mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-15 10:36:55 +07:00
d97f5b9804
This patch adds driver data (bank list and EINT layout) for Exynos3250 to pinctrl-exynos driver. Exynos3250 includes 158 multi-functional input/output ports. There are 23 general port groups. Changes from v1: - Add signed-off of sender - Post only separated patch for pinctrl from following patchset(v1) : https://lkml.org/lkml/2014/4/10/286 Cc: Thomas Abraham <thomas.abraham@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
268 lines
8.6 KiB
C
268 lines
8.6 KiB
C
/*
|
|
* pin-controller/pin-mux/pin-config/gpio-driver for Samsung's SoC's.
|
|
*
|
|
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
* Copyright (c) 2012 Linaro Ltd
|
|
* http://www.linaro.org
|
|
*
|
|
* Author: Thomas Abraham <thomas.ab@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#ifndef __PINCTRL_SAMSUNG_H
|
|
#define __PINCTRL_SAMSUNG_H
|
|
|
|
#include <linux/pinctrl/pinctrl.h>
|
|
#include <linux/pinctrl/pinmux.h>
|
|
#include <linux/pinctrl/pinconf.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/pinctrl/machine.h>
|
|
|
|
#include <linux/gpio.h>
|
|
|
|
/* pinmux function number for pin as gpio output line */
|
|
#define FUNC_OUTPUT 0x1
|
|
|
|
/**
|
|
* enum pincfg_type - possible pin configuration types supported.
|
|
* @PINCFG_TYPE_FUNC: Function configuration.
|
|
* @PINCFG_TYPE_DAT: Pin value configuration.
|
|
* @PINCFG_TYPE_PUD: Pull up/down configuration.
|
|
* @PINCFG_TYPE_DRV: Drive strength configuration.
|
|
* @PINCFG_TYPE_CON_PDN: Pin function in power down mode.
|
|
* @PINCFG_TYPE_PUD_PDN: Pull up/down configuration in power down mode.
|
|
*/
|
|
enum pincfg_type {
|
|
PINCFG_TYPE_FUNC,
|
|
PINCFG_TYPE_DAT,
|
|
PINCFG_TYPE_PUD,
|
|
PINCFG_TYPE_DRV,
|
|
PINCFG_TYPE_CON_PDN,
|
|
PINCFG_TYPE_PUD_PDN,
|
|
|
|
PINCFG_TYPE_NUM
|
|
};
|
|
|
|
/*
|
|
* pin configuration (pull up/down and drive strength) type and its value are
|
|
* packed together into a 16-bits. The upper 8-bits represent the configuration
|
|
* type and the lower 8-bits hold the value of the configuration type.
|
|
*/
|
|
#define PINCFG_TYPE_MASK 0xFF
|
|
#define PINCFG_VALUE_SHIFT 8
|
|
#define PINCFG_VALUE_MASK (0xFF << PINCFG_VALUE_SHIFT)
|
|
#define PINCFG_PACK(type, value) (((value) << PINCFG_VALUE_SHIFT) | type)
|
|
#define PINCFG_UNPACK_TYPE(cfg) ((cfg) & PINCFG_TYPE_MASK)
|
|
#define PINCFG_UNPACK_VALUE(cfg) (((cfg) & PINCFG_VALUE_MASK) >> \
|
|
PINCFG_VALUE_SHIFT)
|
|
/**
|
|
* enum eint_type - possible external interrupt types.
|
|
* @EINT_TYPE_NONE: bank does not support external interrupts
|
|
* @EINT_TYPE_GPIO: bank supportes external gpio interrupts
|
|
* @EINT_TYPE_WKUP: bank supportes external wakeup interrupts
|
|
* @EINT_TYPE_WKUP_MUX: bank supports multiplexed external wakeup interrupts
|
|
*
|
|
* Samsung GPIO controller groups all the available pins into banks. The pins
|
|
* in a pin bank can support external gpio interrupts or external wakeup
|
|
* interrupts or no interrupts at all. From a software perspective, the only
|
|
* difference between external gpio and external wakeup interrupts is that
|
|
* the wakeup interrupts can additionally wakeup the system if it is in
|
|
* suspended state.
|
|
*/
|
|
enum eint_type {
|
|
EINT_TYPE_NONE,
|
|
EINT_TYPE_GPIO,
|
|
EINT_TYPE_WKUP,
|
|
EINT_TYPE_WKUP_MUX,
|
|
};
|
|
|
|
/* maximum length of a pin in pin descriptor (example: "gpa0-0") */
|
|
#define PIN_NAME_LENGTH 10
|
|
|
|
#define PIN_GROUP(n, p, f) \
|
|
{ \
|
|
.name = n, \
|
|
.pins = p, \
|
|
.num_pins = ARRAY_SIZE(p), \
|
|
.func = f \
|
|
}
|
|
|
|
#define PMX_FUNC(n, g) \
|
|
{ \
|
|
.name = n, \
|
|
.groups = g, \
|
|
.num_groups = ARRAY_SIZE(g), \
|
|
}
|
|
|
|
struct samsung_pinctrl_drv_data;
|
|
|
|
/**
|
|
* struct samsung_pin_bank_type: pin bank type description
|
|
* @fld_width: widths of configuration bitfields (0 if unavailable)
|
|
* @reg_offset: offsets of configuration registers (don't care of width is 0)
|
|
*/
|
|
struct samsung_pin_bank_type {
|
|
u8 fld_width[PINCFG_TYPE_NUM];
|
|
u8 reg_offset[PINCFG_TYPE_NUM];
|
|
};
|
|
|
|
/**
|
|
* struct samsung_pin_bank: represent a controller pin-bank.
|
|
* @type: type of the bank (register offsets and bitfield widths)
|
|
* @pctl_offset: starting offset of the pin-bank registers.
|
|
* @pin_base: starting pin number of the bank.
|
|
* @nr_pins: number of pins included in this bank.
|
|
* @eint_func: function to set in CON register to configure pin as EINT.
|
|
* @eint_type: type of the external interrupt supported by the bank.
|
|
* @eint_mask: bit mask of pins which support EINT function.
|
|
* @name: name to be prefixed for each pin in this pin bank.
|
|
* @of_node: OF node of the bank.
|
|
* @drvdata: link to controller driver data
|
|
* @irq_domain: IRQ domain of the bank.
|
|
* @gpio_chip: GPIO chip of the bank.
|
|
* @grange: linux gpio pin range supported by this bank.
|
|
* @slock: spinlock protecting bank registers
|
|
* @pm_save: saved register values during suspend
|
|
*/
|
|
struct samsung_pin_bank {
|
|
struct samsung_pin_bank_type *type;
|
|
u32 pctl_offset;
|
|
u32 pin_base;
|
|
u8 nr_pins;
|
|
u8 eint_func;
|
|
enum eint_type eint_type;
|
|
u32 eint_mask;
|
|
u32 eint_offset;
|
|
char *name;
|
|
void *soc_priv;
|
|
struct device_node *of_node;
|
|
struct samsung_pinctrl_drv_data *drvdata;
|
|
struct irq_domain *irq_domain;
|
|
struct gpio_chip gpio_chip;
|
|
struct pinctrl_gpio_range grange;
|
|
spinlock_t slock;
|
|
|
|
u32 pm_save[PINCFG_TYPE_NUM + 1]; /* +1 to handle double CON registers*/
|
|
};
|
|
|
|
/**
|
|
* struct samsung_pin_ctrl: represent a pin controller.
|
|
* @pin_banks: list of pin banks included in this controller.
|
|
* @nr_banks: number of pin banks.
|
|
* @base: starting system wide pin number.
|
|
* @nr_pins: number of pins supported by the controller.
|
|
* @geint_con: offset of the ext-gpio controller registers.
|
|
* @geint_mask: offset of the ext-gpio interrupt mask registers.
|
|
* @geint_pend: offset of the ext-gpio interrupt pending registers.
|
|
* @weint_con: offset of the ext-wakeup controller registers.
|
|
* @weint_mask: offset of the ext-wakeup interrupt mask registers.
|
|
* @weint_pend: offset of the ext-wakeup interrupt pending registers.
|
|
* @svc: offset of the interrupt service register.
|
|
* @eint_gpio_init: platform specific callback to setup the external gpio
|
|
* interrupts for the controller.
|
|
* @eint_wkup_init: platform specific callback to setup the external wakeup
|
|
* interrupts for the controller.
|
|
* @label: for debug information.
|
|
*/
|
|
struct samsung_pin_ctrl {
|
|
struct samsung_pin_bank *pin_banks;
|
|
u32 nr_banks;
|
|
|
|
u32 base;
|
|
u32 nr_pins;
|
|
|
|
u32 geint_con;
|
|
u32 geint_mask;
|
|
u32 geint_pend;
|
|
|
|
u32 weint_con;
|
|
u32 weint_mask;
|
|
u32 weint_pend;
|
|
|
|
u32 svc;
|
|
|
|
int (*eint_gpio_init)(struct samsung_pinctrl_drv_data *);
|
|
int (*eint_wkup_init)(struct samsung_pinctrl_drv_data *);
|
|
void (*suspend)(struct samsung_pinctrl_drv_data *);
|
|
void (*resume)(struct samsung_pinctrl_drv_data *);
|
|
|
|
char *label;
|
|
};
|
|
|
|
/**
|
|
* struct samsung_pinctrl_drv_data: wrapper for holding driver data together.
|
|
* @node: global list node
|
|
* @virt_base: register base address of the controller.
|
|
* @dev: device instance representing the controller.
|
|
* @irq: interrpt number used by the controller to notify gpio interrupts.
|
|
* @ctrl: pin controller instance managed by the driver.
|
|
* @pctl: pin controller descriptor registered with the pinctrl subsystem.
|
|
* @pctl_dev: cookie representing pinctrl device instance.
|
|
* @pin_groups: list of pin groups available to the driver.
|
|
* @nr_groups: number of such pin groups.
|
|
* @pmx_functions: list of pin functions available to the driver.
|
|
* @nr_function: number of such pin functions.
|
|
*/
|
|
struct samsung_pinctrl_drv_data {
|
|
struct list_head node;
|
|
void __iomem *virt_base;
|
|
struct device *dev;
|
|
int irq;
|
|
|
|
struct samsung_pin_ctrl *ctrl;
|
|
struct pinctrl_desc pctl;
|
|
struct pinctrl_dev *pctl_dev;
|
|
|
|
const struct samsung_pin_group *pin_groups;
|
|
unsigned int nr_groups;
|
|
const struct samsung_pmx_func *pmx_functions;
|
|
unsigned int nr_functions;
|
|
};
|
|
|
|
/**
|
|
* struct samsung_pin_group: represent group of pins of a pinmux function.
|
|
* @name: name of the pin group, used to lookup the group.
|
|
* @pins: the pins included in this group.
|
|
* @num_pins: number of pins included in this group.
|
|
* @func: the function number to be programmed when selected.
|
|
*/
|
|
struct samsung_pin_group {
|
|
const char *name;
|
|
const unsigned int *pins;
|
|
u8 num_pins;
|
|
u8 func;
|
|
};
|
|
|
|
/**
|
|
* struct samsung_pmx_func: represent a pin function.
|
|
* @name: name of the pin function, used to lookup the function.
|
|
* @groups: one or more names of pin groups that provide this function.
|
|
* @num_groups: number of groups included in @groups.
|
|
*/
|
|
struct samsung_pmx_func {
|
|
const char *name;
|
|
const char **groups;
|
|
u8 num_groups;
|
|
};
|
|
|
|
/* list of all exported SoC specific data */
|
|
extern struct samsung_pin_ctrl exynos3250_pin_ctrl[];
|
|
extern struct samsung_pin_ctrl exynos4210_pin_ctrl[];
|
|
extern struct samsung_pin_ctrl exynos4x12_pin_ctrl[];
|
|
extern struct samsung_pin_ctrl exynos5250_pin_ctrl[];
|
|
extern struct samsung_pin_ctrl exynos5260_pin_ctrl[];
|
|
extern struct samsung_pin_ctrl exynos5420_pin_ctrl[];
|
|
extern struct samsung_pin_ctrl s3c64xx_pin_ctrl[];
|
|
extern struct samsung_pin_ctrl s3c2412_pin_ctrl[];
|
|
extern struct samsung_pin_ctrl s3c2416_pin_ctrl[];
|
|
extern struct samsung_pin_ctrl s3c2440_pin_ctrl[];
|
|
extern struct samsung_pin_ctrl s3c2450_pin_ctrl[];
|
|
extern struct samsung_pin_ctrl s5pv210_pin_ctrl[];
|
|
|
|
#endif /* __PINCTRL_SAMSUNG_H */
|