mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-24 01:04:07 +07:00
e42688ed5c
it will print an error message by itself when platform_get_irq() goes wrong. so don't need dev_err() in here again. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by: Markus Elfring <Markus.Elfring@web.de> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
440 lines
11 KiB
C
440 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#define UNIPHIER_I2C_DTRM 0x00 /* TX register */
|
|
#define UNIPHIER_I2C_DTRM_IRQEN BIT(11) /* enable interrupt */
|
|
#define UNIPHIER_I2C_DTRM_STA BIT(10) /* start condition */
|
|
#define UNIPHIER_I2C_DTRM_STO BIT(9) /* stop condition */
|
|
#define UNIPHIER_I2C_DTRM_NACK BIT(8) /* do not return ACK */
|
|
#define UNIPHIER_I2C_DTRM_RD BIT(0) /* read transaction */
|
|
#define UNIPHIER_I2C_DREC 0x04 /* RX register */
|
|
#define UNIPHIER_I2C_DREC_MST BIT(14) /* 1 = master, 0 = slave */
|
|
#define UNIPHIER_I2C_DREC_TX BIT(13) /* 1 = transmit, 0 = receive */
|
|
#define UNIPHIER_I2C_DREC_STS BIT(12) /* stop condition detected */
|
|
#define UNIPHIER_I2C_DREC_LRB BIT(11) /* no ACK */
|
|
#define UNIPHIER_I2C_DREC_LAB BIT(9) /* arbitration lost */
|
|
#define UNIPHIER_I2C_DREC_BBN BIT(8) /* bus not busy */
|
|
#define UNIPHIER_I2C_MYAD 0x08 /* slave address */
|
|
#define UNIPHIER_I2C_CLK 0x0c /* clock frequency control */
|
|
#define UNIPHIER_I2C_BRST 0x10 /* bus reset */
|
|
#define UNIPHIER_I2C_BRST_FOEN BIT(1) /* normal operation */
|
|
#define UNIPHIER_I2C_BRST_RSCL BIT(0) /* release SCL */
|
|
#define UNIPHIER_I2C_HOLD 0x14 /* hold time control */
|
|
#define UNIPHIER_I2C_BSTS 0x18 /* bus status monitor */
|
|
#define UNIPHIER_I2C_BSTS_SDA BIT(1) /* readback of SDA line */
|
|
#define UNIPHIER_I2C_BSTS_SCL BIT(0) /* readback of SCL line */
|
|
#define UNIPHIER_I2C_NOISE 0x1c /* noise filter control */
|
|
#define UNIPHIER_I2C_SETUP 0x20 /* setup time control */
|
|
|
|
struct uniphier_i2c_priv {
|
|
struct completion comp;
|
|
struct i2c_adapter adap;
|
|
void __iomem *membase;
|
|
struct clk *clk;
|
|
unsigned int busy_cnt;
|
|
unsigned int clk_cycle;
|
|
};
|
|
|
|
static irqreturn_t uniphier_i2c_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct uniphier_i2c_priv *priv = dev_id;
|
|
|
|
/*
|
|
* This hardware uses edge triggered interrupt. Do not touch the
|
|
* hardware registers in this handler to make sure to catch the next
|
|
* interrupt edge. Just send a complete signal and return.
|
|
*/
|
|
complete(&priv->comp);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int uniphier_i2c_xfer_byte(struct i2c_adapter *adap, u32 txdata,
|
|
u32 *rxdatap)
|
|
{
|
|
struct uniphier_i2c_priv *priv = i2c_get_adapdata(adap);
|
|
unsigned long time_left;
|
|
u32 rxdata;
|
|
|
|
reinit_completion(&priv->comp);
|
|
|
|
txdata |= UNIPHIER_I2C_DTRM_IRQEN;
|
|
writel(txdata, priv->membase + UNIPHIER_I2C_DTRM);
|
|
|
|
time_left = wait_for_completion_timeout(&priv->comp, adap->timeout);
|
|
if (unlikely(!time_left)) {
|
|
dev_err(&adap->dev, "transaction timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
rxdata = readl(priv->membase + UNIPHIER_I2C_DREC);
|
|
if (rxdatap)
|
|
*rxdatap = rxdata;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uniphier_i2c_send_byte(struct i2c_adapter *adap, u32 txdata)
|
|
{
|
|
u32 rxdata;
|
|
int ret;
|
|
|
|
ret = uniphier_i2c_xfer_byte(adap, txdata, &rxdata);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (unlikely(rxdata & UNIPHIER_I2C_DREC_LAB))
|
|
return -EAGAIN;
|
|
|
|
if (unlikely(rxdata & UNIPHIER_I2C_DREC_LRB))
|
|
return -ENXIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uniphier_i2c_tx(struct i2c_adapter *adap, u16 addr, u16 len,
|
|
const u8 *buf)
|
|
{
|
|
int ret;
|
|
|
|
ret = uniphier_i2c_send_byte(adap, addr << 1 |
|
|
UNIPHIER_I2C_DTRM_STA |
|
|
UNIPHIER_I2C_DTRM_NACK);
|
|
if (ret)
|
|
return ret;
|
|
|
|
while (len--) {
|
|
ret = uniphier_i2c_send_byte(adap,
|
|
UNIPHIER_I2C_DTRM_NACK | *buf++);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uniphier_i2c_rx(struct i2c_adapter *adap, u16 addr, u16 len,
|
|
u8 *buf)
|
|
{
|
|
int ret;
|
|
|
|
ret = uniphier_i2c_send_byte(adap, addr << 1 |
|
|
UNIPHIER_I2C_DTRM_STA |
|
|
UNIPHIER_I2C_DTRM_NACK |
|
|
UNIPHIER_I2C_DTRM_RD);
|
|
if (ret)
|
|
return ret;
|
|
|
|
while (len--) {
|
|
u32 rxdata;
|
|
|
|
ret = uniphier_i2c_xfer_byte(adap,
|
|
len ? 0 : UNIPHIER_I2C_DTRM_NACK,
|
|
&rxdata);
|
|
if (ret)
|
|
return ret;
|
|
*buf++ = rxdata;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uniphier_i2c_stop(struct i2c_adapter *adap)
|
|
{
|
|
return uniphier_i2c_send_byte(adap, UNIPHIER_I2C_DTRM_STO |
|
|
UNIPHIER_I2C_DTRM_NACK);
|
|
}
|
|
|
|
static int uniphier_i2c_master_xfer_one(struct i2c_adapter *adap,
|
|
struct i2c_msg *msg, bool stop)
|
|
{
|
|
bool is_read = msg->flags & I2C_M_RD;
|
|
bool recovery = false;
|
|
int ret;
|
|
|
|
if (is_read)
|
|
ret = uniphier_i2c_rx(adap, msg->addr, msg->len, msg->buf);
|
|
else
|
|
ret = uniphier_i2c_tx(adap, msg->addr, msg->len, msg->buf);
|
|
|
|
if (ret == -EAGAIN) /* could not acquire bus. bail out without STOP */
|
|
return ret;
|
|
|
|
if (ret == -ETIMEDOUT) {
|
|
/* This error is fatal. Needs recovery. */
|
|
stop = false;
|
|
recovery = true;
|
|
}
|
|
|
|
if (stop) {
|
|
int ret2 = uniphier_i2c_stop(adap);
|
|
|
|
if (ret2) {
|
|
/* Failed to issue STOP. The bus needs recovery. */
|
|
recovery = true;
|
|
ret = ret ?: ret2;
|
|
}
|
|
}
|
|
|
|
if (recovery)
|
|
i2c_recover_bus(adap);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int uniphier_i2c_check_bus_busy(struct i2c_adapter *adap)
|
|
{
|
|
struct uniphier_i2c_priv *priv = i2c_get_adapdata(adap);
|
|
|
|
if (!(readl(priv->membase + UNIPHIER_I2C_DREC) &
|
|
UNIPHIER_I2C_DREC_BBN)) {
|
|
if (priv->busy_cnt++ > 3) {
|
|
/*
|
|
* If bus busy continues too long, it is probably
|
|
* in a wrong state. Try bus recovery.
|
|
*/
|
|
i2c_recover_bus(adap);
|
|
priv->busy_cnt = 0;
|
|
}
|
|
|
|
return -EAGAIN;
|
|
}
|
|
|
|
priv->busy_cnt = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int uniphier_i2c_master_xfer(struct i2c_adapter *adap,
|
|
struct i2c_msg *msgs, int num)
|
|
{
|
|
struct i2c_msg *msg, *emsg = msgs + num;
|
|
int ret;
|
|
|
|
ret = uniphier_i2c_check_bus_busy(adap);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (msg = msgs; msg < emsg; msg++) {
|
|
/* Emit STOP if it is the last message or I2C_M_STOP is set. */
|
|
bool stop = (msg + 1 == emsg) || (msg->flags & I2C_M_STOP);
|
|
|
|
ret = uniphier_i2c_master_xfer_one(adap, msg, stop);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return num;
|
|
}
|
|
|
|
static u32 uniphier_i2c_functionality(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
|
}
|
|
|
|
static const struct i2c_algorithm uniphier_i2c_algo = {
|
|
.master_xfer = uniphier_i2c_master_xfer,
|
|
.functionality = uniphier_i2c_functionality,
|
|
};
|
|
|
|
static void uniphier_i2c_reset(struct uniphier_i2c_priv *priv, bool reset_on)
|
|
{
|
|
u32 val = UNIPHIER_I2C_BRST_RSCL;
|
|
|
|
val |= reset_on ? 0 : UNIPHIER_I2C_BRST_FOEN;
|
|
writel(val, priv->membase + UNIPHIER_I2C_BRST);
|
|
}
|
|
|
|
static int uniphier_i2c_get_scl(struct i2c_adapter *adap)
|
|
{
|
|
struct uniphier_i2c_priv *priv = i2c_get_adapdata(adap);
|
|
|
|
return !!(readl(priv->membase + UNIPHIER_I2C_BSTS) &
|
|
UNIPHIER_I2C_BSTS_SCL);
|
|
}
|
|
|
|
static void uniphier_i2c_set_scl(struct i2c_adapter *adap, int val)
|
|
{
|
|
struct uniphier_i2c_priv *priv = i2c_get_adapdata(adap);
|
|
|
|
writel(val ? UNIPHIER_I2C_BRST_RSCL : 0,
|
|
priv->membase + UNIPHIER_I2C_BRST);
|
|
}
|
|
|
|
static int uniphier_i2c_get_sda(struct i2c_adapter *adap)
|
|
{
|
|
struct uniphier_i2c_priv *priv = i2c_get_adapdata(adap);
|
|
|
|
return !!(readl(priv->membase + UNIPHIER_I2C_BSTS) &
|
|
UNIPHIER_I2C_BSTS_SDA);
|
|
}
|
|
|
|
static void uniphier_i2c_unprepare_recovery(struct i2c_adapter *adap)
|
|
{
|
|
uniphier_i2c_reset(i2c_get_adapdata(adap), false);
|
|
}
|
|
|
|
static struct i2c_bus_recovery_info uniphier_i2c_bus_recovery_info = {
|
|
.recover_bus = i2c_generic_scl_recovery,
|
|
.get_scl = uniphier_i2c_get_scl,
|
|
.set_scl = uniphier_i2c_set_scl,
|
|
.get_sda = uniphier_i2c_get_sda,
|
|
.unprepare_recovery = uniphier_i2c_unprepare_recovery,
|
|
};
|
|
|
|
static void uniphier_i2c_hw_init(struct uniphier_i2c_priv *priv)
|
|
{
|
|
unsigned int cyc = priv->clk_cycle;
|
|
|
|
uniphier_i2c_reset(priv, true);
|
|
|
|
/*
|
|
* Bit30-16: clock cycles of tLOW.
|
|
* Standard-mode: tLOW = 4.7 us, tHIGH = 4.0 us
|
|
* Fast-mode: tLOW = 1.3 us, tHIGH = 0.6 us
|
|
* "tLow/tHIGH = 5/4" meets both.
|
|
*/
|
|
writel((cyc * 5 / 9 << 16) | cyc, priv->membase + UNIPHIER_I2C_CLK);
|
|
|
|
uniphier_i2c_reset(priv, false);
|
|
}
|
|
|
|
static int uniphier_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct uniphier_i2c_priv *priv;
|
|
u32 bus_speed;
|
|
unsigned long clk_rate;
|
|
int irq, ret;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->membase = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(priv->membase))
|
|
return PTR_ERR(priv->membase);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
if (of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed))
|
|
bus_speed = I2C_MAX_STANDARD_MODE_FREQ;
|
|
|
|
if (!bus_speed || bus_speed > I2C_MAX_FAST_MODE_FREQ) {
|
|
dev_err(dev, "invalid clock-frequency %d\n", bus_speed);
|
|
return -EINVAL;
|
|
}
|
|
|
|
priv->clk = devm_clk_get(dev, NULL);
|
|
if (IS_ERR(priv->clk)) {
|
|
dev_err(dev, "failed to get clock\n");
|
|
return PTR_ERR(priv->clk);
|
|
}
|
|
|
|
ret = clk_prepare_enable(priv->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
clk_rate = clk_get_rate(priv->clk);
|
|
if (!clk_rate) {
|
|
dev_err(dev, "input clock rate should not be zero\n");
|
|
ret = -EINVAL;
|
|
goto disable_clk;
|
|
}
|
|
|
|
priv->clk_cycle = clk_rate / bus_speed;
|
|
init_completion(&priv->comp);
|
|
priv->adap.owner = THIS_MODULE;
|
|
priv->adap.algo = &uniphier_i2c_algo;
|
|
priv->adap.dev.parent = dev;
|
|
priv->adap.dev.of_node = dev->of_node;
|
|
strlcpy(priv->adap.name, "UniPhier I2C", sizeof(priv->adap.name));
|
|
priv->adap.bus_recovery_info = &uniphier_i2c_bus_recovery_info;
|
|
i2c_set_adapdata(&priv->adap, priv);
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
uniphier_i2c_hw_init(priv);
|
|
|
|
ret = devm_request_irq(dev, irq, uniphier_i2c_interrupt, 0, pdev->name,
|
|
priv);
|
|
if (ret) {
|
|
dev_err(dev, "failed to request irq %d\n", irq);
|
|
goto disable_clk;
|
|
}
|
|
|
|
ret = i2c_add_adapter(&priv->adap);
|
|
disable_clk:
|
|
if (ret)
|
|
clk_disable_unprepare(priv->clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int uniphier_i2c_remove(struct platform_device *pdev)
|
|
{
|
|
struct uniphier_i2c_priv *priv = platform_get_drvdata(pdev);
|
|
|
|
i2c_del_adapter(&priv->adap);
|
|
clk_disable_unprepare(priv->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused uniphier_i2c_suspend(struct device *dev)
|
|
{
|
|
struct uniphier_i2c_priv *priv = dev_get_drvdata(dev);
|
|
|
|
clk_disable_unprepare(priv->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused uniphier_i2c_resume(struct device *dev)
|
|
{
|
|
struct uniphier_i2c_priv *priv = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(priv->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
uniphier_i2c_hw_init(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops uniphier_i2c_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(uniphier_i2c_suspend, uniphier_i2c_resume)
|
|
};
|
|
|
|
static const struct of_device_id uniphier_i2c_match[] = {
|
|
{ .compatible = "socionext,uniphier-i2c" },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, uniphier_i2c_match);
|
|
|
|
static struct platform_driver uniphier_i2c_drv = {
|
|
.probe = uniphier_i2c_probe,
|
|
.remove = uniphier_i2c_remove,
|
|
.driver = {
|
|
.name = "uniphier-i2c",
|
|
.of_match_table = uniphier_i2c_match,
|
|
.pm = &uniphier_i2c_pm_ops,
|
|
},
|
|
};
|
|
module_platform_driver(uniphier_i2c_drv);
|
|
|
|
MODULE_AUTHOR("Masahiro Yamada <yamada.masahiro@socionext.com>");
|
|
MODULE_DESCRIPTION("UniPhier I2C bus driver");
|
|
MODULE_LICENSE("GPL");
|