mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-16 04:17:27 +07:00
c0f486fde3
- Fix a regression in leds-gpio introduced by a recent commit that inadvertently changed the name of one of the properties used by the driver (Fabio Estevam). - Fix a regression in the ACPI backlight driver introduced by a recent fix that missed one special case that had to be taken into account (Aaron Lu). - Drop the level of some new kernel messages from the ACPI core introduced by a recent commit to KERN_DEBUG which they should have used from the start and drop some other unuseful KERN_ERR messages printed by ACPI (Rafael J Wysocki). - Revert an incorrect commit modifying the cpupower tool (Prarit Bhargava). - Fix two regressions introduced by recent commits in the OPP library and clean up some existing minor issues in that code (Viresh Kumar). - Continue to replace CONFIG_PM_RUNTIME with CONFIG_PM throughout the tree (or drop it where that can be done) in order to make it possible to eliminate CONFIG_PM_RUNTIME (Rafael J Wysocki, Ulf Hansson, Ludovic Desroches). There will be one more "CONFIG_PM_RUNTIME removal" batch after this one, because some new uses of it have been introduced during the current merge window, but that should be sufficient to finally get rid of it. - Make the ACPI EC driver more robust against race conditions related to GPE handler installation failures (Lv Zheng). - Prevent the ACPI device PM core code from attempting to disable GPEs that it has not enabled which confuses ACPICA and makes it report errors unnecessarily (Rafael J Wysocki). - Add a "force" command line switch to the intel_pstate driver to make it possible to override the blacklisting of some systems in that driver if needed (Ethan Zhao). - Improve intel_pstate code documentation and add a MAINTAINERS entry for it (Kristen Carlson Accardi). - Make the ACPI fan driver create cooling device interfaces witn names that reflect the IDs of the ACPI device objects they are associated with, except for "generic" ACPI fans (PNP ID "PNP0C0B"). That's necessary for user space thermal management tools to be able to connect the fans with the parts of the system they are supposed to be cooling properly. From Srinivas Pandruvada. / -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABCAAGBQJUk0IDAAoJEILEb/54YlRx7fgP/3+yF/0TnEW93j2ALDAQFiLF tSv2A2vQC8vtMJjjWx0z/HqPh86gfaReEFZmUJD/Q/e2LXEnxNZJ+QMjcekPVkDM mTvcIMc2MR8vOA/oMkgxeaKregrrx7RkCfojd+NWZhVukkjl+mvBHgAnYjXRL+NZ unDWGlbHG97vq/3kGjPYhDS00nxHblw8NHFBu5HL5RxwABdWoeZJITwqxXWyuPLw nlqNWlOxmwvtSbw2VMKz0uof1nFHyQLykYsMG0ZsyayCRdWUZYkEqmE7GGpCLkLu D6yfmlpen6ccIOsEAae0eXBt50IFY9Tihk5lovx1mZmci2SNRg29BqMI105wIn0u 8b8Ej7MNHp7yMxRpB5WfU90p/y7ioJns9guFZxY0CKaRnrI2+BLt3RscMi3MPI06 Cu2/WkSSa09fhDPA+pk+VDYsmWgyVawigesNmMP5/cvYO/yYywVRjOuO1k77qQGp 4dSpFYEHfpxinejZnVZOk2V9MkvSLoSMux6wPV0xM0IE1iD0ulVpHjTJrwp80ph4 +bfUFVr/vrD1y7EKbf1PD363ZKvJhWhvQWDgETsM1vgLf21PfWO7C2kflIAsWsdQ 1ukD5nCBRlP4K73hG7bdM6kRztXhUdR0SHg85/t0KB/ExiVqtcXIzB60D0G1lENd QlKbq3O4lim1WGuhazQY =5fo2 -----END PGP SIGNATURE----- Merge tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI and power management updates from Rafael Wysocki: "These are regression fixes (leds-gpio, ACPI backlight driver, operating performance points library, ACPI device enumeration messages, cpupower tool), other bug fixes (ACPI EC driver, ACPI device PM), some cleanups in the operating performance points (OPP) framework, continuation of CONFIG_PM_RUNTIME elimination, a couple of minor intel_pstate driver changes, a new MAINTAINERS entry for it and an ACPI fan driver change needed for better support of thermal management in user space. Specifics: - Fix a regression in leds-gpio introduced by a recent commit that inadvertently changed the name of one of the properties used by the driver (Fabio Estevam). - Fix a regression in the ACPI backlight driver introduced by a recent fix that missed one special case that had to be taken into account (Aaron Lu). - Drop the level of some new kernel messages from the ACPI core introduced by a recent commit to KERN_DEBUG which they should have used from the start and drop some other unuseful KERN_ERR messages printed by ACPI (Rafael J Wysocki). - Revert an incorrect commit modifying the cpupower tool (Prarit Bhargava). - Fix two regressions introduced by recent commits in the OPP library and clean up some existing minor issues in that code (Viresh Kumar). - Continue to replace CONFIG_PM_RUNTIME with CONFIG_PM throughout the tree (or drop it where that can be done) in order to make it possible to eliminate CONFIG_PM_RUNTIME (Rafael J Wysocki, Ulf Hansson, Ludovic Desroches). There will be one more "CONFIG_PM_RUNTIME removal" batch after this one, because some new uses of it have been introduced during the current merge window, but that should be sufficient to finally get rid of it. - Make the ACPI EC driver more robust against race conditions related to GPE handler installation failures (Lv Zheng). - Prevent the ACPI device PM core code from attempting to disable GPEs that it has not enabled which confuses ACPICA and makes it report errors unnecessarily (Rafael J Wysocki). - Add a "force" command line switch to the intel_pstate driver to make it possible to override the blacklisting of some systems in that driver if needed (Ethan Zhao). - Improve intel_pstate code documentation and add a MAINTAINERS entry for it (Kristen Carlson Accardi). - Make the ACPI fan driver create cooling device interfaces witn names that reflect the IDs of the ACPI device objects they are associated with, except for "generic" ACPI fans (PNP ID "PNP0C0B"). That's necessary for user space thermal management tools to be able to connect the fans with the parts of the system they are supposed to be cooling properly. From Srinivas Pandruvada" * tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) MAINTAINERS: add entry for intel_pstate ACPI / video: update the skip case for acpi_video_device_in_dod() power / PM: Eliminate CONFIG_PM_RUNTIME NFC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM ACPI / EC: Fix unexpected ec_remove_handlers() invocations Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()" tracing / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM x86 / PM: Replace CONFIG_PM_RUNTIME in io_apic.c PM: Remove the SET_PM_RUNTIME_PM_OPS() macro mmc: atmel-mci: use SET_RUNTIME_PM_OPS() macro PM / Kconfig: Replace PM_RUNTIME with PM in dependencies ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM sound / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM phy / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tty / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM ACPI / PM: Do not disable wakeup GPEs that have not been enabled ACPI / utils: Drop error messages from acpi_evaluate_reference() ...
573 lines
14 KiB
C
573 lines
14 KiB
C
/*
|
|
* tas2552.c - ALSA SoC Texas Instruments TAS2552 Mono Audio Amplifier
|
|
*
|
|
* Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
|
|
*
|
|
* Author: Dan Murphy <dmurphy@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/device.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/soc-dapm.h>
|
|
#include <sound/tlv.h>
|
|
#include <sound/tas2552-plat.h>
|
|
|
|
#include "tas2552.h"
|
|
|
|
static struct reg_default tas2552_reg_defs[] = {
|
|
{TAS2552_CFG_1, 0x22},
|
|
{TAS2552_CFG_3, 0x80},
|
|
{TAS2552_DOUT, 0x00},
|
|
{TAS2552_OUTPUT_DATA, 0xc0},
|
|
{TAS2552_PDM_CFG, 0x01},
|
|
{TAS2552_PGA_GAIN, 0x00},
|
|
{TAS2552_BOOST_PT_CTRL, 0x0f},
|
|
{TAS2552_RESERVED_0D, 0x00},
|
|
{TAS2552_LIMIT_RATE_HYS, 0x08},
|
|
{TAS2552_CFG_2, 0xef},
|
|
{TAS2552_SER_CTRL_1, 0x00},
|
|
{TAS2552_SER_CTRL_2, 0x00},
|
|
{TAS2552_PLL_CTRL_1, 0x10},
|
|
{TAS2552_PLL_CTRL_2, 0x00},
|
|
{TAS2552_PLL_CTRL_3, 0x00},
|
|
{TAS2552_BTIP, 0x8f},
|
|
{TAS2552_BTS_CTRL, 0x80},
|
|
{TAS2552_LIMIT_RELEASE, 0x04},
|
|
{TAS2552_LIMIT_INT_COUNT, 0x00},
|
|
{TAS2552_EDGE_RATE_CTRL, 0x40},
|
|
{TAS2552_VBAT_DATA, 0x00},
|
|
};
|
|
|
|
#define TAS2552_NUM_SUPPLIES 3
|
|
static const char *tas2552_supply_names[TAS2552_NUM_SUPPLIES] = {
|
|
"vbat", /* vbat voltage */
|
|
"iovdd", /* I/O Voltage */
|
|
"avdd", /* Analog DAC Voltage */
|
|
};
|
|
|
|
struct tas2552_data {
|
|
struct snd_soc_codec *codec;
|
|
struct regmap *regmap;
|
|
struct i2c_client *tas2552_client;
|
|
struct regulator_bulk_data supplies[TAS2552_NUM_SUPPLIES];
|
|
struct gpio_desc *enable_gpio;
|
|
unsigned char regs[TAS2552_VBAT_DATA];
|
|
unsigned int mclk;
|
|
};
|
|
|
|
/* Input mux controls */
|
|
static const char *tas2552_input_texts[] = {
|
|
"Digital", "Analog"
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(tas2552_input_mux_enum, TAS2552_CFG_3, 7,
|
|
tas2552_input_texts);
|
|
|
|
static const struct snd_kcontrol_new tas2552_input_mux_control[] = {
|
|
SOC_DAPM_ENUM("Input selection", tas2552_input_mux_enum)
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget tas2552_dapm_widgets[] =
|
|
{
|
|
SND_SOC_DAPM_INPUT("IN"),
|
|
|
|
/* MUX Controls */
|
|
SND_SOC_DAPM_MUX("Input selection", SND_SOC_NOPM, 0, 0,
|
|
tas2552_input_mux_control),
|
|
|
|
SND_SOC_DAPM_AIF_IN("DAC IN", "DAC Playback", 0, SND_SOC_NOPM, 0, 0),
|
|
SND_SOC_DAPM_DAC("DAC", NULL, SND_SOC_NOPM, 0, 0),
|
|
SND_SOC_DAPM_OUT_DRV("ClassD", TAS2552_CFG_2, 7, 0, NULL, 0),
|
|
SND_SOC_DAPM_SUPPLY("PLL", TAS2552_CFG_2, 3, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_OUTPUT("OUT")
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route tas2552_audio_map[] = {
|
|
{"DAC", NULL, "DAC IN"},
|
|
{"Input selection", "Digital", "DAC"},
|
|
{"Input selection", "Analog", "IN"},
|
|
{"ClassD", NULL, "Input selection"},
|
|
{"OUT", NULL, "ClassD"},
|
|
{"ClassD", NULL, "PLL"},
|
|
};
|
|
|
|
#ifdef CONFIG_PM
|
|
static void tas2552_sw_shutdown(struct tas2552_data *tas_data, int sw_shutdown)
|
|
{
|
|
u8 cfg1_reg;
|
|
|
|
if (sw_shutdown)
|
|
cfg1_reg = 0;
|
|
else
|
|
cfg1_reg = TAS2552_SWS_MASK;
|
|
|
|
snd_soc_update_bits(tas_data->codec, TAS2552_CFG_1,
|
|
TAS2552_SWS_MASK, cfg1_reg);
|
|
}
|
|
#endif
|
|
|
|
static int tas2552_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
struct tas2552_data *tas2552 = dev_get_drvdata(codec->dev);
|
|
int sample_rate, pll_clk;
|
|
int d;
|
|
u8 p, j;
|
|
|
|
if (!tas2552->mclk)
|
|
return -EINVAL;
|
|
|
|
snd_soc_update_bits(codec, TAS2552_CFG_2, TAS2552_PLL_ENABLE, 0);
|
|
|
|
if (tas2552->mclk == TAS2552_245MHZ_CLK ||
|
|
tas2552->mclk == TAS2552_225MHZ_CLK) {
|
|
/* By pass the PLL configuration */
|
|
snd_soc_update_bits(codec, TAS2552_PLL_CTRL_2,
|
|
TAS2552_PLL_BYPASS_MASK,
|
|
TAS2552_PLL_BYPASS);
|
|
} else {
|
|
/* Fill in the PLL control registers for J & D
|
|
* PLL_CLK = (.5 * freq * J.D) / 2^p
|
|
* Need to fill in J and D here based on incoming freq
|
|
*/
|
|
p = snd_soc_read(codec, TAS2552_PLL_CTRL_1);
|
|
p = (p >> 7);
|
|
sample_rate = params_rate(params);
|
|
|
|
if (sample_rate == 48000)
|
|
pll_clk = TAS2552_245MHZ_CLK;
|
|
else if (sample_rate == 44100)
|
|
pll_clk = TAS2552_225MHZ_CLK;
|
|
else {
|
|
dev_vdbg(codec->dev, "Substream sample rate is not found %i\n",
|
|
params_rate(params));
|
|
return -EINVAL;
|
|
}
|
|
|
|
j = (pll_clk * 2 * (1 << p)) / tas2552->mclk;
|
|
d = (pll_clk * 2 * (1 << p)) % tas2552->mclk;
|
|
|
|
snd_soc_update_bits(codec, TAS2552_PLL_CTRL_1,
|
|
TAS2552_PLL_J_MASK, j);
|
|
snd_soc_write(codec, TAS2552_PLL_CTRL_2,
|
|
(d >> 7) & TAS2552_PLL_D_UPPER_MASK);
|
|
snd_soc_write(codec, TAS2552_PLL_CTRL_3,
|
|
d & TAS2552_PLL_D_LOWER_MASK);
|
|
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tas2552_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
u8 serial_format;
|
|
u8 serial_control_mask;
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
serial_format = 0x00;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFM:
|
|
serial_format = TAS2552_WORD_CLK_MASK;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFS:
|
|
serial_format = TAS2552_BIT_CLK_MASK;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
serial_format = (TAS2552_BIT_CLK_MASK | TAS2552_WORD_CLK_MASK);
|
|
break;
|
|
default:
|
|
dev_vdbg(codec->dev, "DAI Format master is not found\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
serial_control_mask = TAS2552_BIT_CLK_MASK | TAS2552_WORD_CLK_MASK;
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
serial_format &= TAS2552_DAIFMT_I2S_MASK;
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
serial_format |= TAS2552_DAIFMT_DSP;
|
|
break;
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
serial_format |= TAS2552_DAIFMT_RIGHT_J;
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
serial_format |= TAS2552_DAIFMT_LEFT_J;
|
|
break;
|
|
default:
|
|
dev_vdbg(codec->dev, "DAI Format is not found\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (fmt & SND_SOC_DAIFMT_FORMAT_MASK)
|
|
serial_control_mask |= TAS2552_DATA_FORMAT_MASK;
|
|
|
|
snd_soc_update_bits(codec, TAS2552_SER_CTRL_1, serial_control_mask,
|
|
serial_format);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tas2552_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id,
|
|
unsigned int freq, int dir)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
struct tas2552_data *tas2552 = dev_get_drvdata(codec->dev);
|
|
|
|
tas2552->mclk = freq;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tas2552_mute(struct snd_soc_dai *dai, int mute)
|
|
{
|
|
u8 cfg1_reg;
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
|
|
if (mute)
|
|
cfg1_reg = TAS2552_MUTE_MASK;
|
|
else
|
|
cfg1_reg = ~TAS2552_MUTE_MASK;
|
|
|
|
snd_soc_update_bits(codec, TAS2552_CFG_1, TAS2552_MUTE_MASK, cfg1_reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int tas2552_runtime_suspend(struct device *dev)
|
|
{
|
|
struct tas2552_data *tas2552 = dev_get_drvdata(dev);
|
|
|
|
tas2552_sw_shutdown(tas2552, 0);
|
|
|
|
regcache_cache_only(tas2552->regmap, true);
|
|
regcache_mark_dirty(tas2552->regmap);
|
|
|
|
if (tas2552->enable_gpio)
|
|
gpiod_set_value(tas2552->enable_gpio, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tas2552_runtime_resume(struct device *dev)
|
|
{
|
|
struct tas2552_data *tas2552 = dev_get_drvdata(dev);
|
|
|
|
if (tas2552->enable_gpio)
|
|
gpiod_set_value(tas2552->enable_gpio, 1);
|
|
|
|
tas2552_sw_shutdown(tas2552, 1);
|
|
|
|
regcache_cache_only(tas2552->regmap, false);
|
|
regcache_sync(tas2552->regmap);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct dev_pm_ops tas2552_pm = {
|
|
SET_RUNTIME_PM_OPS(tas2552_runtime_suspend, tas2552_runtime_resume,
|
|
NULL)
|
|
};
|
|
|
|
static struct snd_soc_dai_ops tas2552_speaker_dai_ops = {
|
|
.hw_params = tas2552_hw_params,
|
|
.set_sysclk = tas2552_set_dai_sysclk,
|
|
.set_fmt = tas2552_set_dai_fmt,
|
|
.digital_mute = tas2552_mute,
|
|
};
|
|
|
|
/* Formats supported by TAS2552 driver. */
|
|
#define TAS2552_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
|
|
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
|
|
|
|
/* TAS2552 dai structure. */
|
|
static struct snd_soc_dai_driver tas2552_dai[] = {
|
|
{
|
|
.name = "tas2552-amplifier",
|
|
.playback = {
|
|
.stream_name = "Playback",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = SNDRV_PCM_RATE_8000_192000,
|
|
.formats = TAS2552_FORMATS,
|
|
},
|
|
.ops = &tas2552_speaker_dai_ops,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* DAC digital volumes. From -7 to 24 dB in 1 dB steps
|
|
*/
|
|
static DECLARE_TLV_DB_SCALE(dac_tlv, -7, 100, 24);
|
|
|
|
static const struct snd_kcontrol_new tas2552_snd_controls[] = {
|
|
SOC_SINGLE_TLV("Speaker Driver Playback Volume",
|
|
TAS2552_PGA_GAIN, 0, 0x1f, 1, dac_tlv),
|
|
SOC_DAPM_SINGLE("Playback AMP", SND_SOC_NOPM, 0, 1, 0),
|
|
};
|
|
|
|
static const struct reg_default tas2552_init_regs[] = {
|
|
{ TAS2552_RESERVED_0D, 0xc0 },
|
|
};
|
|
|
|
static int tas2552_codec_probe(struct snd_soc_codec *codec)
|
|
{
|
|
struct tas2552_data *tas2552 = snd_soc_codec_get_drvdata(codec);
|
|
int ret;
|
|
|
|
tas2552->codec = codec;
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(tas2552->supplies),
|
|
tas2552->supplies);
|
|
|
|
if (ret != 0) {
|
|
dev_err(codec->dev, "Failed to enable supplies: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
if (tas2552->enable_gpio)
|
|
gpiod_set_value(tas2552->enable_gpio, 1);
|
|
|
|
ret = pm_runtime_get_sync(codec->dev);
|
|
if (ret < 0) {
|
|
dev_err(codec->dev, "Enabling device failed: %d\n",
|
|
ret);
|
|
goto probe_fail;
|
|
}
|
|
|
|
snd_soc_write(codec, TAS2552_CFG_1, TAS2552_MUTE_MASK |
|
|
TAS2552_PLL_SRC_BCLK);
|
|
snd_soc_write(codec, TAS2552_CFG_3, TAS2552_I2S_OUT_SEL |
|
|
TAS2552_DIN_SRC_SEL_AVG_L_R | TAS2552_88_96KHZ);
|
|
snd_soc_write(codec, TAS2552_DOUT, TAS2552_PDM_DATA_I);
|
|
snd_soc_write(codec, TAS2552_OUTPUT_DATA, TAS2552_PDM_DATA_V_I | 0x8);
|
|
snd_soc_write(codec, TAS2552_PDM_CFG, TAS2552_PDM_BCLK_SEL);
|
|
snd_soc_write(codec, TAS2552_BOOST_PT_CTRL, TAS2552_APT_DELAY_200 |
|
|
TAS2552_APT_THRESH_2_1_7);
|
|
|
|
ret = regmap_register_patch(tas2552->regmap, tas2552_init_regs,
|
|
ARRAY_SIZE(tas2552_init_regs));
|
|
if (ret != 0) {
|
|
dev_err(codec->dev, "Failed to write init registers: %d\n",
|
|
ret);
|
|
goto patch_fail;
|
|
}
|
|
|
|
snd_soc_write(codec, TAS2552_CFG_2, TAS2552_BOOST_EN |
|
|
TAS2552_APT_EN | TAS2552_LIM_EN);
|
|
|
|
return 0;
|
|
|
|
patch_fail:
|
|
pm_runtime_put(codec->dev);
|
|
probe_fail:
|
|
if (tas2552->enable_gpio)
|
|
gpiod_set_value(tas2552->enable_gpio, 0);
|
|
|
|
regulator_bulk_disable(ARRAY_SIZE(tas2552->supplies),
|
|
tas2552->supplies);
|
|
return -EIO;
|
|
}
|
|
|
|
static int tas2552_codec_remove(struct snd_soc_codec *codec)
|
|
{
|
|
struct tas2552_data *tas2552 = snd_soc_codec_get_drvdata(codec);
|
|
|
|
pm_runtime_put(codec->dev);
|
|
|
|
if (tas2552->enable_gpio)
|
|
gpiod_set_value(tas2552->enable_gpio, 0);
|
|
|
|
return 0;
|
|
};
|
|
|
|
#ifdef CONFIG_PM
|
|
static int tas2552_suspend(struct snd_soc_codec *codec)
|
|
{
|
|
struct tas2552_data *tas2552 = snd_soc_codec_get_drvdata(codec);
|
|
int ret;
|
|
|
|
ret = regulator_bulk_disable(ARRAY_SIZE(tas2552->supplies),
|
|
tas2552->supplies);
|
|
|
|
if (ret != 0)
|
|
dev_err(codec->dev, "Failed to disable supplies: %d\n",
|
|
ret);
|
|
return 0;
|
|
}
|
|
|
|
static int tas2552_resume(struct snd_soc_codec *codec)
|
|
{
|
|
struct tas2552_data *tas2552 = snd_soc_codec_get_drvdata(codec);
|
|
int ret;
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(tas2552->supplies),
|
|
tas2552->supplies);
|
|
|
|
if (ret != 0) {
|
|
dev_err(codec->dev, "Failed to enable supplies: %d\n",
|
|
ret);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
#define tas2552_suspend NULL
|
|
#define tas2552_resume NULL
|
|
#endif
|
|
|
|
static struct snd_soc_codec_driver soc_codec_dev_tas2552 = {
|
|
.probe = tas2552_codec_probe,
|
|
.remove = tas2552_codec_remove,
|
|
.suspend = tas2552_suspend,
|
|
.resume = tas2552_resume,
|
|
.controls = tas2552_snd_controls,
|
|
.num_controls = ARRAY_SIZE(tas2552_snd_controls),
|
|
.dapm_widgets = tas2552_dapm_widgets,
|
|
.num_dapm_widgets = ARRAY_SIZE(tas2552_dapm_widgets),
|
|
.dapm_routes = tas2552_audio_map,
|
|
.num_dapm_routes = ARRAY_SIZE(tas2552_audio_map),
|
|
};
|
|
|
|
static const struct regmap_config tas2552_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.max_register = TAS2552_MAX_REG,
|
|
.reg_defaults = tas2552_reg_defs,
|
|
.num_reg_defaults = ARRAY_SIZE(tas2552_reg_defs),
|
|
.cache_type = REGCACHE_RBTREE,
|
|
};
|
|
|
|
static int tas2552_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev;
|
|
struct tas2552_data *data;
|
|
int ret;
|
|
int i;
|
|
|
|
dev = &client->dev;
|
|
data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
|
|
if (data == NULL)
|
|
return -ENOMEM;
|
|
|
|
data->enable_gpio = devm_gpiod_get(dev, "enable");
|
|
if (IS_ERR(data->enable_gpio)) {
|
|
ret = PTR_ERR(data->enable_gpio);
|
|
if (ret != -ENOENT && ret != -ENOSYS)
|
|
return ret;
|
|
|
|
data->enable_gpio = NULL;
|
|
} else {
|
|
gpiod_direction_output(data->enable_gpio, 0);
|
|
}
|
|
|
|
data->tas2552_client = client;
|
|
data->regmap = devm_regmap_init_i2c(client, &tas2552_regmap_config);
|
|
if (IS_ERR(data->regmap)) {
|
|
ret = PTR_ERR(data->regmap);
|
|
dev_err(&client->dev, "Failed to allocate register map: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(data->supplies); i++)
|
|
data->supplies[i].supply = tas2552_supply_names[i];
|
|
|
|
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->supplies),
|
|
data->supplies);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to request supplies: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
pm_runtime_set_active(&client->dev);
|
|
pm_runtime_set_autosuspend_delay(&client->dev, 1000);
|
|
pm_runtime_use_autosuspend(&client->dev);
|
|
pm_runtime_enable(&client->dev);
|
|
pm_runtime_mark_last_busy(&client->dev);
|
|
pm_runtime_put_sync_autosuspend(&client->dev);
|
|
|
|
dev_set_drvdata(&client->dev, data);
|
|
|
|
ret = snd_soc_register_codec(&client->dev,
|
|
&soc_codec_dev_tas2552,
|
|
tas2552_dai, ARRAY_SIZE(tas2552_dai));
|
|
if (ret < 0)
|
|
dev_err(&client->dev, "Failed to register codec: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int tas2552_i2c_remove(struct i2c_client *client)
|
|
{
|
|
snd_soc_unregister_codec(&client->dev);
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id tas2552_id[] = {
|
|
{ "tas2552", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, tas2552_id);
|
|
|
|
#if IS_ENABLED(CONFIG_OF)
|
|
static const struct of_device_id tas2552_of_match[] = {
|
|
{ .compatible = "ti,tas2552", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, tas2552_of_match);
|
|
#endif
|
|
|
|
static struct i2c_driver tas2552_i2c_driver = {
|
|
.driver = {
|
|
.name = "tas2552",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = of_match_ptr(tas2552_of_match),
|
|
.pm = &tas2552_pm,
|
|
},
|
|
.probe = tas2552_probe,
|
|
.remove = tas2552_i2c_remove,
|
|
.id_table = tas2552_id,
|
|
};
|
|
|
|
module_i2c_driver(tas2552_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Dan Muprhy <dmurphy@ti.com>");
|
|
MODULE_DESCRIPTION("TAS2552 Audio amplifier driver");
|
|
MODULE_LICENSE("GPL");
|