mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-06 05:26:40 +07:00
4df4db5c6c
This is a set of changes that converts the PMAZ-A support to the driver model. The use of the driver model required switching to the hotplug SCSI initialization model, which in turn required a change to the core NCR53C9x driver. I decided not to break all the frontend drivers and introduced an additional parameter for esp_allocate() to select between the old and the new model. I hope this is OK, but I would be fine with converting NCR53C9x to the new model unconditionally as long as I do not have to fix all the other frontends (OK, perhaps I could do some of them ;-) ). Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
422 lines
11 KiB
C
422 lines
11 KiB
C
/* fastlane.c: Driver for Phase5's Fastlane SCSI Controller.
|
|
*
|
|
* Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk)
|
|
*
|
|
* This driver is based on the CyberStorm driver, hence the occasional
|
|
* reference to CyberStorm.
|
|
*
|
|
* Betatesting & crucial adjustments by
|
|
* Patrik Rak (prak3264@ss1000.ms.mff.cuni.cz)
|
|
*
|
|
*/
|
|
|
|
/* TODO:
|
|
*
|
|
* o According to the doc from laire, it is required to reset the DMA when
|
|
* the transfer is done. ATM we reset DMA just before every new
|
|
* dma_init_(read|write).
|
|
*
|
|
* 1) Figure out how to make a cleaner merge with the sparc driver with regard
|
|
* to the caches and the Sparc MMU mapping.
|
|
* 2) Make as few routines required outside the generic driver. A lot of the
|
|
* routines in this file used to be inline!
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/types.h>
|
|
#include <linux/string.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/stat.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#include "scsi.h"
|
|
#include <scsi/scsi_host.h>
|
|
#include "NCR53C9x.h"
|
|
|
|
#include <linux/zorro.h>
|
|
#include <asm/irq.h>
|
|
|
|
#include <asm/amigaints.h>
|
|
#include <asm/amigahw.h>
|
|
|
|
#include <asm/pgtable.h>
|
|
|
|
/* Such day has just come... */
|
|
#if 0
|
|
/* Let this defined unless you really need to enable DMA IRQ one day */
|
|
#define NODMAIRQ
|
|
#endif
|
|
|
|
/* The controller registers can be found in the Z2 config area at these
|
|
* offsets:
|
|
*/
|
|
#define FASTLANE_ESP_ADDR 0x1000001
|
|
#define FASTLANE_DMA_ADDR 0x1000041
|
|
|
|
|
|
/* The Fastlane DMA interface */
|
|
struct fastlane_dma_registers {
|
|
volatile unsigned char cond_reg; /* DMA status (ro) [0x0000] */
|
|
#define ctrl_reg cond_reg /* DMA control (wo) [0x0000] */
|
|
unsigned char dmapad1[0x3f];
|
|
volatile unsigned char clear_strobe; /* DMA clear (wo) [0x0040] */
|
|
};
|
|
|
|
|
|
/* DMA status bits */
|
|
#define FASTLANE_DMA_MINT 0x80
|
|
#define FASTLANE_DMA_IACT 0x40
|
|
#define FASTLANE_DMA_CREQ 0x20
|
|
|
|
/* DMA control bits */
|
|
#define FASTLANE_DMA_FCODE 0xa0
|
|
#define FASTLANE_DMA_MASK 0xf3
|
|
#define FASTLANE_DMA_LED 0x10 /* HD led control 1 = on */
|
|
#define FASTLANE_DMA_WRITE 0x08 /* 1 = write */
|
|
#define FASTLANE_DMA_ENABLE 0x04 /* Enable DMA */
|
|
#define FASTLANE_DMA_EDI 0x02 /* Enable DMA IRQ ? */
|
|
#define FASTLANE_DMA_ESI 0x01 /* Enable SCSI IRQ */
|
|
|
|
static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count);
|
|
static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp);
|
|
static void dma_dump_state(struct NCR_ESP *esp);
|
|
static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length);
|
|
static void dma_init_write(struct NCR_ESP *esp, __u32 vaddr, int length);
|
|
static void dma_ints_off(struct NCR_ESP *esp);
|
|
static void dma_ints_on(struct NCR_ESP *esp);
|
|
static int dma_irq_p(struct NCR_ESP *esp);
|
|
static void dma_irq_exit(struct NCR_ESP *esp);
|
|
static void dma_led_off(struct NCR_ESP *esp);
|
|
static void dma_led_on(struct NCR_ESP *esp);
|
|
static int dma_ports_p(struct NCR_ESP *esp);
|
|
static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write);
|
|
|
|
static unsigned char ctrl_data = 0; /* Keep backup of the stuff written
|
|
* to ctrl_reg. Always write a copy
|
|
* to this register when writing to
|
|
* the hardware register!
|
|
*/
|
|
|
|
static volatile unsigned char cmd_buffer[16];
|
|
/* This is where all commands are put
|
|
* before they are transferred to the ESP chip
|
|
* via PIO.
|
|
*/
|
|
|
|
static inline void dma_clear(struct NCR_ESP *esp)
|
|
{
|
|
struct fastlane_dma_registers *dregs =
|
|
(struct fastlane_dma_registers *) (esp->dregs);
|
|
unsigned long *t;
|
|
|
|
ctrl_data = (ctrl_data & FASTLANE_DMA_MASK);
|
|
dregs->ctrl_reg = ctrl_data;
|
|
|
|
t = (unsigned long *)(esp->edev);
|
|
|
|
dregs->clear_strobe = 0;
|
|
*t = 0 ;
|
|
}
|
|
|
|
/***************************************************************** Detection */
|
|
int __init fastlane_esp_detect(struct scsi_host_template *tpnt)
|
|
{
|
|
struct NCR_ESP *esp;
|
|
struct zorro_dev *z = NULL;
|
|
unsigned long address;
|
|
|
|
if ((z = zorro_find_device(ZORRO_PROD_PHASE5_BLIZZARD_1230_II_FASTLANE_Z3_CYBERSCSI_CYBERSTORM060, z))) {
|
|
unsigned long board = z->resource.start;
|
|
if (request_mem_region(board+FASTLANE_ESP_ADDR,
|
|
sizeof(struct ESP_regs), "NCR53C9x")) {
|
|
/* Check if this is really a fastlane controller. The problem
|
|
* is that also the cyberstorm and blizzard controllers use
|
|
* this ID value. Fortunately only Fastlane maps in Z3 space
|
|
*/
|
|
if (board < 0x1000000) {
|
|
goto err_release;
|
|
}
|
|
esp = esp_allocate(tpnt, (void *)board + FASTLANE_ESP_ADDR, 0);
|
|
|
|
/* Do command transfer with programmed I/O */
|
|
esp->do_pio_cmds = 1;
|
|
|
|
/* Required functions */
|
|
esp->dma_bytes_sent = &dma_bytes_sent;
|
|
esp->dma_can_transfer = &dma_can_transfer;
|
|
esp->dma_dump_state = &dma_dump_state;
|
|
esp->dma_init_read = &dma_init_read;
|
|
esp->dma_init_write = &dma_init_write;
|
|
esp->dma_ints_off = &dma_ints_off;
|
|
esp->dma_ints_on = &dma_ints_on;
|
|
esp->dma_irq_p = &dma_irq_p;
|
|
esp->dma_ports_p = &dma_ports_p;
|
|
esp->dma_setup = &dma_setup;
|
|
|
|
/* Optional functions */
|
|
esp->dma_barrier = 0;
|
|
esp->dma_drain = 0;
|
|
esp->dma_invalidate = 0;
|
|
esp->dma_irq_entry = 0;
|
|
esp->dma_irq_exit = &dma_irq_exit;
|
|
esp->dma_led_on = &dma_led_on;
|
|
esp->dma_led_off = &dma_led_off;
|
|
esp->dma_poll = 0;
|
|
esp->dma_reset = 0;
|
|
|
|
/* Initialize the portBits (enable IRQs) */
|
|
ctrl_data = (FASTLANE_DMA_FCODE |
|
|
#ifndef NODMAIRQ
|
|
FASTLANE_DMA_EDI |
|
|
#endif
|
|
FASTLANE_DMA_ESI);
|
|
|
|
|
|
/* SCSI chip clock */
|
|
esp->cfreq = 40000000;
|
|
|
|
|
|
/* Map the physical address space into virtual kernel space */
|
|
address = (unsigned long)
|
|
z_ioremap(board, z->resource.end-board+1);
|
|
|
|
if(!address){
|
|
printk("Could not remap Fastlane controller memory!");
|
|
goto err_unregister;
|
|
}
|
|
|
|
|
|
/* The DMA registers on the Fastlane are mapped
|
|
* relative to the device (i.e. in the same Zorro
|
|
* I/O block).
|
|
*/
|
|
esp->dregs = (void *)(address + FASTLANE_DMA_ADDR);
|
|
|
|
/* ESP register base */
|
|
esp->eregs = (struct ESP_regs *)(address + FASTLANE_ESP_ADDR);
|
|
|
|
/* Board base */
|
|
esp->edev = (void *) address;
|
|
|
|
/* Set the command buffer */
|
|
esp->esp_command = cmd_buffer;
|
|
esp->esp_command_dvma = virt_to_bus((void *)cmd_buffer);
|
|
|
|
esp->irq = IRQ_AMIGA_PORTS;
|
|
esp->slot = board+FASTLANE_ESP_ADDR;
|
|
if (request_irq(IRQ_AMIGA_PORTS, esp_intr, IRQF_SHARED,
|
|
"Fastlane SCSI", esp->ehost)) {
|
|
printk(KERN_WARNING "Fastlane: Could not get IRQ%d, aborting.\n", IRQ_AMIGA_PORTS);
|
|
goto err_unmap;
|
|
}
|
|
|
|
/* Controller ID */
|
|
esp->scsi_id = 7;
|
|
|
|
/* We don't have a differential SCSI-bus. */
|
|
esp->diff = 0;
|
|
|
|
dma_clear(esp);
|
|
esp_initialize(esp);
|
|
|
|
printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, esps_in_use);
|
|
esps_running = esps_in_use;
|
|
return esps_in_use;
|
|
}
|
|
}
|
|
return 0;
|
|
|
|
err_unmap:
|
|
z_iounmap((void *)address);
|
|
err_unregister:
|
|
scsi_unregister (esp->ehost);
|
|
err_release:
|
|
release_mem_region(z->resource.start+FASTLANE_ESP_ADDR,
|
|
sizeof(struct ESP_regs));
|
|
return 0;
|
|
}
|
|
|
|
|
|
/************************************************************* DMA Functions */
|
|
static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count)
|
|
{
|
|
/* Since the Fastlane DMA is fully dedicated to the ESP chip,
|
|
* the number of bytes sent (to the ESP chip) equals the number
|
|
* of bytes in the FIFO - there is no buffering in the DMA controller.
|
|
* XXXX Do I read this right? It is from host to ESP, right?
|
|
*/
|
|
return fifo_count;
|
|
}
|
|
|
|
static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp)
|
|
{
|
|
unsigned long sz = sp->SCp.this_residual;
|
|
if(sz > 0xfffc)
|
|
sz = 0xfffc;
|
|
return sz;
|
|
}
|
|
|
|
static void dma_dump_state(struct NCR_ESP *esp)
|
|
{
|
|
ESPLOG(("esp%d: dma -- cond_reg<%02x>\n",
|
|
esp->esp_id, ((struct fastlane_dma_registers *)
|
|
(esp->dregs))->cond_reg));
|
|
ESPLOG(("intreq:<%04x>, intena:<%04x>\n",
|
|
amiga_custom.intreqr, amiga_custom.intenar));
|
|
}
|
|
|
|
static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length)
|
|
{
|
|
struct fastlane_dma_registers *dregs =
|
|
(struct fastlane_dma_registers *) (esp->dregs);
|
|
unsigned long *t;
|
|
|
|
cache_clear(addr, length);
|
|
|
|
dma_clear(esp);
|
|
|
|
t = (unsigned long *)((addr & 0x00ffffff) + esp->edev);
|
|
|
|
dregs->clear_strobe = 0;
|
|
*t = addr;
|
|
|
|
ctrl_data = (ctrl_data & FASTLANE_DMA_MASK) | FASTLANE_DMA_ENABLE;
|
|
dregs->ctrl_reg = ctrl_data;
|
|
}
|
|
|
|
static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length)
|
|
{
|
|
struct fastlane_dma_registers *dregs =
|
|
(struct fastlane_dma_registers *) (esp->dregs);
|
|
unsigned long *t;
|
|
|
|
cache_push(addr, length);
|
|
|
|
dma_clear(esp);
|
|
|
|
t = (unsigned long *)((addr & 0x00ffffff) + (esp->edev));
|
|
|
|
dregs->clear_strobe = 0;
|
|
*t = addr;
|
|
|
|
ctrl_data = ((ctrl_data & FASTLANE_DMA_MASK) |
|
|
FASTLANE_DMA_ENABLE |
|
|
FASTLANE_DMA_WRITE);
|
|
dregs->ctrl_reg = ctrl_data;
|
|
}
|
|
|
|
|
|
static void dma_ints_off(struct NCR_ESP *esp)
|
|
{
|
|
disable_irq(esp->irq);
|
|
}
|
|
|
|
static void dma_ints_on(struct NCR_ESP *esp)
|
|
{
|
|
enable_irq(esp->irq);
|
|
}
|
|
|
|
static void dma_irq_exit(struct NCR_ESP *esp)
|
|
{
|
|
struct fastlane_dma_registers *dregs =
|
|
(struct fastlane_dma_registers *) (esp->dregs);
|
|
|
|
dregs->ctrl_reg = ctrl_data & ~(FASTLANE_DMA_EDI|FASTLANE_DMA_ESI);
|
|
#ifdef __mc68000__
|
|
nop();
|
|
#endif
|
|
dregs->ctrl_reg = ctrl_data;
|
|
}
|
|
|
|
static int dma_irq_p(struct NCR_ESP *esp)
|
|
{
|
|
struct fastlane_dma_registers *dregs =
|
|
(struct fastlane_dma_registers *) (esp->dregs);
|
|
unsigned char dma_status;
|
|
|
|
dma_status = dregs->cond_reg;
|
|
|
|
if(dma_status & FASTLANE_DMA_IACT)
|
|
return 0; /* not our IRQ */
|
|
|
|
/* Return non-zero if ESP requested IRQ */
|
|
return (
|
|
#ifndef NODMAIRQ
|
|
(dma_status & FASTLANE_DMA_CREQ) &&
|
|
#endif
|
|
(!(dma_status & FASTLANE_DMA_MINT)) &&
|
|
(esp_read(((struct ESP_regs *) (esp->eregs))->esp_status) & ESP_STAT_INTR));
|
|
}
|
|
|
|
static void dma_led_off(struct NCR_ESP *esp)
|
|
{
|
|
ctrl_data &= ~FASTLANE_DMA_LED;
|
|
((struct fastlane_dma_registers *)(esp->dregs))->ctrl_reg = ctrl_data;
|
|
}
|
|
|
|
static void dma_led_on(struct NCR_ESP *esp)
|
|
{
|
|
ctrl_data |= FASTLANE_DMA_LED;
|
|
((struct fastlane_dma_registers *)(esp->dregs))->ctrl_reg = ctrl_data;
|
|
}
|
|
|
|
static int dma_ports_p(struct NCR_ESP *esp)
|
|
{
|
|
return ((amiga_custom.intenar) & IF_PORTS);
|
|
}
|
|
|
|
static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write)
|
|
{
|
|
/* On the Sparc, DMA_ST_WRITE means "move data from device to memory"
|
|
* so when (write) is true, it actually means READ!
|
|
*/
|
|
if(write){
|
|
dma_init_read(esp, addr, count);
|
|
} else {
|
|
dma_init_write(esp, addr, count);
|
|
}
|
|
}
|
|
|
|
#define HOSTS_C
|
|
|
|
int fastlane_esp_release(struct Scsi_Host *instance)
|
|
{
|
|
#ifdef MODULE
|
|
unsigned long address = (unsigned long)((struct NCR_ESP *)instance->hostdata)->edev;
|
|
esp_deallocate((struct NCR_ESP *)instance->hostdata);
|
|
esp_release();
|
|
release_mem_region(address, sizeof(struct ESP_regs));
|
|
free_irq(IRQ_AMIGA_PORTS, esp_intr);
|
|
#endif
|
|
return 1;
|
|
}
|
|
|
|
|
|
static struct scsi_host_template driver_template = {
|
|
.proc_name = "esp-fastlane",
|
|
.proc_info = esp_proc_info,
|
|
.name = "Fastlane SCSI",
|
|
.detect = fastlane_esp_detect,
|
|
.slave_alloc = esp_slave_alloc,
|
|
.slave_destroy = esp_slave_destroy,
|
|
.release = fastlane_esp_release,
|
|
.queuecommand = esp_queue,
|
|
.eh_abort_handler = esp_abort,
|
|
.eh_bus_reset_handler = esp_reset,
|
|
.can_queue = 7,
|
|
.this_id = 7,
|
|
.sg_tablesize = SG_ALL,
|
|
.cmd_per_lun = 1,
|
|
.use_clustering = ENABLE_CLUSTERING
|
|
};
|
|
|
|
#include "scsi_module.c"
|
|
|
|
MODULE_LICENSE("GPL");
|