Florian Fainelli 0ed41b3388 phy: brcm-sata: Correct MDIO operations for 40nm platforms ... The logic to write to MDIO registers on 40nm platforms was wrong because it would use the port number as an offset from the base address rather than the bank address of the PHY. This is hardly noticeable because the only programming we do is enabling SSC or not, which is not really causing an observable functional change. Correct that mistake by passing down the struct brcm_sata_port structure down to the brcm_sata_mdio_wr() and brcm_sata_mdio_rd() functions and do the proper offsetting for 28nm, respectively 40nm platforms from there. This means that brcm_sata_pcb_base() is now useless and is therefore removed. Fixes: c1602a1a0f ("phy: phy_brcmstb_sata: add support for MIPS-based platforms") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>		2020-02-21 14:01:47 +05:30
..
Kconfig	phy: Enable compile testing for some of drivers	2020-01-14 10:50:19 +05:30
Makefile	phy: usb: Add support for new Synopsys USB controller on the 7216	2020-01-08 12:58:06 +05:30
phy-bcm-cygnus-pcie.c	phy: Convert to using %pOFn instead of device_node.name	2018-09-25 16:10:07 +05:30
phy-bcm-kona-usb2.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282	2019-06-05 17:36:37 +02:00
phy-bcm-ns2-pcie.c	phy: Group vendor specific phy drivers	2017-06-01 15:28:33 +05:30
phy-bcm-ns2-usbdrd.c	extcon: Split out extcon header file for consumer and provider device	2017-10-23 14:07:58 +09:00
phy-bcm-ns-usb2.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500	2019-06-19 17:09:55 +02:00
phy-bcm-ns-usb3.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500	2019-06-19 17:09:55 +02:00
phy-bcm-sr-pcie.c	phy: bcm-sr-pcie: Change operation when PIPEMUX=1	2019-02-07 11:11:06 +05:30
phy-bcm-sr-usb.c	phy: sr-usb: Add Stingray USB PHY driver	2019-04-17 14:12:48 +05:30
phy-brcm-sata.c	phy: brcm-sata: Correct MDIO operations for 40nm platforms	2020-02-21 14:01:47 +05:30
phy-brcm-usb-init-synopsys.c	phy: usb: Add support for wake and USB low power mode for 7211 S2/S5	2020-01-08 12:58:06 +05:30
phy-brcm-usb-init.c	phy: usb: Add support for wake and USB low power mode for 7211 S2/S5	2020-01-08 12:58:06 +05:30
phy-brcm-usb-init.h	phy: usb: Add support for wake and USB low power mode for 7211 S2/S5	2020-01-08 12:58:06 +05:30
phy-brcm-usb.c	phy: usb: Add support for wake and USB low power mode for 7211 S2/S5	2020-01-08 12:58:06 +05:30