linux_dsm_epyc7002/drivers/pci/hotplug/Makefile
Gavin Shan 66725152fb PCI/hotplug: PowerPC PowerNV PCI hotplug driver
This adds standalone driver to support PCI hotplug for PowerPC PowerNV
platform that runs on top of skiboot firmware. The firmware identifies
hotpluggable slots and marked their device tree node with proper
"ibm,slot-pluggable" and "ibm,reset-by-firmware". The driver scans
device tree nodes to create/register PCI hotplug slot accordingly.

The PCI slots are organized in fashion of tree, which means one
PCI slot might have parent PCI slot and parent PCI slot possibly
contains multiple child PCI slots. At the plugging time, the parent
PCI slot is populated before its children. The child PCI slots are
removed before their parent PCI slot can be removed from the system.

If the skiboot firmware doesn't support slot status retrieval, the PCI
slot device node shouldn't have property "ibm,reset-by-firmware". In
that case, none of valid PCI slots will be detected from device tree.
The skiboot firmware doesn't export the capability to access attention
LEDs yet and it's something for TBD.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-21 15:30:58 +10:00

73 lines
1.8 KiB
Makefile

#
# Makefile for the Linux kernel pci hotplug controller drivers.
#
obj-$(CONFIG_HOTPLUG_PCI) += pci_hotplug.o
obj-$(CONFIG_HOTPLUG_PCI_COMPAQ) += cpqphp.o
obj-$(CONFIG_HOTPLUG_PCI_IBM) += ibmphp.o
# native drivers should be linked before acpiphp in order to allow the
# native driver to attempt to bind first. We can then fall back to
# generic support.
obj-$(CONFIG_HOTPLUG_PCI_PCIE) += pciehp.o
obj-$(CONFIG_HOTPLUG_PCI_CPCI_ZT5550) += cpcihp_zt5550.o
obj-$(CONFIG_HOTPLUG_PCI_CPCI_GENERIC) += cpcihp_generic.o
obj-$(CONFIG_HOTPLUG_PCI_SHPC) += shpchp.o
obj-$(CONFIG_HOTPLUG_PCI_POWERNV) += pnv-php.o
obj-$(CONFIG_HOTPLUG_PCI_RPA) += rpaphp.o
obj-$(CONFIG_HOTPLUG_PCI_RPA_DLPAR) += rpadlpar_io.o
obj-$(CONFIG_HOTPLUG_PCI_SGI) += sgi_hotplug.o
obj-$(CONFIG_HOTPLUG_PCI_ACPI) += acpiphp.o
obj-$(CONFIG_HOTPLUG_PCI_S390) += s390_pci_hpc.o
# acpiphp_ibm extends acpiphp, so should be linked afterwards.
obj-$(CONFIG_HOTPLUG_PCI_ACPI_IBM) += acpiphp_ibm.o
pci_hotplug-objs := pci_hotplug_core.o
ifdef CONFIG_HOTPLUG_PCI_CPCI
pci_hotplug-objs += cpci_hotplug_core.o \
cpci_hotplug_pci.o
endif
ifdef CONFIG_ACPI
pci_hotplug-objs += acpi_pcihp.o
endif
cpqphp-objs := cpqphp_core.o \
cpqphp_ctrl.o \
cpqphp_sysfs.o \
cpqphp_pci.o
cpqphp-$(CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM) += cpqphp_nvram.o
cpqphp-objs += $(cpqphp-y)
ibmphp-objs := ibmphp_core.o \
ibmphp_ebda.o \
ibmphp_pci.o \
ibmphp_res.o \
ibmphp_hpc.o
acpiphp-objs := acpiphp_core.o \
acpiphp_glue.o
pnv-php-objs := pnv_php.o
rpaphp-objs := rpaphp_core.o \
rpaphp_pci.o \
rpaphp_slot.o
rpadlpar_io-objs := rpadlpar_core.o \
rpadlpar_sysfs.o
pciehp-objs := pciehp_core.o \
pciehp_ctrl.o \
pciehp_pci.o \
pciehp_hpc.o
shpchp-objs := shpchp_core.o \
shpchp_ctrl.o \
shpchp_pci.o \
shpchp_sysfs.o \
shpchp_hpc.o