linux_dsm_epyc7002/drivers/platform/chrome/Kconfig
Rushikesh S Kadam 26a14267af platform/chrome: Add ChromeOS EC ISHTP driver
This driver implements a slim layer to enable the ChromeOS
EC kernel stack (cros_ec) to communicate with ChromeOS EC
firmware running on the Intel Integrated Sensor Hub (ISH).

The driver registers a ChromeOS EC MFD device to connect
with cros_ec kernel stack (upper layer), and it registers a
client with the ISH Transport Protocol bus (lower layer) to
talk with the ISH firwmare. See description of the ISHTP
protocol at Documentation/hid/intel-ish-hid.txt

Signed-off-by: Rushikesh S Kadam <rushikesh.s.kadam@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Tested-by: Jett Rink <jettrink@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2019-05-20 10:18:10 +02:00

195 lines
6.1 KiB
Plaintext

#
# Platform support for Chrome OS hardware (Chromebooks and Chromeboxes)
#
menuconfig CHROME_PLATFORMS
bool "Platform support for Chrome hardware"
depends on X86 || ARM || ARM64 || COMPILE_TEST
---help---
Say Y here to get to see options for platform support for
various Chromebooks and Chromeboxes. This option alone does
not add any kernel code.
If you say N, all options in this submenu will be skipped and disabled.
if CHROME_PLATFORMS
config CHROMEOS_LAPTOP
tristate "Chrome OS Laptop"
depends on I2C && DMI && X86
---help---
This driver instantiates i2c and smbus devices such as
light sensors and touchpads.
If you have a supported Chromebook, choose Y or M here.
The module will be called chromeos_laptop.
config CHROMEOS_PSTORE
tristate "Chrome OS pstore support"
depends on X86
---help---
This module instantiates the persistent storage on x86 ChromeOS
devices. It can be used to store away console logs and crash
information across reboots.
The range of memory used is 0xf00000-0x1000000, traditionally
the memory used to back VGA controller memory.
If you have a supported Chromebook, choose Y or M here.
The module will be called chromeos_pstore.
config CHROMEOS_TBMC
tristate "ChromeOS Tablet Switch Controller"
depends on ACPI
depends on INPUT
help
This option adds a driver for the tablet switch on
select Chrome OS systems.
To compile this driver as a module, choose M here: the
module will be called chromeos_tbmc.
config CROS_EC_I2C
tristate "ChromeOS Embedded Controller (I2C)"
depends on MFD_CROS_EC && I2C
help
If you say Y here, you get support for talking to the ChromeOS
EC through an I2C bus. This uses a simple byte-level protocol with
a checksum. Failing accesses will be retried three times to
improve reliability.
config CROS_EC_RPMSG
tristate "ChromeOS Embedded Controller (rpmsg)"
depends on MFD_CROS_EC && RPMSG && OF
help
If you say Y here, you get support for talking to the ChromeOS EC
through rpmsg. This uses a simple byte-level protocol with a
checksum. Also since there's no addition EC-to-host interrupt, this
use a byte in message to distinguish host event from host command.
To compile this driver as a module, choose M here: the
module will be called cros_ec_rpmsg.
config CROS_EC_ISHTP
tristate "ChromeOS Embedded Controller (ISHTP)"
depends on MFD_CROS_EC
depends on INTEL_ISH_HID
help
If you say Y here, you get support for talking to the ChromeOS EC
firmware running on Intel Integrated Sensor Hub (ISH), using the
ISH Transport protocol (ISH-TP). This uses a simple byte-level
protocol with a checksum.
To compile this driver as a module, choose M here: the
module will be called cros_ec_ishtp.
config CROS_EC_SPI
tristate "ChromeOS Embedded Controller (SPI)"
depends on MFD_CROS_EC && SPI
---help---
If you say Y here, you get support for talking to the ChromeOS EC
through a SPI bus, using a byte-level protocol. Since the EC's
response time cannot be guaranteed, we support ignoring
'pre-amble' bytes before the response actually starts.
config CROS_EC_LPC
tristate "ChromeOS Embedded Controller (LPC)"
depends on MFD_CROS_EC && ACPI && (X86 || COMPILE_TEST)
help
If you say Y here, you get support for talking to the ChromeOS EC
over an LPC bus. This uses a simple byte-level protocol with a
checksum. This is used for userspace access only. The kernel
typically has its own communication methods.
To compile this driver as a module, choose M here: the
module will be called cros_ec_lpc.
config CROS_EC_LPC_MEC
bool "ChromeOS Embedded Controller LPC Microchip EC (MEC) variant"
depends on CROS_EC_LPC
default n
help
If you say Y here, a variant LPC protocol for the Microchip EC
will be used. Note that this variant is not backward compatible
with non-Microchip ECs.
If you have a ChromeOS Embedded Controller Microchip EC variant
choose Y here.
config CROS_EC_PROTO
bool
help
ChromeOS EC communication protocol helpers.
config CROS_KBD_LED_BACKLIGHT
tristate "Backlight LED support for Chrome OS keyboards"
depends on LEDS_CLASS && ACPI
help
This option enables support for the keyboard backlight LEDs on
select Chrome OS systems.
To compile this driver as a module, choose M here: the
module will be called cros_kbd_led_backlight.
config CROS_EC_LIGHTBAR
tristate "Chromebook Pixel's lightbar support"
depends on MFD_CROS_EC_CHARDEV
default MFD_CROS_EC_CHARDEV
help
This option exposes the Chromebook Pixel's lightbar to
userspace.
To compile this driver as a module, choose M here: the
module will be called cros_ec_lightbar.
config CROS_EC_VBC
tristate "ChromeOS EC vboot context support"
depends on MFD_CROS_EC_CHARDEV && OF
default MFD_CROS_EC_CHARDEV
help
This option exposes the ChromeOS EC vboot context nvram to
userspace.
To compile this driver as a module, choose M here: the
module will be called cros_ec_vbc.
config CROS_EC_DEBUGFS
tristate "Export ChromeOS EC internals in DebugFS"
depends on MFD_CROS_EC_CHARDEV && DEBUG_FS
default MFD_CROS_EC_CHARDEV
help
This option exposes the ChromeOS EC device internals to
userspace.
To compile this driver as a module, choose M here: the
module will be called cros_ec_debugfs.
config CROS_EC_SYSFS
tristate "ChromeOS EC control and information through sysfs"
depends on MFD_CROS_EC_CHARDEV && SYSFS
default MFD_CROS_EC_CHARDEV
help
This option exposes some sysfs attributes to control and get
information from ChromeOS EC.
To compile this driver as a module, choose M here: the
module will be called cros_ec_sysfs.
config CROS_USBPD_LOGGER
tristate "Logging driver for USB PD charger"
depends on CHARGER_CROS_USBPD
default y
select RTC_LIB
help
This option enables support for logging event data for the USB PD charger
available in the Embedded Controller on ChromeOS systems.
To compile this driver as a module, choose M here: the
module will be called cros_usbpd_logger.
source "drivers/platform/chrome/wilco_ec/Kconfig"
endif # CHROMEOS_PLATFORMS