mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
3e712a03d0
QoS nodes keep information about priorites etc on the interconnect and loose state when the power-domain gets disabled. Therefore the power-domain driver stores the settings of available qos nodes and restores them when the power-domain gets enabled again. So add the qos nodes found on the Cortex-A9 socs from Rockchip, so that they can then be connected to the power-domains. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
470 lines
10 KiB
Plaintext
470 lines
10 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2013 MundoReader S.L.
|
|
* Author: Heiko Stuebner <heiko@sntech.de>
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/soc/rockchip,boot-mode.h>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
interrupt-parent = <&gic>;
|
|
|
|
aliases {
|
|
ethernet0 = &emac;
|
|
i2c0 = &i2c0;
|
|
i2c1 = &i2c1;
|
|
i2c2 = &i2c2;
|
|
i2c3 = &i2c3;
|
|
i2c4 = &i2c4;
|
|
mshc0 = &emmc;
|
|
mshc1 = &mmc0;
|
|
mshc2 = &mmc1;
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
serial2 = &uart2;
|
|
serial3 = &uart3;
|
|
spi0 = &spi0;
|
|
spi1 = &spi1;
|
|
};
|
|
|
|
amba {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
dmac1_s: dma-controller@20018000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x20018000 0x4000>;
|
|
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
|
#dma-cells = <1>;
|
|
arm,pl330-broken-no-flushp;
|
|
clocks = <&cru ACLK_DMA1>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
dmac1_ns: dma-controller@2001c000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x2001c000 0x4000>;
|
|
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
|
#dma-cells = <1>;
|
|
arm,pl330-broken-no-flushp;
|
|
clocks = <&cru ACLK_DMA1>;
|
|
clock-names = "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
dmac2: dma-controller@20078000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x20078000 0x4000>;
|
|
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
|
|
#dma-cells = <1>;
|
|
arm,pl330-broken-no-flushp;
|
|
clocks = <&cru ACLK_DMA2>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
};
|
|
|
|
xin24m: oscillator {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "xin24m";
|
|
};
|
|
|
|
gpu: gpu@10090000 {
|
|
compatible = "arm,mali-400";
|
|
reg = <0x10090000 0x10000>;
|
|
clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
|
|
clock-names = "core", "bus";
|
|
assigned-clocks = <&cru ACLK_GPU>;
|
|
assigned-clock-rates = <100000000>;
|
|
resets = <&cru SRST_GPU>;
|
|
status = "disabled";
|
|
};
|
|
|
|
L2: l2-cache-controller@10138000 {
|
|
compatible = "arm,pl310-cache";
|
|
reg = <0x10138000 0x1000>;
|
|
cache-unified;
|
|
cache-level = <2>;
|
|
};
|
|
|
|
scu@1013c000 {
|
|
compatible = "arm,cortex-a9-scu";
|
|
reg = <0x1013c000 0x100>;
|
|
};
|
|
|
|
global_timer: global-timer@1013c200 {
|
|
compatible = "arm,cortex-a9-global-timer";
|
|
reg = <0x1013c200 0x20>;
|
|
interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
|
|
clocks = <&cru CORE_PERI>;
|
|
};
|
|
|
|
local_timer: local-timer@1013c600 {
|
|
compatible = "arm,cortex-a9-twd-timer";
|
|
reg = <0x1013c600 0x20>;
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
|
|
clocks = <&cru CORE_PERI>;
|
|
};
|
|
|
|
gic: interrupt-controller@1013d000 {
|
|
compatible = "arm,cortex-a9-gic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
reg = <0x1013d000 0x1000>,
|
|
<0x1013c100 0x0100>;
|
|
};
|
|
|
|
uart0: serial@10124000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x10124000 0x400>;
|
|
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <1>;
|
|
clock-names = "baudclk", "apb_pclk";
|
|
clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@10126000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x10126000 0x400>;
|
|
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <1>;
|
|
clock-names = "baudclk", "apb_pclk";
|
|
clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
qos_gpu: qos@1012d000 {
|
|
compatible = "syscon";
|
|
reg = <0x1012d000 0x20>;
|
|
};
|
|
|
|
qos_vpu: qos@1012e000 {
|
|
compatible = "syscon";
|
|
reg = <0x1012e000 0x20>;
|
|
};
|
|
|
|
qos_lcdc0: qos@1012f000 {
|
|
compatible = "syscon";
|
|
reg = <0x1012f000 0x20>;
|
|
};
|
|
|
|
qos_cif0: qos@1012f080 {
|
|
compatible = "syscon";
|
|
reg = <0x1012f080 0x20>;
|
|
};
|
|
|
|
qos_ipp: qos@1012f100 {
|
|
compatible = "syscon";
|
|
reg = <0x1012f100 0x20>;
|
|
};
|
|
|
|
qos_lcdc1: qos@1012f180 {
|
|
compatible = "syscon";
|
|
reg = <0x1012f180 0x20>;
|
|
};
|
|
|
|
qos_cif1: qos@1012f200 {
|
|
compatible = "syscon";
|
|
reg = <0x1012f200 0x20>;
|
|
};
|
|
|
|
qos_rga: qos@1012f280 {
|
|
compatible = "syscon";
|
|
reg = <0x1012f280 0x20>;
|
|
};
|
|
|
|
usb_otg: usb@10180000 {
|
|
compatible = "rockchip,rk3066-usb", "snps,dwc2";
|
|
reg = <0x10180000 0x40000>;
|
|
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru HCLK_OTG0>;
|
|
clock-names = "otg";
|
|
dr_mode = "otg";
|
|
g-np-tx-fifo-size = <16>;
|
|
g-rx-fifo-size = <275>;
|
|
g-tx-fifo-size = <256 128 128 64 64 32>;
|
|
phys = <&usbphy0>;
|
|
phy-names = "usb2-phy";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb_host: usb@101c0000 {
|
|
compatible = "snps,dwc2";
|
|
reg = <0x101c0000 0x40000>;
|
|
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru HCLK_OTG1>;
|
|
clock-names = "otg";
|
|
dr_mode = "host";
|
|
phys = <&usbphy1>;
|
|
phy-names = "usb2-phy";
|
|
status = "disabled";
|
|
};
|
|
|
|
emac: ethernet@10204000 {
|
|
compatible = "snps,arc-emac";
|
|
reg = <0x10204000 0x3c>;
|
|
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
rockchip,grf = <&grf>;
|
|
|
|
clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
|
|
clock-names = "hclk", "macref";
|
|
max-speed = <100>;
|
|
phy-mode = "rmii";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc0: dwmmc@10214000 {
|
|
compatible = "rockchip,rk2928-dw-mshc";
|
|
reg = <0x10214000 0x1000>;
|
|
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
|
|
clock-names = "biu", "ciu";
|
|
dmas = <&dmac2 1>;
|
|
dma-names = "rx-tx";
|
|
fifo-depth = <256>;
|
|
resets = <&cru SRST_SDMMC>;
|
|
reset-names = "reset";
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc1: dwmmc@10218000 {
|
|
compatible = "rockchip,rk2928-dw-mshc";
|
|
reg = <0x10218000 0x1000>;
|
|
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>;
|
|
clock-names = "biu", "ciu";
|
|
dmas = <&dmac2 3>;
|
|
dma-names = "rx-tx";
|
|
fifo-depth = <256>;
|
|
resets = <&cru SRST_SDIO>;
|
|
reset-names = "reset";
|
|
status = "disabled";
|
|
};
|
|
|
|
emmc: dwmmc@1021c000 {
|
|
compatible = "rockchip,rk2928-dw-mshc";
|
|
reg = <0x1021c000 0x1000>;
|
|
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
|
|
clock-names = "biu", "ciu";
|
|
dmas = <&dmac2 4>;
|
|
dma-names = "rx-tx";
|
|
fifo-depth = <256>;
|
|
resets = <&cru SRST_EMMC>;
|
|
reset-names = "reset";
|
|
status = "disabled";
|
|
};
|
|
|
|
pmu: pmu@20004000 {
|
|
compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd";
|
|
reg = <0x20004000 0x100>;
|
|
|
|
reboot-mode {
|
|
compatible = "syscon-reboot-mode";
|
|
offset = <0x40>;
|
|
mode-normal = <BOOT_NORMAL>;
|
|
mode-recovery = <BOOT_RECOVERY>;
|
|
mode-bootloader = <BOOT_FASTBOOT>;
|
|
mode-loader = <BOOT_BL_DOWNLOAD>;
|
|
};
|
|
};
|
|
|
|
grf: grf@20008000 {
|
|
compatible = "syscon";
|
|
reg = <0x20008000 0x200>;
|
|
};
|
|
|
|
i2c0: i2c@2002d000 {
|
|
compatible = "rockchip,rk3066-i2c";
|
|
reg = <0x2002d000 0x1000>;
|
|
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
rockchip,grf = <&grf>;
|
|
|
|
clock-names = "i2c";
|
|
clocks = <&cru PCLK_I2C0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@2002f000 {
|
|
compatible = "rockchip,rk3066-i2c";
|
|
reg = <0x2002f000 0x1000>;
|
|
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
rockchip,grf = <&grf>;
|
|
|
|
clocks = <&cru PCLK_I2C1>;
|
|
clock-names = "i2c";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm0: pwm@20030000 {
|
|
compatible = "rockchip,rk2928-pwm";
|
|
reg = <0x20030000 0x10>;
|
|
#pwm-cells = <2>;
|
|
clocks = <&cru PCLK_PWM01>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm1: pwm@20030010 {
|
|
compatible = "rockchip,rk2928-pwm";
|
|
reg = <0x20030010 0x10>;
|
|
#pwm-cells = <2>;
|
|
clocks = <&cru PCLK_PWM01>;
|
|
status = "disabled";
|
|
};
|
|
|
|
wdt: watchdog@2004c000 {
|
|
compatible = "snps,dw-wdt";
|
|
reg = <0x2004c000 0x100>;
|
|
clocks = <&cru PCLK_WDT>;
|
|
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm2: pwm@20050020 {
|
|
compatible = "rockchip,rk2928-pwm";
|
|
reg = <0x20050020 0x10>;
|
|
#pwm-cells = <2>;
|
|
clocks = <&cru PCLK_PWM23>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm3: pwm@20050030 {
|
|
compatible = "rockchip,rk2928-pwm";
|
|
reg = <0x20050030 0x10>;
|
|
#pwm-cells = <2>;
|
|
clocks = <&cru PCLK_PWM23>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@20056000 {
|
|
compatible = "rockchip,rk3066-i2c";
|
|
reg = <0x20056000 0x1000>;
|
|
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
rockchip,grf = <&grf>;
|
|
|
|
clocks = <&cru PCLK_I2C2>;
|
|
clock-names = "i2c";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@2005a000 {
|
|
compatible = "rockchip,rk3066-i2c";
|
|
reg = <0x2005a000 0x1000>;
|
|
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
rockchip,grf = <&grf>;
|
|
|
|
clocks = <&cru PCLK_I2C3>;
|
|
clock-names = "i2c";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c4: i2c@2005e000 {
|
|
compatible = "rockchip,rk3066-i2c";
|
|
reg = <0x2005e000 0x1000>;
|
|
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
rockchip,grf = <&grf>;
|
|
|
|
clocks = <&cru PCLK_I2C4>;
|
|
clock-names = "i2c";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@20064000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x20064000 0x400>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <1>;
|
|
clock-names = "baudclk", "apb_pclk";
|
|
clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@20068000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x20068000 0x400>;
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <1>;
|
|
clock-names = "baudclk", "apb_pclk";
|
|
clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
saradc: saradc@2006c000 {
|
|
compatible = "rockchip,saradc";
|
|
reg = <0x2006c000 0x100>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
#io-channel-cells = <1>;
|
|
clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
|
|
clock-names = "saradc", "apb_pclk";
|
|
resets = <&cru SRST_SARADC>;
|
|
reset-names = "saradc-apb";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi0: spi@20070000 {
|
|
compatible = "rockchip,rk3066-spi";
|
|
clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
|
|
clock-names = "spiclk", "apb_pclk";
|
|
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x20070000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
dmas = <&dmac2 10>, <&dmac2 11>;
|
|
dma-names = "tx", "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi1: spi@20074000 {
|
|
compatible = "rockchip,rk3066-spi";
|
|
clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
|
|
clock-names = "spiclk", "apb_pclk";
|
|
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x20074000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
dmas = <&dmac2 12>, <&dmac2 13>;
|
|
dma-names = "tx", "rx";
|
|
status = "disabled";
|
|
};
|
|
};
|