linux_dsm_epyc7002/arch/arm/mach-mmp/devices.c
Arnd Bergmann 3524080826 ARM: mmp: allow platform devices with modular USB
The USB host drivers need platform data to be defined on
pxa168 and pxa910, but the conditionals used in the devices.c
file only work if the drivers are built-in. This patch
fixes the definition by changing the #ifdef to #if IS_ENABLED(),
which works both for built-in and modular Kconfig symbols.

I found one specific problem using 'randconfig' builds, but
for consistency, this patch uses IS_ENABLED() for all Kconfig
symbols in these three files.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2014-03-18 16:03:44 +01:00

352 lines
8.2 KiB
C

/*
* linux/arch/arm/mach-mmp/devices.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <asm/irq.h>
#include <mach/irqs.h>
#include <mach/devices.h>
#include <mach/cputype.h>
#include <mach/regs-usb.h>
int __init pxa_register_device(struct pxa_device_desc *desc,
void *data, size_t size)
{
struct platform_device *pdev;
struct resource res[2 + MAX_RESOURCE_DMA];
int i, ret = 0, nres = 0;
pdev = platform_device_alloc(desc->drv_name, desc->id);
if (pdev == NULL)
return -ENOMEM;
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
memset(res, 0, sizeof(res));
if (desc->start != -1ul && desc->size > 0) {
res[nres].start = desc->start;
res[nres].end = desc->start + desc->size - 1;
res[nres].flags = IORESOURCE_MEM;
nres++;
}
if (desc->irq != NO_IRQ) {
res[nres].start = desc->irq;
res[nres].end = desc->irq;
res[nres].flags = IORESOURCE_IRQ;
nres++;
}
for (i = 0; i < MAX_RESOURCE_DMA; i++, nres++) {
if (desc->dma[i] == 0)
break;
res[nres].start = desc->dma[i];
res[nres].end = desc->dma[i];
res[nres].flags = IORESOURCE_DMA;
}
ret = platform_device_add_resources(pdev, res, nres);
if (ret) {
platform_device_put(pdev);
return ret;
}
if (data && size) {
ret = platform_device_add_data(pdev, data, size);
if (ret) {
platform_device_put(pdev);
return ret;
}
}
return platform_device_add(pdev);
}
#if IS_ENABLED(CONFIG_USB) || IS_ENABLED(CONFIG_USB_GADGET)
/*****************************************************************************
* The registers read/write routines
*****************************************************************************/
static unsigned int u2o_get(void __iomem *base, unsigned int offset)
{
return readl_relaxed(base + offset);
}
static void u2o_set(void __iomem *base, unsigned int offset,
unsigned int value)
{
u32 reg;
reg = readl_relaxed(base + offset);
reg |= value;
writel_relaxed(reg, base + offset);
readl_relaxed(base + offset);
}
static void u2o_clear(void __iomem *base, unsigned int offset,
unsigned int value)
{
u32 reg;
reg = readl_relaxed(base + offset);
reg &= ~value;
writel_relaxed(reg, base + offset);
readl_relaxed(base + offset);
}
static void u2o_write(void __iomem *base, unsigned int offset,
unsigned int value)
{
writel_relaxed(value, base + offset);
readl_relaxed(base + offset);
}
#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV)
#if IS_ENABLED(CONFIG_CPU_PXA910) || IS_ENABLED(CONFIG_CPU_PXA168)
static DEFINE_MUTEX(phy_lock);
static int phy_init_cnt;
static int usb_phy_init_internal(void __iomem *base)
{
int loops;
pr_info("Init usb phy!!!\n");
/* Initialize the USB PHY power */
if (cpu_is_pxa910()) {
u2o_set(base, UTMI_CTRL, (1<<UTMI_CTRL_INPKT_DELAY_SOF_SHIFT)
| (1<<UTMI_CTRL_PU_REF_SHIFT));
}
u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
/* UTMI_PLL settings */
u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK
| UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK
| UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK
| UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK);
u2o_set(base, UTMI_PLL, 0xee<<UTMI_PLL_FBDIV_SHIFT
| 0xb<<UTMI_PLL_REFDIV_SHIFT | 3<<UTMI_PLL_PLLVDD18_SHIFT
| 3<<UTMI_PLL_PLLVDD12_SHIFT | 3<<UTMI_PLL_PLLCALI12_SHIFT
| 1<<UTMI_PLL_ICP_SHIFT | 3<<UTMI_PLL_KVCO_SHIFT);
/* UTMI_TX */
u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK
| UTMI_TX_TXVDD12_MASK | UTMI_TX_CK60_PHSEL_MASK
| UTMI_TX_IMPCAL_VTH_MASK | UTMI_TX_REG_EXT_FS_RCAL_MASK
| UTMI_TX_AMP_MASK);
u2o_set(base, UTMI_TX, 3<<UTMI_TX_TXVDD12_SHIFT
| 4<<UTMI_TX_CK60_PHSEL_SHIFT | 4<<UTMI_TX_IMPCAL_VTH_SHIFT
| 8<<UTMI_TX_REG_EXT_FS_RCAL_SHIFT | 3<<UTMI_TX_AMP_SHIFT);
/* UTMI_RX */
u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK
| UTMI_REG_SQ_LENGTH_MASK);
u2o_set(base, UTMI_RX, 7<<UTMI_RX_SQ_THRESH_SHIFT
| 2<<UTMI_REG_SQ_LENGTH_SHIFT);
/* UTMI_IVREF */
if (cpu_is_pxa168())
/* fixing Microsoft Altair board interface with NEC hub issue -
* Set UTMI_IVREF from 0x4a3 to 0x4bf */
u2o_write(base, UTMI_IVREF, 0x4bf);
/* toggle VCOCAL_START bit of UTMI_PLL */
udelay(200);
u2o_set(base, UTMI_PLL, VCOCAL_START);
udelay(40);
u2o_clear(base, UTMI_PLL, VCOCAL_START);
/* toggle REG_RCAL_START bit of UTMI_TX */
udelay(400);
u2o_set(base, UTMI_TX, REG_RCAL_START);
udelay(40);
u2o_clear(base, UTMI_TX, REG_RCAL_START);
udelay(400);
/* Make sure PHY PLL is ready */
loops = 0;
while ((u2o_get(base, UTMI_PLL) & PLL_READY) == 0) {
mdelay(1);
loops++;
if (loops > 100) {
printk(KERN_WARNING "calibrate timeout, UTMI_PLL %x\n",
u2o_get(base, UTMI_PLL));
break;
}
}
if (cpu_is_pxa168()) {
u2o_set(base, UTMI_RESERVE, 1 << 5);
/* Turn on UTMI PHY OTG extension */
u2o_write(base, UTMI_OTG_ADDON, 1);
}
return 0;
}
static int usb_phy_deinit_internal(void __iomem *base)
{
pr_info("Deinit usb phy!!!\n");
if (cpu_is_pxa168())
u2o_clear(base, UTMI_OTG_ADDON, UTMI_OTG_ADDON_OTG_ON);
u2o_clear(base, UTMI_CTRL, UTMI_CTRL_RXBUF_PDWN);
u2o_clear(base, UTMI_CTRL, UTMI_CTRL_TXBUF_PDWN);
u2o_clear(base, UTMI_CTRL, UTMI_CTRL_USB_CLK_EN);
u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
return 0;
}
int pxa_usb_phy_init(void __iomem *phy_reg)
{
mutex_lock(&phy_lock);
if (phy_init_cnt++ == 0)
usb_phy_init_internal(phy_reg);
mutex_unlock(&phy_lock);
return 0;
}
void pxa_usb_phy_deinit(void __iomem *phy_reg)
{
WARN_ON(phy_init_cnt == 0);
mutex_lock(&phy_lock);
if (--phy_init_cnt == 0)
usb_phy_deinit_internal(phy_reg);
mutex_unlock(&phy_lock);
}
#endif
#endif
#endif
#if IS_ENABLED(CONFIG_USB_SUPPORT)
static u64 usb_dma_mask = ~(u32)0;
#if IS_ENABLED(CONFIG_USB_MV_UDC)
struct resource pxa168_u2o_resources[] = {
/* regbase */
[0] = {
.start = PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
.end = PXA168_U2O_REGBASE + USB_REG_RANGE,
.flags = IORESOURCE_MEM,
.name = "capregs",
},
/* phybase */
[1] = {
.start = PXA168_U2O_PHYBASE,
.end = PXA168_U2O_PHYBASE + USB_PHY_RANGE,
.flags = IORESOURCE_MEM,
.name = "phyregs",
},
[2] = {
.start = IRQ_PXA168_USB1,
.end = IRQ_PXA168_USB1,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa168_device_u2o = {
.name = "mv-udc",
.id = -1,
.resource = pxa168_u2o_resources,
.num_resources = ARRAY_SIZE(pxa168_u2o_resources),
.dev = {
.dma_mask = &usb_dma_mask,
.coherent_dma_mask = 0xffffffff,
}
};
#endif /* CONFIG_USB_MV_UDC */
#if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
struct resource pxa168_u2oehci_resources[] = {
/* regbase */
[0] = {
.start = PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
.end = PXA168_U2O_REGBASE + USB_REG_RANGE,
.flags = IORESOURCE_MEM,
.name = "capregs",
},
/* phybase */
[1] = {
.start = PXA168_U2O_PHYBASE,
.end = PXA168_U2O_PHYBASE + USB_PHY_RANGE,
.flags = IORESOURCE_MEM,
.name = "phyregs",
},
[2] = {
.start = IRQ_PXA168_USB1,
.end = IRQ_PXA168_USB1,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa168_device_u2oehci = {
.name = "pxa-u2oehci",
.id = -1,
.dev = {
.dma_mask = &usb_dma_mask,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(pxa168_u2oehci_resources),
.resource = pxa168_u2oehci_resources,
};
#endif
#if IS_ENABLED(CONFIG_USB_MV_OTG)
struct resource pxa168_u2ootg_resources[] = {
/* regbase */
[0] = {
.start = PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
.end = PXA168_U2O_REGBASE + USB_REG_RANGE,
.flags = IORESOURCE_MEM,
.name = "capregs",
},
/* phybase */
[1] = {
.start = PXA168_U2O_PHYBASE,
.end = PXA168_U2O_PHYBASE + USB_PHY_RANGE,
.flags = IORESOURCE_MEM,
.name = "phyregs",
},
[2] = {
.start = IRQ_PXA168_USB1,
.end = IRQ_PXA168_USB1,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa168_device_u2ootg = {
.name = "mv-otg",
.id = -1,
.dev = {
.dma_mask = &usb_dma_mask,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(pxa168_u2ootg_resources),
.resource = pxa168_u2ootg_resources,
};
#endif /* CONFIG_USB_MV_OTG */
#endif