linux_dsm_epyc7002/drivers/acpi/resource.c
Mika Westerberg 204ebc0aa3 ACPI / resources: call acpi_get_override_irq() only for legacy IRQ resources
acpi_get_override_irq() was added because there was a problem with
buggy BIOSes passing wrong IRQ() resource for the RTC IRQ.  The
commit that added the workaround was 61fd47e0c8 (ACPI: fix two
IRQ8 issues in IOAPIC mode).

With ACPI 5 enumerated devices there are typically one or more
extended IRQ resources per device (and these IRQs can be shared).
However, the acpi_get_override_irq() workaround forces all IRQs in
range 0 - 15 (the legacy ISA IRQs) to be edge triggered, active high
as can be seen from the dmesg below:

	ACPI: IRQ 6 override to edge, high
	ACPI: IRQ 7 override to edge, high
	ACPI: IRQ 7 override to edge, high
	ACPI: IRQ 13 override to edge, high

Also /proc/interrupts for the I2C controllers (INT33C2 and INT33C3) shows
the same thing:

	7:          4          0          0          0   IO-APIC-edge INT33C2:00, INT33C3:00

The _CSR method for INT33C2 (and INT33C3) device returns following
resource:

	Interrupt (ResourceConsumer, Level, ActiveLow, Shared,,, )
	{
		0x00000007,
	}

which states that this is supposed to be level triggered, active low,
shared IRQ instead.

Fix this by making sure that acpi_get_override_irq() gets only called
when we are dealing with legacy IRQ() or IRQNoFlags() descriptors.

While we are there, correct pr_warning() to print the right triggering
value.

This change turns out to be necessary to make DMA work correctly on
systems based on the Intel Lynxpoint PCH (Platform Controller Hub).

[rjw: Changelog]
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: 3.9+ <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-19 23:55:59 +02:00

533 lines
15 KiB
C

/*
* drivers/acpi/resource.c - ACPI device resources interpretation.
*
* Copyright (C) 2012, Intel Corp.
* Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#include <linux/acpi.h>
#include <linux/device.h>
#include <linux/export.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#ifdef CONFIG_X86
#define valid_IRQ(i) (((i) != 0) && ((i) != 2))
#else
#define valid_IRQ(i) (true)
#endif
static unsigned long acpi_dev_memresource_flags(u64 len, u8 write_protect,
bool window)
{
unsigned long flags = IORESOURCE_MEM;
if (len == 0)
flags |= IORESOURCE_DISABLED;
if (write_protect == ACPI_READ_WRITE_MEMORY)
flags |= IORESOURCE_MEM_WRITEABLE;
if (window)
flags |= IORESOURCE_WINDOW;
return flags;
}
static void acpi_dev_get_memresource(struct resource *res, u64 start, u64 len,
u8 write_protect)
{
res->start = start;
res->end = start + len - 1;
res->flags = acpi_dev_memresource_flags(len, write_protect, false);
}
/**
* acpi_dev_resource_memory - Extract ACPI memory resource information.
* @ares: Input ACPI resource object.
* @res: Output generic resource object.
*
* Check if the given ACPI resource object represents a memory resource and
* if that's the case, use the information in it to populate the generic
* resource object pointed to by @res.
*/
bool acpi_dev_resource_memory(struct acpi_resource *ares, struct resource *res)
{
struct acpi_resource_memory24 *memory24;
struct acpi_resource_memory32 *memory32;
struct acpi_resource_fixed_memory32 *fixed_memory32;
switch (ares->type) {
case ACPI_RESOURCE_TYPE_MEMORY24:
memory24 = &ares->data.memory24;
acpi_dev_get_memresource(res, memory24->minimum,
memory24->address_length,
memory24->write_protect);
break;
case ACPI_RESOURCE_TYPE_MEMORY32:
memory32 = &ares->data.memory32;
acpi_dev_get_memresource(res, memory32->minimum,
memory32->address_length,
memory32->write_protect);
break;
case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
fixed_memory32 = &ares->data.fixed_memory32;
acpi_dev_get_memresource(res, fixed_memory32->address,
fixed_memory32->address_length,
fixed_memory32->write_protect);
break;
default:
return false;
}
return true;
}
EXPORT_SYMBOL_GPL(acpi_dev_resource_memory);
static unsigned int acpi_dev_ioresource_flags(u64 start, u64 end, u8 io_decode,
bool window)
{
int flags = IORESOURCE_IO;
if (io_decode == ACPI_DECODE_16)
flags |= IORESOURCE_IO_16BIT_ADDR;
if (start > end || end >= 0x10003)
flags |= IORESOURCE_DISABLED;
if (window)
flags |= IORESOURCE_WINDOW;
return flags;
}
static void acpi_dev_get_ioresource(struct resource *res, u64 start, u64 len,
u8 io_decode)
{
u64 end = start + len - 1;
res->start = start;
res->end = end;
res->flags = acpi_dev_ioresource_flags(start, end, io_decode, false);
}
/**
* acpi_dev_resource_io - Extract ACPI I/O resource information.
* @ares: Input ACPI resource object.
* @res: Output generic resource object.
*
* Check if the given ACPI resource object represents an I/O resource and
* if that's the case, use the information in it to populate the generic
* resource object pointed to by @res.
*/
bool acpi_dev_resource_io(struct acpi_resource *ares, struct resource *res)
{
struct acpi_resource_io *io;
struct acpi_resource_fixed_io *fixed_io;
switch (ares->type) {
case ACPI_RESOURCE_TYPE_IO:
io = &ares->data.io;
acpi_dev_get_ioresource(res, io->minimum,
io->address_length,
io->io_decode);
break;
case ACPI_RESOURCE_TYPE_FIXED_IO:
fixed_io = &ares->data.fixed_io;
acpi_dev_get_ioresource(res, fixed_io->address,
fixed_io->address_length,
ACPI_DECODE_10);
break;
default:
return false;
}
return true;
}
EXPORT_SYMBOL_GPL(acpi_dev_resource_io);
/**
* acpi_dev_resource_address_space - Extract ACPI address space information.
* @ares: Input ACPI resource object.
* @res: Output generic resource object.
*
* Check if the given ACPI resource object represents an address space resource
* and if that's the case, use the information in it to populate the generic
* resource object pointed to by @res.
*/
bool acpi_dev_resource_address_space(struct acpi_resource *ares,
struct resource *res)
{
acpi_status status;
struct acpi_resource_address64 addr;
bool window;
u64 len;
u8 io_decode;
switch (ares->type) {
case ACPI_RESOURCE_TYPE_ADDRESS16:
case ACPI_RESOURCE_TYPE_ADDRESS32:
case ACPI_RESOURCE_TYPE_ADDRESS64:
break;
default:
return false;
}
status = acpi_resource_to_address64(ares, &addr);
if (ACPI_FAILURE(status))
return true;
res->start = addr.minimum;
res->end = addr.maximum;
window = addr.producer_consumer == ACPI_PRODUCER;
switch(addr.resource_type) {
case ACPI_MEMORY_RANGE:
len = addr.maximum - addr.minimum + 1;
res->flags = acpi_dev_memresource_flags(len,
addr.info.mem.write_protect,
window);
break;
case ACPI_IO_RANGE:
io_decode = addr.granularity == 0xfff ?
ACPI_DECODE_10 : ACPI_DECODE_16;
res->flags = acpi_dev_ioresource_flags(addr.minimum,
addr.maximum,
io_decode, window);
break;
case ACPI_BUS_NUMBER_RANGE:
res->flags = IORESOURCE_BUS;
break;
default:
res->flags = 0;
}
return true;
}
EXPORT_SYMBOL_GPL(acpi_dev_resource_address_space);
/**
* acpi_dev_resource_ext_address_space - Extract ACPI address space information.
* @ares: Input ACPI resource object.
* @res: Output generic resource object.
*
* Check if the given ACPI resource object represents an extended address space
* resource and if that's the case, use the information in it to populate the
* generic resource object pointed to by @res.
*/
bool acpi_dev_resource_ext_address_space(struct acpi_resource *ares,
struct resource *res)
{
struct acpi_resource_extended_address64 *ext_addr;
bool window;
u64 len;
u8 io_decode;
if (ares->type != ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64)
return false;
ext_addr = &ares->data.ext_address64;
res->start = ext_addr->minimum;
res->end = ext_addr->maximum;
window = ext_addr->producer_consumer == ACPI_PRODUCER;
switch(ext_addr->resource_type) {
case ACPI_MEMORY_RANGE:
len = ext_addr->maximum - ext_addr->minimum + 1;
res->flags = acpi_dev_memresource_flags(len,
ext_addr->info.mem.write_protect,
window);
break;
case ACPI_IO_RANGE:
io_decode = ext_addr->granularity == 0xfff ?
ACPI_DECODE_10 : ACPI_DECODE_16;
res->flags = acpi_dev_ioresource_flags(ext_addr->minimum,
ext_addr->maximum,
io_decode, window);
break;
case ACPI_BUS_NUMBER_RANGE:
res->flags = IORESOURCE_BUS;
break;
default:
res->flags = 0;
}
return true;
}
EXPORT_SYMBOL_GPL(acpi_dev_resource_ext_address_space);
/**
* acpi_dev_irq_flags - Determine IRQ resource flags.
* @triggering: Triggering type as provided by ACPI.
* @polarity: Interrupt polarity as provided by ACPI.
* @shareable: Whether or not the interrupt is shareable.
*/
unsigned long acpi_dev_irq_flags(u8 triggering, u8 polarity, u8 shareable)
{
unsigned long flags;
if (triggering == ACPI_LEVEL_SENSITIVE)
flags = polarity == ACPI_ACTIVE_LOW ?
IORESOURCE_IRQ_LOWLEVEL : IORESOURCE_IRQ_HIGHLEVEL;
else
flags = polarity == ACPI_ACTIVE_LOW ?
IORESOURCE_IRQ_LOWEDGE : IORESOURCE_IRQ_HIGHEDGE;
if (shareable == ACPI_SHARED)
flags |= IORESOURCE_IRQ_SHAREABLE;
return flags | IORESOURCE_IRQ;
}
EXPORT_SYMBOL_GPL(acpi_dev_irq_flags);
static void acpi_dev_irqresource_disabled(struct resource *res, u32 gsi)
{
res->start = gsi;
res->end = gsi;
res->flags = IORESOURCE_IRQ | IORESOURCE_DISABLED;
}
static void acpi_dev_get_irqresource(struct resource *res, u32 gsi,
u8 triggering, u8 polarity, u8 shareable,
bool legacy)
{
int irq, p, t;
if (!valid_IRQ(gsi)) {
acpi_dev_irqresource_disabled(res, gsi);
return;
}
/*
* In IO-APIC mode, use overrided attribute. Two reasons:
* 1. BIOS bug in DSDT
* 2. BIOS uses IO-APIC mode Interrupt Source Override
*
* We do this only if we are dealing with IRQ() or IRQNoFlags()
* resource (the legacy ISA resources). With modern ACPI 5 devices
* using extended IRQ descriptors we take the IRQ configuration
* from _CRS directly.
*/
if (legacy && !acpi_get_override_irq(gsi, &t, &p)) {
u8 trig = t ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
u8 pol = p ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
if (triggering != trig || polarity != pol) {
pr_warning("ACPI: IRQ %d override to %s, %s\n", gsi,
t ? "level" : "edge", p ? "low" : "high");
triggering = trig;
polarity = pol;
}
}
res->flags = acpi_dev_irq_flags(triggering, polarity, shareable);
irq = acpi_register_gsi(NULL, gsi, triggering, polarity);
if (irq >= 0) {
res->start = irq;
res->end = irq;
} else {
acpi_dev_irqresource_disabled(res, gsi);
}
}
/**
* acpi_dev_resource_interrupt - Extract ACPI interrupt resource information.
* @ares: Input ACPI resource object.
* @index: Index into the array of GSIs represented by the resource.
* @res: Output generic resource object.
*
* Check if the given ACPI resource object represents an interrupt resource
* and @index does not exceed the resource's interrupt count (true is returned
* in that case regardless of the results of the other checks)). If that's the
* case, register the GSI corresponding to @index from the array of interrupts
* represented by the resource and populate the generic resource object pointed
* to by @res accordingly. If the registration of the GSI is not successful,
* IORESOURCE_DISABLED will be set it that object's flags.
*/
bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
struct resource *res)
{
struct acpi_resource_irq *irq;
struct acpi_resource_extended_irq *ext_irq;
switch (ares->type) {
case ACPI_RESOURCE_TYPE_IRQ:
/*
* Per spec, only one interrupt per descriptor is allowed in
* _CRS, but some firmware violates this, so parse them all.
*/
irq = &ares->data.irq;
if (index >= irq->interrupt_count) {
acpi_dev_irqresource_disabled(res, 0);
return false;
}
acpi_dev_get_irqresource(res, irq->interrupts[index],
irq->triggering, irq->polarity,
irq->sharable, true);
break;
case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
ext_irq = &ares->data.extended_irq;
if (index >= ext_irq->interrupt_count) {
acpi_dev_irqresource_disabled(res, 0);
return false;
}
acpi_dev_get_irqresource(res, ext_irq->interrupts[index],
ext_irq->triggering, ext_irq->polarity,
ext_irq->sharable, false);
break;
default:
return false;
}
return true;
}
EXPORT_SYMBOL_GPL(acpi_dev_resource_interrupt);
/**
* acpi_dev_free_resource_list - Free resource from %acpi_dev_get_resources().
* @list: The head of the resource list to free.
*/
void acpi_dev_free_resource_list(struct list_head *list)
{
struct resource_list_entry *rentry, *re;
list_for_each_entry_safe(rentry, re, list, node) {
list_del(&rentry->node);
kfree(rentry);
}
}
EXPORT_SYMBOL_GPL(acpi_dev_free_resource_list);
struct res_proc_context {
struct list_head *list;
int (*preproc)(struct acpi_resource *, void *);
void *preproc_data;
int count;
int error;
};
static acpi_status acpi_dev_new_resource_entry(struct resource *r,
struct res_proc_context *c)
{
struct resource_list_entry *rentry;
rentry = kmalloc(sizeof(*rentry), GFP_KERNEL);
if (!rentry) {
c->error = -ENOMEM;
return AE_NO_MEMORY;
}
rentry->res = *r;
list_add_tail(&rentry->node, c->list);
c->count++;
return AE_OK;
}
static acpi_status acpi_dev_process_resource(struct acpi_resource *ares,
void *context)
{
struct res_proc_context *c = context;
struct resource r;
int i;
if (c->preproc) {
int ret;
ret = c->preproc(ares, c->preproc_data);
if (ret < 0) {
c->error = ret;
return AE_CTRL_TERMINATE;
} else if (ret > 0) {
return AE_OK;
}
}
memset(&r, 0, sizeof(r));
if (acpi_dev_resource_memory(ares, &r)
|| acpi_dev_resource_io(ares, &r)
|| acpi_dev_resource_address_space(ares, &r)
|| acpi_dev_resource_ext_address_space(ares, &r))
return acpi_dev_new_resource_entry(&r, c);
for (i = 0; acpi_dev_resource_interrupt(ares, i, &r); i++) {
acpi_status status;
status = acpi_dev_new_resource_entry(&r, c);
if (ACPI_FAILURE(status))
return status;
}
return AE_OK;
}
/**
* acpi_dev_get_resources - Get current resources of a device.
* @adev: ACPI device node to get the resources for.
* @list: Head of the resultant list of resources (must be empty).
* @preproc: The caller's preprocessing routine.
* @preproc_data: Pointer passed to the caller's preprocessing routine.
*
* Evaluate the _CRS method for the given device node and process its output by
* (1) executing the @preproc() rountine provided by the caller, passing the
* resource pointer and @preproc_data to it as arguments, for each ACPI resource
* returned and (2) converting all of the returned ACPI resources into struct
* resource objects if possible. If the return value of @preproc() in step (1)
* is different from 0, step (2) is not applied to the given ACPI resource and
* if that value is negative, the whole processing is aborted and that value is
* returned as the final error code.
*
* The resultant struct resource objects are put on the list pointed to by
* @list, that must be empty initially, as members of struct resource_list_entry
* objects. Callers of this routine should use %acpi_dev_free_resource_list() to
* free that list.
*
* The number of resources in the output list is returned on success, an error
* code reflecting the error condition is returned otherwise.
*/
int acpi_dev_get_resources(struct acpi_device *adev, struct list_head *list,
int (*preproc)(struct acpi_resource *, void *),
void *preproc_data)
{
struct res_proc_context c;
acpi_handle not_used;
acpi_status status;
if (!adev || !adev->handle || !list_empty(list))
return -EINVAL;
status = acpi_get_handle(adev->handle, METHOD_NAME__CRS, &not_used);
if (ACPI_FAILURE(status))
return 0;
c.list = list;
c.preproc = preproc;
c.preproc_data = preproc_data;
c.count = 0;
c.error = 0;
status = acpi_walk_resources(adev->handle, METHOD_NAME__CRS,
acpi_dev_process_resource, &c);
if (ACPI_FAILURE(status)) {
acpi_dev_free_resource_list(list);
return c.error ? c.error : -EIO;
}
return c.count;
}
EXPORT_SYMBOL_GPL(acpi_dev_get_resources);