linux_dsm_epyc7002/drivers/net/wireless/ti/wl18xx/acx.c
Kobi L e2f1e50f62 wlcore: enable sleep during AP mode operation
Enable ELP authorization in AP mode and enable the use
of the wakeup bit in the ELP register.

Introduce AP role sleep configuration which is disabled
by default. When configured, it allows the AP to sleep
when ELP is authorized for it.

Signed-off-by: Kobi Leibovitch <kobi.lev100@gmail.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-09 15:47:56 +02:00

285 lines
6.5 KiB
C

/*
* This file is part of wl18xx
*
* Copyright (C) 2011 Texas Instruments Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include "../wlcore/cmd.h"
#include "../wlcore/debug.h"
#include "../wlcore/acx.h"
#include "acx.h"
#include "wl18xx.h"
int wl18xx_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap,
u32 sdio_blk_size, u32 extra_mem_blks,
u32 len_field_size)
{
struct wl18xx_acx_host_config_bitmap *bitmap_conf;
int ret;
wl1271_debug(DEBUG_ACX, "acx cfg bitmap %d blk %d spare %d field %d",
host_cfg_bitmap, sdio_blk_size, extra_mem_blks,
len_field_size);
bitmap_conf = kzalloc(sizeof(*bitmap_conf), GFP_KERNEL);
if (!bitmap_conf) {
ret = -ENOMEM;
goto out;
}
bitmap_conf->host_cfg_bitmap = cpu_to_le32(host_cfg_bitmap);
bitmap_conf->host_sdio_block_size = cpu_to_le32(sdio_blk_size);
bitmap_conf->extra_mem_blocks = cpu_to_le32(extra_mem_blks);
bitmap_conf->length_field_size = cpu_to_le32(len_field_size);
ret = wl1271_cmd_configure(wl, ACX_HOST_IF_CFG_BITMAP,
bitmap_conf, sizeof(*bitmap_conf));
if (ret < 0) {
wl1271_warning("wl1271 bitmap config opt failed: %d", ret);
goto out;
}
out:
kfree(bitmap_conf);
return ret;
}
int wl18xx_acx_set_checksum_state(struct wl1271 *wl)
{
struct wl18xx_acx_checksum_state *acx;
int ret;
wl1271_debug(DEBUG_ACX, "acx checksum state");
acx = kzalloc(sizeof(*acx), GFP_KERNEL);
if (!acx) {
ret = -ENOMEM;
goto out;
}
acx->checksum_state = CHECKSUM_OFFLOAD_ENABLED;
ret = wl1271_cmd_configure(wl, ACX_CSUM_CONFIG, acx, sizeof(*acx));
if (ret < 0) {
wl1271_warning("failed to set Tx checksum state: %d", ret);
goto out;
}
out:
kfree(acx);
return ret;
}
int wl18xx_acx_clear_statistics(struct wl1271 *wl)
{
struct wl18xx_acx_clear_statistics *acx;
int ret = 0;
wl1271_debug(DEBUG_ACX, "acx clear statistics");
acx = kzalloc(sizeof(*acx), GFP_KERNEL);
if (!acx) {
ret = -ENOMEM;
goto out;
}
ret = wl1271_cmd_configure(wl, ACX_CLEAR_STATISTICS, acx, sizeof(*acx));
if (ret < 0) {
wl1271_warning("failed to clear firmware statistics: %d", ret);
goto out;
}
out:
kfree(acx);
return ret;
}
int wl18xx_acx_peer_ht_operation_mode(struct wl1271 *wl, u8 hlid, bool wide)
{
struct wlcore_peer_ht_operation_mode *acx;
int ret;
wl1271_debug(DEBUG_ACX, "acx peer ht operation mode hlid %d bw %d",
hlid, wide);
acx = kzalloc(sizeof(*acx), GFP_KERNEL);
if (!acx) {
ret = -ENOMEM;
goto out;
}
acx->hlid = hlid;
acx->bandwidth = wide ? WLCORE_BANDWIDTH_40MHZ : WLCORE_BANDWIDTH_20MHZ;
ret = wl1271_cmd_configure(wl, ACX_PEER_HT_OPERATION_MODE_CFG, acx,
sizeof(*acx));
if (ret < 0) {
wl1271_warning("acx peer ht operation mode failed: %d", ret);
goto out;
}
out:
kfree(acx);
return ret;
}
/*
* this command is basically the same as wl1271_acx_ht_capabilities,
* with the addition of supported rates. they should be unified in
* the next fw api change
*/
int wl18xx_acx_set_peer_cap(struct wl1271 *wl,
struct ieee80211_sta_ht_cap *ht_cap,
bool allow_ht_operation,
u32 rate_set, u8 hlid)
{
struct wlcore_acx_peer_cap *acx;
int ret = 0;
u32 ht_capabilites = 0;
wl1271_debug(DEBUG_ACX,
"acx set cap ht_supp: %d ht_cap: %d rates: 0x%x",
ht_cap->ht_supported, ht_cap->cap, rate_set);
acx = kzalloc(sizeof(*acx), GFP_KERNEL);
if (!acx) {
ret = -ENOMEM;
goto out;
}
if (allow_ht_operation && ht_cap->ht_supported) {
/* no need to translate capabilities - use the spec values */
ht_capabilites = ht_cap->cap;
/*
* this bit is not employed by the spec but only by FW to
* indicate peer HT support
*/
ht_capabilites |= WL12XX_HT_CAP_HT_OPERATION;
/* get data from A-MPDU parameters field */
acx->ampdu_max_length = ht_cap->ampdu_factor;
acx->ampdu_min_spacing = ht_cap->ampdu_density;
}
acx->hlid = hlid;
acx->ht_capabilites = cpu_to_le32(ht_capabilites);
acx->supported_rates = cpu_to_le32(rate_set);
ret = wl1271_cmd_configure(wl, ACX_PEER_CAP, acx, sizeof(*acx));
if (ret < 0) {
wl1271_warning("acx ht capabilities setting failed: %d", ret);
goto out;
}
out:
kfree(acx);
return ret;
}
/*
* When the host is suspended, we don't want to get any fast-link/PSM
* notifications
*/
int wl18xx_acx_interrupt_notify_config(struct wl1271 *wl,
bool action)
{
struct wl18xx_acx_interrupt_notify *acx;
int ret = 0;
acx = kzalloc(sizeof(*acx), GFP_KERNEL);
if (!acx) {
ret = -ENOMEM;
goto out;
}
acx->enable = action;
ret = wl1271_cmd_configure(wl, ACX_INTERRUPT_NOTIFY, acx, sizeof(*acx));
if (ret < 0) {
wl1271_warning("acx interrupt notify setting failed: %d", ret);
goto out;
}
out:
kfree(acx);
return ret;
}
/*
* When the host is suspended, we can configure the FW to disable RX BA
* notifications.
*/
int wl18xx_acx_rx_ba_filter(struct wl1271 *wl, bool action)
{
struct wl18xx_acx_rx_ba_filter *acx;
int ret = 0;
acx = kzalloc(sizeof(*acx), GFP_KERNEL);
if (!acx) {
ret = -ENOMEM;
goto out;
}
acx->enable = (u32)action;
ret = wl1271_cmd_configure(wl, ACX_RX_BA_FILTER, acx, sizeof(*acx));
if (ret < 0) {
wl1271_warning("acx rx ba activity filter setting failed: %d",
ret);
goto out;
}
out:
kfree(acx);
return ret;
}
int wl18xx_acx_ap_sleep(struct wl1271 *wl)
{
struct wl18xx_priv *priv = wl->priv;
struct acx_ap_sleep_cfg *acx;
struct conf_ap_sleep_settings *conf = &priv->conf.ap_sleep;
int ret;
wl1271_debug(DEBUG_ACX, "acx config ap sleep");
acx = kzalloc(sizeof(*acx), GFP_KERNEL);
if (!acx) {
ret = -ENOMEM;
goto out;
}
acx->idle_duty_cycle = conf->idle_duty_cycle;
acx->connected_duty_cycle = conf->connected_duty_cycle;
acx->max_stations_thresh = conf->max_stations_thresh;
acx->idle_conn_thresh = conf->idle_conn_thresh;
ret = wl1271_cmd_configure(wl, ACX_AP_SLEEP_CFG, acx, sizeof(*acx));
if (ret < 0) {
wl1271_warning("acx config ap-sleep failed: %d", ret);
goto out;
}
out:
kfree(acx);
return ret;
}