AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-04 05:26:47 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
26b2da5ae5
linux_dsm_epyc7002/arch/arm/mach-mxs/mach-mxs.c
Marek Vasut 6a15075ece ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0 
The issue fixed by this patch manifests only then using X11
with mxsfb driver. The X11 will display either shifted image
or otherwise distorted image on the LCD.

The problem is that the X11 tries to reconfigure the framebuffer
and along the way calls fb_ops.fb_set_par() with X11's desired
configuration values. The field of particular interest is
fb_info->var.sync which contains non-standard values if
configured by kernel. These are either FB_SYNC_DATA_ENABLE_HIGH_ACT,
FB_SYNC_DOTCLK_FAILING_ACT or both, depending on the platform
configuration. Both of these values are defined in the
include/linux/mxsfb.h file.

The driver interprets these values and configures the LCD controller
accordingly. Yet X11 only has access to the standard values for this
field defined in include/uapi/linux/fb.h and thus, unlike kernel,
omits these special values. This results in distorted image on the
LCD.

This patch moves these non-standard values into new field of the
mxsfb_platform_data structure so the driver can in turn check this
field instead of the video mode field for these specific portions.

Moreover, this patch prefixes these values with MXSFB_SYNC_ prefix
instead of FB_SYNC_ prefix to prevent confusion of subsequent users.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Linux ARM <linux-arm-kernel@lists.infradead.org>
Cc: Linux FBDEV <linux-fbdev@vger.kernel.org>
Cc: Lothar Waßmann <LW@karo-electronics.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-19 11:07:58 +08:00

486 lines
12 KiB
C
Raw Blame History

/*
* Copyright 2012 Freescale Semiconductor, Inc.
* Copyright 2012 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/can/platform/flexcan.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/micrel_phy.h>
#include <linux/mxsfb.h>
#include <linux/of_platform.h>
#include <linux/phy.h>
#include <linux/pinctrl/consumer.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/common.h>
#include <mach/digctl.h>
#include <mach/mxs.h>
static struct fb_videomode mx23evk_video_modes[] = {
{
.name = "Samsung-LMS430HF02",
.refresh = 60,
.xres = 480,
.yres = 272,
.pixclock = 108096, /* picosecond (9.2 MHz) */
.left_margin = 15,
.right_margin = 8,
.upper_margin = 12,
.lower_margin = 4,
.hsync_len = 1,
.vsync_len = 1,
},
};
static struct fb_videomode mx28evk_video_modes[] = {
{
.name = "Seiko-43WVF1G",
.refresh = 60,
.xres = 800,
.yres = 480,
.pixclock = 29851, /* picosecond (33.5 MHz) */
.left_margin = 89,
.right_margin = 164,
.upper_margin = 23,
.lower_margin = 10,
.hsync_len = 10,
.vsync_len = 10,
},
};
static struct fb_videomode m28evk_video_modes[] = {
{
.name = "Ampire AM-800480R2TMQW-T01H",
.refresh = 60,
.xres = 800,
.yres = 480,
.pixclock = 30066, /* picosecond (33.26 MHz) */
.left_margin = 0,
.right_margin = 256,
.upper_margin = 0,
.lower_margin = 45,
.hsync_len = 1,
.vsync_len = 1,
},
};
static struct fb_videomode apx4devkit_video_modes[] = {
{
.name = "HannStar PJ70112A",
.refresh = 60,
.xres = 800,
.yres = 480,
.pixclock = 33333, /* picosecond (30.00 MHz) */
.left_margin = 88,
.right_margin = 40,
.upper_margin = 32,
.lower_margin = 13,
.hsync_len = 48,
.vsync_len = 3,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
},
};
static struct fb_videomode apf28dev_video_modes[] = {
{
.name = "LW700",
.refresh = 60,
.xres = 800,
.yres = 480,
.pixclock = 30303, /* picosecond */
.left_margin = 96,
.right_margin = 96, /* at least 3 & 1 */
.upper_margin = 0x14,
.lower_margin = 0x15,
.hsync_len = 64,
.vsync_len = 4,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
},
};
static struct fb_videomode cfa10049_video_modes[] = {
{
.name = "Himax HX8357-B",
.refresh = 60,
.xres = 320,
.yres = 480,
.pixclock = 108506, /* picosecond (9.216 MHz) */
.left_margin = 2,
.right_margin = 2,
.upper_margin = 2,
.lower_margin = 2,
.hsync_len = 15,
.vsync_len = 15,
},
};
static struct mxsfb_platform_data mxsfb_pdata __initdata;
/*
* MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers
*/
#define MX28EVK_FLEXCAN_SWITCH MXS_GPIO_NR(2, 13)
static int flexcan0_en, flexcan1_en;
static void mx28evk_flexcan_switch(void)
{
if (flexcan0_en || flexcan1_en)
gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 1);
else
gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 0);
}
static void mx28evk_flexcan0_switch(int enable)
{
flexcan0_en = enable;
mx28evk_flexcan_switch();
}
static void mx28evk_flexcan1_switch(int enable)
{
flexcan1_en = enable;
mx28evk_flexcan_switch();
}
static struct flexcan_platform_data flexcan_pdata[2];
static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("fsl,imx23-lcdif", 0x80030000, NULL, &mxsfb_pdata),
OF_DEV_AUXDATA("fsl,imx28-lcdif", 0x80030000, NULL, &mxsfb_pdata),
OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80032000, NULL, &flexcan_pdata[0]),
OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80034000, NULL, &flexcan_pdata[1]),
{ /* sentinel */ }
};
static void __init imx23_timer_init(void)
{
mx23_clocks_init();
}
static void __init imx28_timer_init(void)
{
mx28_clocks_init();
}
enum mac_oui {
OUI_FSL,
OUI_DENX,
OUI_CRYSTALFONTZ,
};
static void __init update_fec_mac_prop(enum mac_oui oui)
{
struct device_node *np, *from = NULL;
struct property *newmac;
const u32 *ocotp = mxs_get_ocotp();
u8 *macaddr;
u32 val;
int i;
for (i = 0; i < 2; i++) {
np = of_find_compatible_node(from, NULL, "fsl,imx28-fec");
if (!np)
return;
from = np;
if (of_get_property(np, "local-mac-address", NULL))
continue;
newmac = kzalloc(sizeof(*newmac) + 6, GFP_KERNEL);
if (!newmac)
return;
newmac->value = newmac + 1;
newmac->length = 6;
newmac->name = kstrdup("local-mac-address", GFP_KERNEL);
if (!newmac->name) {
kfree(newmac);
return;
}
/*
* OCOTP only stores the last 4 octets for each mac address,
* so hard-code OUI here.
*/
macaddr = newmac->value;
switch (oui) {
case OUI_FSL:
macaddr[0] = 0x00;
macaddr[1] = 0x04;
macaddr[2] = 0x9f;
break;
case OUI_DENX:
macaddr[0] = 0xc0;
macaddr[1] = 0xe5;
macaddr[2] = 0x4e;
break;
case OUI_CRYSTALFONTZ:
macaddr[0] = 0x58;
macaddr[1] = 0xb9;
macaddr[2] = 0xe1;
break;
}
val = ocotp[i];
macaddr[3] = (val >> 16) & 0xff;
macaddr[4] = (val >> 8) & 0xff;
macaddr[5] = (val >> 0) & 0xff;
of_update_property(np, newmac);
}
}
static void __init imx23_evk_init(void)
{
mxsfb_pdata.mode_list = mx23evk_video_modes;
mxsfb_pdata.mode_count = ARRAY_SIZE(mx23evk_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
MXSFB_SYNC_DOTCLK_FAILING_ACT;
}
static inline void enable_clk_enet_out(void)
{
struct clk *clk = clk_get_sys("enet_out", NULL);
if (!IS_ERR(clk))
clk_prepare_enable(clk);
}
static void __init imx28_evk_init(void)
{
enable_clk_enet_out();
update_fec_mac_prop(OUI_FSL);
mxsfb_pdata.mode_list = mx28evk_video_modes;
mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
MXSFB_SYNC_DOTCLK_FAILING_ACT;
mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
}
static void __init imx28_evk_post_init(void)
{
if (!gpio_request_one(MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT,
"flexcan-switch")) {
flexcan_pdata[0].transceiver_switch = mx28evk_flexcan0_switch;
flexcan_pdata[1].transceiver_switch = mx28evk_flexcan1_switch;
}
}
static void __init m28evk_init(void)
{
mxsfb_pdata.mode_list = m28evk_video_modes;
mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes);
mxsfb_pdata.default_bpp = 16;
mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
}
static void __init sc_sps1_init(void)
{
enable_clk_enet_out();
}
static int apx4devkit_phy_fixup(struct phy_device *phy)
{
phy->dev_flags |= MICREL_PHY_50MHZ_CLK;
return 0;
}
static void __init apx4devkit_init(void)
{
enable_clk_enet_out();
if (IS_BUILTIN(CONFIG_PHYLIB))
phy_register_fixup_for_uid(PHY_ID_KSZ8051, MICREL_PHY_ID_MASK,
apx4devkit_phy_fixup);
mxsfb_pdata.mode_list = apx4devkit_video_modes;
mxsfb_pdata.mode_count = ARRAY_SIZE(apx4devkit_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
MXSFB_SYNC_DOTCLK_FAILING_ACT;
}
#define ENET0_MDC__GPIO_4_0 MXS_GPIO_NR(4, 0)
#define ENET0_MDIO__GPIO_4_1 MXS_GPIO_NR(4, 1)
#define ENET0_RX_EN__GPIO_4_2 MXS_GPIO_NR(4, 2)
#define ENET0_RXD0__GPIO_4_3 MXS_GPIO_NR(4, 3)
#define ENET0_RXD1__GPIO_4_4 MXS_GPIO_NR(4, 4)
#define ENET0_TX_EN__GPIO_4_6 MXS_GPIO_NR(4, 6)
#define ENET0_TXD0__GPIO_4_7 MXS_GPIO_NR(4, 7)
#define ENET0_TXD1__GPIO_4_8 MXS_GPIO_NR(4, 8)
#define ENET_CLK__GPIO_4_16 MXS_GPIO_NR(4, 16)
#define TX28_FEC_PHY_POWER MXS_GPIO_NR(3, 29)
#define TX28_FEC_PHY_RESET MXS_GPIO_NR(4, 13)
#define TX28_FEC_nINT MXS_GPIO_NR(4, 5)
static const struct gpio tx28_gpios[] __initconst = {
{ ENET0_MDC__GPIO_4_0, GPIOF_OUT_INIT_LOW, "GPIO_4_0" },
{ ENET0_MDIO__GPIO_4_1, GPIOF_OUT_INIT_LOW, "GPIO_4_1" },
{ ENET0_RX_EN__GPIO_4_2, GPIOF_OUT_INIT_LOW, "GPIO_4_2" },
{ ENET0_RXD0__GPIO_4_3, GPIOF_OUT_INIT_LOW, "GPIO_4_3" },
{ ENET0_RXD1__GPIO_4_4, GPIOF_OUT_INIT_LOW, "GPIO_4_4" },
{ ENET0_TX_EN__GPIO_4_6, GPIOF_OUT_INIT_LOW, "GPIO_4_6" },
{ ENET0_TXD0__GPIO_4_7, GPIOF_OUT_INIT_LOW, "GPIO_4_7" },
{ ENET0_TXD1__GPIO_4_8, GPIOF_OUT_INIT_LOW, "GPIO_4_8" },
{ ENET_CLK__GPIO_4_16, GPIOF_OUT_INIT_LOW, "GPIO_4_16" },
{ TX28_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" },
{ TX28_FEC_PHY_RESET, GPIOF_OUT_INIT_LOW, "fec-phy-reset" },
{ TX28_FEC_nINT, GPIOF_DIR_IN, "fec-int" },
};
static void __init tx28_post_init(void)
{
struct device_node *np;
struct platform_device *pdev;
struct pinctrl *pctl;
int ret;
enable_clk_enet_out();
np = of_find_compatible_node(NULL, NULL, "fsl,imx28-fec");
pdev = of_find_device_by_node(np);
if (!pdev) {
pr_err("%s: failed to find fec device\n", __func__);
return;
}
pctl = pinctrl_get_select(&pdev->dev, "gpio_mode");
if (IS_ERR(pctl)) {
pr_err("%s: failed to get pinctrl state\n", __func__);
return;
}
ret = gpio_request_array(tx28_gpios, ARRAY_SIZE(tx28_gpios));
if (ret) {
pr_err("%s: failed to request gpios: %d\n", __func__, ret);
return;
}
/* Power up fec phy */
gpio_set_value(TX28_FEC_PHY_POWER, 1);
msleep(26); /* 25ms according to data sheet */
/* Mode strap pins */
gpio_set_value(ENET0_RX_EN__GPIO_4_2, 1);
gpio_set_value(ENET0_RXD0__GPIO_4_3, 1);
gpio_set_value(ENET0_RXD1__GPIO_4_4, 1);
udelay(100); /* minimum assertion time for nRST */
/* Deasserting FEC PHY RESET */
gpio_set_value(TX28_FEC_PHY_RESET, 1);
pinctrl_put(pctl);
}
static void __init cfa10049_init(void)
{
enable_clk_enet_out();
update_fec_mac_prop(OUI_CRYSTALFONTZ);
mxsfb_pdata.mode_list = cfa10049_video_modes;
mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
}
static void __init cfa10037_init(void)
{
enable_clk_enet_out();
update_fec_mac_prop(OUI_CRYSTALFONTZ);
}
static void __init apf28_init(void)
{
enable_clk_enet_out();
mxsfb_pdata.mode_list = apf28dev_video_modes;
mxsfb_pdata.mode_count = ARRAY_SIZE(apf28dev_video_modes);
mxsfb_pdata.default_bpp = 16;
mxsfb_pdata.ld_intf_width = STMLCDIF_16BIT;
mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
MXSFB_SYNC_DOTCLK_FAILING_ACT;
}
static void __init mxs_machine_init(void)
{
if (of_machine_is_compatible("fsl,imx28-evk"))
imx28_evk_init();
else if (of_machine_is_compatible("fsl,imx23-evk"))
imx23_evk_init();
else if (of_machine_is_compatible("denx,m28evk"))
m28evk_init();
else if (of_machine_is_compatible("bluegiga,apx4devkit"))
apx4devkit_init();
else if (of_machine_is_compatible("crystalfontz,cfa10037"))
cfa10037_init();
else if (of_machine_is_compatible("crystalfontz,cfa10049"))
cfa10049_init();
else if (of_machine_is_compatible("armadeus,imx28-apf28"))
apf28_init();
else if (of_machine_is_compatible("schulercontrol,imx28-sps1"))
sc_sps1_init();
of_platform_populate(NULL, of_default_bus_match_table,
mxs_auxdata_lookup, NULL);
if (of_machine_is_compatible("karo,tx28"))
tx28_post_init();
if (of_machine_is_compatible("fsl,imx28-evk"))
imx28_evk_post_init();
}
static const char *imx23_dt_compat[] __initdata = {
"fsl,imx23",
NULL,
};
static const char *imx28_dt_compat[] __initdata = {
"fsl,imx28",
NULL,
};
DT_MACHINE_START(IMX23, "Freescale i.MX23 (Device Tree)")
.map_io = mx23_map_io,
.init_irq = icoll_init_irq,
.handle_irq = icoll_handle_irq,
.init_time = imx23_timer_init,
.init_machine = mxs_machine_init,
.dt_compat = imx23_dt_compat,
.restart = mxs_restart,
MACHINE_END
DT_MACHINE_START(IMX28, "Freescale i.MX28 (Device Tree)")
.map_io = mx28_map_io,
.init_irq = icoll_init_irq,
.handle_irq = icoll_handle_irq,
.init_time = imx28_timer_init,
.init_machine = mxs_machine_init,
.dt_compat = imx28_dt_compat,
.restart = mxs_restart,
MACHINE_END
Reference in New Issue View Git Blame Copy Permalink