mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 12:49:08 +07:00
2a1ed07718
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2105 lines
57 KiB
C
2105 lines
57 KiB
C
/*
|
|
* w83781d.c - Part of lm_sensors, Linux kernel modules for hardware
|
|
* monitoring
|
|
* Copyright (c) 1998 - 2001 Frodo Looijaard <frodol@dds.nl>,
|
|
* Philip Edelbrock <phil@netroedge.com>,
|
|
* and Mark Studebaker <mdsxyz123@yahoo.com>
|
|
* Copyright (c) 2007 - 2008 Jean Delvare <jdelvare@suse.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
/*
|
|
* Supports following chips:
|
|
*
|
|
* Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
|
|
* as99127f 7 3 0 3 0x31 0x12c3 yes no
|
|
* as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no
|
|
* w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes
|
|
* w83782d 9 3 2-4 3 0x30 0x5ca3 yes yes
|
|
* w83783s 5-6 3 2 1-2 0x40 0x5ca3 yes no
|
|
*
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-vid.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
|
|
#ifdef CONFIG_ISA
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/io.h>
|
|
#endif
|
|
|
|
#include "lm75.h"
|
|
|
|
/* Addresses to scan */
|
|
static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
|
|
0x2e, 0x2f, I2C_CLIENT_END };
|
|
|
|
enum chips { w83781d, w83782d, w83783s, as99127f };
|
|
|
|
/* Insmod parameters */
|
|
static unsigned short force_subclients[4];
|
|
module_param_array(force_subclients, short, NULL, 0);
|
|
MODULE_PARM_DESC(force_subclients,
|
|
"List of subclient addresses: {bus, clientaddr, subclientaddr1, subclientaddr2}");
|
|
|
|
static bool reset;
|
|
module_param(reset, bool, 0);
|
|
MODULE_PARM_DESC(reset, "Set to one to reset chip on load");
|
|
|
|
static bool init = 1;
|
|
module_param(init, bool, 0);
|
|
MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
|
|
|
|
/* Constants specified below */
|
|
|
|
/* Length of ISA address segment */
|
|
#define W83781D_EXTENT 8
|
|
|
|
/* Where are the ISA address/data registers relative to the base address */
|
|
#define W83781D_ADDR_REG_OFFSET 5
|
|
#define W83781D_DATA_REG_OFFSET 6
|
|
|
|
/* The device registers */
|
|
/* in nr from 0 to 8 */
|
|
#define W83781D_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \
|
|
(0x554 + (((nr) - 7) * 2)))
|
|
#define W83781D_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \
|
|
(0x555 + (((nr) - 7) * 2)))
|
|
#define W83781D_REG_IN(nr) ((nr < 7) ? (0x20 + (nr)) : \
|
|
(0x550 + (nr) - 7))
|
|
|
|
/* fan nr from 0 to 2 */
|
|
#define W83781D_REG_FAN_MIN(nr) (0x3b + (nr))
|
|
#define W83781D_REG_FAN(nr) (0x28 + (nr))
|
|
|
|
#define W83781D_REG_BANK 0x4E
|
|
#define W83781D_REG_TEMP2_CONFIG 0x152
|
|
#define W83781D_REG_TEMP3_CONFIG 0x252
|
|
/* temp nr from 1 to 3 */
|
|
#define W83781D_REG_TEMP(nr) ((nr == 3) ? (0x0250) : \
|
|
((nr == 2) ? (0x0150) : \
|
|
(0x27)))
|
|
#define W83781D_REG_TEMP_HYST(nr) ((nr == 3) ? (0x253) : \
|
|
((nr == 2) ? (0x153) : \
|
|
(0x3A)))
|
|
#define W83781D_REG_TEMP_OVER(nr) ((nr == 3) ? (0x255) : \
|
|
((nr == 2) ? (0x155) : \
|
|
(0x39)))
|
|
|
|
#define W83781D_REG_CONFIG 0x40
|
|
|
|
/* Interrupt status (W83781D, AS99127F) */
|
|
#define W83781D_REG_ALARM1 0x41
|
|
#define W83781D_REG_ALARM2 0x42
|
|
|
|
/* Real-time status (W83782D, W83783S) */
|
|
#define W83782D_REG_ALARM1 0x459
|
|
#define W83782D_REG_ALARM2 0x45A
|
|
#define W83782D_REG_ALARM3 0x45B
|
|
|
|
#define W83781D_REG_BEEP_CONFIG 0x4D
|
|
#define W83781D_REG_BEEP_INTS1 0x56
|
|
#define W83781D_REG_BEEP_INTS2 0x57
|
|
#define W83781D_REG_BEEP_INTS3 0x453 /* not on W83781D */
|
|
|
|
#define W83781D_REG_VID_FANDIV 0x47
|
|
|
|
#define W83781D_REG_CHIPID 0x49
|
|
#define W83781D_REG_WCHIPID 0x58
|
|
#define W83781D_REG_CHIPMAN 0x4F
|
|
#define W83781D_REG_PIN 0x4B
|
|
|
|
/* 782D/783S only */
|
|
#define W83781D_REG_VBAT 0x5D
|
|
|
|
/* PWM 782D (1-4) and 783S (1-2) only */
|
|
static const u8 W83781D_REG_PWM[] = { 0x5B, 0x5A, 0x5E, 0x5F };
|
|
#define W83781D_REG_PWMCLK12 0x5C
|
|
#define W83781D_REG_PWMCLK34 0x45C
|
|
|
|
#define W83781D_REG_I2C_ADDR 0x48
|
|
#define W83781D_REG_I2C_SUBADDR 0x4A
|
|
|
|
/*
|
|
* The following are undocumented in the data sheets however we
|
|
* received the information in an email from Winbond tech support
|
|
*/
|
|
/* Sensor selection - not on 781d */
|
|
#define W83781D_REG_SCFG1 0x5D
|
|
static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 };
|
|
|
|
#define W83781D_REG_SCFG2 0x59
|
|
static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 };
|
|
|
|
#define W83781D_DEFAULT_BETA 3435
|
|
|
|
/* Conversions */
|
|
#define IN_TO_REG(val) clamp_val(((val) + 8) / 16, 0, 255)
|
|
#define IN_FROM_REG(val) ((val) * 16)
|
|
|
|
static inline u8
|
|
FAN_TO_REG(long rpm, int div)
|
|
{
|
|
if (rpm == 0)
|
|
return 255;
|
|
rpm = clamp_val(rpm, 1, 1000000);
|
|
return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
|
|
}
|
|
|
|
static inline long
|
|
FAN_FROM_REG(u8 val, int div)
|
|
{
|
|
if (val == 0)
|
|
return -1;
|
|
if (val == 255)
|
|
return 0;
|
|
return 1350000 / (val * div);
|
|
}
|
|
|
|
#define TEMP_TO_REG(val) clamp_val((val) / 1000, -127, 128)
|
|
#define TEMP_FROM_REG(val) ((val) * 1000)
|
|
|
|
#define BEEP_MASK_FROM_REG(val, type) ((type) == as99127f ? \
|
|
(~(val)) & 0x7fff : (val) & 0xff7fff)
|
|
#define BEEP_MASK_TO_REG(val, type) ((type) == as99127f ? \
|
|
(~(val)) & 0x7fff : (val) & 0xff7fff)
|
|
|
|
#define DIV_FROM_REG(val) (1 << (val))
|
|
|
|
static inline u8
|
|
DIV_TO_REG(long val, enum chips type)
|
|
{
|
|
int i;
|
|
val = clamp_val(val, 1,
|
|
((type == w83781d || type == as99127f) ? 8 : 128)) >> 1;
|
|
for (i = 0; i < 7; i++) {
|
|
if (val == 0)
|
|
break;
|
|
val >>= 1;
|
|
}
|
|
return i;
|
|
}
|
|
|
|
struct w83781d_data {
|
|
struct i2c_client *client;
|
|
struct device *hwmon_dev;
|
|
struct mutex lock;
|
|
enum chips type;
|
|
|
|
/* For ISA device only */
|
|
const char *name;
|
|
int isa_addr;
|
|
|
|
struct mutex update_lock;
|
|
char valid; /* !=0 if following fields are valid */
|
|
unsigned long last_updated; /* In jiffies */
|
|
|
|
struct i2c_client *lm75[2]; /* for secondary I2C addresses */
|
|
/* array of 2 pointers to subclients */
|
|
|
|
u8 in[9]; /* Register value - 8 & 9 for 782D only */
|
|
u8 in_max[9]; /* Register value - 8 & 9 for 782D only */
|
|
u8 in_min[9]; /* Register value - 8 & 9 for 782D only */
|
|
u8 fan[3]; /* Register value */
|
|
u8 fan_min[3]; /* Register value */
|
|
s8 temp; /* Register value */
|
|
s8 temp_max; /* Register value */
|
|
s8 temp_max_hyst; /* Register value */
|
|
u16 temp_add[2]; /* Register value */
|
|
u16 temp_max_add[2]; /* Register value */
|
|
u16 temp_max_hyst_add[2]; /* Register value */
|
|
u8 fan_div[3]; /* Register encoding, shifted right */
|
|
u8 vid; /* Register encoding, combined */
|
|
u32 alarms; /* Register encoding, combined */
|
|
u32 beep_mask; /* Register encoding, combined */
|
|
u8 pwm[4]; /* Register value */
|
|
u8 pwm2_enable; /* Boolean */
|
|
u16 sens[3]; /*
|
|
* 782D/783S only.
|
|
* 1 = pentium diode; 2 = 3904 diode;
|
|
* 4 = thermistor
|
|
*/
|
|
u8 vrm;
|
|
};
|
|
|
|
static struct w83781d_data *w83781d_data_if_isa(void);
|
|
static int w83781d_alias_detect(struct i2c_client *client, u8 chipid);
|
|
|
|
static int w83781d_read_value(struct w83781d_data *data, u16 reg);
|
|
static int w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value);
|
|
static struct w83781d_data *w83781d_update_device(struct device *dev);
|
|
static void w83781d_init_device(struct device *dev);
|
|
|
|
/* following are the sysfs callback functions */
|
|
#define show_in_reg(reg) \
|
|
static ssize_t show_##reg(struct device *dev, struct device_attribute *da, \
|
|
char *buf) \
|
|
{ \
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
|
|
struct w83781d_data *data = w83781d_update_device(dev); \
|
|
return sprintf(buf, "%ld\n", \
|
|
(long)IN_FROM_REG(data->reg[attr->index])); \
|
|
}
|
|
show_in_reg(in);
|
|
show_in_reg(in_min);
|
|
show_in_reg(in_max);
|
|
|
|
#define store_in_reg(REG, reg) \
|
|
static ssize_t store_in_##reg(struct device *dev, struct device_attribute \
|
|
*da, const char *buf, size_t count) \
|
|
{ \
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
|
|
struct w83781d_data *data = dev_get_drvdata(dev); \
|
|
int nr = attr->index; \
|
|
unsigned long val; \
|
|
int err = kstrtoul(buf, 10, &val); \
|
|
if (err) \
|
|
return err; \
|
|
mutex_lock(&data->update_lock); \
|
|
data->in_##reg[nr] = IN_TO_REG(val); \
|
|
w83781d_write_value(data, W83781D_REG_IN_##REG(nr), \
|
|
data->in_##reg[nr]); \
|
|
\
|
|
mutex_unlock(&data->update_lock); \
|
|
return count; \
|
|
}
|
|
store_in_reg(MIN, min);
|
|
store_in_reg(MAX, max);
|
|
|
|
#define sysfs_in_offsets(offset) \
|
|
static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
|
|
show_in, NULL, offset); \
|
|
static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
|
|
show_in_min, store_in_min, offset); \
|
|
static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
|
|
show_in_max, store_in_max, offset)
|
|
|
|
sysfs_in_offsets(0);
|
|
sysfs_in_offsets(1);
|
|
sysfs_in_offsets(2);
|
|
sysfs_in_offsets(3);
|
|
sysfs_in_offsets(4);
|
|
sysfs_in_offsets(5);
|
|
sysfs_in_offsets(6);
|
|
sysfs_in_offsets(7);
|
|
sysfs_in_offsets(8);
|
|
|
|
#define show_fan_reg(reg) \
|
|
static ssize_t show_##reg(struct device *dev, struct device_attribute *da, \
|
|
char *buf) \
|
|
{ \
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
|
|
struct w83781d_data *data = w83781d_update_device(dev); \
|
|
return sprintf(buf, "%ld\n", \
|
|
FAN_FROM_REG(data->reg[attr->index], \
|
|
DIV_FROM_REG(data->fan_div[attr->index]))); \
|
|
}
|
|
show_fan_reg(fan);
|
|
show_fan_reg(fan_min);
|
|
|
|
static ssize_t
|
|
store_fan_min(struct device *dev, struct device_attribute *da,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct w83781d_data *data = dev_get_drvdata(dev);
|
|
int nr = attr->index;
|
|
unsigned long val;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->fan_min[nr] =
|
|
FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
|
|
w83781d_write_value(data, W83781D_REG_FAN_MIN(nr),
|
|
data->fan_min[nr]);
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
|
|
static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR,
|
|
show_fan_min, store_fan_min, 0);
|
|
static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
|
|
static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO | S_IWUSR,
|
|
show_fan_min, store_fan_min, 1);
|
|
static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
|
|
static SENSOR_DEVICE_ATTR(fan3_min, S_IRUGO | S_IWUSR,
|
|
show_fan_min, store_fan_min, 2);
|
|
|
|
#define show_temp_reg(reg) \
|
|
static ssize_t show_##reg(struct device *dev, struct device_attribute *da, \
|
|
char *buf) \
|
|
{ \
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
|
|
struct w83781d_data *data = w83781d_update_device(dev); \
|
|
int nr = attr->index; \
|
|
if (nr >= 2) { /* TEMP2 and TEMP3 */ \
|
|
return sprintf(buf, "%d\n", \
|
|
LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \
|
|
} else { /* TEMP1 */ \
|
|
return sprintf(buf, "%ld\n", (long)TEMP_FROM_REG(data->reg)); \
|
|
} \
|
|
}
|
|
show_temp_reg(temp);
|
|
show_temp_reg(temp_max);
|
|
show_temp_reg(temp_max_hyst);
|
|
|
|
#define store_temp_reg(REG, reg) \
|
|
static ssize_t store_temp_##reg(struct device *dev, \
|
|
struct device_attribute *da, const char *buf, size_t count) \
|
|
{ \
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
|
|
struct w83781d_data *data = dev_get_drvdata(dev); \
|
|
int nr = attr->index; \
|
|
long val; \
|
|
int err = kstrtol(buf, 10, &val); \
|
|
if (err) \
|
|
return err; \
|
|
mutex_lock(&data->update_lock); \
|
|
\
|
|
if (nr >= 2) { /* TEMP2 and TEMP3 */ \
|
|
data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \
|
|
w83781d_write_value(data, W83781D_REG_TEMP_##REG(nr), \
|
|
data->temp_##reg##_add[nr-2]); \
|
|
} else { /* TEMP1 */ \
|
|
data->temp_##reg = TEMP_TO_REG(val); \
|
|
w83781d_write_value(data, W83781D_REG_TEMP_##REG(nr), \
|
|
data->temp_##reg); \
|
|
} \
|
|
\
|
|
mutex_unlock(&data->update_lock); \
|
|
return count; \
|
|
}
|
|
store_temp_reg(OVER, max);
|
|
store_temp_reg(HYST, max_hyst);
|
|
|
|
#define sysfs_temp_offsets(offset) \
|
|
static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
|
|
show_temp, NULL, offset); \
|
|
static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
|
|
show_temp_max, store_temp_max, offset); \
|
|
static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \
|
|
show_temp_max_hyst, store_temp_max_hyst, offset);
|
|
|
|
sysfs_temp_offsets(1);
|
|
sysfs_temp_offsets(2);
|
|
sysfs_temp_offsets(3);
|
|
|
|
static ssize_t
|
|
show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct w83781d_data *data = w83781d_update_device(dev);
|
|
return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
|
|
}
|
|
|
|
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
|
|
|
|
static ssize_t
|
|
show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct w83781d_data *data = dev_get_drvdata(dev);
|
|
return sprintf(buf, "%ld\n", (long) data->vrm);
|
|
}
|
|
|
|
static ssize_t
|
|
store_vrm_reg(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct w83781d_data *data = dev_get_drvdata(dev);
|
|
unsigned long val;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
data->vrm = clamp_val(val, 0, 255);
|
|
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
|
|
|
|
static ssize_t
|
|
show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct w83781d_data *data = w83781d_update_device(dev);
|
|
return sprintf(buf, "%u\n", data->alarms);
|
|
}
|
|
|
|
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
|
|
|
|
static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct w83781d_data *data = w83781d_update_device(dev);
|
|
int bitnr = to_sensor_dev_attr(attr)->index;
|
|
return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
|
|
}
|
|
|
|
/* The W83781D has a single alarm bit for temp2 and temp3 */
|
|
static ssize_t show_temp3_alarm(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct w83781d_data *data = w83781d_update_device(dev);
|
|
int bitnr = (data->type == w83781d) ? 5 : 13;
|
|
return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
|
|
}
|
|
|
|
static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
|
|
static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
|
|
static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
|
|
static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
|
|
static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8);
|
|
static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9);
|
|
static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 10);
|
|
static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 16);
|
|
static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 17);
|
|
static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6);
|
|
static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7);
|
|
static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11);
|
|
static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
|
|
static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5);
|
|
static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_temp3_alarm, NULL, 0);
|
|
|
|
static ssize_t show_beep_mask(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct w83781d_data *data = w83781d_update_device(dev);
|
|
return sprintf(buf, "%ld\n",
|
|
(long)BEEP_MASK_FROM_REG(data->beep_mask, data->type));
|
|
}
|
|
|
|
static ssize_t
|
|
store_beep_mask(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct w83781d_data *data = dev_get_drvdata(dev);
|
|
unsigned long val;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->beep_mask &= 0x8000; /* preserve beep enable */
|
|
data->beep_mask |= BEEP_MASK_TO_REG(val, data->type);
|
|
w83781d_write_value(data, W83781D_REG_BEEP_INTS1,
|
|
data->beep_mask & 0xff);
|
|
w83781d_write_value(data, W83781D_REG_BEEP_INTS2,
|
|
(data->beep_mask >> 8) & 0xff);
|
|
if (data->type != w83781d && data->type != as99127f) {
|
|
w83781d_write_value(data, W83781D_REG_BEEP_INTS3,
|
|
((data->beep_mask) >> 16) & 0xff);
|
|
}
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR(beep_mask, S_IRUGO | S_IWUSR,
|
|
show_beep_mask, store_beep_mask);
|
|
|
|
static ssize_t show_beep(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct w83781d_data *data = w83781d_update_device(dev);
|
|
int bitnr = to_sensor_dev_attr(attr)->index;
|
|
return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1);
|
|
}
|
|
|
|
static ssize_t
|
|
store_beep(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct w83781d_data *data = dev_get_drvdata(dev);
|
|
int bitnr = to_sensor_dev_attr(attr)->index;
|
|
u8 reg;
|
|
unsigned long bit;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &bit);
|
|
if (err)
|
|
return err;
|
|
|
|
if (bit & ~1)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
if (bit)
|
|
data->beep_mask |= (1 << bitnr);
|
|
else
|
|
data->beep_mask &= ~(1 << bitnr);
|
|
|
|
if (bitnr < 8) {
|
|
reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS1);
|
|
if (bit)
|
|
reg |= (1 << bitnr);
|
|
else
|
|
reg &= ~(1 << bitnr);
|
|
w83781d_write_value(data, W83781D_REG_BEEP_INTS1, reg);
|
|
} else if (bitnr < 16) {
|
|
reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS2);
|
|
if (bit)
|
|
reg |= (1 << (bitnr - 8));
|
|
else
|
|
reg &= ~(1 << (bitnr - 8));
|
|
w83781d_write_value(data, W83781D_REG_BEEP_INTS2, reg);
|
|
} else {
|
|
reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS3);
|
|
if (bit)
|
|
reg |= (1 << (bitnr - 16));
|
|
else
|
|
reg &= ~(1 << (bitnr - 16));
|
|
w83781d_write_value(data, W83781D_REG_BEEP_INTS3, reg);
|
|
}
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
/* The W83781D has a single beep bit for temp2 and temp3 */
|
|
static ssize_t show_temp3_beep(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct w83781d_data *data = w83781d_update_device(dev);
|
|
int bitnr = (data->type == w83781d) ? 5 : 13;
|
|
return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1);
|
|
}
|
|
|
|
static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR,
|
|
show_beep, store_beep, 0);
|
|
static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO | S_IWUSR,
|
|
show_beep, store_beep, 1);
|
|
static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO | S_IWUSR,
|
|
show_beep, store_beep, 2);
|
|
static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO | S_IWUSR,
|
|
show_beep, store_beep, 3);
|
|
static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO | S_IWUSR,
|
|
show_beep, store_beep, 8);
|
|
static SENSOR_DEVICE_ATTR(in5_beep, S_IRUGO | S_IWUSR,
|
|
show_beep, store_beep, 9);
|
|
static SENSOR_DEVICE_ATTR(in6_beep, S_IRUGO | S_IWUSR,
|
|
show_beep, store_beep, 10);
|
|
static SENSOR_DEVICE_ATTR(in7_beep, S_IRUGO | S_IWUSR,
|
|
show_beep, store_beep, 16);
|
|
static SENSOR_DEVICE_ATTR(in8_beep, S_IRUGO | S_IWUSR,
|
|
show_beep, store_beep, 17);
|
|
static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO | S_IWUSR,
|
|
show_beep, store_beep, 6);
|
|
static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO | S_IWUSR,
|
|
show_beep, store_beep, 7);
|
|
static SENSOR_DEVICE_ATTR(fan3_beep, S_IRUGO | S_IWUSR,
|
|
show_beep, store_beep, 11);
|
|
static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR,
|
|
show_beep, store_beep, 4);
|
|
static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO | S_IWUSR,
|
|
show_beep, store_beep, 5);
|
|
static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO,
|
|
show_temp3_beep, store_beep, 13);
|
|
static SENSOR_DEVICE_ATTR(beep_enable, S_IRUGO | S_IWUSR,
|
|
show_beep, store_beep, 15);
|
|
|
|
static ssize_t
|
|
show_fan_div(struct device *dev, struct device_attribute *da, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct w83781d_data *data = w83781d_update_device(dev);
|
|
return sprintf(buf, "%ld\n",
|
|
(long) DIV_FROM_REG(data->fan_div[attr->index]));
|
|
}
|
|
|
|
/*
|
|
* Note: we save and restore the fan minimum here, because its value is
|
|
* determined in part by the fan divisor. This follows the principle of
|
|
* least surprise; the user doesn't expect the fan minimum to change just
|
|
* because the divisor changed.
|
|
*/
|
|
static ssize_t
|
|
store_fan_div(struct device *dev, struct device_attribute *da,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct w83781d_data *data = dev_get_drvdata(dev);
|
|
unsigned long min;
|
|
int nr = attr->index;
|
|
u8 reg;
|
|
unsigned long val;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
/* Save fan_min */
|
|
min = FAN_FROM_REG(data->fan_min[nr],
|
|
DIV_FROM_REG(data->fan_div[nr]));
|
|
|
|
data->fan_div[nr] = DIV_TO_REG(val, data->type);
|
|
|
|
reg = (w83781d_read_value(data, nr == 2 ?
|
|
W83781D_REG_PIN : W83781D_REG_VID_FANDIV)
|
|
& (nr == 0 ? 0xcf : 0x3f))
|
|
| ((data->fan_div[nr] & 0x03) << (nr == 0 ? 4 : 6));
|
|
w83781d_write_value(data, nr == 2 ?
|
|
W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg);
|
|
|
|
/* w83781d and as99127f don't have extended divisor bits */
|
|
if (data->type != w83781d && data->type != as99127f) {
|
|
reg = (w83781d_read_value(data, W83781D_REG_VBAT)
|
|
& ~(1 << (5 + nr)))
|
|
| ((data->fan_div[nr] & 0x04) << (3 + nr));
|
|
w83781d_write_value(data, W83781D_REG_VBAT, reg);
|
|
}
|
|
|
|
/* Restore fan_min */
|
|
data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
|
|
w83781d_write_value(data, W83781D_REG_FAN_MIN(nr), data->fan_min[nr]);
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
|
|
show_fan_div, store_fan_div, 0);
|
|
static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR,
|
|
show_fan_div, store_fan_div, 1);
|
|
static SENSOR_DEVICE_ATTR(fan3_div, S_IRUGO | S_IWUSR,
|
|
show_fan_div, store_fan_div, 2);
|
|
|
|
static ssize_t
|
|
show_pwm(struct device *dev, struct device_attribute *da, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct w83781d_data *data = w83781d_update_device(dev);
|
|
return sprintf(buf, "%d\n", (int)data->pwm[attr->index]);
|
|
}
|
|
|
|
static ssize_t
|
|
show_pwm2_enable(struct device *dev, struct device_attribute *da, char *buf)
|
|
{
|
|
struct w83781d_data *data = w83781d_update_device(dev);
|
|
return sprintf(buf, "%d\n", (int)data->pwm2_enable);
|
|
}
|
|
|
|
static ssize_t
|
|
store_pwm(struct device *dev, struct device_attribute *da, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct w83781d_data *data = dev_get_drvdata(dev);
|
|
int nr = attr->index;
|
|
unsigned long val;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->pwm[nr] = clamp_val(val, 0, 255);
|
|
w83781d_write_value(data, W83781D_REG_PWM[nr], data->pwm[nr]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t
|
|
store_pwm2_enable(struct device *dev, struct device_attribute *da,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct w83781d_data *data = dev_get_drvdata(dev);
|
|
unsigned long val;
|
|
u32 reg;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
switch (val) {
|
|
case 0:
|
|
case 1:
|
|
reg = w83781d_read_value(data, W83781D_REG_PWMCLK12);
|
|
w83781d_write_value(data, W83781D_REG_PWMCLK12,
|
|
(reg & 0xf7) | (val << 3));
|
|
|
|
reg = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
|
|
w83781d_write_value(data, W83781D_REG_BEEP_CONFIG,
|
|
(reg & 0xef) | (!val << 4));
|
|
|
|
data->pwm2_enable = val;
|
|
break;
|
|
|
|
default:
|
|
mutex_unlock(&data->update_lock);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 0);
|
|
static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 1);
|
|
static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 2);
|
|
static SENSOR_DEVICE_ATTR(pwm4, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 3);
|
|
/* only PWM2 can be enabled/disabled */
|
|
static DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR,
|
|
show_pwm2_enable, store_pwm2_enable);
|
|
|
|
static ssize_t
|
|
show_sensor(struct device *dev, struct device_attribute *da, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct w83781d_data *data = w83781d_update_device(dev);
|
|
return sprintf(buf, "%d\n", (int)data->sens[attr->index]);
|
|
}
|
|
|
|
static ssize_t
|
|
store_sensor(struct device *dev, struct device_attribute *da,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct w83781d_data *data = dev_get_drvdata(dev);
|
|
int nr = attr->index;
|
|
unsigned long val;
|
|
u32 tmp;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
switch (val) {
|
|
case 1: /* PII/Celeron diode */
|
|
tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
|
|
w83781d_write_value(data, W83781D_REG_SCFG1,
|
|
tmp | BIT_SCFG1[nr]);
|
|
tmp = w83781d_read_value(data, W83781D_REG_SCFG2);
|
|
w83781d_write_value(data, W83781D_REG_SCFG2,
|
|
tmp | BIT_SCFG2[nr]);
|
|
data->sens[nr] = val;
|
|
break;
|
|
case 2: /* 3904 */
|
|
tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
|
|
w83781d_write_value(data, W83781D_REG_SCFG1,
|
|
tmp | BIT_SCFG1[nr]);
|
|
tmp = w83781d_read_value(data, W83781D_REG_SCFG2);
|
|
w83781d_write_value(data, W83781D_REG_SCFG2,
|
|
tmp & ~BIT_SCFG2[nr]);
|
|
data->sens[nr] = val;
|
|
break;
|
|
case W83781D_DEFAULT_BETA:
|
|
dev_warn(dev,
|
|
"Sensor type %d is deprecated, please use 4 instead\n",
|
|
W83781D_DEFAULT_BETA);
|
|
/* fall through */
|
|
case 4: /* thermistor */
|
|
tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
|
|
w83781d_write_value(data, W83781D_REG_SCFG1,
|
|
tmp & ~BIT_SCFG1[nr]);
|
|
data->sens[nr] = val;
|
|
break;
|
|
default:
|
|
dev_err(dev, "Invalid sensor type %ld; must be 1, 2, or 4\n",
|
|
(long) val);
|
|
break;
|
|
}
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO | S_IWUSR,
|
|
show_sensor, store_sensor, 0);
|
|
static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO | S_IWUSR,
|
|
show_sensor, store_sensor, 1);
|
|
static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO | S_IWUSR,
|
|
show_sensor, store_sensor, 2);
|
|
|
|
/*
|
|
* Assumes that adapter is of I2C, not ISA variety.
|
|
* OTHERWISE DON'T CALL THIS
|
|
*/
|
|
static int
|
|
w83781d_detect_subclients(struct i2c_client *new_client)
|
|
{
|
|
int i, val1 = 0, id;
|
|
int err;
|
|
int address = new_client->addr;
|
|
unsigned short sc_addr[2];
|
|
struct i2c_adapter *adapter = new_client->adapter;
|
|
struct w83781d_data *data = i2c_get_clientdata(new_client);
|
|
enum chips kind = data->type;
|
|
int num_sc = 1;
|
|
|
|
id = i2c_adapter_id(adapter);
|
|
|
|
if (force_subclients[0] == id && force_subclients[1] == address) {
|
|
for (i = 2; i <= 3; i++) {
|
|
if (force_subclients[i] < 0x48 ||
|
|
force_subclients[i] > 0x4f) {
|
|
dev_err(&new_client->dev,
|
|
"Invalid subclient address %d; must be 0x48-0x4f\n",
|
|
force_subclients[i]);
|
|
err = -EINVAL;
|
|
goto ERROR_SC_1;
|
|
}
|
|
}
|
|
w83781d_write_value(data, W83781D_REG_I2C_SUBADDR,
|
|
(force_subclients[2] & 0x07) |
|
|
((force_subclients[3] & 0x07) << 4));
|
|
sc_addr[0] = force_subclients[2];
|
|
} else {
|
|
val1 = w83781d_read_value(data, W83781D_REG_I2C_SUBADDR);
|
|
sc_addr[0] = 0x48 + (val1 & 0x07);
|
|
}
|
|
|
|
if (kind != w83783s) {
|
|
num_sc = 2;
|
|
if (force_subclients[0] == id &&
|
|
force_subclients[1] == address) {
|
|
sc_addr[1] = force_subclients[3];
|
|
} else {
|
|
sc_addr[1] = 0x48 + ((val1 >> 4) & 0x07);
|
|
}
|
|
if (sc_addr[0] == sc_addr[1]) {
|
|
dev_err(&new_client->dev,
|
|
"Duplicate addresses 0x%x for subclients.\n",
|
|
sc_addr[0]);
|
|
err = -EBUSY;
|
|
goto ERROR_SC_2;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < num_sc; i++) {
|
|
data->lm75[i] = i2c_new_dummy(adapter, sc_addr[i]);
|
|
if (!data->lm75[i]) {
|
|
dev_err(&new_client->dev,
|
|
"Subclient %d registration at address 0x%x failed.\n",
|
|
i, sc_addr[i]);
|
|
err = -ENOMEM;
|
|
if (i == 1)
|
|
goto ERROR_SC_3;
|
|
goto ERROR_SC_2;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
/* Undo inits in case of errors */
|
|
ERROR_SC_3:
|
|
i2c_unregister_device(data->lm75[0]);
|
|
ERROR_SC_2:
|
|
ERROR_SC_1:
|
|
return err;
|
|
}
|
|
|
|
#define IN_UNIT_ATTRS(X) \
|
|
&sensor_dev_attr_in##X##_input.dev_attr.attr, \
|
|
&sensor_dev_attr_in##X##_min.dev_attr.attr, \
|
|
&sensor_dev_attr_in##X##_max.dev_attr.attr, \
|
|
&sensor_dev_attr_in##X##_alarm.dev_attr.attr, \
|
|
&sensor_dev_attr_in##X##_beep.dev_attr.attr
|
|
|
|
#define FAN_UNIT_ATTRS(X) \
|
|
&sensor_dev_attr_fan##X##_input.dev_attr.attr, \
|
|
&sensor_dev_attr_fan##X##_min.dev_attr.attr, \
|
|
&sensor_dev_attr_fan##X##_div.dev_attr.attr, \
|
|
&sensor_dev_attr_fan##X##_alarm.dev_attr.attr, \
|
|
&sensor_dev_attr_fan##X##_beep.dev_attr.attr
|
|
|
|
#define TEMP_UNIT_ATTRS(X) \
|
|
&sensor_dev_attr_temp##X##_input.dev_attr.attr, \
|
|
&sensor_dev_attr_temp##X##_max.dev_attr.attr, \
|
|
&sensor_dev_attr_temp##X##_max_hyst.dev_attr.attr, \
|
|
&sensor_dev_attr_temp##X##_alarm.dev_attr.attr, \
|
|
&sensor_dev_attr_temp##X##_beep.dev_attr.attr
|
|
|
|
static struct attribute *w83781d_attributes[] = {
|
|
IN_UNIT_ATTRS(0),
|
|
IN_UNIT_ATTRS(2),
|
|
IN_UNIT_ATTRS(3),
|
|
IN_UNIT_ATTRS(4),
|
|
IN_UNIT_ATTRS(5),
|
|
IN_UNIT_ATTRS(6),
|
|
FAN_UNIT_ATTRS(1),
|
|
FAN_UNIT_ATTRS(2),
|
|
FAN_UNIT_ATTRS(3),
|
|
TEMP_UNIT_ATTRS(1),
|
|
TEMP_UNIT_ATTRS(2),
|
|
&dev_attr_cpu0_vid.attr,
|
|
&dev_attr_vrm.attr,
|
|
&dev_attr_alarms.attr,
|
|
&dev_attr_beep_mask.attr,
|
|
&sensor_dev_attr_beep_enable.dev_attr.attr,
|
|
NULL
|
|
};
|
|
static const struct attribute_group w83781d_group = {
|
|
.attrs = w83781d_attributes,
|
|
};
|
|
|
|
static struct attribute *w83781d_attributes_in1[] = {
|
|
IN_UNIT_ATTRS(1),
|
|
NULL
|
|
};
|
|
static const struct attribute_group w83781d_group_in1 = {
|
|
.attrs = w83781d_attributes_in1,
|
|
};
|
|
|
|
static struct attribute *w83781d_attributes_in78[] = {
|
|
IN_UNIT_ATTRS(7),
|
|
IN_UNIT_ATTRS(8),
|
|
NULL
|
|
};
|
|
static const struct attribute_group w83781d_group_in78 = {
|
|
.attrs = w83781d_attributes_in78,
|
|
};
|
|
|
|
static struct attribute *w83781d_attributes_temp3[] = {
|
|
TEMP_UNIT_ATTRS(3),
|
|
NULL
|
|
};
|
|
static const struct attribute_group w83781d_group_temp3 = {
|
|
.attrs = w83781d_attributes_temp3,
|
|
};
|
|
|
|
static struct attribute *w83781d_attributes_pwm12[] = {
|
|
&sensor_dev_attr_pwm1.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2.dev_attr.attr,
|
|
&dev_attr_pwm2_enable.attr,
|
|
NULL
|
|
};
|
|
static const struct attribute_group w83781d_group_pwm12 = {
|
|
.attrs = w83781d_attributes_pwm12,
|
|
};
|
|
|
|
static struct attribute *w83781d_attributes_pwm34[] = {
|
|
&sensor_dev_attr_pwm3.dev_attr.attr,
|
|
&sensor_dev_attr_pwm4.dev_attr.attr,
|
|
NULL
|
|
};
|
|
static const struct attribute_group w83781d_group_pwm34 = {
|
|
.attrs = w83781d_attributes_pwm34,
|
|
};
|
|
|
|
static struct attribute *w83781d_attributes_other[] = {
|
|
&sensor_dev_attr_temp1_type.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_type.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_type.dev_attr.attr,
|
|
NULL
|
|
};
|
|
static const struct attribute_group w83781d_group_other = {
|
|
.attrs = w83781d_attributes_other,
|
|
};
|
|
|
|
/* No clean up is done on error, it's up to the caller */
|
|
static int
|
|
w83781d_create_files(struct device *dev, int kind, int is_isa)
|
|
{
|
|
int err;
|
|
|
|
err = sysfs_create_group(&dev->kobj, &w83781d_group);
|
|
if (err)
|
|
return err;
|
|
|
|
if (kind != w83783s) {
|
|
err = sysfs_create_group(&dev->kobj, &w83781d_group_in1);
|
|
if (err)
|
|
return err;
|
|
}
|
|
if (kind != as99127f && kind != w83781d && kind != w83783s) {
|
|
err = sysfs_create_group(&dev->kobj, &w83781d_group_in78);
|
|
if (err)
|
|
return err;
|
|
}
|
|
if (kind != w83783s) {
|
|
err = sysfs_create_group(&dev->kobj, &w83781d_group_temp3);
|
|
if (err)
|
|
return err;
|
|
|
|
if (kind != w83781d) {
|
|
err = sysfs_chmod_file(&dev->kobj,
|
|
&sensor_dev_attr_temp3_alarm.dev_attr.attr,
|
|
S_IRUGO | S_IWUSR);
|
|
if (err)
|
|
return err;
|
|
}
|
|
}
|
|
|
|
if (kind != w83781d && kind != as99127f) {
|
|
err = sysfs_create_group(&dev->kobj, &w83781d_group_pwm12);
|
|
if (err)
|
|
return err;
|
|
}
|
|
if (kind == w83782d && !is_isa) {
|
|
err = sysfs_create_group(&dev->kobj, &w83781d_group_pwm34);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
if (kind != as99127f && kind != w83781d) {
|
|
err = device_create_file(dev,
|
|
&sensor_dev_attr_temp1_type.dev_attr);
|
|
if (err)
|
|
return err;
|
|
err = device_create_file(dev,
|
|
&sensor_dev_attr_temp2_type.dev_attr);
|
|
if (err)
|
|
return err;
|
|
if (kind != w83783s) {
|
|
err = device_create_file(dev,
|
|
&sensor_dev_attr_temp3_type.dev_attr);
|
|
if (err)
|
|
return err;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Return 0 if detection is successful, -ENODEV otherwise */
|
|
static int
|
|
w83781d_detect(struct i2c_client *client, struct i2c_board_info *info)
|
|
{
|
|
int val1, val2;
|
|
struct w83781d_data *isa = w83781d_data_if_isa();
|
|
struct i2c_adapter *adapter = client->adapter;
|
|
int address = client->addr;
|
|
const char *client_name;
|
|
enum vendor { winbond, asus } vendid;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
return -ENODEV;
|
|
|
|
/*
|
|
* We block updates of the ISA device to minimize the risk of
|
|
* concurrent access to the same W83781D chip through different
|
|
* interfaces.
|
|
*/
|
|
if (isa)
|
|
mutex_lock(&isa->update_lock);
|
|
|
|
if (i2c_smbus_read_byte_data(client, W83781D_REG_CONFIG) & 0x80) {
|
|
dev_dbg(&adapter->dev,
|
|
"Detection of w83781d chip failed at step 3\n");
|
|
goto err_nodev;
|
|
}
|
|
|
|
val1 = i2c_smbus_read_byte_data(client, W83781D_REG_BANK);
|
|
val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
|
|
/* Check for Winbond or Asus ID if in bank 0 */
|
|
if (!(val1 & 0x07) &&
|
|
((!(val1 & 0x80) && val2 != 0xa3 && val2 != 0xc3) ||
|
|
((val1 & 0x80) && val2 != 0x5c && val2 != 0x12))) {
|
|
dev_dbg(&adapter->dev,
|
|
"Detection of w83781d chip failed at step 4\n");
|
|
goto err_nodev;
|
|
}
|
|
/*
|
|
* If Winbond SMBus, check address at 0x48.
|
|
* Asus doesn't support, except for as99127f rev.2
|
|
*/
|
|
if ((!(val1 & 0x80) && val2 == 0xa3) ||
|
|
((val1 & 0x80) && val2 == 0x5c)) {
|
|
if (i2c_smbus_read_byte_data(client, W83781D_REG_I2C_ADDR)
|
|
!= address) {
|
|
dev_dbg(&adapter->dev,
|
|
"Detection of w83781d chip failed at step 5\n");
|
|
goto err_nodev;
|
|
}
|
|
}
|
|
|
|
/* Put it now into bank 0 and Vendor ID High Byte */
|
|
i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
|
|
(i2c_smbus_read_byte_data(client, W83781D_REG_BANK)
|
|
& 0x78) | 0x80);
|
|
|
|
/* Get the vendor ID */
|
|
val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
|
|
if (val2 == 0x5c)
|
|
vendid = winbond;
|
|
else if (val2 == 0x12)
|
|
vendid = asus;
|
|
else {
|
|
dev_dbg(&adapter->dev,
|
|
"w83781d chip vendor is neither Winbond nor Asus\n");
|
|
goto err_nodev;
|
|
}
|
|
|
|
/* Determine the chip type. */
|
|
val1 = i2c_smbus_read_byte_data(client, W83781D_REG_WCHIPID);
|
|
if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
|
|
client_name = "w83781d";
|
|
else if (val1 == 0x30 && vendid == winbond)
|
|
client_name = "w83782d";
|
|
else if (val1 == 0x40 && vendid == winbond && address == 0x2d)
|
|
client_name = "w83783s";
|
|
else if (val1 == 0x31)
|
|
client_name = "as99127f";
|
|
else
|
|
goto err_nodev;
|
|
|
|
if (val1 <= 0x30 && w83781d_alias_detect(client, val1)) {
|
|
dev_dbg(&adapter->dev,
|
|
"Device at 0x%02x appears to be the same as ISA device\n",
|
|
address);
|
|
goto err_nodev;
|
|
}
|
|
|
|
if (isa)
|
|
mutex_unlock(&isa->update_lock);
|
|
|
|
strlcpy(info->type, client_name, I2C_NAME_SIZE);
|
|
|
|
return 0;
|
|
|
|
err_nodev:
|
|
if (isa)
|
|
mutex_unlock(&isa->update_lock);
|
|
return -ENODEV;
|
|
}
|
|
|
|
static void w83781d_remove_files(struct device *dev)
|
|
{
|
|
sysfs_remove_group(&dev->kobj, &w83781d_group);
|
|
sysfs_remove_group(&dev->kobj, &w83781d_group_in1);
|
|
sysfs_remove_group(&dev->kobj, &w83781d_group_in78);
|
|
sysfs_remove_group(&dev->kobj, &w83781d_group_temp3);
|
|
sysfs_remove_group(&dev->kobj, &w83781d_group_pwm12);
|
|
sysfs_remove_group(&dev->kobj, &w83781d_group_pwm34);
|
|
sysfs_remove_group(&dev->kobj, &w83781d_group_other);
|
|
}
|
|
|
|
static int
|
|
w83781d_probe(struct i2c_client *client, const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct w83781d_data *data;
|
|
int err;
|
|
|
|
data = devm_kzalloc(dev, sizeof(struct w83781d_data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(client, data);
|
|
mutex_init(&data->lock);
|
|
mutex_init(&data->update_lock);
|
|
|
|
data->type = id->driver_data;
|
|
data->client = client;
|
|
|
|
/* attach secondary i2c lm75-like clients */
|
|
err = w83781d_detect_subclients(client);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Initialize the chip */
|
|
w83781d_init_device(dev);
|
|
|
|
/* Register sysfs hooks */
|
|
err = w83781d_create_files(dev, data->type, 0);
|
|
if (err)
|
|
goto exit_remove_files;
|
|
|
|
data->hwmon_dev = hwmon_device_register(dev);
|
|
if (IS_ERR(data->hwmon_dev)) {
|
|
err = PTR_ERR(data->hwmon_dev);
|
|
goto exit_remove_files;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_remove_files:
|
|
w83781d_remove_files(dev);
|
|
if (data->lm75[0])
|
|
i2c_unregister_device(data->lm75[0]);
|
|
if (data->lm75[1])
|
|
i2c_unregister_device(data->lm75[1]);
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
w83781d_remove(struct i2c_client *client)
|
|
{
|
|
struct w83781d_data *data = i2c_get_clientdata(client);
|
|
struct device *dev = &client->dev;
|
|
|
|
hwmon_device_unregister(data->hwmon_dev);
|
|
w83781d_remove_files(dev);
|
|
|
|
if (data->lm75[0])
|
|
i2c_unregister_device(data->lm75[0]);
|
|
if (data->lm75[1])
|
|
i2c_unregister_device(data->lm75[1]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
w83781d_read_value_i2c(struct w83781d_data *data, u16 reg)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
int res, bank;
|
|
struct i2c_client *cl;
|
|
|
|
bank = (reg >> 8) & 0x0f;
|
|
if (bank > 2)
|
|
/* switch banks */
|
|
i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
|
|
bank);
|
|
if (bank == 0 || bank > 2) {
|
|
res = i2c_smbus_read_byte_data(client, reg & 0xff);
|
|
} else {
|
|
/* switch to subclient */
|
|
cl = data->lm75[bank - 1];
|
|
/* convert from ISA to LM75 I2C addresses */
|
|
switch (reg & 0xff) {
|
|
case 0x50: /* TEMP */
|
|
res = i2c_smbus_read_word_swapped(cl, 0);
|
|
break;
|
|
case 0x52: /* CONFIG */
|
|
res = i2c_smbus_read_byte_data(cl, 1);
|
|
break;
|
|
case 0x53: /* HYST */
|
|
res = i2c_smbus_read_word_swapped(cl, 2);
|
|
break;
|
|
case 0x55: /* OVER */
|
|
default:
|
|
res = i2c_smbus_read_word_swapped(cl, 3);
|
|
break;
|
|
}
|
|
}
|
|
if (bank > 2)
|
|
i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
|
|
|
|
return res;
|
|
}
|
|
|
|
static int
|
|
w83781d_write_value_i2c(struct w83781d_data *data, u16 reg, u16 value)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
int bank;
|
|
struct i2c_client *cl;
|
|
|
|
bank = (reg >> 8) & 0x0f;
|
|
if (bank > 2)
|
|
/* switch banks */
|
|
i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
|
|
bank);
|
|
if (bank == 0 || bank > 2) {
|
|
i2c_smbus_write_byte_data(client, reg & 0xff,
|
|
value & 0xff);
|
|
} else {
|
|
/* switch to subclient */
|
|
cl = data->lm75[bank - 1];
|
|
/* convert from ISA to LM75 I2C addresses */
|
|
switch (reg & 0xff) {
|
|
case 0x52: /* CONFIG */
|
|
i2c_smbus_write_byte_data(cl, 1, value & 0xff);
|
|
break;
|
|
case 0x53: /* HYST */
|
|
i2c_smbus_write_word_swapped(cl, 2, value);
|
|
break;
|
|
case 0x55: /* OVER */
|
|
i2c_smbus_write_word_swapped(cl, 3, value);
|
|
break;
|
|
}
|
|
}
|
|
if (bank > 2)
|
|
i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
w83781d_init_device(struct device *dev)
|
|
{
|
|
struct w83781d_data *data = dev_get_drvdata(dev);
|
|
int i, p;
|
|
int type = data->type;
|
|
u8 tmp;
|
|
|
|
if (reset && type != as99127f) { /*
|
|
* this resets registers we don't have
|
|
* documentation for on the as99127f
|
|
*/
|
|
/*
|
|
* Resetting the chip has been the default for a long time,
|
|
* but it causes the BIOS initializations (fan clock dividers,
|
|
* thermal sensor types...) to be lost, so it is now optional.
|
|
* It might even go away if nobody reports it as being useful,
|
|
* as I see very little reason why this would be needed at
|
|
* all.
|
|
*/
|
|
dev_info(dev,
|
|
"If reset=1 solved a problem you were having, please report!\n");
|
|
|
|
/* save these registers */
|
|
i = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
|
|
p = w83781d_read_value(data, W83781D_REG_PWMCLK12);
|
|
/*
|
|
* Reset all except Watchdog values and last conversion values
|
|
* This sets fan-divs to 2, among others
|
|
*/
|
|
w83781d_write_value(data, W83781D_REG_CONFIG, 0x80);
|
|
/*
|
|
* Restore the registers and disable power-on abnormal beep.
|
|
* This saves FAN 1/2/3 input/output values set by BIOS.
|
|
*/
|
|
w83781d_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80);
|
|
w83781d_write_value(data, W83781D_REG_PWMCLK12, p);
|
|
/*
|
|
* Disable master beep-enable (reset turns it on).
|
|
* Individual beep_mask should be reset to off but for some
|
|
* reason disabling this bit helps some people not get beeped
|
|
*/
|
|
w83781d_write_value(data, W83781D_REG_BEEP_INTS2, 0);
|
|
}
|
|
|
|
/*
|
|
* Disable power-on abnormal beep, as advised by the datasheet.
|
|
* Already done if reset=1.
|
|
*/
|
|
if (init && !reset && type != as99127f) {
|
|
i = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
|
|
w83781d_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80);
|
|
}
|
|
|
|
data->vrm = vid_which_vrm();
|
|
|
|
if ((type != w83781d) && (type != as99127f)) {
|
|
tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
|
|
for (i = 1; i <= 3; i++) {
|
|
if (!(tmp & BIT_SCFG1[i - 1])) {
|
|
data->sens[i - 1] = 4;
|
|
} else {
|
|
if (w83781d_read_value
|
|
(data,
|
|
W83781D_REG_SCFG2) & BIT_SCFG2[i - 1])
|
|
data->sens[i - 1] = 1;
|
|
else
|
|
data->sens[i - 1] = 2;
|
|
}
|
|
if (type == w83783s && i == 2)
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (init && type != as99127f) {
|
|
/* Enable temp2 */
|
|
tmp = w83781d_read_value(data, W83781D_REG_TEMP2_CONFIG);
|
|
if (tmp & 0x01) {
|
|
dev_warn(dev,
|
|
"Enabling temp2, readings might not make sense\n");
|
|
w83781d_write_value(data, W83781D_REG_TEMP2_CONFIG,
|
|
tmp & 0xfe);
|
|
}
|
|
|
|
/* Enable temp3 */
|
|
if (type != w83783s) {
|
|
tmp = w83781d_read_value(data,
|
|
W83781D_REG_TEMP3_CONFIG);
|
|
if (tmp & 0x01) {
|
|
dev_warn(dev,
|
|
"Enabling temp3, readings might not make sense\n");
|
|
w83781d_write_value(data,
|
|
W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Start monitoring */
|
|
w83781d_write_value(data, W83781D_REG_CONFIG,
|
|
(w83781d_read_value(data,
|
|
W83781D_REG_CONFIG) & 0xf7)
|
|
| 0x01);
|
|
|
|
/* A few vars need to be filled upon startup */
|
|
for (i = 0; i < 3; i++) {
|
|
data->fan_min[i] = w83781d_read_value(data,
|
|
W83781D_REG_FAN_MIN(i));
|
|
}
|
|
|
|
mutex_init(&data->update_lock);
|
|
}
|
|
|
|
static struct w83781d_data *w83781d_update_device(struct device *dev)
|
|
{
|
|
struct w83781d_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
int i;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|
|
|| !data->valid) {
|
|
dev_dbg(dev, "Starting device update\n");
|
|
|
|
for (i = 0; i <= 8; i++) {
|
|
if (data->type == w83783s && i == 1)
|
|
continue; /* 783S has no in1 */
|
|
data->in[i] =
|
|
w83781d_read_value(data, W83781D_REG_IN(i));
|
|
data->in_min[i] =
|
|
w83781d_read_value(data, W83781D_REG_IN_MIN(i));
|
|
data->in_max[i] =
|
|
w83781d_read_value(data, W83781D_REG_IN_MAX(i));
|
|
if ((data->type != w83782d) && (i == 6))
|
|
break;
|
|
}
|
|
for (i = 0; i < 3; i++) {
|
|
data->fan[i] =
|
|
w83781d_read_value(data, W83781D_REG_FAN(i));
|
|
data->fan_min[i] =
|
|
w83781d_read_value(data, W83781D_REG_FAN_MIN(i));
|
|
}
|
|
if (data->type != w83781d && data->type != as99127f) {
|
|
for (i = 0; i < 4; i++) {
|
|
data->pwm[i] =
|
|
w83781d_read_value(data,
|
|
W83781D_REG_PWM[i]);
|
|
/* Only W83782D on SMBus has PWM3 and PWM4 */
|
|
if ((data->type != w83782d || !client)
|
|
&& i == 1)
|
|
break;
|
|
}
|
|
/* Only PWM2 can be disabled */
|
|
data->pwm2_enable = (w83781d_read_value(data,
|
|
W83781D_REG_PWMCLK12) & 0x08) >> 3;
|
|
}
|
|
|
|
data->temp = w83781d_read_value(data, W83781D_REG_TEMP(1));
|
|
data->temp_max =
|
|
w83781d_read_value(data, W83781D_REG_TEMP_OVER(1));
|
|
data->temp_max_hyst =
|
|
w83781d_read_value(data, W83781D_REG_TEMP_HYST(1));
|
|
data->temp_add[0] =
|
|
w83781d_read_value(data, W83781D_REG_TEMP(2));
|
|
data->temp_max_add[0] =
|
|
w83781d_read_value(data, W83781D_REG_TEMP_OVER(2));
|
|
data->temp_max_hyst_add[0] =
|
|
w83781d_read_value(data, W83781D_REG_TEMP_HYST(2));
|
|
if (data->type != w83783s) {
|
|
data->temp_add[1] =
|
|
w83781d_read_value(data, W83781D_REG_TEMP(3));
|
|
data->temp_max_add[1] =
|
|
w83781d_read_value(data,
|
|
W83781D_REG_TEMP_OVER(3));
|
|
data->temp_max_hyst_add[1] =
|
|
w83781d_read_value(data,
|
|
W83781D_REG_TEMP_HYST(3));
|
|
}
|
|
i = w83781d_read_value(data, W83781D_REG_VID_FANDIV);
|
|
data->vid = i & 0x0f;
|
|
data->vid |= (w83781d_read_value(data,
|
|
W83781D_REG_CHIPID) & 0x01) << 4;
|
|
data->fan_div[0] = (i >> 4) & 0x03;
|
|
data->fan_div[1] = (i >> 6) & 0x03;
|
|
data->fan_div[2] = (w83781d_read_value(data,
|
|
W83781D_REG_PIN) >> 6) & 0x03;
|
|
if ((data->type != w83781d) && (data->type != as99127f)) {
|
|
i = w83781d_read_value(data, W83781D_REG_VBAT);
|
|
data->fan_div[0] |= (i >> 3) & 0x04;
|
|
data->fan_div[1] |= (i >> 4) & 0x04;
|
|
data->fan_div[2] |= (i >> 5) & 0x04;
|
|
}
|
|
if (data->type == w83782d) {
|
|
data->alarms = w83781d_read_value(data,
|
|
W83782D_REG_ALARM1)
|
|
| (w83781d_read_value(data,
|
|
W83782D_REG_ALARM2) << 8)
|
|
| (w83781d_read_value(data,
|
|
W83782D_REG_ALARM3) << 16);
|
|
} else if (data->type == w83783s) {
|
|
data->alarms = w83781d_read_value(data,
|
|
W83782D_REG_ALARM1)
|
|
| (w83781d_read_value(data,
|
|
W83782D_REG_ALARM2) << 8);
|
|
} else {
|
|
/*
|
|
* No real-time status registers, fall back to
|
|
* interrupt status registers
|
|
*/
|
|
data->alarms = w83781d_read_value(data,
|
|
W83781D_REG_ALARM1)
|
|
| (w83781d_read_value(data,
|
|
W83781D_REG_ALARM2) << 8);
|
|
}
|
|
i = w83781d_read_value(data, W83781D_REG_BEEP_INTS2);
|
|
data->beep_mask = (i << 8) +
|
|
w83781d_read_value(data, W83781D_REG_BEEP_INTS1);
|
|
if ((data->type != w83781d) && (data->type != as99127f)) {
|
|
data->beep_mask |=
|
|
w83781d_read_value(data,
|
|
W83781D_REG_BEEP_INTS3) << 16;
|
|
}
|
|
data->last_updated = jiffies;
|
|
data->valid = 1;
|
|
}
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return data;
|
|
}
|
|
|
|
static const struct i2c_device_id w83781d_ids[] = {
|
|
{ "w83781d", w83781d, },
|
|
{ "w83782d", w83782d, },
|
|
{ "w83783s", w83783s, },
|
|
{ "as99127f", as99127f },
|
|
{ /* LIST END */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, w83781d_ids);
|
|
|
|
static struct i2c_driver w83781d_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "w83781d",
|
|
},
|
|
.probe = w83781d_probe,
|
|
.remove = w83781d_remove,
|
|
.id_table = w83781d_ids,
|
|
.detect = w83781d_detect,
|
|
.address_list = normal_i2c,
|
|
};
|
|
|
|
/*
|
|
* ISA related code
|
|
*/
|
|
#ifdef CONFIG_ISA
|
|
|
|
/* ISA device, if found */
|
|
static struct platform_device *pdev;
|
|
|
|
static unsigned short isa_address = 0x290;
|
|
|
|
/*
|
|
* I2C devices get this name attribute automatically, but for ISA devices
|
|
* we must create it by ourselves.
|
|
*/
|
|
static ssize_t
|
|
show_name(struct device *dev, struct device_attribute *devattr, char *buf)
|
|
{
|
|
struct w83781d_data *data = dev_get_drvdata(dev);
|
|
return sprintf(buf, "%s\n", data->name);
|
|
}
|
|
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
|
|
|
|
static struct w83781d_data *w83781d_data_if_isa(void)
|
|
{
|
|
return pdev ? platform_get_drvdata(pdev) : NULL;
|
|
}
|
|
|
|
/* Returns 1 if the I2C chip appears to be an alias of the ISA chip */
|
|
static int w83781d_alias_detect(struct i2c_client *client, u8 chipid)
|
|
{
|
|
struct w83781d_data *isa;
|
|
int i;
|
|
|
|
if (!pdev) /* No ISA chip */
|
|
return 0;
|
|
|
|
isa = platform_get_drvdata(pdev);
|
|
|
|
if (w83781d_read_value(isa, W83781D_REG_I2C_ADDR) != client->addr)
|
|
return 0; /* Address doesn't match */
|
|
if (w83781d_read_value(isa, W83781D_REG_WCHIPID) != chipid)
|
|
return 0; /* Chip type doesn't match */
|
|
|
|
/*
|
|
* We compare all the limit registers, the config register and the
|
|
* interrupt mask registers
|
|
*/
|
|
for (i = 0x2b; i <= 0x3d; i++) {
|
|
if (w83781d_read_value(isa, i) !=
|
|
i2c_smbus_read_byte_data(client, i))
|
|
return 0;
|
|
}
|
|
if (w83781d_read_value(isa, W83781D_REG_CONFIG) !=
|
|
i2c_smbus_read_byte_data(client, W83781D_REG_CONFIG))
|
|
return 0;
|
|
for (i = 0x43; i <= 0x46; i++) {
|
|
if (w83781d_read_value(isa, i) !=
|
|
i2c_smbus_read_byte_data(client, i))
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int
|
|
w83781d_read_value_isa(struct w83781d_data *data, u16 reg)
|
|
{
|
|
int word_sized, res;
|
|
|
|
word_sized = (((reg & 0xff00) == 0x100)
|
|
|| ((reg & 0xff00) == 0x200))
|
|
&& (((reg & 0x00ff) == 0x50)
|
|
|| ((reg & 0x00ff) == 0x53)
|
|
|| ((reg & 0x00ff) == 0x55));
|
|
if (reg & 0xff00) {
|
|
outb_p(W83781D_REG_BANK,
|
|
data->isa_addr + W83781D_ADDR_REG_OFFSET);
|
|
outb_p(reg >> 8,
|
|
data->isa_addr + W83781D_DATA_REG_OFFSET);
|
|
}
|
|
outb_p(reg & 0xff, data->isa_addr + W83781D_ADDR_REG_OFFSET);
|
|
res = inb_p(data->isa_addr + W83781D_DATA_REG_OFFSET);
|
|
if (word_sized) {
|
|
outb_p((reg & 0xff) + 1,
|
|
data->isa_addr + W83781D_ADDR_REG_OFFSET);
|
|
res =
|
|
(res << 8) + inb_p(data->isa_addr +
|
|
W83781D_DATA_REG_OFFSET);
|
|
}
|
|
if (reg & 0xff00) {
|
|
outb_p(W83781D_REG_BANK,
|
|
data->isa_addr + W83781D_ADDR_REG_OFFSET);
|
|
outb_p(0, data->isa_addr + W83781D_DATA_REG_OFFSET);
|
|
}
|
|
return res;
|
|
}
|
|
|
|
static void
|
|
w83781d_write_value_isa(struct w83781d_data *data, u16 reg, u16 value)
|
|
{
|
|
int word_sized;
|
|
|
|
word_sized = (((reg & 0xff00) == 0x100)
|
|
|| ((reg & 0xff00) == 0x200))
|
|
&& (((reg & 0x00ff) == 0x53)
|
|
|| ((reg & 0x00ff) == 0x55));
|
|
if (reg & 0xff00) {
|
|
outb_p(W83781D_REG_BANK,
|
|
data->isa_addr + W83781D_ADDR_REG_OFFSET);
|
|
outb_p(reg >> 8,
|
|
data->isa_addr + W83781D_DATA_REG_OFFSET);
|
|
}
|
|
outb_p(reg & 0xff, data->isa_addr + W83781D_ADDR_REG_OFFSET);
|
|
if (word_sized) {
|
|
outb_p(value >> 8,
|
|
data->isa_addr + W83781D_DATA_REG_OFFSET);
|
|
outb_p((reg & 0xff) + 1,
|
|
data->isa_addr + W83781D_ADDR_REG_OFFSET);
|
|
}
|
|
outb_p(value & 0xff, data->isa_addr + W83781D_DATA_REG_OFFSET);
|
|
if (reg & 0xff00) {
|
|
outb_p(W83781D_REG_BANK,
|
|
data->isa_addr + W83781D_ADDR_REG_OFFSET);
|
|
outb_p(0, data->isa_addr + W83781D_DATA_REG_OFFSET);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* The SMBus locks itself, usually, but nothing may access the Winbond between
|
|
* bank switches. ISA access must always be locked explicitly!
|
|
* We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks,
|
|
* would slow down the W83781D access and should not be necessary.
|
|
* There are some ugly typecasts here, but the good news is - they should
|
|
* nowhere else be necessary!
|
|
*/
|
|
static int
|
|
w83781d_read_value(struct w83781d_data *data, u16 reg)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
int res;
|
|
|
|
mutex_lock(&data->lock);
|
|
if (client)
|
|
res = w83781d_read_value_i2c(data, reg);
|
|
else
|
|
res = w83781d_read_value_isa(data, reg);
|
|
mutex_unlock(&data->lock);
|
|
return res;
|
|
}
|
|
|
|
static int
|
|
w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
|
|
mutex_lock(&data->lock);
|
|
if (client)
|
|
w83781d_write_value_i2c(data, reg, value);
|
|
else
|
|
w83781d_write_value_isa(data, reg, value);
|
|
mutex_unlock(&data->lock);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
w83781d_isa_probe(struct platform_device *pdev)
|
|
{
|
|
int err, reg;
|
|
struct w83781d_data *data;
|
|
struct resource *res;
|
|
|
|
/* Reserve the ISA region */
|
|
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
|
|
if (!devm_request_region(&pdev->dev,
|
|
res->start + W83781D_ADDR_REG_OFFSET, 2,
|
|
"w83781d"))
|
|
return -EBUSY;
|
|
|
|
data = devm_kzalloc(&pdev->dev, sizeof(struct w83781d_data),
|
|
GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&data->lock);
|
|
data->isa_addr = res->start;
|
|
platform_set_drvdata(pdev, data);
|
|
|
|
reg = w83781d_read_value(data, W83781D_REG_WCHIPID);
|
|
switch (reg) {
|
|
case 0x30:
|
|
data->type = w83782d;
|
|
data->name = "w83782d";
|
|
break;
|
|
default:
|
|
data->type = w83781d;
|
|
data->name = "w83781d";
|
|
}
|
|
|
|
/* Initialize the W83781D chip */
|
|
w83781d_init_device(&pdev->dev);
|
|
|
|
/* Register sysfs hooks */
|
|
err = w83781d_create_files(&pdev->dev, data->type, 1);
|
|
if (err)
|
|
goto exit_remove_files;
|
|
|
|
err = device_create_file(&pdev->dev, &dev_attr_name);
|
|
if (err)
|
|
goto exit_remove_files;
|
|
|
|
data->hwmon_dev = hwmon_device_register(&pdev->dev);
|
|
if (IS_ERR(data->hwmon_dev)) {
|
|
err = PTR_ERR(data->hwmon_dev);
|
|
goto exit_remove_files;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_remove_files:
|
|
w83781d_remove_files(&pdev->dev);
|
|
device_remove_file(&pdev->dev, &dev_attr_name);
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
w83781d_isa_remove(struct platform_device *pdev)
|
|
{
|
|
struct w83781d_data *data = platform_get_drvdata(pdev);
|
|
|
|
hwmon_device_unregister(data->hwmon_dev);
|
|
w83781d_remove_files(&pdev->dev);
|
|
device_remove_file(&pdev->dev, &dev_attr_name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver w83781d_isa_driver = {
|
|
.driver = {
|
|
.name = "w83781d",
|
|
},
|
|
.probe = w83781d_isa_probe,
|
|
.remove = w83781d_isa_remove,
|
|
};
|
|
|
|
/* return 1 if a supported chip is found, 0 otherwise */
|
|
static int __init
|
|
w83781d_isa_found(unsigned short address)
|
|
{
|
|
int val, save, found = 0;
|
|
int port;
|
|
|
|
/*
|
|
* Some boards declare base+0 to base+7 as a PNP device, some base+4
|
|
* to base+7 and some base+5 to base+6. So we better request each port
|
|
* individually for the probing phase.
|
|
*/
|
|
for (port = address; port < address + W83781D_EXTENT; port++) {
|
|
if (!request_region(port, 1, "w83781d")) {
|
|
pr_debug("Failed to request port 0x%x\n", port);
|
|
goto release;
|
|
}
|
|
}
|
|
|
|
#define REALLY_SLOW_IO
|
|
/*
|
|
* We need the timeouts for at least some W83781D-like
|
|
* chips. But only if we read 'undefined' registers.
|
|
*/
|
|
val = inb_p(address + 1);
|
|
if (inb_p(address + 2) != val
|
|
|| inb_p(address + 3) != val
|
|
|| inb_p(address + 7) != val) {
|
|
pr_debug("Detection failed at step %d\n", 1);
|
|
goto release;
|
|
}
|
|
#undef REALLY_SLOW_IO
|
|
|
|
/*
|
|
* We should be able to change the 7 LSB of the address port. The
|
|
* MSB (busy flag) should be clear initially, set after the write.
|
|
*/
|
|
save = inb_p(address + W83781D_ADDR_REG_OFFSET);
|
|
if (save & 0x80) {
|
|
pr_debug("Detection failed at step %d\n", 2);
|
|
goto release;
|
|
}
|
|
val = ~save & 0x7f;
|
|
outb_p(val, address + W83781D_ADDR_REG_OFFSET);
|
|
if (inb_p(address + W83781D_ADDR_REG_OFFSET) != (val | 0x80)) {
|
|
outb_p(save, address + W83781D_ADDR_REG_OFFSET);
|
|
pr_debug("Detection failed at step %d\n", 3);
|
|
goto release;
|
|
}
|
|
|
|
/* We found a device, now see if it could be a W83781D */
|
|
outb_p(W83781D_REG_CONFIG, address + W83781D_ADDR_REG_OFFSET);
|
|
val = inb_p(address + W83781D_DATA_REG_OFFSET);
|
|
if (val & 0x80) {
|
|
pr_debug("Detection failed at step %d\n", 4);
|
|
goto release;
|
|
}
|
|
outb_p(W83781D_REG_BANK, address + W83781D_ADDR_REG_OFFSET);
|
|
save = inb_p(address + W83781D_DATA_REG_OFFSET);
|
|
outb_p(W83781D_REG_CHIPMAN, address + W83781D_ADDR_REG_OFFSET);
|
|
val = inb_p(address + W83781D_DATA_REG_OFFSET);
|
|
if ((!(save & 0x80) && (val != 0xa3))
|
|
|| ((save & 0x80) && (val != 0x5c))) {
|
|
pr_debug("Detection failed at step %d\n", 5);
|
|
goto release;
|
|
}
|
|
outb_p(W83781D_REG_I2C_ADDR, address + W83781D_ADDR_REG_OFFSET);
|
|
val = inb_p(address + W83781D_DATA_REG_OFFSET);
|
|
if (val < 0x03 || val > 0x77) { /* Not a valid I2C address */
|
|
pr_debug("Detection failed at step %d\n", 6);
|
|
goto release;
|
|
}
|
|
|
|
/* The busy flag should be clear again */
|
|
if (inb_p(address + W83781D_ADDR_REG_OFFSET) & 0x80) {
|
|
pr_debug("Detection failed at step %d\n", 7);
|
|
goto release;
|
|
}
|
|
|
|
/* Determine the chip type */
|
|
outb_p(W83781D_REG_BANK, address + W83781D_ADDR_REG_OFFSET);
|
|
save = inb_p(address + W83781D_DATA_REG_OFFSET);
|
|
outb_p(save & 0xf8, address + W83781D_DATA_REG_OFFSET);
|
|
outb_p(W83781D_REG_WCHIPID, address + W83781D_ADDR_REG_OFFSET);
|
|
val = inb_p(address + W83781D_DATA_REG_OFFSET);
|
|
if ((val & 0xfe) == 0x10 /* W83781D */
|
|
|| val == 0x30) /* W83782D */
|
|
found = 1;
|
|
|
|
if (found)
|
|
pr_info("Found a %s chip at %#x\n",
|
|
val == 0x30 ? "W83782D" : "W83781D", (int)address);
|
|
|
|
release:
|
|
for (port--; port >= address; port--)
|
|
release_region(port, 1);
|
|
return found;
|
|
}
|
|
|
|
static int __init
|
|
w83781d_isa_device_add(unsigned short address)
|
|
{
|
|
struct resource res = {
|
|
.start = address,
|
|
.end = address + W83781D_EXTENT - 1,
|
|
.name = "w83781d",
|
|
.flags = IORESOURCE_IO,
|
|
};
|
|
int err;
|
|
|
|
pdev = platform_device_alloc("w83781d", address);
|
|
if (!pdev) {
|
|
err = -ENOMEM;
|
|
pr_err("Device allocation failed\n");
|
|
goto exit;
|
|
}
|
|
|
|
err = platform_device_add_resources(pdev, &res, 1);
|
|
if (err) {
|
|
pr_err("Device resource addition failed (%d)\n", err);
|
|
goto exit_device_put;
|
|
}
|
|
|
|
err = platform_device_add(pdev);
|
|
if (err) {
|
|
pr_err("Device addition failed (%d)\n", err);
|
|
goto exit_device_put;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_device_put:
|
|
platform_device_put(pdev);
|
|
exit:
|
|
pdev = NULL;
|
|
return err;
|
|
}
|
|
|
|
static int __init
|
|
w83781d_isa_register(void)
|
|
{
|
|
int res;
|
|
|
|
if (w83781d_isa_found(isa_address)) {
|
|
res = platform_driver_register(&w83781d_isa_driver);
|
|
if (res)
|
|
goto exit;
|
|
|
|
/* Sets global pdev as a side effect */
|
|
res = w83781d_isa_device_add(isa_address);
|
|
if (res)
|
|
goto exit_unreg_isa_driver;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_unreg_isa_driver:
|
|
platform_driver_unregister(&w83781d_isa_driver);
|
|
exit:
|
|
return res;
|
|
}
|
|
|
|
static void
|
|
w83781d_isa_unregister(void)
|
|
{
|
|
if (pdev) {
|
|
platform_device_unregister(pdev);
|
|
platform_driver_unregister(&w83781d_isa_driver);
|
|
}
|
|
}
|
|
#else /* !CONFIG_ISA */
|
|
|
|
static struct w83781d_data *w83781d_data_if_isa(void)
|
|
{
|
|
return NULL;
|
|
}
|
|
|
|
static int
|
|
w83781d_alias_detect(struct i2c_client *client, u8 chipid)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
w83781d_read_value(struct w83781d_data *data, u16 reg)
|
|
{
|
|
int res;
|
|
|
|
mutex_lock(&data->lock);
|
|
res = w83781d_read_value_i2c(data, reg);
|
|
mutex_unlock(&data->lock);
|
|
|
|
return res;
|
|
}
|
|
|
|
static int
|
|
w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value)
|
|
{
|
|
mutex_lock(&data->lock);
|
|
w83781d_write_value_i2c(data, reg, value);
|
|
mutex_unlock(&data->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init
|
|
w83781d_isa_register(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
w83781d_isa_unregister(void)
|
|
{
|
|
}
|
|
#endif /* CONFIG_ISA */
|
|
|
|
static int __init
|
|
sensors_w83781d_init(void)
|
|
{
|
|
int res;
|
|
|
|
/*
|
|
* We register the ISA device first, so that we can skip the
|
|
* registration of an I2C interface to the same device.
|
|
*/
|
|
res = w83781d_isa_register();
|
|
if (res)
|
|
goto exit;
|
|
|
|
res = i2c_add_driver(&w83781d_driver);
|
|
if (res)
|
|
goto exit_unreg_isa;
|
|
|
|
return 0;
|
|
|
|
exit_unreg_isa:
|
|
w83781d_isa_unregister();
|
|
exit:
|
|
return res;
|
|
}
|
|
|
|
static void __exit
|
|
sensors_w83781d_exit(void)
|
|
{
|
|
w83781d_isa_unregister();
|
|
i2c_del_driver(&w83781d_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
|
|
"Philip Edelbrock <phil@netroedge.com>, "
|
|
"and Mark Studebaker <mdsxyz123@yahoo.com>");
|
|
MODULE_DESCRIPTION("W83781D driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(sensors_w83781d_init);
|
|
module_exit(sensors_w83781d_exit);
|