mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-19 13:46:46 +07:00
28c70f162a
We need two special things to properly wire this up: - Add another argument to gmbus_wait_hw_status to pass in the correct interrupt bit in gmbus4. - Since we can only get an irq for one of the two events we want, hand-roll the wait_event_timeout code so that we wake up every jiffie and can check for NAKs. This way we also subsume gmbus support for platforms without interrupts (or where those are not yet enabled). The important bit really is to only enable one gmbus interrupt source at the same time - with that piece of lore figured out, this seems to work flawlessly. Ben Widawsky rightfully complained the lack of measurements for the claimed benefits (especially since the first version was actually broken and fell back to bit-banging). Previously reading the 256 byte hdmi EDID takes about 72 ms here. With this patch it's down to 33 ms. Given that transfering the 256 bytes over i2c at wire speed takes 20.5ms alone, the reduction in additional overhead is rather nice. v2: Chris Wilson wondered whether GMBUS4 might contain some set bits when booting up an hence result in some spurious interrupts. Since we clear GMBUS4 after every wait and we do gmbus transfer really early in the setup sequence to detect displays the window is small, but still be paranoid and clear it properly. v3: Clarify the comment that gmbus irq generation can only support one kind of event, why it bothers us and how we work around that limit. Cc: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2773 lines
76 KiB
C
2773 lines
76 KiB
C
/* i915_irq.c -- IRQ support for the I915 -*- linux-c -*-
|
|
*/
|
|
/*
|
|
* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
|
|
* All Rights Reserved.
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the
|
|
* "Software"), to deal in the Software without restriction, including
|
|
* without limitation the rights to use, copy, modify, merge, publish,
|
|
* distribute, sub license, and/or sell copies of the Software, and to
|
|
* permit persons to whom the Software is furnished to do so, subject to
|
|
* the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the
|
|
* next paragraph) shall be included in all copies or substantial portions
|
|
* of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
|
|
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
|
|
* IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
|
|
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
|
|
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
|
|
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/sysrq.h>
|
|
#include <linux/slab.h>
|
|
#include <drm/drmP.h>
|
|
#include <drm/i915_drm.h>
|
|
#include "i915_drv.h"
|
|
#include "i915_trace.h"
|
|
#include "intel_drv.h"
|
|
|
|
/* For display hotplug interrupt */
|
|
static void
|
|
ironlake_enable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
|
|
{
|
|
if ((dev_priv->irq_mask & mask) != 0) {
|
|
dev_priv->irq_mask &= ~mask;
|
|
I915_WRITE(DEIMR, dev_priv->irq_mask);
|
|
POSTING_READ(DEIMR);
|
|
}
|
|
}
|
|
|
|
static inline void
|
|
ironlake_disable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
|
|
{
|
|
if ((dev_priv->irq_mask & mask) != mask) {
|
|
dev_priv->irq_mask |= mask;
|
|
I915_WRITE(DEIMR, dev_priv->irq_mask);
|
|
POSTING_READ(DEIMR);
|
|
}
|
|
}
|
|
|
|
void
|
|
i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
|
|
{
|
|
if ((dev_priv->pipestat[pipe] & mask) != mask) {
|
|
u32 reg = PIPESTAT(pipe);
|
|
|
|
dev_priv->pipestat[pipe] |= mask;
|
|
/* Enable the interrupt, clear any pending status */
|
|
I915_WRITE(reg, dev_priv->pipestat[pipe] | (mask >> 16));
|
|
POSTING_READ(reg);
|
|
}
|
|
}
|
|
|
|
void
|
|
i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
|
|
{
|
|
if ((dev_priv->pipestat[pipe] & mask) != 0) {
|
|
u32 reg = PIPESTAT(pipe);
|
|
|
|
dev_priv->pipestat[pipe] &= ~mask;
|
|
I915_WRITE(reg, dev_priv->pipestat[pipe]);
|
|
POSTING_READ(reg);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* intel_enable_asle - enable ASLE interrupt for OpRegion
|
|
*/
|
|
void intel_enable_asle(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
|
unsigned long irqflags;
|
|
|
|
/* FIXME: opregion/asle for VLV */
|
|
if (IS_VALLEYVIEW(dev))
|
|
return;
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
|
|
if (HAS_PCH_SPLIT(dev))
|
|
ironlake_enable_display_irq(dev_priv, DE_GSE);
|
|
else {
|
|
i915_enable_pipestat(dev_priv, 1,
|
|
PIPE_LEGACY_BLC_EVENT_ENABLE);
|
|
if (INTEL_INFO(dev)->gen >= 4)
|
|
i915_enable_pipestat(dev_priv, 0,
|
|
PIPE_LEGACY_BLC_EVENT_ENABLE);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
}
|
|
|
|
/**
|
|
* i915_pipe_enabled - check if a pipe is enabled
|
|
* @dev: DRM device
|
|
* @pipe: pipe to check
|
|
*
|
|
* Reading certain registers when the pipe is disabled can hang the chip.
|
|
* Use this routine to make sure the PLL is running and the pipe is active
|
|
* before reading such registers if unsure.
|
|
*/
|
|
static int
|
|
i915_pipe_enabled(struct drm_device *dev, int pipe)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
|
|
pipe);
|
|
|
|
return I915_READ(PIPECONF(cpu_transcoder)) & PIPECONF_ENABLE;
|
|
}
|
|
|
|
/* Called from drm generic code, passed a 'crtc', which
|
|
* we use as a pipe index
|
|
*/
|
|
static u32 i915_get_vblank_counter(struct drm_device *dev, int pipe)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
unsigned long high_frame;
|
|
unsigned long low_frame;
|
|
u32 high1, high2, low;
|
|
|
|
if (!i915_pipe_enabled(dev, pipe)) {
|
|
DRM_DEBUG_DRIVER("trying to get vblank count for disabled "
|
|
"pipe %c\n", pipe_name(pipe));
|
|
return 0;
|
|
}
|
|
|
|
high_frame = PIPEFRAME(pipe);
|
|
low_frame = PIPEFRAMEPIXEL(pipe);
|
|
|
|
/*
|
|
* High & low register fields aren't synchronized, so make sure
|
|
* we get a low value that's stable across two reads of the high
|
|
* register.
|
|
*/
|
|
do {
|
|
high1 = I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK;
|
|
low = I915_READ(low_frame) & PIPE_FRAME_LOW_MASK;
|
|
high2 = I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK;
|
|
} while (high1 != high2);
|
|
|
|
high1 >>= PIPE_FRAME_HIGH_SHIFT;
|
|
low >>= PIPE_FRAME_LOW_SHIFT;
|
|
return (high1 << 8) | low;
|
|
}
|
|
|
|
static u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
int reg = PIPE_FRMCOUNT_GM45(pipe);
|
|
|
|
if (!i915_pipe_enabled(dev, pipe)) {
|
|
DRM_DEBUG_DRIVER("trying to get vblank count for disabled "
|
|
"pipe %c\n", pipe_name(pipe));
|
|
return 0;
|
|
}
|
|
|
|
return I915_READ(reg);
|
|
}
|
|
|
|
static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
|
|
int *vpos, int *hpos)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
u32 vbl = 0, position = 0;
|
|
int vbl_start, vbl_end, htotal, vtotal;
|
|
bool in_vbl = true;
|
|
int ret = 0;
|
|
enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
|
|
pipe);
|
|
|
|
if (!i915_pipe_enabled(dev, pipe)) {
|
|
DRM_DEBUG_DRIVER("trying to get scanoutpos for disabled "
|
|
"pipe %c\n", pipe_name(pipe));
|
|
return 0;
|
|
}
|
|
|
|
/* Get vtotal. */
|
|
vtotal = 1 + ((I915_READ(VTOTAL(cpu_transcoder)) >> 16) & 0x1fff);
|
|
|
|
if (INTEL_INFO(dev)->gen >= 4) {
|
|
/* No obvious pixelcount register. Only query vertical
|
|
* scanout position from Display scan line register.
|
|
*/
|
|
position = I915_READ(PIPEDSL(pipe));
|
|
|
|
/* Decode into vertical scanout position. Don't have
|
|
* horizontal scanout position.
|
|
*/
|
|
*vpos = position & 0x1fff;
|
|
*hpos = 0;
|
|
} else {
|
|
/* Have access to pixelcount since start of frame.
|
|
* We can split this into vertical and horizontal
|
|
* scanout position.
|
|
*/
|
|
position = (I915_READ(PIPEFRAMEPIXEL(pipe)) & PIPE_PIXEL_MASK) >> PIPE_PIXEL_SHIFT;
|
|
|
|
htotal = 1 + ((I915_READ(HTOTAL(cpu_transcoder)) >> 16) & 0x1fff);
|
|
*vpos = position / htotal;
|
|
*hpos = position - (*vpos * htotal);
|
|
}
|
|
|
|
/* Query vblank area. */
|
|
vbl = I915_READ(VBLANK(cpu_transcoder));
|
|
|
|
/* Test position against vblank region. */
|
|
vbl_start = vbl & 0x1fff;
|
|
vbl_end = (vbl >> 16) & 0x1fff;
|
|
|
|
if ((*vpos < vbl_start) || (*vpos > vbl_end))
|
|
in_vbl = false;
|
|
|
|
/* Inside "upper part" of vblank area? Apply corrective offset: */
|
|
if (in_vbl && (*vpos >= vbl_start))
|
|
*vpos = *vpos - vtotal;
|
|
|
|
/* Readouts valid? */
|
|
if (vbl > 0)
|
|
ret |= DRM_SCANOUTPOS_VALID | DRM_SCANOUTPOS_ACCURATE;
|
|
|
|
/* In vblank? */
|
|
if (in_vbl)
|
|
ret |= DRM_SCANOUTPOS_INVBL;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int i915_get_vblank_timestamp(struct drm_device *dev, int pipe,
|
|
int *max_error,
|
|
struct timeval *vblank_time,
|
|
unsigned flags)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_crtc *crtc;
|
|
|
|
if (pipe < 0 || pipe >= dev_priv->num_pipe) {
|
|
DRM_ERROR("Invalid crtc %d\n", pipe);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Get drm_crtc to timestamp: */
|
|
crtc = intel_get_crtc_for_pipe(dev, pipe);
|
|
if (crtc == NULL) {
|
|
DRM_ERROR("Invalid crtc %d\n", pipe);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!crtc->enabled) {
|
|
DRM_DEBUG_KMS("crtc %d is disabled\n", pipe);
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* Helper routine in DRM core does all the work: */
|
|
return drm_calc_vbltimestamp_from_scanoutpos(dev, pipe, max_error,
|
|
vblank_time, flags,
|
|
crtc);
|
|
}
|
|
|
|
/*
|
|
* Handle hotplug events outside the interrupt handler proper.
|
|
*/
|
|
static void i915_hotplug_work_func(struct work_struct *work)
|
|
{
|
|
drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
|
|
hotplug_work);
|
|
struct drm_device *dev = dev_priv->dev;
|
|
struct drm_mode_config *mode_config = &dev->mode_config;
|
|
struct intel_encoder *encoder;
|
|
|
|
/* HPD irq before everything is fully set up. */
|
|
if (!dev_priv->enable_hotplug_processing)
|
|
return;
|
|
|
|
mutex_lock(&mode_config->mutex);
|
|
DRM_DEBUG_KMS("running encoder hotplug functions\n");
|
|
|
|
list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
|
|
if (encoder->hot_plug)
|
|
encoder->hot_plug(encoder);
|
|
|
|
mutex_unlock(&mode_config->mutex);
|
|
|
|
/* Just fire off a uevent and let userspace tell us what to do */
|
|
drm_helper_hpd_irq_event(dev);
|
|
}
|
|
|
|
static void ironlake_handle_rps_change(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
|
u32 busy_up, busy_down, max_avg, min_avg;
|
|
u8 new_delay;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&mchdev_lock, flags);
|
|
|
|
I915_WRITE16(MEMINTRSTS, I915_READ(MEMINTRSTS));
|
|
|
|
new_delay = dev_priv->ips.cur_delay;
|
|
|
|
I915_WRITE16(MEMINTRSTS, MEMINT_EVAL_CHG);
|
|
busy_up = I915_READ(RCPREVBSYTUPAVG);
|
|
busy_down = I915_READ(RCPREVBSYTDNAVG);
|
|
max_avg = I915_READ(RCBMAXAVG);
|
|
min_avg = I915_READ(RCBMINAVG);
|
|
|
|
/* Handle RCS change request from hw */
|
|
if (busy_up > max_avg) {
|
|
if (dev_priv->ips.cur_delay != dev_priv->ips.max_delay)
|
|
new_delay = dev_priv->ips.cur_delay - 1;
|
|
if (new_delay < dev_priv->ips.max_delay)
|
|
new_delay = dev_priv->ips.max_delay;
|
|
} else if (busy_down < min_avg) {
|
|
if (dev_priv->ips.cur_delay != dev_priv->ips.min_delay)
|
|
new_delay = dev_priv->ips.cur_delay + 1;
|
|
if (new_delay > dev_priv->ips.min_delay)
|
|
new_delay = dev_priv->ips.min_delay;
|
|
}
|
|
|
|
if (ironlake_set_drps(dev, new_delay))
|
|
dev_priv->ips.cur_delay = new_delay;
|
|
|
|
spin_unlock_irqrestore(&mchdev_lock, flags);
|
|
|
|
return;
|
|
}
|
|
|
|
static void notify_ring(struct drm_device *dev,
|
|
struct intel_ring_buffer *ring)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (ring->obj == NULL)
|
|
return;
|
|
|
|
trace_i915_gem_request_complete(ring, ring->get_seqno(ring, false));
|
|
|
|
wake_up_all(&ring->irq_queue);
|
|
if (i915_enable_hangcheck) {
|
|
dev_priv->hangcheck_count = 0;
|
|
mod_timer(&dev_priv->hangcheck_timer,
|
|
round_jiffies_up(jiffies + DRM_I915_HANGCHECK_JIFFIES));
|
|
}
|
|
}
|
|
|
|
static void gen6_pm_rps_work(struct work_struct *work)
|
|
{
|
|
drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
|
|
rps.work);
|
|
u32 pm_iir, pm_imr;
|
|
u8 new_delay;
|
|
|
|
spin_lock_irq(&dev_priv->rps.lock);
|
|
pm_iir = dev_priv->rps.pm_iir;
|
|
dev_priv->rps.pm_iir = 0;
|
|
pm_imr = I915_READ(GEN6_PMIMR);
|
|
I915_WRITE(GEN6_PMIMR, 0);
|
|
spin_unlock_irq(&dev_priv->rps.lock);
|
|
|
|
if ((pm_iir & GEN6_PM_DEFERRED_EVENTS) == 0)
|
|
return;
|
|
|
|
mutex_lock(&dev_priv->rps.hw_lock);
|
|
|
|
if (pm_iir & GEN6_PM_RP_UP_THRESHOLD)
|
|
new_delay = dev_priv->rps.cur_delay + 1;
|
|
else
|
|
new_delay = dev_priv->rps.cur_delay - 1;
|
|
|
|
/* sysfs frequency interfaces may have snuck in while servicing the
|
|
* interrupt
|
|
*/
|
|
if (!(new_delay > dev_priv->rps.max_delay ||
|
|
new_delay < dev_priv->rps.min_delay)) {
|
|
gen6_set_rps(dev_priv->dev, new_delay);
|
|
}
|
|
|
|
mutex_unlock(&dev_priv->rps.hw_lock);
|
|
}
|
|
|
|
|
|
/**
|
|
* ivybridge_parity_work - Workqueue called when a parity error interrupt
|
|
* occurred.
|
|
* @work: workqueue struct
|
|
*
|
|
* Doesn't actually do anything except notify userspace. As a consequence of
|
|
* this event, userspace should try to remap the bad rows since statistically
|
|
* it is likely the same row is more likely to go bad again.
|
|
*/
|
|
static void ivybridge_parity_work(struct work_struct *work)
|
|
{
|
|
drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
|
|
l3_parity.error_work);
|
|
u32 error_status, row, bank, subbank;
|
|
char *parity_event[5];
|
|
uint32_t misccpctl;
|
|
unsigned long flags;
|
|
|
|
/* We must turn off DOP level clock gating to access the L3 registers.
|
|
* In order to prevent a get/put style interface, acquire struct mutex
|
|
* any time we access those registers.
|
|
*/
|
|
mutex_lock(&dev_priv->dev->struct_mutex);
|
|
|
|
misccpctl = I915_READ(GEN7_MISCCPCTL);
|
|
I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE);
|
|
POSTING_READ(GEN7_MISCCPCTL);
|
|
|
|
error_status = I915_READ(GEN7_L3CDERRST1);
|
|
row = GEN7_PARITY_ERROR_ROW(error_status);
|
|
bank = GEN7_PARITY_ERROR_BANK(error_status);
|
|
subbank = GEN7_PARITY_ERROR_SUBBANK(error_status);
|
|
|
|
I915_WRITE(GEN7_L3CDERRST1, GEN7_PARITY_ERROR_VALID |
|
|
GEN7_L3CDERRST1_ENABLE);
|
|
POSTING_READ(GEN7_L3CDERRST1);
|
|
|
|
I915_WRITE(GEN7_MISCCPCTL, misccpctl);
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, flags);
|
|
dev_priv->gt_irq_mask &= ~GT_GEN7_L3_PARITY_ERROR_INTERRUPT;
|
|
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
|
|
|
|
mutex_unlock(&dev_priv->dev->struct_mutex);
|
|
|
|
parity_event[0] = "L3_PARITY_ERROR=1";
|
|
parity_event[1] = kasprintf(GFP_KERNEL, "ROW=%d", row);
|
|
parity_event[2] = kasprintf(GFP_KERNEL, "BANK=%d", bank);
|
|
parity_event[3] = kasprintf(GFP_KERNEL, "SUBBANK=%d", subbank);
|
|
parity_event[4] = NULL;
|
|
|
|
kobject_uevent_env(&dev_priv->dev->primary->kdev.kobj,
|
|
KOBJ_CHANGE, parity_event);
|
|
|
|
DRM_DEBUG("Parity error: Row = %d, Bank = %d, Sub bank = %d.\n",
|
|
row, bank, subbank);
|
|
|
|
kfree(parity_event[3]);
|
|
kfree(parity_event[2]);
|
|
kfree(parity_event[1]);
|
|
}
|
|
|
|
static void ivybridge_handle_parity_error(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
unsigned long flags;
|
|
|
|
if (!HAS_L3_GPU_CACHE(dev))
|
|
return;
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, flags);
|
|
dev_priv->gt_irq_mask |= GT_GEN7_L3_PARITY_ERROR_INTERRUPT;
|
|
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
|
|
|
|
queue_work(dev_priv->wq, &dev_priv->l3_parity.error_work);
|
|
}
|
|
|
|
static void snb_gt_irq_handler(struct drm_device *dev,
|
|
struct drm_i915_private *dev_priv,
|
|
u32 gt_iir)
|
|
{
|
|
|
|
if (gt_iir & (GEN6_RENDER_USER_INTERRUPT |
|
|
GEN6_RENDER_PIPE_CONTROL_NOTIFY_INTERRUPT))
|
|
notify_ring(dev, &dev_priv->ring[RCS]);
|
|
if (gt_iir & GEN6_BSD_USER_INTERRUPT)
|
|
notify_ring(dev, &dev_priv->ring[VCS]);
|
|
if (gt_iir & GEN6_BLITTER_USER_INTERRUPT)
|
|
notify_ring(dev, &dev_priv->ring[BCS]);
|
|
|
|
if (gt_iir & (GT_GEN6_BLT_CS_ERROR_INTERRUPT |
|
|
GT_GEN6_BSD_CS_ERROR_INTERRUPT |
|
|
GT_RENDER_CS_ERROR_INTERRUPT)) {
|
|
DRM_ERROR("GT error interrupt 0x%08x\n", gt_iir);
|
|
i915_handle_error(dev, false);
|
|
}
|
|
|
|
if (gt_iir & GT_GEN7_L3_PARITY_ERROR_INTERRUPT)
|
|
ivybridge_handle_parity_error(dev);
|
|
}
|
|
|
|
static void gen6_queue_rps_work(struct drm_i915_private *dev_priv,
|
|
u32 pm_iir)
|
|
{
|
|
unsigned long flags;
|
|
|
|
/*
|
|
* IIR bits should never already be set because IMR should
|
|
* prevent an interrupt from being shown in IIR. The warning
|
|
* displays a case where we've unsafely cleared
|
|
* dev_priv->rps.pm_iir. Although missing an interrupt of the same
|
|
* type is not a problem, it displays a problem in the logic.
|
|
*
|
|
* The mask bit in IMR is cleared by dev_priv->rps.work.
|
|
*/
|
|
|
|
spin_lock_irqsave(&dev_priv->rps.lock, flags);
|
|
dev_priv->rps.pm_iir |= pm_iir;
|
|
I915_WRITE(GEN6_PMIMR, dev_priv->rps.pm_iir);
|
|
POSTING_READ(GEN6_PMIMR);
|
|
spin_unlock_irqrestore(&dev_priv->rps.lock, flags);
|
|
|
|
queue_work(dev_priv->wq, &dev_priv->rps.work);
|
|
}
|
|
|
|
static void gmbus_irq_handler(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
|
|
DRM_DEBUG_DRIVER("GMBUS interrupt\n");
|
|
|
|
wake_up_all(&dev_priv->gmbus_wait_queue);
|
|
}
|
|
|
|
static irqreturn_t valleyview_irq_handler(int irq, void *arg)
|
|
{
|
|
struct drm_device *dev = (struct drm_device *) arg;
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
u32 iir, gt_iir, pm_iir;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
unsigned long irqflags;
|
|
int pipe;
|
|
u32 pipe_stats[I915_MAX_PIPES];
|
|
|
|
atomic_inc(&dev_priv->irq_received);
|
|
|
|
while (true) {
|
|
iir = I915_READ(VLV_IIR);
|
|
gt_iir = I915_READ(GTIIR);
|
|
pm_iir = I915_READ(GEN6_PMIIR);
|
|
|
|
if (gt_iir == 0 && pm_iir == 0 && iir == 0)
|
|
goto out;
|
|
|
|
ret = IRQ_HANDLED;
|
|
|
|
snb_gt_irq_handler(dev, dev_priv, gt_iir);
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
for_each_pipe(pipe) {
|
|
int reg = PIPESTAT(pipe);
|
|
pipe_stats[pipe] = I915_READ(reg);
|
|
|
|
/*
|
|
* Clear the PIPE*STAT regs before the IIR
|
|
*/
|
|
if (pipe_stats[pipe] & 0x8000ffff) {
|
|
if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS)
|
|
DRM_DEBUG_DRIVER("pipe %c underrun\n",
|
|
pipe_name(pipe));
|
|
I915_WRITE(reg, pipe_stats[pipe]);
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
|
|
for_each_pipe(pipe) {
|
|
if (pipe_stats[pipe] & PIPE_VBLANK_INTERRUPT_STATUS)
|
|
drm_handle_vblank(dev, pipe);
|
|
|
|
if (pipe_stats[pipe] & PLANE_FLIPDONE_INT_STATUS_VLV) {
|
|
intel_prepare_page_flip(dev, pipe);
|
|
intel_finish_page_flip(dev, pipe);
|
|
}
|
|
}
|
|
|
|
/* Consume port. Then clear IIR or we'll miss events */
|
|
if (iir & I915_DISPLAY_PORT_INTERRUPT) {
|
|
u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
|
|
|
|
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
|
|
hotplug_status);
|
|
if (hotplug_status & dev_priv->hotplug_supported_mask)
|
|
queue_work(dev_priv->wq,
|
|
&dev_priv->hotplug_work);
|
|
|
|
I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
|
|
I915_READ(PORT_HOTPLUG_STAT);
|
|
}
|
|
|
|
if (pipe_stats[0] & PIPE_GMBUS_INTERRUPT_STATUS)
|
|
gmbus_irq_handler(dev);
|
|
|
|
if (pm_iir & GEN6_PM_DEFERRED_EVENTS)
|
|
gen6_queue_rps_work(dev_priv, pm_iir);
|
|
|
|
I915_WRITE(GTIIR, gt_iir);
|
|
I915_WRITE(GEN6_PMIIR, pm_iir);
|
|
I915_WRITE(VLV_IIR, iir);
|
|
}
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static void ibx_irq_handler(struct drm_device *dev, u32 pch_iir)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
int pipe;
|
|
|
|
if (pch_iir & SDE_HOTPLUG_MASK)
|
|
queue_work(dev_priv->wq, &dev_priv->hotplug_work);
|
|
|
|
if (pch_iir & SDE_AUDIO_POWER_MASK)
|
|
DRM_DEBUG_DRIVER("PCH audio power change on port %d\n",
|
|
(pch_iir & SDE_AUDIO_POWER_MASK) >>
|
|
SDE_AUDIO_POWER_SHIFT);
|
|
|
|
if (pch_iir & SDE_GMBUS)
|
|
gmbus_irq_handler(dev);
|
|
|
|
if (pch_iir & SDE_AUDIO_HDCP_MASK)
|
|
DRM_DEBUG_DRIVER("PCH HDCP audio interrupt\n");
|
|
|
|
if (pch_iir & SDE_AUDIO_TRANS_MASK)
|
|
DRM_DEBUG_DRIVER("PCH transcoder audio interrupt\n");
|
|
|
|
if (pch_iir & SDE_POISON)
|
|
DRM_ERROR("PCH poison interrupt\n");
|
|
|
|
if (pch_iir & SDE_FDI_MASK)
|
|
for_each_pipe(pipe)
|
|
DRM_DEBUG_DRIVER(" pipe %c FDI IIR: 0x%08x\n",
|
|
pipe_name(pipe),
|
|
I915_READ(FDI_RX_IIR(pipe)));
|
|
|
|
if (pch_iir & (SDE_TRANSB_CRC_DONE | SDE_TRANSA_CRC_DONE))
|
|
DRM_DEBUG_DRIVER("PCH transcoder CRC done interrupt\n");
|
|
|
|
if (pch_iir & (SDE_TRANSB_CRC_ERR | SDE_TRANSA_CRC_ERR))
|
|
DRM_DEBUG_DRIVER("PCH transcoder CRC error interrupt\n");
|
|
|
|
if (pch_iir & SDE_TRANSB_FIFO_UNDER)
|
|
DRM_DEBUG_DRIVER("PCH transcoder B underrun interrupt\n");
|
|
if (pch_iir & SDE_TRANSA_FIFO_UNDER)
|
|
DRM_DEBUG_DRIVER("PCH transcoder A underrun interrupt\n");
|
|
}
|
|
|
|
static void cpt_irq_handler(struct drm_device *dev, u32 pch_iir)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
int pipe;
|
|
|
|
if (pch_iir & SDE_HOTPLUG_MASK_CPT)
|
|
queue_work(dev_priv->wq, &dev_priv->hotplug_work);
|
|
|
|
if (pch_iir & SDE_AUDIO_POWER_MASK_CPT)
|
|
DRM_DEBUG_DRIVER("PCH audio power change on port %d\n",
|
|
(pch_iir & SDE_AUDIO_POWER_MASK_CPT) >>
|
|
SDE_AUDIO_POWER_SHIFT_CPT);
|
|
|
|
if (pch_iir & SDE_AUX_MASK_CPT)
|
|
DRM_DEBUG_DRIVER("AUX channel interrupt\n");
|
|
|
|
if (pch_iir & SDE_GMBUS_CPT)
|
|
gmbus_irq_handler(dev);
|
|
|
|
if (pch_iir & SDE_AUDIO_CP_REQ_CPT)
|
|
DRM_DEBUG_DRIVER("Audio CP request interrupt\n");
|
|
|
|
if (pch_iir & SDE_AUDIO_CP_CHG_CPT)
|
|
DRM_DEBUG_DRIVER("Audio CP change interrupt\n");
|
|
|
|
if (pch_iir & SDE_FDI_MASK_CPT)
|
|
for_each_pipe(pipe)
|
|
DRM_DEBUG_DRIVER(" pipe %c FDI IIR: 0x%08x\n",
|
|
pipe_name(pipe),
|
|
I915_READ(FDI_RX_IIR(pipe)));
|
|
}
|
|
|
|
static irqreturn_t ivybridge_irq_handler(int irq, void *arg)
|
|
{
|
|
struct drm_device *dev = (struct drm_device *) arg;
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
u32 de_iir, gt_iir, de_ier, pm_iir;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
int i;
|
|
|
|
atomic_inc(&dev_priv->irq_received);
|
|
|
|
/* disable master interrupt before clearing iir */
|
|
de_ier = I915_READ(DEIER);
|
|
I915_WRITE(DEIER, de_ier & ~DE_MASTER_IRQ_CONTROL);
|
|
|
|
gt_iir = I915_READ(GTIIR);
|
|
if (gt_iir) {
|
|
snb_gt_irq_handler(dev, dev_priv, gt_iir);
|
|
I915_WRITE(GTIIR, gt_iir);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
de_iir = I915_READ(DEIIR);
|
|
if (de_iir) {
|
|
if (de_iir & DE_GSE_IVB)
|
|
intel_opregion_gse_intr(dev);
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
if (de_iir & (DE_PIPEA_VBLANK_IVB << (5 * i)))
|
|
drm_handle_vblank(dev, i);
|
|
if (de_iir & (DE_PLANEA_FLIP_DONE_IVB << (5 * i))) {
|
|
intel_prepare_page_flip(dev, i);
|
|
intel_finish_page_flip_plane(dev, i);
|
|
}
|
|
}
|
|
|
|
/* check event from PCH */
|
|
if (de_iir & DE_PCH_EVENT_IVB) {
|
|
u32 pch_iir = I915_READ(SDEIIR);
|
|
|
|
cpt_irq_handler(dev, pch_iir);
|
|
|
|
/* clear PCH hotplug event before clear CPU irq */
|
|
I915_WRITE(SDEIIR, pch_iir);
|
|
}
|
|
|
|
I915_WRITE(DEIIR, de_iir);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
pm_iir = I915_READ(GEN6_PMIIR);
|
|
if (pm_iir) {
|
|
if (pm_iir & GEN6_PM_DEFERRED_EVENTS)
|
|
gen6_queue_rps_work(dev_priv, pm_iir);
|
|
I915_WRITE(GEN6_PMIIR, pm_iir);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
I915_WRITE(DEIER, de_ier);
|
|
POSTING_READ(DEIER);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ilk_gt_irq_handler(struct drm_device *dev,
|
|
struct drm_i915_private *dev_priv,
|
|
u32 gt_iir)
|
|
{
|
|
if (gt_iir & (GT_USER_INTERRUPT | GT_PIPE_NOTIFY))
|
|
notify_ring(dev, &dev_priv->ring[RCS]);
|
|
if (gt_iir & GT_BSD_USER_INTERRUPT)
|
|
notify_ring(dev, &dev_priv->ring[VCS]);
|
|
}
|
|
|
|
static irqreturn_t ironlake_irq_handler(int irq, void *arg)
|
|
{
|
|
struct drm_device *dev = (struct drm_device *) arg;
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
int ret = IRQ_NONE;
|
|
u32 de_iir, gt_iir, de_ier, pm_iir;
|
|
|
|
atomic_inc(&dev_priv->irq_received);
|
|
|
|
/* disable master interrupt before clearing iir */
|
|
de_ier = I915_READ(DEIER);
|
|
I915_WRITE(DEIER, de_ier & ~DE_MASTER_IRQ_CONTROL);
|
|
POSTING_READ(DEIER);
|
|
|
|
de_iir = I915_READ(DEIIR);
|
|
gt_iir = I915_READ(GTIIR);
|
|
pm_iir = I915_READ(GEN6_PMIIR);
|
|
|
|
if (de_iir == 0 && gt_iir == 0 && (!IS_GEN6(dev) || pm_iir == 0))
|
|
goto done;
|
|
|
|
ret = IRQ_HANDLED;
|
|
|
|
if (IS_GEN5(dev))
|
|
ilk_gt_irq_handler(dev, dev_priv, gt_iir);
|
|
else
|
|
snb_gt_irq_handler(dev, dev_priv, gt_iir);
|
|
|
|
if (de_iir & DE_GSE)
|
|
intel_opregion_gse_intr(dev);
|
|
|
|
if (de_iir & DE_PIPEA_VBLANK)
|
|
drm_handle_vblank(dev, 0);
|
|
|
|
if (de_iir & DE_PIPEB_VBLANK)
|
|
drm_handle_vblank(dev, 1);
|
|
|
|
if (de_iir & DE_PLANEA_FLIP_DONE) {
|
|
intel_prepare_page_flip(dev, 0);
|
|
intel_finish_page_flip_plane(dev, 0);
|
|
}
|
|
|
|
if (de_iir & DE_PLANEB_FLIP_DONE) {
|
|
intel_prepare_page_flip(dev, 1);
|
|
intel_finish_page_flip_plane(dev, 1);
|
|
}
|
|
|
|
/* check event from PCH */
|
|
if (de_iir & DE_PCH_EVENT) {
|
|
u32 pch_iir = I915_READ(SDEIIR);
|
|
|
|
if (HAS_PCH_CPT(dev))
|
|
cpt_irq_handler(dev, pch_iir);
|
|
else
|
|
ibx_irq_handler(dev, pch_iir);
|
|
|
|
/* should clear PCH hotplug event before clear CPU irq */
|
|
I915_WRITE(SDEIIR, pch_iir);
|
|
}
|
|
|
|
if (IS_GEN5(dev) && de_iir & DE_PCU_EVENT)
|
|
ironlake_handle_rps_change(dev);
|
|
|
|
if (IS_GEN6(dev) && pm_iir & GEN6_PM_DEFERRED_EVENTS)
|
|
gen6_queue_rps_work(dev_priv, pm_iir);
|
|
|
|
I915_WRITE(GTIIR, gt_iir);
|
|
I915_WRITE(DEIIR, de_iir);
|
|
I915_WRITE(GEN6_PMIIR, pm_iir);
|
|
|
|
done:
|
|
I915_WRITE(DEIER, de_ier);
|
|
POSTING_READ(DEIER);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* i915_error_work_func - do process context error handling work
|
|
* @work: work struct
|
|
*
|
|
* Fire an error uevent so userspace can see that a hang or error
|
|
* was detected.
|
|
*/
|
|
static void i915_error_work_func(struct work_struct *work)
|
|
{
|
|
drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
|
|
error_work);
|
|
struct drm_device *dev = dev_priv->dev;
|
|
char *error_event[] = { "ERROR=1", NULL };
|
|
char *reset_event[] = { "RESET=1", NULL };
|
|
char *reset_done_event[] = { "ERROR=0", NULL };
|
|
|
|
kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, error_event);
|
|
|
|
if (atomic_read(&dev_priv->mm.wedged)) {
|
|
DRM_DEBUG_DRIVER("resetting chip\n");
|
|
kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, reset_event);
|
|
if (!i915_reset(dev)) {
|
|
atomic_set(&dev_priv->mm.wedged, 0);
|
|
kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, reset_done_event);
|
|
}
|
|
complete_all(&dev_priv->error_completion);
|
|
}
|
|
}
|
|
|
|
/* NB: please notice the memset */
|
|
static void i915_get_extra_instdone(struct drm_device *dev,
|
|
uint32_t *instdone)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
memset(instdone, 0, sizeof(*instdone) * I915_NUM_INSTDONE_REG);
|
|
|
|
switch(INTEL_INFO(dev)->gen) {
|
|
case 2:
|
|
case 3:
|
|
instdone[0] = I915_READ(INSTDONE);
|
|
break;
|
|
case 4:
|
|
case 5:
|
|
case 6:
|
|
instdone[0] = I915_READ(INSTDONE_I965);
|
|
instdone[1] = I915_READ(INSTDONE1);
|
|
break;
|
|
default:
|
|
WARN_ONCE(1, "Unsupported platform\n");
|
|
case 7:
|
|
instdone[0] = I915_READ(GEN7_INSTDONE_1);
|
|
instdone[1] = I915_READ(GEN7_SC_INSTDONE);
|
|
instdone[2] = I915_READ(GEN7_SAMPLER_INSTDONE);
|
|
instdone[3] = I915_READ(GEN7_ROW_INSTDONE);
|
|
break;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
static struct drm_i915_error_object *
|
|
i915_error_object_create(struct drm_i915_private *dev_priv,
|
|
struct drm_i915_gem_object *src)
|
|
{
|
|
struct drm_i915_error_object *dst;
|
|
int i, count;
|
|
u32 reloc_offset;
|
|
|
|
if (src == NULL || src->pages == NULL)
|
|
return NULL;
|
|
|
|
count = src->base.size / PAGE_SIZE;
|
|
|
|
dst = kmalloc(sizeof(*dst) + count * sizeof(u32 *), GFP_ATOMIC);
|
|
if (dst == NULL)
|
|
return NULL;
|
|
|
|
reloc_offset = src->gtt_offset;
|
|
for (i = 0; i < count; i++) {
|
|
unsigned long flags;
|
|
void *d;
|
|
|
|
d = kmalloc(PAGE_SIZE, GFP_ATOMIC);
|
|
if (d == NULL)
|
|
goto unwind;
|
|
|
|
local_irq_save(flags);
|
|
if (reloc_offset < dev_priv->mm.gtt_mappable_end &&
|
|
src->has_global_gtt_mapping) {
|
|
void __iomem *s;
|
|
|
|
/* Simply ignore tiling or any overlapping fence.
|
|
* It's part of the error state, and this hopefully
|
|
* captures what the GPU read.
|
|
*/
|
|
|
|
s = io_mapping_map_atomic_wc(dev_priv->mm.gtt_mapping,
|
|
reloc_offset);
|
|
memcpy_fromio(d, s, PAGE_SIZE);
|
|
io_mapping_unmap_atomic(s);
|
|
} else if (src->stolen) {
|
|
unsigned long offset;
|
|
|
|
offset = dev_priv->mm.stolen_base;
|
|
offset += src->stolen->start;
|
|
offset += i << PAGE_SHIFT;
|
|
|
|
memcpy_fromio(d, (void __iomem *) offset, PAGE_SIZE);
|
|
} else {
|
|
struct page *page;
|
|
void *s;
|
|
|
|
page = i915_gem_object_get_page(src, i);
|
|
|
|
drm_clflush_pages(&page, 1);
|
|
|
|
s = kmap_atomic(page);
|
|
memcpy(d, s, PAGE_SIZE);
|
|
kunmap_atomic(s);
|
|
|
|
drm_clflush_pages(&page, 1);
|
|
}
|
|
local_irq_restore(flags);
|
|
|
|
dst->pages[i] = d;
|
|
|
|
reloc_offset += PAGE_SIZE;
|
|
}
|
|
dst->page_count = count;
|
|
dst->gtt_offset = src->gtt_offset;
|
|
|
|
return dst;
|
|
|
|
unwind:
|
|
while (i--)
|
|
kfree(dst->pages[i]);
|
|
kfree(dst);
|
|
return NULL;
|
|
}
|
|
|
|
static void
|
|
i915_error_object_free(struct drm_i915_error_object *obj)
|
|
{
|
|
int page;
|
|
|
|
if (obj == NULL)
|
|
return;
|
|
|
|
for (page = 0; page < obj->page_count; page++)
|
|
kfree(obj->pages[page]);
|
|
|
|
kfree(obj);
|
|
}
|
|
|
|
void
|
|
i915_error_state_free(struct kref *error_ref)
|
|
{
|
|
struct drm_i915_error_state *error = container_of(error_ref,
|
|
typeof(*error), ref);
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(error->ring); i++) {
|
|
i915_error_object_free(error->ring[i].batchbuffer);
|
|
i915_error_object_free(error->ring[i].ringbuffer);
|
|
kfree(error->ring[i].requests);
|
|
}
|
|
|
|
kfree(error->active_bo);
|
|
kfree(error->overlay);
|
|
kfree(error);
|
|
}
|
|
static void capture_bo(struct drm_i915_error_buffer *err,
|
|
struct drm_i915_gem_object *obj)
|
|
{
|
|
err->size = obj->base.size;
|
|
err->name = obj->base.name;
|
|
err->rseqno = obj->last_read_seqno;
|
|
err->wseqno = obj->last_write_seqno;
|
|
err->gtt_offset = obj->gtt_offset;
|
|
err->read_domains = obj->base.read_domains;
|
|
err->write_domain = obj->base.write_domain;
|
|
err->fence_reg = obj->fence_reg;
|
|
err->pinned = 0;
|
|
if (obj->pin_count > 0)
|
|
err->pinned = 1;
|
|
if (obj->user_pin_count > 0)
|
|
err->pinned = -1;
|
|
err->tiling = obj->tiling_mode;
|
|
err->dirty = obj->dirty;
|
|
err->purgeable = obj->madv != I915_MADV_WILLNEED;
|
|
err->ring = obj->ring ? obj->ring->id : -1;
|
|
err->cache_level = obj->cache_level;
|
|
}
|
|
|
|
static u32 capture_active_bo(struct drm_i915_error_buffer *err,
|
|
int count, struct list_head *head)
|
|
{
|
|
struct drm_i915_gem_object *obj;
|
|
int i = 0;
|
|
|
|
list_for_each_entry(obj, head, mm_list) {
|
|
capture_bo(err++, obj);
|
|
if (++i == count)
|
|
break;
|
|
}
|
|
|
|
return i;
|
|
}
|
|
|
|
static u32 capture_pinned_bo(struct drm_i915_error_buffer *err,
|
|
int count, struct list_head *head)
|
|
{
|
|
struct drm_i915_gem_object *obj;
|
|
int i = 0;
|
|
|
|
list_for_each_entry(obj, head, gtt_list) {
|
|
if (obj->pin_count == 0)
|
|
continue;
|
|
|
|
capture_bo(err++, obj);
|
|
if (++i == count)
|
|
break;
|
|
}
|
|
|
|
return i;
|
|
}
|
|
|
|
static void i915_gem_record_fences(struct drm_device *dev,
|
|
struct drm_i915_error_state *error)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int i;
|
|
|
|
/* Fences */
|
|
switch (INTEL_INFO(dev)->gen) {
|
|
case 7:
|
|
case 6:
|
|
for (i = 0; i < 16; i++)
|
|
error->fence[i] = I915_READ64(FENCE_REG_SANDYBRIDGE_0 + (i * 8));
|
|
break;
|
|
case 5:
|
|
case 4:
|
|
for (i = 0; i < 16; i++)
|
|
error->fence[i] = I915_READ64(FENCE_REG_965_0 + (i * 8));
|
|
break;
|
|
case 3:
|
|
if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
|
|
for (i = 0; i < 8; i++)
|
|
error->fence[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4));
|
|
case 2:
|
|
for (i = 0; i < 8; i++)
|
|
error->fence[i] = I915_READ(FENCE_REG_830_0 + (i * 4));
|
|
break;
|
|
|
|
}
|
|
}
|
|
|
|
static struct drm_i915_error_object *
|
|
i915_error_first_batchbuffer(struct drm_i915_private *dev_priv,
|
|
struct intel_ring_buffer *ring)
|
|
{
|
|
struct drm_i915_gem_object *obj;
|
|
u32 seqno;
|
|
|
|
if (!ring->get_seqno)
|
|
return NULL;
|
|
|
|
seqno = ring->get_seqno(ring, false);
|
|
list_for_each_entry(obj, &dev_priv->mm.active_list, mm_list) {
|
|
if (obj->ring != ring)
|
|
continue;
|
|
|
|
if (i915_seqno_passed(seqno, obj->last_read_seqno))
|
|
continue;
|
|
|
|
if ((obj->base.read_domains & I915_GEM_DOMAIN_COMMAND) == 0)
|
|
continue;
|
|
|
|
/* We need to copy these to an anonymous buffer as the simplest
|
|
* method to avoid being overwritten by userspace.
|
|
*/
|
|
return i915_error_object_create(dev_priv, obj);
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static void i915_record_ring_state(struct drm_device *dev,
|
|
struct drm_i915_error_state *error,
|
|
struct intel_ring_buffer *ring)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (INTEL_INFO(dev)->gen >= 6) {
|
|
error->rc_psmi[ring->id] = I915_READ(ring->mmio_base + 0x50);
|
|
error->fault_reg[ring->id] = I915_READ(RING_FAULT_REG(ring));
|
|
error->semaphore_mboxes[ring->id][0]
|
|
= I915_READ(RING_SYNC_0(ring->mmio_base));
|
|
error->semaphore_mboxes[ring->id][1]
|
|
= I915_READ(RING_SYNC_1(ring->mmio_base));
|
|
error->semaphore_seqno[ring->id][0] = ring->sync_seqno[0];
|
|
error->semaphore_seqno[ring->id][1] = ring->sync_seqno[1];
|
|
}
|
|
|
|
if (INTEL_INFO(dev)->gen >= 4) {
|
|
error->faddr[ring->id] = I915_READ(RING_DMA_FADD(ring->mmio_base));
|
|
error->ipeir[ring->id] = I915_READ(RING_IPEIR(ring->mmio_base));
|
|
error->ipehr[ring->id] = I915_READ(RING_IPEHR(ring->mmio_base));
|
|
error->instdone[ring->id] = I915_READ(RING_INSTDONE(ring->mmio_base));
|
|
error->instps[ring->id] = I915_READ(RING_INSTPS(ring->mmio_base));
|
|
if (ring->id == RCS)
|
|
error->bbaddr = I915_READ64(BB_ADDR);
|
|
} else {
|
|
error->faddr[ring->id] = I915_READ(DMA_FADD_I8XX);
|
|
error->ipeir[ring->id] = I915_READ(IPEIR);
|
|
error->ipehr[ring->id] = I915_READ(IPEHR);
|
|
error->instdone[ring->id] = I915_READ(INSTDONE);
|
|
}
|
|
|
|
error->waiting[ring->id] = waitqueue_active(&ring->irq_queue);
|
|
error->instpm[ring->id] = I915_READ(RING_INSTPM(ring->mmio_base));
|
|
error->seqno[ring->id] = ring->get_seqno(ring, false);
|
|
error->acthd[ring->id] = intel_ring_get_active_head(ring);
|
|
error->head[ring->id] = I915_READ_HEAD(ring);
|
|
error->tail[ring->id] = I915_READ_TAIL(ring);
|
|
|
|
error->cpu_ring_head[ring->id] = ring->head;
|
|
error->cpu_ring_tail[ring->id] = ring->tail;
|
|
}
|
|
|
|
static void i915_gem_record_rings(struct drm_device *dev,
|
|
struct drm_i915_error_state *error)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_ring_buffer *ring;
|
|
struct drm_i915_gem_request *request;
|
|
int i, count;
|
|
|
|
for_each_ring(ring, dev_priv, i) {
|
|
i915_record_ring_state(dev, error, ring);
|
|
|
|
error->ring[i].batchbuffer =
|
|
i915_error_first_batchbuffer(dev_priv, ring);
|
|
|
|
error->ring[i].ringbuffer =
|
|
i915_error_object_create(dev_priv, ring->obj);
|
|
|
|
count = 0;
|
|
list_for_each_entry(request, &ring->request_list, list)
|
|
count++;
|
|
|
|
error->ring[i].num_requests = count;
|
|
error->ring[i].requests =
|
|
kmalloc(count*sizeof(struct drm_i915_error_request),
|
|
GFP_ATOMIC);
|
|
if (error->ring[i].requests == NULL) {
|
|
error->ring[i].num_requests = 0;
|
|
continue;
|
|
}
|
|
|
|
count = 0;
|
|
list_for_each_entry(request, &ring->request_list, list) {
|
|
struct drm_i915_error_request *erq;
|
|
|
|
erq = &error->ring[i].requests[count++];
|
|
erq->seqno = request->seqno;
|
|
erq->jiffies = request->emitted_jiffies;
|
|
erq->tail = request->tail;
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i915_capture_error_state - capture an error record for later analysis
|
|
* @dev: drm device
|
|
*
|
|
* Should be called when an error is detected (either a hang or an error
|
|
* interrupt) to capture error state from the time of the error. Fills
|
|
* out a structure which becomes available in debugfs for user level tools
|
|
* to pick up.
|
|
*/
|
|
static void i915_capture_error_state(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_i915_gem_object *obj;
|
|
struct drm_i915_error_state *error;
|
|
unsigned long flags;
|
|
int i, pipe;
|
|
|
|
spin_lock_irqsave(&dev_priv->error_lock, flags);
|
|
error = dev_priv->first_error;
|
|
spin_unlock_irqrestore(&dev_priv->error_lock, flags);
|
|
if (error)
|
|
return;
|
|
|
|
/* Account for pipe specific data like PIPE*STAT */
|
|
error = kzalloc(sizeof(*error), GFP_ATOMIC);
|
|
if (!error) {
|
|
DRM_DEBUG_DRIVER("out of memory, not capturing error state\n");
|
|
return;
|
|
}
|
|
|
|
DRM_INFO("capturing error event; look for more information in /debug/dri/%d/i915_error_state\n",
|
|
dev->primary->index);
|
|
|
|
kref_init(&error->ref);
|
|
error->eir = I915_READ(EIR);
|
|
error->pgtbl_er = I915_READ(PGTBL_ER);
|
|
error->ccid = I915_READ(CCID);
|
|
|
|
if (HAS_PCH_SPLIT(dev))
|
|
error->ier = I915_READ(DEIER) | I915_READ(GTIER);
|
|
else if (IS_VALLEYVIEW(dev))
|
|
error->ier = I915_READ(GTIER) | I915_READ(VLV_IER);
|
|
else if (IS_GEN2(dev))
|
|
error->ier = I915_READ16(IER);
|
|
else
|
|
error->ier = I915_READ(IER);
|
|
|
|
for_each_pipe(pipe)
|
|
error->pipestat[pipe] = I915_READ(PIPESTAT(pipe));
|
|
|
|
if (INTEL_INFO(dev)->gen >= 6) {
|
|
error->error = I915_READ(ERROR_GEN6);
|
|
error->done_reg = I915_READ(DONE_REG);
|
|
}
|
|
|
|
if (INTEL_INFO(dev)->gen == 7)
|
|
error->err_int = I915_READ(GEN7_ERR_INT);
|
|
|
|
i915_get_extra_instdone(dev, error->extra_instdone);
|
|
|
|
i915_gem_record_fences(dev, error);
|
|
i915_gem_record_rings(dev, error);
|
|
|
|
/* Record buffers on the active and pinned lists. */
|
|
error->active_bo = NULL;
|
|
error->pinned_bo = NULL;
|
|
|
|
i = 0;
|
|
list_for_each_entry(obj, &dev_priv->mm.active_list, mm_list)
|
|
i++;
|
|
error->active_bo_count = i;
|
|
list_for_each_entry(obj, &dev_priv->mm.bound_list, gtt_list)
|
|
if (obj->pin_count)
|
|
i++;
|
|
error->pinned_bo_count = i - error->active_bo_count;
|
|
|
|
error->active_bo = NULL;
|
|
error->pinned_bo = NULL;
|
|
if (i) {
|
|
error->active_bo = kmalloc(sizeof(*error->active_bo)*i,
|
|
GFP_ATOMIC);
|
|
if (error->active_bo)
|
|
error->pinned_bo =
|
|
error->active_bo + error->active_bo_count;
|
|
}
|
|
|
|
if (error->active_bo)
|
|
error->active_bo_count =
|
|
capture_active_bo(error->active_bo,
|
|
error->active_bo_count,
|
|
&dev_priv->mm.active_list);
|
|
|
|
if (error->pinned_bo)
|
|
error->pinned_bo_count =
|
|
capture_pinned_bo(error->pinned_bo,
|
|
error->pinned_bo_count,
|
|
&dev_priv->mm.bound_list);
|
|
|
|
do_gettimeofday(&error->time);
|
|
|
|
error->overlay = intel_overlay_capture_error_state(dev);
|
|
error->display = intel_display_capture_error_state(dev);
|
|
|
|
spin_lock_irqsave(&dev_priv->error_lock, flags);
|
|
if (dev_priv->first_error == NULL) {
|
|
dev_priv->first_error = error;
|
|
error = NULL;
|
|
}
|
|
spin_unlock_irqrestore(&dev_priv->error_lock, flags);
|
|
|
|
if (error)
|
|
i915_error_state_free(&error->ref);
|
|
}
|
|
|
|
void i915_destroy_error_state(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct drm_i915_error_state *error;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&dev_priv->error_lock, flags);
|
|
error = dev_priv->first_error;
|
|
dev_priv->first_error = NULL;
|
|
spin_unlock_irqrestore(&dev_priv->error_lock, flags);
|
|
|
|
if (error)
|
|
kref_put(&error->ref, i915_error_state_free);
|
|
}
|
|
#else
|
|
#define i915_capture_error_state(x)
|
|
#endif
|
|
|
|
static void i915_report_and_clear_eir(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
uint32_t instdone[I915_NUM_INSTDONE_REG];
|
|
u32 eir = I915_READ(EIR);
|
|
int pipe, i;
|
|
|
|
if (!eir)
|
|
return;
|
|
|
|
pr_err("render error detected, EIR: 0x%08x\n", eir);
|
|
|
|
i915_get_extra_instdone(dev, instdone);
|
|
|
|
if (IS_G4X(dev)) {
|
|
if (eir & (GM45_ERROR_MEM_PRIV | GM45_ERROR_CP_PRIV)) {
|
|
u32 ipeir = I915_READ(IPEIR_I965);
|
|
|
|
pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR_I965));
|
|
pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR_I965));
|
|
for (i = 0; i < ARRAY_SIZE(instdone); i++)
|
|
pr_err(" INSTDONE_%d: 0x%08x\n", i, instdone[i]);
|
|
pr_err(" INSTPS: 0x%08x\n", I915_READ(INSTPS));
|
|
pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD_I965));
|
|
I915_WRITE(IPEIR_I965, ipeir);
|
|
POSTING_READ(IPEIR_I965);
|
|
}
|
|
if (eir & GM45_ERROR_PAGE_TABLE) {
|
|
u32 pgtbl_err = I915_READ(PGTBL_ER);
|
|
pr_err("page table error\n");
|
|
pr_err(" PGTBL_ER: 0x%08x\n", pgtbl_err);
|
|
I915_WRITE(PGTBL_ER, pgtbl_err);
|
|
POSTING_READ(PGTBL_ER);
|
|
}
|
|
}
|
|
|
|
if (!IS_GEN2(dev)) {
|
|
if (eir & I915_ERROR_PAGE_TABLE) {
|
|
u32 pgtbl_err = I915_READ(PGTBL_ER);
|
|
pr_err("page table error\n");
|
|
pr_err(" PGTBL_ER: 0x%08x\n", pgtbl_err);
|
|
I915_WRITE(PGTBL_ER, pgtbl_err);
|
|
POSTING_READ(PGTBL_ER);
|
|
}
|
|
}
|
|
|
|
if (eir & I915_ERROR_MEMORY_REFRESH) {
|
|
pr_err("memory refresh error:\n");
|
|
for_each_pipe(pipe)
|
|
pr_err("pipe %c stat: 0x%08x\n",
|
|
pipe_name(pipe), I915_READ(PIPESTAT(pipe)));
|
|
/* pipestat has already been acked */
|
|
}
|
|
if (eir & I915_ERROR_INSTRUCTION) {
|
|
pr_err("instruction error\n");
|
|
pr_err(" INSTPM: 0x%08x\n", I915_READ(INSTPM));
|
|
for (i = 0; i < ARRAY_SIZE(instdone); i++)
|
|
pr_err(" INSTDONE_%d: 0x%08x\n", i, instdone[i]);
|
|
if (INTEL_INFO(dev)->gen < 4) {
|
|
u32 ipeir = I915_READ(IPEIR);
|
|
|
|
pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR));
|
|
pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR));
|
|
pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD));
|
|
I915_WRITE(IPEIR, ipeir);
|
|
POSTING_READ(IPEIR);
|
|
} else {
|
|
u32 ipeir = I915_READ(IPEIR_I965);
|
|
|
|
pr_err(" IPEIR: 0x%08x\n", I915_READ(IPEIR_I965));
|
|
pr_err(" IPEHR: 0x%08x\n", I915_READ(IPEHR_I965));
|
|
pr_err(" INSTPS: 0x%08x\n", I915_READ(INSTPS));
|
|
pr_err(" ACTHD: 0x%08x\n", I915_READ(ACTHD_I965));
|
|
I915_WRITE(IPEIR_I965, ipeir);
|
|
POSTING_READ(IPEIR_I965);
|
|
}
|
|
}
|
|
|
|
I915_WRITE(EIR, eir);
|
|
POSTING_READ(EIR);
|
|
eir = I915_READ(EIR);
|
|
if (eir) {
|
|
/*
|
|
* some errors might have become stuck,
|
|
* mask them.
|
|
*/
|
|
DRM_ERROR("EIR stuck: 0x%08x, masking\n", eir);
|
|
I915_WRITE(EMR, I915_READ(EMR) | eir);
|
|
I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i915_handle_error - handle an error interrupt
|
|
* @dev: drm device
|
|
*
|
|
* Do some basic checking of regsiter state at error interrupt time and
|
|
* dump it to the syslog. Also call i915_capture_error_state() to make
|
|
* sure we get a record and make it available in debugfs. Fire a uevent
|
|
* so userspace knows something bad happened (should trigger collection
|
|
* of a ring dump etc.).
|
|
*/
|
|
void i915_handle_error(struct drm_device *dev, bool wedged)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct intel_ring_buffer *ring;
|
|
int i;
|
|
|
|
i915_capture_error_state(dev);
|
|
i915_report_and_clear_eir(dev);
|
|
|
|
if (wedged) {
|
|
INIT_COMPLETION(dev_priv->error_completion);
|
|
atomic_set(&dev_priv->mm.wedged, 1);
|
|
|
|
/*
|
|
* Wakeup waiting processes so they don't hang
|
|
*/
|
|
for_each_ring(ring, dev_priv, i)
|
|
wake_up_all(&ring->irq_queue);
|
|
}
|
|
|
|
queue_work(dev_priv->wq, &dev_priv->error_work);
|
|
}
|
|
|
|
static void i915_pageflip_stall_check(struct drm_device *dev, int pipe)
|
|
{
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
|
struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
|
struct drm_i915_gem_object *obj;
|
|
struct intel_unpin_work *work;
|
|
unsigned long flags;
|
|
bool stall_detected;
|
|
|
|
/* Ignore early vblank irqs */
|
|
if (intel_crtc == NULL)
|
|
return;
|
|
|
|
spin_lock_irqsave(&dev->event_lock, flags);
|
|
work = intel_crtc->unpin_work;
|
|
|
|
if (work == NULL || work->pending || !work->enable_stall_check) {
|
|
/* Either the pending flip IRQ arrived, or we're too early. Don't check */
|
|
spin_unlock_irqrestore(&dev->event_lock, flags);
|
|
return;
|
|
}
|
|
|
|
/* Potential stall - if we see that the flip has happened, assume a missed interrupt */
|
|
obj = work->pending_flip_obj;
|
|
if (INTEL_INFO(dev)->gen >= 4) {
|
|
int dspsurf = DSPSURF(intel_crtc->plane);
|
|
stall_detected = I915_HI_DISPBASE(I915_READ(dspsurf)) ==
|
|
obj->gtt_offset;
|
|
} else {
|
|
int dspaddr = DSPADDR(intel_crtc->plane);
|
|
stall_detected = I915_READ(dspaddr) == (obj->gtt_offset +
|
|
crtc->y * crtc->fb->pitches[0] +
|
|
crtc->x * crtc->fb->bits_per_pixel/8);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&dev->event_lock, flags);
|
|
|
|
if (stall_detected) {
|
|
DRM_DEBUG_DRIVER("Pageflip stall detected\n");
|
|
intel_prepare_page_flip(dev, intel_crtc->plane);
|
|
}
|
|
}
|
|
|
|
/* Called from drm generic code, passed 'crtc' which
|
|
* we use as a pipe index
|
|
*/
|
|
static int i915_enable_vblank(struct drm_device *dev, int pipe)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
unsigned long irqflags;
|
|
|
|
if (!i915_pipe_enabled(dev, pipe))
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
if (INTEL_INFO(dev)->gen >= 4)
|
|
i915_enable_pipestat(dev_priv, pipe,
|
|
PIPE_START_VBLANK_INTERRUPT_ENABLE);
|
|
else
|
|
i915_enable_pipestat(dev_priv, pipe,
|
|
PIPE_VBLANK_INTERRUPT_ENABLE);
|
|
|
|
/* maintain vblank delivery even in deep C-states */
|
|
if (dev_priv->info->gen == 3)
|
|
I915_WRITE(INSTPM, _MASKED_BIT_DISABLE(INSTPM_AGPBUSY_DIS));
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ironlake_enable_vblank(struct drm_device *dev, int pipe)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
unsigned long irqflags;
|
|
|
|
if (!i915_pipe_enabled(dev, pipe))
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
ironlake_enable_display_irq(dev_priv, (pipe == 0) ?
|
|
DE_PIPEA_VBLANK : DE_PIPEB_VBLANK);
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ivybridge_enable_vblank(struct drm_device *dev, int pipe)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
unsigned long irqflags;
|
|
|
|
if (!i915_pipe_enabled(dev, pipe))
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
ironlake_enable_display_irq(dev_priv,
|
|
DE_PIPEA_VBLANK_IVB << (5 * pipe));
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int valleyview_enable_vblank(struct drm_device *dev, int pipe)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
unsigned long irqflags;
|
|
u32 imr;
|
|
|
|
if (!i915_pipe_enabled(dev, pipe))
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
imr = I915_READ(VLV_IMR);
|
|
if (pipe == 0)
|
|
imr &= ~I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT;
|
|
else
|
|
imr &= ~I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
|
|
I915_WRITE(VLV_IMR, imr);
|
|
i915_enable_pipestat(dev_priv, pipe,
|
|
PIPE_START_VBLANK_INTERRUPT_ENABLE);
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Called from drm generic code, passed 'crtc' which
|
|
* we use as a pipe index
|
|
*/
|
|
static void i915_disable_vblank(struct drm_device *dev, int pipe)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
unsigned long irqflags;
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
if (dev_priv->info->gen == 3)
|
|
I915_WRITE(INSTPM, _MASKED_BIT_ENABLE(INSTPM_AGPBUSY_DIS));
|
|
|
|
i915_disable_pipestat(dev_priv, pipe,
|
|
PIPE_VBLANK_INTERRUPT_ENABLE |
|
|
PIPE_START_VBLANK_INTERRUPT_ENABLE);
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
}
|
|
|
|
static void ironlake_disable_vblank(struct drm_device *dev, int pipe)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
unsigned long irqflags;
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
ironlake_disable_display_irq(dev_priv, (pipe == 0) ?
|
|
DE_PIPEA_VBLANK : DE_PIPEB_VBLANK);
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
}
|
|
|
|
static void ivybridge_disable_vblank(struct drm_device *dev, int pipe)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
unsigned long irqflags;
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
ironlake_disable_display_irq(dev_priv,
|
|
DE_PIPEA_VBLANK_IVB << (pipe * 5));
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
}
|
|
|
|
static void valleyview_disable_vblank(struct drm_device *dev, int pipe)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
unsigned long irqflags;
|
|
u32 imr;
|
|
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
i915_disable_pipestat(dev_priv, pipe,
|
|
PIPE_START_VBLANK_INTERRUPT_ENABLE);
|
|
imr = I915_READ(VLV_IMR);
|
|
if (pipe == 0)
|
|
imr |= I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT;
|
|
else
|
|
imr |= I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
|
|
I915_WRITE(VLV_IMR, imr);
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
}
|
|
|
|
static u32
|
|
ring_last_seqno(struct intel_ring_buffer *ring)
|
|
{
|
|
return list_entry(ring->request_list.prev,
|
|
struct drm_i915_gem_request, list)->seqno;
|
|
}
|
|
|
|
static bool i915_hangcheck_ring_idle(struct intel_ring_buffer *ring, bool *err)
|
|
{
|
|
if (list_empty(&ring->request_list) ||
|
|
i915_seqno_passed(ring->get_seqno(ring, false),
|
|
ring_last_seqno(ring))) {
|
|
/* Issue a wake-up to catch stuck h/w. */
|
|
if (waitqueue_active(&ring->irq_queue)) {
|
|
DRM_ERROR("Hangcheck timer elapsed... %s idle\n",
|
|
ring->name);
|
|
wake_up_all(&ring->irq_queue);
|
|
*err = true;
|
|
}
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static bool kick_ring(struct intel_ring_buffer *ring)
|
|
{
|
|
struct drm_device *dev = ring->dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 tmp = I915_READ_CTL(ring);
|
|
if (tmp & RING_WAIT) {
|
|
DRM_ERROR("Kicking stuck wait on %s\n",
|
|
ring->name);
|
|
I915_WRITE_CTL(ring, tmp);
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static bool i915_hangcheck_hung(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
|
|
|
if (dev_priv->hangcheck_count++ > 1) {
|
|
bool hung = true;
|
|
|
|
DRM_ERROR("Hangcheck timer elapsed... GPU hung\n");
|
|
i915_handle_error(dev, true);
|
|
|
|
if (!IS_GEN2(dev)) {
|
|
struct intel_ring_buffer *ring;
|
|
int i;
|
|
|
|
/* Is the chip hanging on a WAIT_FOR_EVENT?
|
|
* If so we can simply poke the RB_WAIT bit
|
|
* and break the hang. This should work on
|
|
* all but the second generation chipsets.
|
|
*/
|
|
for_each_ring(ring, dev_priv, i)
|
|
hung &= !kick_ring(ring);
|
|
}
|
|
|
|
return hung;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
/**
|
|
* This is called when the chip hasn't reported back with completed
|
|
* batchbuffers in a long time. The first time this is called we simply record
|
|
* ACTHD. If ACTHD hasn't changed by the time the hangcheck timer elapses
|
|
* again, we assume the chip is wedged and try to fix it.
|
|
*/
|
|
void i915_hangcheck_elapsed(unsigned long data)
|
|
{
|
|
struct drm_device *dev = (struct drm_device *)data;
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
|
uint32_t acthd[I915_NUM_RINGS], instdone[I915_NUM_INSTDONE_REG];
|
|
struct intel_ring_buffer *ring;
|
|
bool err = false, idle;
|
|
int i;
|
|
|
|
if (!i915_enable_hangcheck)
|
|
return;
|
|
|
|
memset(acthd, 0, sizeof(acthd));
|
|
idle = true;
|
|
for_each_ring(ring, dev_priv, i) {
|
|
idle &= i915_hangcheck_ring_idle(ring, &err);
|
|
acthd[i] = intel_ring_get_active_head(ring);
|
|
}
|
|
|
|
/* If all work is done then ACTHD clearly hasn't advanced. */
|
|
if (idle) {
|
|
if (err) {
|
|
if (i915_hangcheck_hung(dev))
|
|
return;
|
|
|
|
goto repeat;
|
|
}
|
|
|
|
dev_priv->hangcheck_count = 0;
|
|
return;
|
|
}
|
|
|
|
i915_get_extra_instdone(dev, instdone);
|
|
if (memcmp(dev_priv->last_acthd, acthd, sizeof(acthd)) == 0 &&
|
|
memcmp(dev_priv->prev_instdone, instdone, sizeof(instdone)) == 0) {
|
|
if (i915_hangcheck_hung(dev))
|
|
return;
|
|
} else {
|
|
dev_priv->hangcheck_count = 0;
|
|
|
|
memcpy(dev_priv->last_acthd, acthd, sizeof(acthd));
|
|
memcpy(dev_priv->prev_instdone, instdone, sizeof(instdone));
|
|
}
|
|
|
|
repeat:
|
|
/* Reset timer case chip hangs without another request being added */
|
|
mod_timer(&dev_priv->hangcheck_timer,
|
|
round_jiffies_up(jiffies + DRM_I915_HANGCHECK_JIFFIES));
|
|
}
|
|
|
|
/* drm_dma.h hooks
|
|
*/
|
|
static void ironlake_irq_preinstall(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
|
|
atomic_set(&dev_priv->irq_received, 0);
|
|
|
|
I915_WRITE(HWSTAM, 0xeffe);
|
|
|
|
/* XXX hotplug from PCH */
|
|
|
|
I915_WRITE(DEIMR, 0xffffffff);
|
|
I915_WRITE(DEIER, 0x0);
|
|
POSTING_READ(DEIER);
|
|
|
|
/* and GT */
|
|
I915_WRITE(GTIMR, 0xffffffff);
|
|
I915_WRITE(GTIER, 0x0);
|
|
POSTING_READ(GTIER);
|
|
|
|
/* south display irq */
|
|
I915_WRITE(SDEIMR, 0xffffffff);
|
|
I915_WRITE(SDEIER, 0x0);
|
|
POSTING_READ(SDEIER);
|
|
}
|
|
|
|
static void valleyview_irq_preinstall(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
int pipe;
|
|
|
|
atomic_set(&dev_priv->irq_received, 0);
|
|
|
|
/* VLV magic */
|
|
I915_WRITE(VLV_IMR, 0);
|
|
I915_WRITE(RING_IMR(RENDER_RING_BASE), 0);
|
|
I915_WRITE(RING_IMR(GEN6_BSD_RING_BASE), 0);
|
|
I915_WRITE(RING_IMR(BLT_RING_BASE), 0);
|
|
|
|
/* and GT */
|
|
I915_WRITE(GTIIR, I915_READ(GTIIR));
|
|
I915_WRITE(GTIIR, I915_READ(GTIIR));
|
|
I915_WRITE(GTIMR, 0xffffffff);
|
|
I915_WRITE(GTIER, 0x0);
|
|
POSTING_READ(GTIER);
|
|
|
|
I915_WRITE(DPINVGTT, 0xff);
|
|
|
|
I915_WRITE(PORT_HOTPLUG_EN, 0);
|
|
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
|
|
for_each_pipe(pipe)
|
|
I915_WRITE(PIPESTAT(pipe), 0xffff);
|
|
I915_WRITE(VLV_IIR, 0xffffffff);
|
|
I915_WRITE(VLV_IMR, 0xffffffff);
|
|
I915_WRITE(VLV_IER, 0x0);
|
|
POSTING_READ(VLV_IER);
|
|
}
|
|
|
|
/*
|
|
* Enable digital hotplug on the PCH, and configure the DP short pulse
|
|
* duration to 2ms (which is the minimum in the Display Port spec)
|
|
*
|
|
* This register is the same on all known PCH chips.
|
|
*/
|
|
|
|
static void ironlake_enable_pch_hotplug(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
u32 hotplug;
|
|
|
|
hotplug = I915_READ(PCH_PORT_HOTPLUG);
|
|
hotplug &= ~(PORTD_PULSE_DURATION_MASK|PORTC_PULSE_DURATION_MASK|PORTB_PULSE_DURATION_MASK);
|
|
hotplug |= PORTD_HOTPLUG_ENABLE | PORTD_PULSE_DURATION_2ms;
|
|
hotplug |= PORTC_HOTPLUG_ENABLE | PORTC_PULSE_DURATION_2ms;
|
|
hotplug |= PORTB_HOTPLUG_ENABLE | PORTB_PULSE_DURATION_2ms;
|
|
I915_WRITE(PCH_PORT_HOTPLUG, hotplug);
|
|
}
|
|
|
|
static int ironlake_irq_postinstall(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
/* enable kind of interrupts always enabled */
|
|
u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT |
|
|
DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE;
|
|
u32 render_irqs;
|
|
u32 hotplug_mask;
|
|
|
|
dev_priv->irq_mask = ~display_mask;
|
|
|
|
/* should always can generate irq */
|
|
I915_WRITE(DEIIR, I915_READ(DEIIR));
|
|
I915_WRITE(DEIMR, dev_priv->irq_mask);
|
|
I915_WRITE(DEIER, display_mask | DE_PIPEA_VBLANK | DE_PIPEB_VBLANK);
|
|
POSTING_READ(DEIER);
|
|
|
|
dev_priv->gt_irq_mask = ~0;
|
|
|
|
I915_WRITE(GTIIR, I915_READ(GTIIR));
|
|
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
|
|
|
|
if (IS_GEN6(dev))
|
|
render_irqs =
|
|
GT_USER_INTERRUPT |
|
|
GEN6_BSD_USER_INTERRUPT |
|
|
GEN6_BLITTER_USER_INTERRUPT;
|
|
else
|
|
render_irqs =
|
|
GT_USER_INTERRUPT |
|
|
GT_PIPE_NOTIFY |
|
|
GT_BSD_USER_INTERRUPT;
|
|
I915_WRITE(GTIER, render_irqs);
|
|
POSTING_READ(GTIER);
|
|
|
|
if (HAS_PCH_CPT(dev)) {
|
|
hotplug_mask = (SDE_CRT_HOTPLUG_CPT |
|
|
SDE_PORTB_HOTPLUG_CPT |
|
|
SDE_PORTC_HOTPLUG_CPT |
|
|
SDE_PORTD_HOTPLUG_CPT |
|
|
SDE_GMBUS_CPT);
|
|
} else {
|
|
hotplug_mask = (SDE_CRT_HOTPLUG |
|
|
SDE_PORTB_HOTPLUG |
|
|
SDE_PORTC_HOTPLUG |
|
|
SDE_PORTD_HOTPLUG |
|
|
SDE_GMBUS |
|
|
SDE_AUX_MASK);
|
|
}
|
|
|
|
dev_priv->pch_irq_mask = ~hotplug_mask;
|
|
|
|
I915_WRITE(SDEIIR, I915_READ(SDEIIR));
|
|
I915_WRITE(SDEIMR, dev_priv->pch_irq_mask);
|
|
I915_WRITE(SDEIER, hotplug_mask);
|
|
POSTING_READ(SDEIER);
|
|
|
|
ironlake_enable_pch_hotplug(dev);
|
|
|
|
if (IS_IRONLAKE_M(dev)) {
|
|
/* Clear & enable PCU event interrupts */
|
|
I915_WRITE(DEIIR, DE_PCU_EVENT);
|
|
I915_WRITE(DEIER, I915_READ(DEIER) | DE_PCU_EVENT);
|
|
ironlake_enable_display_irq(dev_priv, DE_PCU_EVENT);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ivybridge_irq_postinstall(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
/* enable kind of interrupts always enabled */
|
|
u32 display_mask =
|
|
DE_MASTER_IRQ_CONTROL | DE_GSE_IVB | DE_PCH_EVENT_IVB |
|
|
DE_PLANEC_FLIP_DONE_IVB |
|
|
DE_PLANEB_FLIP_DONE_IVB |
|
|
DE_PLANEA_FLIP_DONE_IVB;
|
|
u32 render_irqs;
|
|
u32 hotplug_mask;
|
|
|
|
dev_priv->irq_mask = ~display_mask;
|
|
|
|
/* should always can generate irq */
|
|
I915_WRITE(DEIIR, I915_READ(DEIIR));
|
|
I915_WRITE(DEIMR, dev_priv->irq_mask);
|
|
I915_WRITE(DEIER,
|
|
display_mask |
|
|
DE_PIPEC_VBLANK_IVB |
|
|
DE_PIPEB_VBLANK_IVB |
|
|
DE_PIPEA_VBLANK_IVB);
|
|
POSTING_READ(DEIER);
|
|
|
|
dev_priv->gt_irq_mask = ~GT_GEN7_L3_PARITY_ERROR_INTERRUPT;
|
|
|
|
I915_WRITE(GTIIR, I915_READ(GTIIR));
|
|
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
|
|
|
|
render_irqs = GT_USER_INTERRUPT | GEN6_BSD_USER_INTERRUPT |
|
|
GEN6_BLITTER_USER_INTERRUPT | GT_GEN7_L3_PARITY_ERROR_INTERRUPT;
|
|
I915_WRITE(GTIER, render_irqs);
|
|
POSTING_READ(GTIER);
|
|
|
|
hotplug_mask = (SDE_CRT_HOTPLUG_CPT |
|
|
SDE_PORTB_HOTPLUG_CPT |
|
|
SDE_PORTC_HOTPLUG_CPT |
|
|
SDE_PORTD_HOTPLUG_CPT |
|
|
SDE_GMBUS_CPT);
|
|
dev_priv->pch_irq_mask = ~hotplug_mask;
|
|
|
|
I915_WRITE(SDEIIR, I915_READ(SDEIIR));
|
|
I915_WRITE(SDEIMR, dev_priv->pch_irq_mask);
|
|
I915_WRITE(SDEIER, hotplug_mask);
|
|
POSTING_READ(SDEIER);
|
|
|
|
ironlake_enable_pch_hotplug(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int valleyview_irq_postinstall(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
u32 enable_mask;
|
|
u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
|
|
u32 pipestat_enable = PLANE_FLIP_DONE_INT_EN_VLV;
|
|
u32 render_irqs;
|
|
u16 msid;
|
|
|
|
enable_mask = I915_DISPLAY_PORT_INTERRUPT;
|
|
enable_mask |= I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
|
|
I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT |
|
|
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
|
|
I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
|
|
|
|
/*
|
|
*Leave vblank interrupts masked initially. enable/disable will
|
|
* toggle them based on usage.
|
|
*/
|
|
dev_priv->irq_mask = (~enable_mask) |
|
|
I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT |
|
|
I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
|
|
|
|
dev_priv->pipestat[0] = 0;
|
|
dev_priv->pipestat[1] = 0;
|
|
|
|
/* Hack for broken MSIs on VLV */
|
|
pci_write_config_dword(dev_priv->dev->pdev, 0x94, 0xfee00000);
|
|
pci_read_config_word(dev->pdev, 0x98, &msid);
|
|
msid &= 0xff; /* mask out delivery bits */
|
|
msid |= (1<<14);
|
|
pci_write_config_word(dev_priv->dev->pdev, 0x98, msid);
|
|
|
|
I915_WRITE(VLV_IMR, dev_priv->irq_mask);
|
|
I915_WRITE(VLV_IER, enable_mask);
|
|
I915_WRITE(VLV_IIR, 0xffffffff);
|
|
I915_WRITE(PIPESTAT(0), 0xffff);
|
|
I915_WRITE(PIPESTAT(1), 0xffff);
|
|
POSTING_READ(VLV_IER);
|
|
|
|
i915_enable_pipestat(dev_priv, 0, pipestat_enable);
|
|
i915_enable_pipestat(dev_priv, 0, PIPE_GMBUS_EVENT_ENABLE);
|
|
i915_enable_pipestat(dev_priv, 1, pipestat_enable);
|
|
|
|
I915_WRITE(VLV_IIR, 0xffffffff);
|
|
I915_WRITE(VLV_IIR, 0xffffffff);
|
|
|
|
I915_WRITE(GTIIR, I915_READ(GTIIR));
|
|
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
|
|
|
|
render_irqs = GT_USER_INTERRUPT | GEN6_BSD_USER_INTERRUPT |
|
|
GEN6_BLITTER_USER_INTERRUPT;
|
|
I915_WRITE(GTIER, render_irqs);
|
|
POSTING_READ(GTIER);
|
|
|
|
/* ack & enable invalid PTE error interrupts */
|
|
#if 0 /* FIXME: add support to irq handler for checking these bits */
|
|
I915_WRITE(DPINVGTT, DPINVGTT_STATUS_MASK);
|
|
I915_WRITE(DPINVGTT, DPINVGTT_EN_MASK);
|
|
#endif
|
|
|
|
I915_WRITE(VLV_MASTER_IER, MASTER_INTERRUPT_ENABLE);
|
|
/* Note HDMI and DP share bits */
|
|
if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
|
|
hotplug_en |= HDMIB_HOTPLUG_INT_EN;
|
|
if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
|
|
hotplug_en |= HDMIC_HOTPLUG_INT_EN;
|
|
if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
|
|
hotplug_en |= HDMID_HOTPLUG_INT_EN;
|
|
if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I915)
|
|
hotplug_en |= SDVOC_HOTPLUG_INT_EN;
|
|
if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I915)
|
|
hotplug_en |= SDVOB_HOTPLUG_INT_EN;
|
|
if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
|
|
hotplug_en |= CRT_HOTPLUG_INT_EN;
|
|
hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
|
|
}
|
|
|
|
I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void valleyview_irq_uninstall(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
int pipe;
|
|
|
|
if (!dev_priv)
|
|
return;
|
|
|
|
for_each_pipe(pipe)
|
|
I915_WRITE(PIPESTAT(pipe), 0xffff);
|
|
|
|
I915_WRITE(HWSTAM, 0xffffffff);
|
|
I915_WRITE(PORT_HOTPLUG_EN, 0);
|
|
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
|
|
for_each_pipe(pipe)
|
|
I915_WRITE(PIPESTAT(pipe), 0xffff);
|
|
I915_WRITE(VLV_IIR, 0xffffffff);
|
|
I915_WRITE(VLV_IMR, 0xffffffff);
|
|
I915_WRITE(VLV_IER, 0x0);
|
|
POSTING_READ(VLV_IER);
|
|
}
|
|
|
|
static void ironlake_irq_uninstall(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
|
|
if (!dev_priv)
|
|
return;
|
|
|
|
I915_WRITE(HWSTAM, 0xffffffff);
|
|
|
|
I915_WRITE(DEIMR, 0xffffffff);
|
|
I915_WRITE(DEIER, 0x0);
|
|
I915_WRITE(DEIIR, I915_READ(DEIIR));
|
|
|
|
I915_WRITE(GTIMR, 0xffffffff);
|
|
I915_WRITE(GTIER, 0x0);
|
|
I915_WRITE(GTIIR, I915_READ(GTIIR));
|
|
|
|
I915_WRITE(SDEIMR, 0xffffffff);
|
|
I915_WRITE(SDEIER, 0x0);
|
|
I915_WRITE(SDEIIR, I915_READ(SDEIIR));
|
|
}
|
|
|
|
static void i8xx_irq_preinstall(struct drm_device * dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
int pipe;
|
|
|
|
atomic_set(&dev_priv->irq_received, 0);
|
|
|
|
for_each_pipe(pipe)
|
|
I915_WRITE(PIPESTAT(pipe), 0);
|
|
I915_WRITE16(IMR, 0xffff);
|
|
I915_WRITE16(IER, 0x0);
|
|
POSTING_READ16(IER);
|
|
}
|
|
|
|
static int i8xx_irq_postinstall(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
|
|
dev_priv->pipestat[0] = 0;
|
|
dev_priv->pipestat[1] = 0;
|
|
|
|
I915_WRITE16(EMR,
|
|
~(I915_ERROR_PAGE_TABLE | I915_ERROR_MEMORY_REFRESH));
|
|
|
|
/* Unmask the interrupts that we always want on. */
|
|
dev_priv->irq_mask =
|
|
~(I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
|
|
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
|
|
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
|
|
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT |
|
|
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
|
|
I915_WRITE16(IMR, dev_priv->irq_mask);
|
|
|
|
I915_WRITE16(IER,
|
|
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
|
|
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
|
|
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT |
|
|
I915_USER_INTERRUPT);
|
|
POSTING_READ16(IER);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t i8xx_irq_handler(int irq, void *arg)
|
|
{
|
|
struct drm_device *dev = (struct drm_device *) arg;
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
u16 iir, new_iir;
|
|
u32 pipe_stats[2];
|
|
unsigned long irqflags;
|
|
int irq_received;
|
|
int pipe;
|
|
u16 flip_mask =
|
|
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
|
|
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
|
|
|
|
atomic_inc(&dev_priv->irq_received);
|
|
|
|
iir = I915_READ16(IIR);
|
|
if (iir == 0)
|
|
return IRQ_NONE;
|
|
|
|
while (iir & ~flip_mask) {
|
|
/* Can't rely on pipestat interrupt bit in iir as it might
|
|
* have been cleared after the pipestat interrupt was received.
|
|
* It doesn't set the bit in iir again, but it still produces
|
|
* interrupts (for non-MSI).
|
|
*/
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
|
|
i915_handle_error(dev, false);
|
|
|
|
for_each_pipe(pipe) {
|
|
int reg = PIPESTAT(pipe);
|
|
pipe_stats[pipe] = I915_READ(reg);
|
|
|
|
/*
|
|
* Clear the PIPE*STAT regs before the IIR
|
|
*/
|
|
if (pipe_stats[pipe] & 0x8000ffff) {
|
|
if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS)
|
|
DRM_DEBUG_DRIVER("pipe %c underrun\n",
|
|
pipe_name(pipe));
|
|
I915_WRITE(reg, pipe_stats[pipe]);
|
|
irq_received = 1;
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
|
|
I915_WRITE16(IIR, iir & ~flip_mask);
|
|
new_iir = I915_READ16(IIR); /* Flush posted writes */
|
|
|
|
i915_update_dri1_breadcrumb(dev);
|
|
|
|
if (iir & I915_USER_INTERRUPT)
|
|
notify_ring(dev, &dev_priv->ring[RCS]);
|
|
|
|
if (pipe_stats[0] & PIPE_VBLANK_INTERRUPT_STATUS &&
|
|
drm_handle_vblank(dev, 0)) {
|
|
if (iir & I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT) {
|
|
intel_prepare_page_flip(dev, 0);
|
|
intel_finish_page_flip(dev, 0);
|
|
flip_mask &= ~I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT;
|
|
}
|
|
}
|
|
|
|
if (pipe_stats[1] & PIPE_VBLANK_INTERRUPT_STATUS &&
|
|
drm_handle_vblank(dev, 1)) {
|
|
if (iir & I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT) {
|
|
intel_prepare_page_flip(dev, 1);
|
|
intel_finish_page_flip(dev, 1);
|
|
flip_mask &= ~I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
|
|
}
|
|
}
|
|
|
|
iir = new_iir;
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void i8xx_irq_uninstall(struct drm_device * dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
int pipe;
|
|
|
|
for_each_pipe(pipe) {
|
|
/* Clear enable bits; then clear status bits */
|
|
I915_WRITE(PIPESTAT(pipe), 0);
|
|
I915_WRITE(PIPESTAT(pipe), I915_READ(PIPESTAT(pipe)));
|
|
}
|
|
I915_WRITE16(IMR, 0xffff);
|
|
I915_WRITE16(IER, 0x0);
|
|
I915_WRITE16(IIR, I915_READ16(IIR));
|
|
}
|
|
|
|
static void i915_irq_preinstall(struct drm_device * dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
int pipe;
|
|
|
|
atomic_set(&dev_priv->irq_received, 0);
|
|
|
|
if (I915_HAS_HOTPLUG(dev)) {
|
|
I915_WRITE(PORT_HOTPLUG_EN, 0);
|
|
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
|
|
}
|
|
|
|
I915_WRITE16(HWSTAM, 0xeffe);
|
|
for_each_pipe(pipe)
|
|
I915_WRITE(PIPESTAT(pipe), 0);
|
|
I915_WRITE(IMR, 0xffffffff);
|
|
I915_WRITE(IER, 0x0);
|
|
POSTING_READ(IER);
|
|
}
|
|
|
|
static int i915_irq_postinstall(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
u32 enable_mask;
|
|
|
|
dev_priv->pipestat[0] = 0;
|
|
dev_priv->pipestat[1] = 0;
|
|
|
|
I915_WRITE(EMR, ~(I915_ERROR_PAGE_TABLE | I915_ERROR_MEMORY_REFRESH));
|
|
|
|
/* Unmask the interrupts that we always want on. */
|
|
dev_priv->irq_mask =
|
|
~(I915_ASLE_INTERRUPT |
|
|
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
|
|
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
|
|
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
|
|
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT |
|
|
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
|
|
|
|
enable_mask =
|
|
I915_ASLE_INTERRUPT |
|
|
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
|
|
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
|
|
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT |
|
|
I915_USER_INTERRUPT;
|
|
|
|
if (I915_HAS_HOTPLUG(dev)) {
|
|
/* Enable in IER... */
|
|
enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
|
|
/* and unmask in IMR */
|
|
dev_priv->irq_mask &= ~I915_DISPLAY_PORT_INTERRUPT;
|
|
}
|
|
|
|
I915_WRITE(IMR, dev_priv->irq_mask);
|
|
I915_WRITE(IER, enable_mask);
|
|
POSTING_READ(IER);
|
|
|
|
if (I915_HAS_HOTPLUG(dev)) {
|
|
u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
|
|
|
|
if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
|
|
hotplug_en |= HDMIB_HOTPLUG_INT_EN;
|
|
if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
|
|
hotplug_en |= HDMIC_HOTPLUG_INT_EN;
|
|
if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
|
|
hotplug_en |= HDMID_HOTPLUG_INT_EN;
|
|
if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I915)
|
|
hotplug_en |= SDVOC_HOTPLUG_INT_EN;
|
|
if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I915)
|
|
hotplug_en |= SDVOB_HOTPLUG_INT_EN;
|
|
if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
|
|
hotplug_en |= CRT_HOTPLUG_INT_EN;
|
|
hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
|
|
}
|
|
|
|
/* Ignore TV since it's buggy */
|
|
|
|
I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
|
|
}
|
|
|
|
intel_opregion_enable_asle(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t i915_irq_handler(int irq, void *arg)
|
|
{
|
|
struct drm_device *dev = (struct drm_device *) arg;
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
u32 iir, new_iir, pipe_stats[I915_MAX_PIPES];
|
|
unsigned long irqflags;
|
|
u32 flip_mask =
|
|
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
|
|
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
|
|
u32 flip[2] = {
|
|
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT,
|
|
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT
|
|
};
|
|
int pipe, ret = IRQ_NONE;
|
|
|
|
atomic_inc(&dev_priv->irq_received);
|
|
|
|
iir = I915_READ(IIR);
|
|
do {
|
|
bool irq_received = (iir & ~flip_mask) != 0;
|
|
bool blc_event = false;
|
|
|
|
/* Can't rely on pipestat interrupt bit in iir as it might
|
|
* have been cleared after the pipestat interrupt was received.
|
|
* It doesn't set the bit in iir again, but it still produces
|
|
* interrupts (for non-MSI).
|
|
*/
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
|
|
i915_handle_error(dev, false);
|
|
|
|
for_each_pipe(pipe) {
|
|
int reg = PIPESTAT(pipe);
|
|
pipe_stats[pipe] = I915_READ(reg);
|
|
|
|
/* Clear the PIPE*STAT regs before the IIR */
|
|
if (pipe_stats[pipe] & 0x8000ffff) {
|
|
if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS)
|
|
DRM_DEBUG_DRIVER("pipe %c underrun\n",
|
|
pipe_name(pipe));
|
|
I915_WRITE(reg, pipe_stats[pipe]);
|
|
irq_received = true;
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
|
|
if (!irq_received)
|
|
break;
|
|
|
|
/* Consume port. Then clear IIR or we'll miss events */
|
|
if ((I915_HAS_HOTPLUG(dev)) &&
|
|
(iir & I915_DISPLAY_PORT_INTERRUPT)) {
|
|
u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
|
|
|
|
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
|
|
hotplug_status);
|
|
if (hotplug_status & dev_priv->hotplug_supported_mask)
|
|
queue_work(dev_priv->wq,
|
|
&dev_priv->hotplug_work);
|
|
|
|
I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
|
|
POSTING_READ(PORT_HOTPLUG_STAT);
|
|
}
|
|
|
|
I915_WRITE(IIR, iir & ~flip_mask);
|
|
new_iir = I915_READ(IIR); /* Flush posted writes */
|
|
|
|
if (iir & I915_USER_INTERRUPT)
|
|
notify_ring(dev, &dev_priv->ring[RCS]);
|
|
|
|
for_each_pipe(pipe) {
|
|
int plane = pipe;
|
|
if (IS_MOBILE(dev))
|
|
plane = !plane;
|
|
if (pipe_stats[pipe] & PIPE_VBLANK_INTERRUPT_STATUS &&
|
|
drm_handle_vblank(dev, pipe)) {
|
|
if (iir & flip[plane]) {
|
|
intel_prepare_page_flip(dev, plane);
|
|
intel_finish_page_flip(dev, pipe);
|
|
flip_mask &= ~flip[plane];
|
|
}
|
|
}
|
|
|
|
if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS)
|
|
blc_event = true;
|
|
}
|
|
|
|
if (blc_event || (iir & I915_ASLE_INTERRUPT))
|
|
intel_opregion_asle_intr(dev);
|
|
|
|
/* With MSI, interrupts are only generated when iir
|
|
* transitions from zero to nonzero. If another bit got
|
|
* set while we were handling the existing iir bits, then
|
|
* we would never get another interrupt.
|
|
*
|
|
* This is fine on non-MSI as well, as if we hit this path
|
|
* we avoid exiting the interrupt handler only to generate
|
|
* another one.
|
|
*
|
|
* Note that for MSI this could cause a stray interrupt report
|
|
* if an interrupt landed in the time between writing IIR and
|
|
* the posting read. This should be rare enough to never
|
|
* trigger the 99% of 100,000 interrupts test for disabling
|
|
* stray interrupts.
|
|
*/
|
|
ret = IRQ_HANDLED;
|
|
iir = new_iir;
|
|
} while (iir & ~flip_mask);
|
|
|
|
i915_update_dri1_breadcrumb(dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void i915_irq_uninstall(struct drm_device * dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
int pipe;
|
|
|
|
if (I915_HAS_HOTPLUG(dev)) {
|
|
I915_WRITE(PORT_HOTPLUG_EN, 0);
|
|
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
|
|
}
|
|
|
|
I915_WRITE16(HWSTAM, 0xffff);
|
|
for_each_pipe(pipe) {
|
|
/* Clear enable bits; then clear status bits */
|
|
I915_WRITE(PIPESTAT(pipe), 0);
|
|
I915_WRITE(PIPESTAT(pipe), I915_READ(PIPESTAT(pipe)));
|
|
}
|
|
I915_WRITE(IMR, 0xffffffff);
|
|
I915_WRITE(IER, 0x0);
|
|
|
|
I915_WRITE(IIR, I915_READ(IIR));
|
|
}
|
|
|
|
static void i965_irq_preinstall(struct drm_device * dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
int pipe;
|
|
|
|
atomic_set(&dev_priv->irq_received, 0);
|
|
|
|
I915_WRITE(PORT_HOTPLUG_EN, 0);
|
|
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
|
|
|
|
I915_WRITE(HWSTAM, 0xeffe);
|
|
for_each_pipe(pipe)
|
|
I915_WRITE(PIPESTAT(pipe), 0);
|
|
I915_WRITE(IMR, 0xffffffff);
|
|
I915_WRITE(IER, 0x0);
|
|
POSTING_READ(IER);
|
|
}
|
|
|
|
static int i965_irq_postinstall(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
u32 hotplug_en;
|
|
u32 enable_mask;
|
|
u32 error_mask;
|
|
|
|
/* Unmask the interrupts that we always want on. */
|
|
dev_priv->irq_mask = ~(I915_ASLE_INTERRUPT |
|
|
I915_DISPLAY_PORT_INTERRUPT |
|
|
I915_DISPLAY_PIPE_A_EVENT_INTERRUPT |
|
|
I915_DISPLAY_PIPE_B_EVENT_INTERRUPT |
|
|
I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
|
|
I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT |
|
|
I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
|
|
|
|
enable_mask = ~dev_priv->irq_mask;
|
|
enable_mask |= I915_USER_INTERRUPT;
|
|
|
|
if (IS_G4X(dev))
|
|
enable_mask |= I915_BSD_USER_INTERRUPT;
|
|
|
|
dev_priv->pipestat[0] = 0;
|
|
dev_priv->pipestat[1] = 0;
|
|
i915_enable_pipestat(dev_priv, 0, PIPE_GMBUS_EVENT_ENABLE);
|
|
|
|
/*
|
|
* Enable some error detection, note the instruction error mask
|
|
* bit is reserved, so we leave it masked.
|
|
*/
|
|
if (IS_G4X(dev)) {
|
|
error_mask = ~(GM45_ERROR_PAGE_TABLE |
|
|
GM45_ERROR_MEM_PRIV |
|
|
GM45_ERROR_CP_PRIV |
|
|
I915_ERROR_MEMORY_REFRESH);
|
|
} else {
|
|
error_mask = ~(I915_ERROR_PAGE_TABLE |
|
|
I915_ERROR_MEMORY_REFRESH);
|
|
}
|
|
I915_WRITE(EMR, error_mask);
|
|
|
|
I915_WRITE(IMR, dev_priv->irq_mask);
|
|
I915_WRITE(IER, enable_mask);
|
|
POSTING_READ(IER);
|
|
|
|
/* Note HDMI and DP share hotplug bits */
|
|
hotplug_en = 0;
|
|
if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
|
|
hotplug_en |= HDMIB_HOTPLUG_INT_EN;
|
|
if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
|
|
hotplug_en |= HDMIC_HOTPLUG_INT_EN;
|
|
if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
|
|
hotplug_en |= HDMID_HOTPLUG_INT_EN;
|
|
if (IS_G4X(dev)) {
|
|
if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_G4X)
|
|
hotplug_en |= SDVOC_HOTPLUG_INT_EN;
|
|
if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_G4X)
|
|
hotplug_en |= SDVOB_HOTPLUG_INT_EN;
|
|
} else {
|
|
if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I965)
|
|
hotplug_en |= SDVOC_HOTPLUG_INT_EN;
|
|
if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I965)
|
|
hotplug_en |= SDVOB_HOTPLUG_INT_EN;
|
|
}
|
|
if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
|
|
hotplug_en |= CRT_HOTPLUG_INT_EN;
|
|
|
|
/* Programming the CRT detection parameters tends
|
|
to generate a spurious hotplug event about three
|
|
seconds later. So just do it once.
|
|
*/
|
|
if (IS_G4X(dev))
|
|
hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
|
|
hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
|
|
}
|
|
|
|
/* Ignore TV since it's buggy */
|
|
|
|
I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
|
|
|
|
intel_opregion_enable_asle(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t i965_irq_handler(int irq, void *arg)
|
|
{
|
|
struct drm_device *dev = (struct drm_device *) arg;
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
u32 iir, new_iir;
|
|
u32 pipe_stats[I915_MAX_PIPES];
|
|
unsigned long irqflags;
|
|
int irq_received;
|
|
int ret = IRQ_NONE, pipe;
|
|
|
|
atomic_inc(&dev_priv->irq_received);
|
|
|
|
iir = I915_READ(IIR);
|
|
|
|
for (;;) {
|
|
bool blc_event = false;
|
|
|
|
irq_received = iir != 0;
|
|
|
|
/* Can't rely on pipestat interrupt bit in iir as it might
|
|
* have been cleared after the pipestat interrupt was received.
|
|
* It doesn't set the bit in iir again, but it still produces
|
|
* interrupts (for non-MSI).
|
|
*/
|
|
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
|
|
if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
|
|
i915_handle_error(dev, false);
|
|
|
|
for_each_pipe(pipe) {
|
|
int reg = PIPESTAT(pipe);
|
|
pipe_stats[pipe] = I915_READ(reg);
|
|
|
|
/*
|
|
* Clear the PIPE*STAT regs before the IIR
|
|
*/
|
|
if (pipe_stats[pipe] & 0x8000ffff) {
|
|
if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS)
|
|
DRM_DEBUG_DRIVER("pipe %c underrun\n",
|
|
pipe_name(pipe));
|
|
I915_WRITE(reg, pipe_stats[pipe]);
|
|
irq_received = 1;
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
|
|
|
|
if (!irq_received)
|
|
break;
|
|
|
|
ret = IRQ_HANDLED;
|
|
|
|
/* Consume port. Then clear IIR or we'll miss events */
|
|
if (iir & I915_DISPLAY_PORT_INTERRUPT) {
|
|
u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
|
|
|
|
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
|
|
hotplug_status);
|
|
if (hotplug_status & dev_priv->hotplug_supported_mask)
|
|
queue_work(dev_priv->wq,
|
|
&dev_priv->hotplug_work);
|
|
|
|
I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
|
|
I915_READ(PORT_HOTPLUG_STAT);
|
|
}
|
|
|
|
I915_WRITE(IIR, iir);
|
|
new_iir = I915_READ(IIR); /* Flush posted writes */
|
|
|
|
if (iir & I915_USER_INTERRUPT)
|
|
notify_ring(dev, &dev_priv->ring[RCS]);
|
|
if (iir & I915_BSD_USER_INTERRUPT)
|
|
notify_ring(dev, &dev_priv->ring[VCS]);
|
|
|
|
if (iir & I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT)
|
|
intel_prepare_page_flip(dev, 0);
|
|
|
|
if (iir & I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT)
|
|
intel_prepare_page_flip(dev, 1);
|
|
|
|
for_each_pipe(pipe) {
|
|
if (pipe_stats[pipe] & PIPE_START_VBLANK_INTERRUPT_STATUS &&
|
|
drm_handle_vblank(dev, pipe)) {
|
|
i915_pageflip_stall_check(dev, pipe);
|
|
intel_finish_page_flip(dev, pipe);
|
|
}
|
|
|
|
if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS)
|
|
blc_event = true;
|
|
}
|
|
|
|
|
|
if (blc_event || (iir & I915_ASLE_INTERRUPT))
|
|
intel_opregion_asle_intr(dev);
|
|
|
|
if (pipe_stats[0] & PIPE_GMBUS_INTERRUPT_STATUS)
|
|
gmbus_irq_handler(dev);
|
|
|
|
/* With MSI, interrupts are only generated when iir
|
|
* transitions from zero to nonzero. If another bit got
|
|
* set while we were handling the existing iir bits, then
|
|
* we would never get another interrupt.
|
|
*
|
|
* This is fine on non-MSI as well, as if we hit this path
|
|
* we avoid exiting the interrupt handler only to generate
|
|
* another one.
|
|
*
|
|
* Note that for MSI this could cause a stray interrupt report
|
|
* if an interrupt landed in the time between writing IIR and
|
|
* the posting read. This should be rare enough to never
|
|
* trigger the 99% of 100,000 interrupts test for disabling
|
|
* stray interrupts.
|
|
*/
|
|
iir = new_iir;
|
|
}
|
|
|
|
i915_update_dri1_breadcrumb(dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void i965_irq_uninstall(struct drm_device * dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
|
|
int pipe;
|
|
|
|
if (!dev_priv)
|
|
return;
|
|
|
|
I915_WRITE(PORT_HOTPLUG_EN, 0);
|
|
I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
|
|
|
|
I915_WRITE(HWSTAM, 0xffffffff);
|
|
for_each_pipe(pipe)
|
|
I915_WRITE(PIPESTAT(pipe), 0);
|
|
I915_WRITE(IMR, 0xffffffff);
|
|
I915_WRITE(IER, 0x0);
|
|
|
|
for_each_pipe(pipe)
|
|
I915_WRITE(PIPESTAT(pipe),
|
|
I915_READ(PIPESTAT(pipe)) & 0x8000ffff);
|
|
I915_WRITE(IIR, I915_READ(IIR));
|
|
}
|
|
|
|
void intel_irq_init(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func);
|
|
INIT_WORK(&dev_priv->error_work, i915_error_work_func);
|
|
INIT_WORK(&dev_priv->rps.work, gen6_pm_rps_work);
|
|
INIT_WORK(&dev_priv->l3_parity.error_work, ivybridge_parity_work);
|
|
|
|
setup_timer(&dev_priv->hangcheck_timer, i915_hangcheck_elapsed,
|
|
(unsigned long) dev);
|
|
|
|
dev->driver->get_vblank_counter = i915_get_vblank_counter;
|
|
dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
|
|
if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) {
|
|
dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */
|
|
dev->driver->get_vblank_counter = gm45_get_vblank_counter;
|
|
}
|
|
|
|
if (drm_core_check_feature(dev, DRIVER_MODESET))
|
|
dev->driver->get_vblank_timestamp = i915_get_vblank_timestamp;
|
|
else
|
|
dev->driver->get_vblank_timestamp = NULL;
|
|
dev->driver->get_scanout_position = i915_get_crtc_scanoutpos;
|
|
|
|
if (IS_VALLEYVIEW(dev)) {
|
|
dev->driver->irq_handler = valleyview_irq_handler;
|
|
dev->driver->irq_preinstall = valleyview_irq_preinstall;
|
|
dev->driver->irq_postinstall = valleyview_irq_postinstall;
|
|
dev->driver->irq_uninstall = valleyview_irq_uninstall;
|
|
dev->driver->enable_vblank = valleyview_enable_vblank;
|
|
dev->driver->disable_vblank = valleyview_disable_vblank;
|
|
} else if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) {
|
|
/* Share pre & uninstall handlers with ILK/SNB */
|
|
dev->driver->irq_handler = ivybridge_irq_handler;
|
|
dev->driver->irq_preinstall = ironlake_irq_preinstall;
|
|
dev->driver->irq_postinstall = ivybridge_irq_postinstall;
|
|
dev->driver->irq_uninstall = ironlake_irq_uninstall;
|
|
dev->driver->enable_vblank = ivybridge_enable_vblank;
|
|
dev->driver->disable_vblank = ivybridge_disable_vblank;
|
|
} else if (HAS_PCH_SPLIT(dev)) {
|
|
dev->driver->irq_handler = ironlake_irq_handler;
|
|
dev->driver->irq_preinstall = ironlake_irq_preinstall;
|
|
dev->driver->irq_postinstall = ironlake_irq_postinstall;
|
|
dev->driver->irq_uninstall = ironlake_irq_uninstall;
|
|
dev->driver->enable_vblank = ironlake_enable_vblank;
|
|
dev->driver->disable_vblank = ironlake_disable_vblank;
|
|
} else {
|
|
if (INTEL_INFO(dev)->gen == 2) {
|
|
dev->driver->irq_preinstall = i8xx_irq_preinstall;
|
|
dev->driver->irq_postinstall = i8xx_irq_postinstall;
|
|
dev->driver->irq_handler = i8xx_irq_handler;
|
|
dev->driver->irq_uninstall = i8xx_irq_uninstall;
|
|
} else if (INTEL_INFO(dev)->gen == 3) {
|
|
dev->driver->irq_preinstall = i915_irq_preinstall;
|
|
dev->driver->irq_postinstall = i915_irq_postinstall;
|
|
dev->driver->irq_uninstall = i915_irq_uninstall;
|
|
dev->driver->irq_handler = i915_irq_handler;
|
|
} else {
|
|
dev->driver->irq_preinstall = i965_irq_preinstall;
|
|
dev->driver->irq_postinstall = i965_irq_postinstall;
|
|
dev->driver->irq_uninstall = i965_irq_uninstall;
|
|
dev->driver->irq_handler = i965_irq_handler;
|
|
}
|
|
dev->driver->enable_vblank = i915_enable_vblank;
|
|
dev->driver->disable_vblank = i915_disable_vblank;
|
|
}
|
|
}
|