mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 00:47:11 +07:00
25e8a3837d
On Bay Trail devices the MIPI power on/off sequences for DSI LCD panels do not control the LCD panel- and backlight-enable GPIOs. So far, when the VBT indicates we should use the SoC for backlight control, we have been relying on these GPIOs being configured as output and driven high by the Video BIOS (GOP) when it initializes the panel. This does not work when the device is booted with a HDMI monitor connected as then the GOP will initialize the HDMI instead of the panel, leaving the panel black, even though the i915 driver tries to output an image to it. Likewise on some device-models when the GOP does not initialize the DSI panel it also leaves the mux of the PWM0 pin in generic GPIO mode instead of muxing it to the PWM controller. This commit makes the DSI code control the SoC GPIOs for panel- and backlight-enable on BYT, when the VBT indicates the SoC should be used for backlight control. It also ensures that the PWM0 pin is muxed to the PWM controller in this case. This fixes the LCD panel not lighting up on various devices when booted with a HDMI monitor connected. This has been tested to fix this on the following devices: Peaq C1010 Point of View MOBII TAB-P800W Point of View MOBII TAB-P1005W Terra Pad 1061 Yours Y8W81 Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191216205122.1850923-6-hdegoede@redhat.com |
||
|---|---|---|
| .. | ||
| drm | ||
| host1x | ||
| ipu-v3 | ||
| vga | ||
| Makefile | ||