
tristate "SoC Audio support for Tegra boards using a WM8903 codec"
depends on SND_SOC_TEGRA && I2C
select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
select SND_SOC_WM8903
help
Say Y or M here if you want to add support for SoC audio on Tegra
boards using the WM8093 codec. Currently, the supported boards are
Harmony, Ventana, Seaboard, Kaen, and Aebl.
config SND_SOC_TEGRA_TRIMSLICE
tristate "SoC Audio support for TrimSlice board"
depends on SND_SOC_TEGRA && I2C
select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
select SND_SOC_TLV320AIC23
help
Say Y or M here if you want to add support for SoC audio on the
TrimSlice platform.
config SND_SOC_TEGRA_ALC5632
tristate "SoC Audio support for Tegra boards using an ALC5632 codec"
depends on SND_SOC_TEGRA && I2C
select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
select SND_SOC_ALC5632
help
Say Y or M here if you want to add support for SoC audio on the
Toshiba AC100 netbook.