mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 05:16:43 +07:00
25498e5b3d
* 'next/driver' of git://git.linaro.org/people/arnd/arm-soc: hw_random: add driver for atmel true hardware random number generator ARM: at91: at91sam9g45: add trng clock and platform device MX53 Enable the AHCI SATA on MX53 SMD board MX53 Enable the AHCI SATA on MX53 LOCO board MX53 Enable the AHCI SATA on MX53 ARD board AHCI Add the AHCI SATA feature on the MX53 platforms Fix pata imx resource ARM: imx: Define functions for registering PATA ARM: imx: Add PATA clock support ARM: imx: Add PATA resources for other i.MX processors imx: efika: Enable pata. imx51: add pata clock imx51: add pata device Fix up trivial conflict (new selects next to each other from separate branches for EFIKA_COMMON) in arch/arm/mach-mx5/Kconfig
261 lines
7.1 KiB
C
261 lines
7.1 KiB
C
/*
|
|
* Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
*/
|
|
|
|
/*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/smsc911x.h>
|
|
|
|
#include <mach/common.h>
|
|
#include <mach/hardware.h>
|
|
#include <mach/iomux-mx53.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/time.h>
|
|
|
|
#include "crm_regs.h"
|
|
#include "devices-imx53.h"
|
|
|
|
#define ARD_ETHERNET_INT_B IMX_GPIO_NR(2, 31)
|
|
#define ARD_SD1_CD IMX_GPIO_NR(1, 1)
|
|
#define ARD_SD1_WP IMX_GPIO_NR(1, 9)
|
|
#define ARD_I2CPORTEXP_B IMX_GPIO_NR(2, 3)
|
|
#define ARD_VOLUMEDOWN IMX_GPIO_NR(4, 0)
|
|
#define ARD_HOME IMX_GPIO_NR(5, 10)
|
|
#define ARD_BACK IMX_GPIO_NR(5, 11)
|
|
#define ARD_PROG IMX_GPIO_NR(5, 12)
|
|
#define ARD_VOLUMEUP IMX_GPIO_NR(5, 13)
|
|
|
|
static iomux_v3_cfg_t mx53_ard_pads[] = {
|
|
/* UART1 */
|
|
MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
|
|
MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
|
|
/* WEIM for CS1 */
|
|
MX53_PAD_EIM_EB3__GPIO2_31, /* ETHERNET_INT_B */
|
|
MX53_PAD_EIM_D16__EMI_WEIM_D_16,
|
|
MX53_PAD_EIM_D17__EMI_WEIM_D_17,
|
|
MX53_PAD_EIM_D18__EMI_WEIM_D_18,
|
|
MX53_PAD_EIM_D19__EMI_WEIM_D_19,
|
|
MX53_PAD_EIM_D20__EMI_WEIM_D_20,
|
|
MX53_PAD_EIM_D21__EMI_WEIM_D_21,
|
|
MX53_PAD_EIM_D22__EMI_WEIM_D_22,
|
|
MX53_PAD_EIM_D23__EMI_WEIM_D_23,
|
|
MX53_PAD_EIM_D24__EMI_WEIM_D_24,
|
|
MX53_PAD_EIM_D25__EMI_WEIM_D_25,
|
|
MX53_PAD_EIM_D26__EMI_WEIM_D_26,
|
|
MX53_PAD_EIM_D27__EMI_WEIM_D_27,
|
|
MX53_PAD_EIM_D28__EMI_WEIM_D_28,
|
|
MX53_PAD_EIM_D29__EMI_WEIM_D_29,
|
|
MX53_PAD_EIM_D30__EMI_WEIM_D_30,
|
|
MX53_PAD_EIM_D31__EMI_WEIM_D_31,
|
|
MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0,
|
|
MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1,
|
|
MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2,
|
|
MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3,
|
|
MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4,
|
|
MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5,
|
|
MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6,
|
|
MX53_PAD_EIM_OE__EMI_WEIM_OE,
|
|
MX53_PAD_EIM_RW__EMI_WEIM_RW,
|
|
MX53_PAD_EIM_CS1__EMI_WEIM_CS_1,
|
|
/* SDHC1 */
|
|
MX53_PAD_SD1_CMD__ESDHC1_CMD,
|
|
MX53_PAD_SD1_CLK__ESDHC1_CLK,
|
|
MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
|
|
MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
|
|
MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
|
|
MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
|
|
MX53_PAD_PATA_DATA8__ESDHC1_DAT4,
|
|
MX53_PAD_PATA_DATA9__ESDHC1_DAT5,
|
|
MX53_PAD_PATA_DATA10__ESDHC1_DAT6,
|
|
MX53_PAD_PATA_DATA11__ESDHC1_DAT7,
|
|
MX53_PAD_GPIO_1__GPIO1_1,
|
|
MX53_PAD_GPIO_9__GPIO1_9,
|
|
/* I2C2 */
|
|
MX53_PAD_EIM_EB2__I2C2_SCL,
|
|
MX53_PAD_KEY_ROW3__I2C2_SDA,
|
|
/* I2C3 */
|
|
MX53_PAD_GPIO_3__I2C3_SCL,
|
|
MX53_PAD_GPIO_16__I2C3_SDA,
|
|
/* GPIO */
|
|
MX53_PAD_DISP0_DAT16__GPIO5_10, /* home */
|
|
MX53_PAD_DISP0_DAT17__GPIO5_11, /* back */
|
|
MX53_PAD_DISP0_DAT18__GPIO5_12, /* prog */
|
|
MX53_PAD_DISP0_DAT19__GPIO5_13, /* vol up */
|
|
MX53_PAD_GPIO_10__GPIO4_0, /* vol down */
|
|
};
|
|
|
|
#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \
|
|
{ \
|
|
.gpio = gpio_num, \
|
|
.type = EV_KEY, \
|
|
.code = ev_code, \
|
|
.active_low = act_low, \
|
|
.desc = "btn " descr, \
|
|
.wakeup = wake, \
|
|
}
|
|
|
|
static struct gpio_keys_button ard_buttons[] = {
|
|
GPIO_BUTTON(ARD_HOME, KEY_HOME, 1, "home", 0),
|
|
GPIO_BUTTON(ARD_BACK, KEY_BACK, 1, "back", 0),
|
|
GPIO_BUTTON(ARD_PROG, KEY_PROGRAM, 1, "program", 0),
|
|
GPIO_BUTTON(ARD_VOLUMEUP, KEY_VOLUMEUP, 1, "volume-up", 0),
|
|
GPIO_BUTTON(ARD_VOLUMEDOWN, KEY_VOLUMEDOWN, 1, "volume-down", 0),
|
|
};
|
|
|
|
static const struct gpio_keys_platform_data ard_button_data __initconst = {
|
|
.buttons = ard_buttons,
|
|
.nbuttons = ARRAY_SIZE(ard_buttons),
|
|
};
|
|
|
|
static struct resource ard_smsc911x_resources[] = {
|
|
{
|
|
.start = MX53_CS1_64MB_BASE_ADDR,
|
|
.end = MX53_CS1_64MB_BASE_ADDR + SZ_32M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
|
|
.end = IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
struct smsc911x_platform_config ard_smsc911x_config = {
|
|
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
|
|
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
|
|
.flags = SMSC911X_USE_32BIT,
|
|
};
|
|
|
|
static struct platform_device ard_smsc_lan9220_device = {
|
|
.name = "smsc911x",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(ard_smsc911x_resources),
|
|
.resource = ard_smsc911x_resources,
|
|
.dev = {
|
|
.platform_data = &ard_smsc911x_config,
|
|
},
|
|
};
|
|
|
|
static const struct esdhc_platform_data mx53_ard_sd1_data __initconst = {
|
|
.cd_gpio = ARD_SD1_CD,
|
|
.wp_gpio = ARD_SD1_WP,
|
|
};
|
|
|
|
static struct imxi2c_platform_data mx53_ard_i2c2_data = {
|
|
.bitrate = 50000,
|
|
};
|
|
|
|
static struct imxi2c_platform_data mx53_ard_i2c3_data = {
|
|
.bitrate = 400000,
|
|
};
|
|
|
|
static void __init mx53_ard_io_init(void)
|
|
{
|
|
gpio_request(ARD_ETHERNET_INT_B, "eth-int-b");
|
|
gpio_direction_input(ARD_ETHERNET_INT_B);
|
|
|
|
gpio_request(ARD_I2CPORTEXP_B, "i2cptexp-rst");
|
|
gpio_direction_output(ARD_I2CPORTEXP_B, 1);
|
|
}
|
|
|
|
/* Config CS1 settings for ethernet controller */
|
|
static int weim_cs_config(void)
|
|
{
|
|
u32 reg;
|
|
void __iomem *weim_base, *iomuxc_base;
|
|
|
|
weim_base = ioremap(MX53_WEIM_BASE_ADDR, SZ_4K);
|
|
if (!weim_base)
|
|
return -ENOMEM;
|
|
|
|
iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K);
|
|
if (!iomuxc_base)
|
|
return -ENOMEM;
|
|
|
|
/* CS1 timings for LAN9220 */
|
|
writel(0x20001, (weim_base + 0x18));
|
|
writel(0x0, (weim_base + 0x1C));
|
|
writel(0x16000202, (weim_base + 0x20));
|
|
writel(0x00000002, (weim_base + 0x24));
|
|
writel(0x16002082, (weim_base + 0x28));
|
|
writel(0x00000000, (weim_base + 0x2C));
|
|
writel(0x00000000, (weim_base + 0x90));
|
|
|
|
/* specify 64 MB on CS1 and CS0 on GPR1 */
|
|
reg = readl(iomuxc_base + 0x4);
|
|
reg &= ~0x3F;
|
|
reg |= 0x1B;
|
|
writel(reg, (iomuxc_base + 0x4));
|
|
|
|
iounmap(iomuxc_base);
|
|
iounmap(weim_base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void __init imx53_ard_common_init(void)
|
|
{
|
|
mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads,
|
|
ARRAY_SIZE(mx53_ard_pads));
|
|
weim_cs_config();
|
|
}
|
|
|
|
static struct platform_device *devices[] __initdata = {
|
|
&ard_smsc_lan9220_device,
|
|
};
|
|
|
|
static void __init mx53_ard_board_init(void)
|
|
{
|
|
imx53_soc_init();
|
|
imx53_add_imx_uart(0, NULL);
|
|
|
|
imx53_ard_common_init();
|
|
mx53_ard_io_init();
|
|
platform_add_devices(devices, ARRAY_SIZE(devices));
|
|
|
|
imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data);
|
|
imx53_add_imx2_wdt(0, NULL);
|
|
imx53_add_imx_i2c(1, &mx53_ard_i2c2_data);
|
|
imx53_add_imx_i2c(2, &mx53_ard_i2c3_data);
|
|
imx_add_gpio_keys(&ard_button_data);
|
|
imx53_add_ahci_imx();
|
|
}
|
|
|
|
static void __init mx53_ard_timer_init(void)
|
|
{
|
|
mx53_clocks_init(32768, 24000000, 22579200, 0);
|
|
}
|
|
|
|
static struct sys_timer mx53_ard_timer = {
|
|
.init = mx53_ard_timer_init,
|
|
};
|
|
|
|
MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board")
|
|
.map_io = mx53_map_io,
|
|
.init_early = imx53_init_early,
|
|
.init_irq = mx53_init_irq,
|
|
.handle_irq = imx53_handle_irq,
|
|
.timer = &mx53_ard_timer,
|
|
.init_machine = mx53_ard_board_init,
|
|
MACHINE_END
|