linux_dsm_epyc7002/arch/x86/kernel/pci-dma.c
Joerg Roedel 2842e5bf31 x86: move GART TLB flushing options to generic code
The GART currently implements the iommu=[no]fullflush command line
parameters which influence its IO/TLB flushing strategy. This patch
makes these parameters generic so that they can be used by the AMD IOMMU
too.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-19 12:59:06 +02:00

292 lines
6.6 KiB
C

#include <linux/dma-mapping.h>
#include <linux/dmar.h>
#include <linux/bootmem.h>
#include <linux/pci.h>
#include <asm/proto.h>
#include <asm/dma.h>
#include <asm/iommu.h>
#include <asm/calgary.h>
#include <asm/amd_iommu.h>
static int forbid_dac __read_mostly;
struct dma_mapping_ops *dma_ops;
EXPORT_SYMBOL(dma_ops);
static int iommu_sac_force __read_mostly;
/*
* If this is disabled the IOMMU will use an optimized flushing strategy
* of only flushing when an mapping is reused. With it true the GART is
* flushed for every mapping. Problem is that doing the lazy flush seems
* to trigger bugs with some popular PCI cards, in particular 3ware (but
* has been also also seen with Qlogic at least).
*/
int iommu_fullflush;
#ifdef CONFIG_IOMMU_DEBUG
int panic_on_overflow __read_mostly = 1;
int force_iommu __read_mostly = 1;
#else
int panic_on_overflow __read_mostly = 0;
int force_iommu __read_mostly = 0;
#endif
int iommu_merge __read_mostly = 0;
int no_iommu __read_mostly;
/* Set this to 1 if there is a HW IOMMU in the system */
int iommu_detected __read_mostly = 0;
/* This tells the BIO block layer to assume merging. Default to off
because we cannot guarantee merging later. */
int iommu_bio_merge __read_mostly = 0;
EXPORT_SYMBOL(iommu_bio_merge);
dma_addr_t bad_dma_address __read_mostly = 0;
EXPORT_SYMBOL(bad_dma_address);
/* Dummy device used for NULL arguments (normally ISA). Better would
be probably a smaller DMA mask, but this is bug-to-bug compatible
to older i386. */
struct device x86_dma_fallback_dev = {
.bus_id = "fallback device",
.coherent_dma_mask = DMA_32BIT_MASK,
.dma_mask = &x86_dma_fallback_dev.coherent_dma_mask,
};
EXPORT_SYMBOL(x86_dma_fallback_dev);
int dma_set_mask(struct device *dev, u64 mask)
{
if (!dev->dma_mask || !dma_supported(dev, mask))
return -EIO;
*dev->dma_mask = mask;
return 0;
}
EXPORT_SYMBOL(dma_set_mask);
#ifdef CONFIG_X86_64
static __initdata void *dma32_bootmem_ptr;
static unsigned long dma32_bootmem_size __initdata = (128ULL<<20);
static int __init parse_dma32_size_opt(char *p)
{
if (!p)
return -EINVAL;
dma32_bootmem_size = memparse(p, &p);
return 0;
}
early_param("dma32_size", parse_dma32_size_opt);
void __init dma32_reserve_bootmem(void)
{
unsigned long size, align;
if (max_pfn <= MAX_DMA32_PFN)
return;
/*
* check aperture_64.c allocate_aperture() for reason about
* using 512M as goal
*/
align = 64ULL<<20;
size = round_up(dma32_bootmem_size, align);
dma32_bootmem_ptr = __alloc_bootmem_nopanic(size, align,
512ULL<<20);
if (dma32_bootmem_ptr)
dma32_bootmem_size = size;
else
dma32_bootmem_size = 0;
}
static void __init dma32_free_bootmem(void)
{
if (max_pfn <= MAX_DMA32_PFN)
return;
if (!dma32_bootmem_ptr)
return;
free_bootmem(__pa(dma32_bootmem_ptr), dma32_bootmem_size);
dma32_bootmem_ptr = NULL;
dma32_bootmem_size = 0;
}
void __init pci_iommu_alloc(void)
{
/* free the range so iommu could get some range less than 4G */
dma32_free_bootmem();
/*
* The order of these functions is important for
* fall-back/fail-over reasons
*/
gart_iommu_hole_init();
detect_calgary();
detect_intel_iommu();
amd_iommu_detect();
pci_swiotlb_init();
}
unsigned long iommu_num_pages(unsigned long addr, unsigned long len)
{
unsigned long size = roundup((addr & ~PAGE_MASK) + len, PAGE_SIZE);
return size >> PAGE_SHIFT;
}
EXPORT_SYMBOL(iommu_num_pages);
#endif
/*
* See <Documentation/x86_64/boot-options.txt> for the iommu kernel parameter
* documentation.
*/
static __init int iommu_setup(char *p)
{
iommu_merge = 1;
if (!p)
return -EINVAL;
while (*p) {
if (!strncmp(p, "off", 3))
no_iommu = 1;
/* gart_parse_options has more force support */
if (!strncmp(p, "force", 5))
force_iommu = 1;
if (!strncmp(p, "noforce", 7)) {
iommu_merge = 0;
force_iommu = 0;
}
if (!strncmp(p, "biomerge", 8)) {
iommu_bio_merge = 4096;
iommu_merge = 1;
force_iommu = 1;
}
if (!strncmp(p, "panic", 5))
panic_on_overflow = 1;
if (!strncmp(p, "nopanic", 7))
panic_on_overflow = 0;
if (!strncmp(p, "merge", 5)) {
iommu_merge = 1;
force_iommu = 1;
}
if (!strncmp(p, "nomerge", 7))
iommu_merge = 0;
if (!strncmp(p, "fullflush", 8))
iommu_fullflush = 1;
if (!strncmp(p, "nofullflush", 11))
iommu_fullflush = 0;
if (!strncmp(p, "forcesac", 8))
iommu_sac_force = 1;
if (!strncmp(p, "allowdac", 8))
forbid_dac = 0;
if (!strncmp(p, "nodac", 5))
forbid_dac = -1;
if (!strncmp(p, "usedac", 6)) {
forbid_dac = -1;
return 1;
}
#ifdef CONFIG_SWIOTLB
if (!strncmp(p, "soft", 4))
swiotlb = 1;
#endif
gart_parse_options(p);
#ifdef CONFIG_CALGARY_IOMMU
if (!strncmp(p, "calgary", 7))
use_calgary = 1;
#endif /* CONFIG_CALGARY_IOMMU */
p += strcspn(p, ",");
if (*p == ',')
++p;
}
return 0;
}
early_param("iommu", iommu_setup);
int dma_supported(struct device *dev, u64 mask)
{
struct dma_mapping_ops *ops = get_dma_ops(dev);
#ifdef CONFIG_PCI
if (mask > 0xffffffff && forbid_dac > 0) {
dev_info(dev, "PCI: Disallowing DAC for device\n");
return 0;
}
#endif
if (ops->dma_supported)
return ops->dma_supported(dev, mask);
/* Copied from i386. Doesn't make much sense, because it will
only work for pci_alloc_coherent.
The caller just has to use GFP_DMA in this case. */
if (mask < DMA_24BIT_MASK)
return 0;
/* Tell the device to use SAC when IOMMU force is on. This
allows the driver to use cheaper accesses in some cases.
Problem with this is that if we overflow the IOMMU area and
return DAC as fallback address the device may not handle it
correctly.
As a special case some controllers have a 39bit address
mode that is as efficient as 32bit (aic79xx). Don't force
SAC for these. Assume all masks <= 40 bits are of this
type. Normally this doesn't make any difference, but gives
more gentle handling of IOMMU overflow. */
if (iommu_sac_force && (mask >= DMA_40BIT_MASK)) {
dev_info(dev, "Force SAC with mask %Lx\n", mask);
return 0;
}
return 1;
}
EXPORT_SYMBOL(dma_supported);
static int __init pci_iommu_init(void)
{
calgary_iommu_init();
intel_iommu_init();
amd_iommu_init();
gart_iommu_init();
no_iommu_init();
return 0;
}
void pci_iommu_shutdown(void)
{
gart_iommu_shutdown();
}
/* Must execute after PCI subsystem */
fs_initcall(pci_iommu_init);
#ifdef CONFIG_PCI
/* Many VIA bridges seem to corrupt data for DAC. Disable it here */
static __devinit void via_no_dac(struct pci_dev *dev)
{
if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) {
printk(KERN_INFO "PCI: VIA PCI bridge detected."
"Disabling DAC.\n");
forbid_dac = 1;
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac);
#endif