linux_dsm_epyc7002/drivers/gpu/drm/i915/i915_drv.c

403 lines
10 KiB
C

/* i915_drv.c -- i830,i845,i855,i865,i915 driver -*- linux-c -*-
*/
/*
*
* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
* IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
#include <linux/device.h>
#include "drmP.h"
#include "drm.h"
#include "i915_drm.h"
#include "i915_drv.h"
#include "drm_pciids.h"
#include <linux/console.h>
#include "drm_crtc_helper.h"
static int i915_modeset = -1;
module_param_named(modeset, i915_modeset, int, 0400);
unsigned int i915_fbpercrtc = 0;
module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
unsigned int i915_powersave = 1;
module_param_named(powersave, i915_powersave, int, 0400);
static struct drm_driver driver;
static struct pci_device_id pciidlist[] = {
i915_PCI_IDS
};
#if defined(CONFIG_DRM_I915_KMS)
MODULE_DEVICE_TABLE(pci, pciidlist);
#endif
static int i915_suspend(struct drm_device *dev, pm_message_t state)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (!dev || !dev_priv) {
DRM_ERROR("dev: %p, dev_priv: %p\n", dev, dev_priv);
DRM_ERROR("DRM not initialized, aborting suspend.\n");
return -ENODEV;
}
if (state.event == PM_EVENT_PRETHAW)
return 0;
pci_save_state(dev->pdev);
/* If KMS is active, we do the leavevt stuff here */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
if (i915_gem_idle(dev))
dev_err(&dev->pdev->dev,
"GEM idle failed, resume may fail\n");
drm_irq_uninstall(dev);
}
i915_save_state(dev);
intel_opregion_free(dev, 1);
if (state.event == PM_EVENT_SUSPEND) {
/* Shut down the device */
pci_disable_device(dev->pdev);
pci_set_power_state(dev->pdev, PCI_D3hot);
}
/* Modeset on resume, not lid events */
dev_priv->modeset_on_lid = 0;
return 0;
}
static int i915_resume(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret = 0;
if (pci_enable_device(dev->pdev))
return -1;
pci_set_master(dev->pdev);
i915_restore_state(dev);
intel_opregion_init(dev, 1);
/* KMS EnterVT equivalent */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
mutex_lock(&dev->struct_mutex);
dev_priv->mm.suspended = 0;
ret = i915_gem_init_ringbuffer(dev);
if (ret != 0)
ret = -1;
mutex_unlock(&dev->struct_mutex);
drm_irq_install(dev);
}
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
/* Resume the modeset for every activated CRTC */
drm_helper_resume_force_mode(dev);
}
dev_priv->modeset_on_lid = 0;
return ret;
}
/**
* i965_reset - reset chip after a hang
* @dev: drm device to reset
* @flags: reset domains
*
* Reset the chip. Useful if a hang is detected. Returns zero on successful
* reset or otherwise an error code.
*
* Procedure is fairly simple:
* - reset the chip using the reset reg
* - re-init context state
* - re-init hardware status page
* - re-init ring buffer
* - re-init interrupt state
* - re-init display
*/
int i965_reset(struct drm_device *dev, u8 flags)
{
drm_i915_private_t *dev_priv = dev->dev_private;
unsigned long timeout;
u8 gdrst;
/*
* We really should only reset the display subsystem if we actually
* need to
*/
bool need_display = true;
mutex_lock(&dev->struct_mutex);
/*
* Clear request list
*/
i915_gem_retire_requests(dev);
if (need_display)
i915_save_display(dev);
if (IS_I965G(dev) || IS_G4X(dev)) {
/*
* Set the domains we want to reset, then the reset bit (bit 0).
* Clear the reset bit after a while and wait for hardware status
* bit (bit 1) to be set
*/
pci_read_config_byte(dev->pdev, GDRST, &gdrst);
pci_write_config_byte(dev->pdev, GDRST, gdrst | flags | ((flags == GDRST_FULL) ? 0x1 : 0x0));
udelay(50);
pci_write_config_byte(dev->pdev, GDRST, gdrst & 0xfe);
/* ...we don't want to loop forever though, 500ms should be plenty */
timeout = jiffies + msecs_to_jiffies(500);
do {
udelay(100);
pci_read_config_byte(dev->pdev, GDRST, &gdrst);
} while ((gdrst & 0x1) && time_after(timeout, jiffies));
if (gdrst & 0x1) {
WARN(true, "i915: Failed to reset chip\n");
mutex_unlock(&dev->struct_mutex);
return -EIO;
}
} else {
DRM_ERROR("Error occurred. Don't know how to reset this chip.\n");
return -ENODEV;
}
/* Ok, now get things going again... */
/*
* Everything depends on having the GTT running, so we need to start
* there. Fortunately we don't need to do this unless we reset the
* chip at a PCI level.
*
* Next we need to restore the context, but we don't use those
* yet either...
*
* Ring buffer needs to be re-initialized in the KMS case, or if X
* was running at the time of the reset (i.e. we weren't VT
* switched away).
*/
if (drm_core_check_feature(dev, DRIVER_MODESET) ||
!dev_priv->mm.suspended) {
drm_i915_ring_buffer_t *ring = &dev_priv->ring;
struct drm_gem_object *obj = ring->ring_obj;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
dev_priv->mm.suspended = 0;
/* Stop the ring if it's running. */
I915_WRITE(PRB0_CTL, 0);
I915_WRITE(PRB0_TAIL, 0);
I915_WRITE(PRB0_HEAD, 0);
/* Initialize the ring. */
I915_WRITE(PRB0_START, obj_priv->gtt_offset);
I915_WRITE(PRB0_CTL,
((obj->size - 4096) & RING_NR_PAGES) |
RING_NO_REPORT |
RING_VALID);
if (!drm_core_check_feature(dev, DRIVER_MODESET))
i915_kernel_lost_context(dev);
else {
ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
ring->tail = I915_READ(PRB0_TAIL) & TAIL_ADDR;
ring->space = ring->head - (ring->tail + 8);
if (ring->space < 0)
ring->space += ring->Size;
}
mutex_unlock(&dev->struct_mutex);
drm_irq_uninstall(dev);
drm_irq_install(dev);
mutex_lock(&dev->struct_mutex);
}
/*
* Display needs restore too...
*/
if (need_display)
i915_restore_display(dev);
mutex_unlock(&dev->struct_mutex);
return 0;
}
static int __devinit
i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
return drm_get_dev(pdev, ent, &driver);
}
static void
i915_pci_remove(struct pci_dev *pdev)
{
struct drm_device *dev = pci_get_drvdata(pdev);
drm_put_dev(dev);
}
static int
i915_pci_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct drm_device *dev = pci_get_drvdata(pdev);
return i915_suspend(dev, state);
}
static int
i915_pci_resume(struct pci_dev *pdev)
{
struct drm_device *dev = pci_get_drvdata(pdev);
return i915_resume(dev);
}
static struct vm_operations_struct i915_gem_vm_ops = {
.fault = i915_gem_fault,
.open = drm_gem_vm_open,
.close = drm_gem_vm_close,
};
static struct drm_driver driver = {
/* don't use mtrr's here, the Xserver or user space app should
* deal with them for intel hardware.
*/
.driver_features =
DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | /* DRIVER_USE_MTRR |*/
DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_GEM,
.load = i915_driver_load,
.unload = i915_driver_unload,
.open = i915_driver_open,
.lastclose = i915_driver_lastclose,
.preclose = i915_driver_preclose,
.postclose = i915_driver_postclose,
.suspend = i915_suspend,
.resume = i915_resume,
.device_is_agp = i915_driver_device_is_agp,
.enable_vblank = i915_enable_vblank,
.disable_vblank = i915_disable_vblank,
.irq_preinstall = i915_driver_irq_preinstall,
.irq_postinstall = i915_driver_irq_postinstall,
.irq_uninstall = i915_driver_irq_uninstall,
.irq_handler = i915_driver_irq_handler,
.reclaim_buffers = drm_core_reclaim_buffers,
.get_map_ofs = drm_core_get_map_ofs,
.get_reg_ofs = drm_core_get_reg_ofs,
.master_create = i915_master_create,
.master_destroy = i915_master_destroy,
#if defined(CONFIG_DEBUG_FS)
.debugfs_init = i915_debugfs_init,
.debugfs_cleanup = i915_debugfs_cleanup,
#endif
.gem_init_object = i915_gem_init_object,
.gem_free_object = i915_gem_free_object,
.gem_vm_ops = &i915_gem_vm_ops,
.ioctls = i915_ioctls,
.fops = {
.owner = THIS_MODULE,
.open = drm_open,
.release = drm_release,
.ioctl = drm_ioctl,
.mmap = drm_gem_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
.read = drm_read,
#ifdef CONFIG_COMPAT
.compat_ioctl = i915_compat_ioctl,
#endif
},
.pci_driver = {
.name = DRIVER_NAME,
.id_table = pciidlist,
.probe = i915_pci_probe,
.remove = i915_pci_remove,
#ifdef CONFIG_PM
.resume = i915_pci_resume,
.suspend = i915_pci_suspend,
#endif
},
.name = DRIVER_NAME,
.desc = DRIVER_DESC,
.date = DRIVER_DATE,
.major = DRIVER_MAJOR,
.minor = DRIVER_MINOR,
.patchlevel = DRIVER_PATCHLEVEL,
};
static int __init i915_init(void)
{
driver.num_ioctls = i915_max_ioctl;
i915_gem_shrinker_init();
/*
* If CONFIG_DRM_I915_KMS is set, default to KMS unless
* explicitly disabled with the module pararmeter.
*
* Otherwise, just follow the parameter (defaulting to off).
*
* Allow optional vga_text_mode_force boot option to override
* the default behavior.
*/
#if defined(CONFIG_DRM_I915_KMS)
if (i915_modeset != 0)
driver.driver_features |= DRIVER_MODESET;
#endif
if (i915_modeset == 1)
driver.driver_features |= DRIVER_MODESET;
#ifdef CONFIG_VGA_CONSOLE
if (vgacon_text_force() && i915_modeset == -1)
driver.driver_features &= ~DRIVER_MODESET;
#endif
return drm_init(&driver);
}
static void __exit i915_exit(void)
{
i915_gem_shrinker_exit();
drm_exit(&driver);
}
module_init(i915_init);
module_exit(i915_exit);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL and additional rights");