mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-26 19:30:53 +07:00
d2e7b3425c
Modify the driver so that it does not function when the interface is down, in preparation for runtime power management. No commands can be run while the interface is down, so the ndo_dev_stop routine now directly does all necessary work (including asking the device to disconnect from the network and disabling multicast functionality) directly. power_save and power_restore hooks are added meaning that card drivers can take steps to turn the device off when the interface is down. The MAC address can now only be changed when all interfaces are down; the new address will be programmed when an interface gets brought up. This matches mac80211 behaviour. Also, some small cleanups/simplifications were made in the surrounding device handling logic. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
1192 lines
30 KiB
C
1192 lines
30 KiB
C
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/hardirq.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/if_ether.h>
|
|
#include <linux/if_arp.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/kfifo.h>
|
|
#include <net/cfg80211.h>
|
|
|
|
#include "mesh.h"
|
|
#include "decl.h"
|
|
#include "cmd.h"
|
|
|
|
|
|
static int lbs_add_mesh(struct lbs_private *priv);
|
|
|
|
/***************************************************************************
|
|
* Mesh command handling
|
|
*/
|
|
|
|
static int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action,
|
|
struct cmd_ds_mesh_access *cmd)
|
|
{
|
|
int ret;
|
|
|
|
lbs_deb_enter_args(LBS_DEB_CMD, "action %d", cmd_action);
|
|
|
|
cmd->hdr.command = cpu_to_le16(CMD_MESH_ACCESS);
|
|
cmd->hdr.size = cpu_to_le16(sizeof(*cmd));
|
|
cmd->hdr.result = 0;
|
|
|
|
cmd->action = cpu_to_le16(cmd_action);
|
|
|
|
ret = lbs_cmd_with_response(priv, CMD_MESH_ACCESS, cmd);
|
|
|
|
lbs_deb_leave(LBS_DEB_CMD);
|
|
return ret;
|
|
}
|
|
|
|
static int __lbs_mesh_config_send(struct lbs_private *priv,
|
|
struct cmd_ds_mesh_config *cmd,
|
|
uint16_t action, uint16_t type)
|
|
{
|
|
int ret;
|
|
u16 command = CMD_MESH_CONFIG_OLD;
|
|
|
|
lbs_deb_enter(LBS_DEB_CMD);
|
|
|
|
/*
|
|
* Command id is 0xac for v10 FW along with mesh interface
|
|
* id in bits 14-13-12.
|
|
*/
|
|
if (priv->mesh_tlv == TLV_TYPE_MESH_ID)
|
|
command = CMD_MESH_CONFIG |
|
|
(MESH_IFACE_ID << MESH_IFACE_BIT_OFFSET);
|
|
|
|
cmd->hdr.command = cpu_to_le16(command);
|
|
cmd->hdr.size = cpu_to_le16(sizeof(struct cmd_ds_mesh_config));
|
|
cmd->hdr.result = 0;
|
|
|
|
cmd->type = cpu_to_le16(type);
|
|
cmd->action = cpu_to_le16(action);
|
|
|
|
ret = lbs_cmd_with_response(priv, command, cmd);
|
|
|
|
lbs_deb_leave(LBS_DEB_CMD);
|
|
return ret;
|
|
}
|
|
|
|
static int lbs_mesh_config_send(struct lbs_private *priv,
|
|
struct cmd_ds_mesh_config *cmd,
|
|
uint16_t action, uint16_t type)
|
|
{
|
|
int ret;
|
|
|
|
if (!(priv->fwcapinfo & FW_CAPINFO_PERSISTENT_CONFIG))
|
|
return -EOPNOTSUPP;
|
|
|
|
ret = __lbs_mesh_config_send(priv, cmd, action, type);
|
|
return ret;
|
|
}
|
|
|
|
/* This function is the CMD_MESH_CONFIG legacy function. It only handles the
|
|
* START and STOP actions. The extended actions supported by CMD_MESH_CONFIG
|
|
* are all handled by preparing a struct cmd_ds_mesh_config and passing it to
|
|
* lbs_mesh_config_send.
|
|
*/
|
|
static int lbs_mesh_config(struct lbs_private *priv, uint16_t action,
|
|
uint16_t chan)
|
|
{
|
|
struct cmd_ds_mesh_config cmd;
|
|
struct mrvl_meshie *ie;
|
|
DECLARE_SSID_BUF(ssid);
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
cmd.channel = cpu_to_le16(chan);
|
|
ie = (struct mrvl_meshie *)cmd.data;
|
|
|
|
switch (action) {
|
|
case CMD_ACT_MESH_CONFIG_START:
|
|
ie->id = WLAN_EID_GENERIC;
|
|
ie->val.oui[0] = 0x00;
|
|
ie->val.oui[1] = 0x50;
|
|
ie->val.oui[2] = 0x43;
|
|
ie->val.type = MARVELL_MESH_IE_TYPE;
|
|
ie->val.subtype = MARVELL_MESH_IE_SUBTYPE;
|
|
ie->val.version = MARVELL_MESH_IE_VERSION;
|
|
ie->val.active_protocol_id = MARVELL_MESH_PROTO_ID_HWMP;
|
|
ie->val.active_metric_id = MARVELL_MESH_METRIC_ID;
|
|
ie->val.mesh_capability = MARVELL_MESH_CAPABILITY;
|
|
ie->val.mesh_id_len = priv->mesh_ssid_len;
|
|
memcpy(ie->val.mesh_id, priv->mesh_ssid, priv->mesh_ssid_len);
|
|
ie->len = sizeof(struct mrvl_meshie_val) -
|
|
IEEE80211_MAX_SSID_LEN + priv->mesh_ssid_len;
|
|
cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie_val));
|
|
break;
|
|
case CMD_ACT_MESH_CONFIG_STOP:
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
lbs_deb_cmd("mesh config action %d type %x channel %d SSID %s\n",
|
|
action, priv->mesh_tlv, chan,
|
|
print_ssid(ssid, priv->mesh_ssid, priv->mesh_ssid_len));
|
|
|
|
return __lbs_mesh_config_send(priv, &cmd, action, priv->mesh_tlv);
|
|
}
|
|
|
|
int lbs_mesh_set_channel(struct lbs_private *priv, u8 channel)
|
|
{
|
|
return lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START, channel);
|
|
}
|
|
|
|
static uint16_t lbs_mesh_get_channel(struct lbs_private *priv)
|
|
{
|
|
struct wireless_dev *mesh_wdev = priv->mesh_dev->ieee80211_ptr;
|
|
if (mesh_wdev->channel)
|
|
return mesh_wdev->channel->hw_value;
|
|
else
|
|
return 1;
|
|
}
|
|
|
|
/***************************************************************************
|
|
* Mesh sysfs support
|
|
*/
|
|
|
|
/*
|
|
* Attributes exported through sysfs
|
|
*/
|
|
|
|
/**
|
|
* lbs_anycast_get - Get function for sysfs attribute anycast_mask
|
|
* @dev: the &struct device
|
|
* @attr: device attributes
|
|
* @buf: buffer where data will be returned
|
|
*/
|
|
static ssize_t lbs_anycast_get(struct device *dev,
|
|
struct device_attribute *attr, char * buf)
|
|
{
|
|
struct lbs_private *priv = to_net_dev(dev)->ml_priv;
|
|
struct cmd_ds_mesh_access mesh_access;
|
|
int ret;
|
|
|
|
memset(&mesh_access, 0, sizeof(mesh_access));
|
|
|
|
ret = lbs_mesh_access(priv, CMD_ACT_MESH_GET_ANYCAST, &mesh_access);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return snprintf(buf, 12, "0x%X\n", le32_to_cpu(mesh_access.data[0]));
|
|
}
|
|
|
|
/**
|
|
* lbs_anycast_set - Set function for sysfs attribute anycast_mask
|
|
* @dev: the &struct device
|
|
* @attr: device attributes
|
|
* @buf: buffer that contains new attribute value
|
|
* @count: size of buffer
|
|
*/
|
|
static ssize_t lbs_anycast_set(struct device *dev,
|
|
struct device_attribute *attr, const char * buf, size_t count)
|
|
{
|
|
struct lbs_private *priv = to_net_dev(dev)->ml_priv;
|
|
struct cmd_ds_mesh_access mesh_access;
|
|
uint32_t datum;
|
|
int ret;
|
|
|
|
memset(&mesh_access, 0, sizeof(mesh_access));
|
|
sscanf(buf, "%x", &datum);
|
|
mesh_access.data[0] = cpu_to_le32(datum);
|
|
|
|
ret = lbs_mesh_access(priv, CMD_ACT_MESH_SET_ANYCAST, &mesh_access);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return strlen(buf);
|
|
}
|
|
|
|
/**
|
|
* lbs_prb_rsp_limit_get - Get function for sysfs attribute prb_rsp_limit
|
|
* @dev: the &struct device
|
|
* @attr: device attributes
|
|
* @buf: buffer where data will be returned
|
|
*/
|
|
static ssize_t lbs_prb_rsp_limit_get(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct lbs_private *priv = to_net_dev(dev)->ml_priv;
|
|
struct cmd_ds_mesh_access mesh_access;
|
|
int ret;
|
|
u32 retry_limit;
|
|
|
|
memset(&mesh_access, 0, sizeof(mesh_access));
|
|
mesh_access.data[0] = cpu_to_le32(CMD_ACT_GET);
|
|
|
|
ret = lbs_mesh_access(priv, CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT,
|
|
&mesh_access);
|
|
if (ret)
|
|
return ret;
|
|
|
|
retry_limit = le32_to_cpu(mesh_access.data[1]);
|
|
return snprintf(buf, 10, "%d\n", retry_limit);
|
|
}
|
|
|
|
/**
|
|
* lbs_prb_rsp_limit_set - Set function for sysfs attribute prb_rsp_limit
|
|
* @dev: the &struct device
|
|
* @attr: device attributes
|
|
* @buf: buffer that contains new attribute value
|
|
* @count: size of buffer
|
|
*/
|
|
static ssize_t lbs_prb_rsp_limit_set(struct device *dev,
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
struct lbs_private *priv = to_net_dev(dev)->ml_priv;
|
|
struct cmd_ds_mesh_access mesh_access;
|
|
int ret;
|
|
unsigned long retry_limit;
|
|
|
|
memset(&mesh_access, 0, sizeof(mesh_access));
|
|
mesh_access.data[0] = cpu_to_le32(CMD_ACT_SET);
|
|
|
|
if (!strict_strtoul(buf, 10, &retry_limit))
|
|
return -ENOTSUPP;
|
|
if (retry_limit > 15)
|
|
return -ENOTSUPP;
|
|
|
|
mesh_access.data[1] = cpu_to_le32(retry_limit);
|
|
|
|
ret = lbs_mesh_access(priv, CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT,
|
|
&mesh_access);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return strlen(buf);
|
|
}
|
|
|
|
/**
|
|
* lbs_mesh_get - Get function for sysfs attribute mesh
|
|
* @dev: the &struct device
|
|
* @attr: device attributes
|
|
* @buf: buffer where data will be returned
|
|
*/
|
|
static ssize_t lbs_mesh_get(struct device *dev,
|
|
struct device_attribute *attr, char * buf)
|
|
{
|
|
struct lbs_private *priv = to_net_dev(dev)->ml_priv;
|
|
return snprintf(buf, 5, "0x%X\n", !!priv->mesh_dev);
|
|
}
|
|
|
|
/**
|
|
* lbs_mesh_set - Set function for sysfs attribute mesh
|
|
* @dev: the &struct device
|
|
* @attr: device attributes
|
|
* @buf: buffer that contains new attribute value
|
|
* @count: size of buffer
|
|
*/
|
|
static ssize_t lbs_mesh_set(struct device *dev,
|
|
struct device_attribute *attr, const char * buf, size_t count)
|
|
{
|
|
struct lbs_private *priv = to_net_dev(dev)->ml_priv;
|
|
int enable;
|
|
|
|
sscanf(buf, "%x", &enable);
|
|
enable = !!enable;
|
|
if (enable == !!priv->mesh_dev)
|
|
return count;
|
|
|
|
if (enable)
|
|
lbs_add_mesh(priv);
|
|
else
|
|
lbs_remove_mesh(priv);
|
|
|
|
return count;
|
|
}
|
|
|
|
/*
|
|
* lbs_mesh attribute to be exported per ethX interface
|
|
* through sysfs (/sys/class/net/ethX/lbs_mesh)
|
|
*/
|
|
static DEVICE_ATTR(lbs_mesh, 0644, lbs_mesh_get, lbs_mesh_set);
|
|
|
|
/*
|
|
* anycast_mask attribute to be exported per mshX interface
|
|
* through sysfs (/sys/class/net/mshX/anycast_mask)
|
|
*/
|
|
static DEVICE_ATTR(anycast_mask, 0644, lbs_anycast_get, lbs_anycast_set);
|
|
|
|
/*
|
|
* prb_rsp_limit attribute to be exported per mshX interface
|
|
* through sysfs (/sys/class/net/mshX/prb_rsp_limit)
|
|
*/
|
|
static DEVICE_ATTR(prb_rsp_limit, 0644, lbs_prb_rsp_limit_get,
|
|
lbs_prb_rsp_limit_set);
|
|
|
|
static struct attribute *lbs_mesh_sysfs_entries[] = {
|
|
&dev_attr_anycast_mask.attr,
|
|
&dev_attr_prb_rsp_limit.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group lbs_mesh_attr_group = {
|
|
.attrs = lbs_mesh_sysfs_entries,
|
|
};
|
|
|
|
|
|
/***************************************************************************
|
|
* Persistent configuration support
|
|
*/
|
|
|
|
static int mesh_get_default_parameters(struct device *dev,
|
|
struct mrvl_mesh_defaults *defs)
|
|
{
|
|
struct lbs_private *priv = to_net_dev(dev)->ml_priv;
|
|
struct cmd_ds_mesh_config cmd;
|
|
int ret;
|
|
|
|
memset(&cmd, 0, sizeof(struct cmd_ds_mesh_config));
|
|
ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_GET,
|
|
CMD_TYPE_MESH_GET_DEFAULTS);
|
|
|
|
if (ret)
|
|
return -EOPNOTSUPP;
|
|
|
|
memcpy(defs, &cmd.data[0], sizeof(struct mrvl_mesh_defaults));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* bootflag_get - Get function for sysfs attribute bootflag
|
|
* @dev: the &struct device
|
|
* @attr: device attributes
|
|
* @buf: buffer where data will be returned
|
|
*/
|
|
static ssize_t bootflag_get(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct mrvl_mesh_defaults defs;
|
|
int ret;
|
|
|
|
ret = mesh_get_default_parameters(dev, &defs);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
return snprintf(buf, 12, "%d\n", le32_to_cpu(defs.bootflag));
|
|
}
|
|
|
|
/**
|
|
* bootflag_set - Set function for sysfs attribute bootflag
|
|
* @dev: the &struct device
|
|
* @attr: device attributes
|
|
* @buf: buffer that contains new attribute value
|
|
* @count: size of buffer
|
|
*/
|
|
static ssize_t bootflag_set(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct lbs_private *priv = to_net_dev(dev)->ml_priv;
|
|
struct cmd_ds_mesh_config cmd;
|
|
uint32_t datum;
|
|
int ret;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
ret = sscanf(buf, "%d", &datum);
|
|
if ((ret != 1) || (datum > 1))
|
|
return -EINVAL;
|
|
|
|
*((__le32 *)&cmd.data[0]) = cpu_to_le32(!!datum);
|
|
cmd.length = cpu_to_le16(sizeof(uint32_t));
|
|
ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
|
|
CMD_TYPE_MESH_SET_BOOTFLAG);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return strlen(buf);
|
|
}
|
|
|
|
/**
|
|
* boottime_get - Get function for sysfs attribute boottime
|
|
* @dev: the &struct device
|
|
* @attr: device attributes
|
|
* @buf: buffer where data will be returned
|
|
*/
|
|
static ssize_t boottime_get(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct mrvl_mesh_defaults defs;
|
|
int ret;
|
|
|
|
ret = mesh_get_default_parameters(dev, &defs);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
return snprintf(buf, 12, "%d\n", defs.boottime);
|
|
}
|
|
|
|
/**
|
|
* boottime_set - Set function for sysfs attribute boottime
|
|
* @dev: the &struct device
|
|
* @attr: device attributes
|
|
* @buf: buffer that contains new attribute value
|
|
* @count: size of buffer
|
|
*/
|
|
static ssize_t boottime_set(struct device *dev,
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
struct lbs_private *priv = to_net_dev(dev)->ml_priv;
|
|
struct cmd_ds_mesh_config cmd;
|
|
uint32_t datum;
|
|
int ret;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
ret = sscanf(buf, "%d", &datum);
|
|
if ((ret != 1) || (datum > 255))
|
|
return -EINVAL;
|
|
|
|
/* A too small boot time will result in the device booting into
|
|
* standalone (no-host) mode before the host can take control of it,
|
|
* so the change will be hard to revert. This may be a desired
|
|
* feature (e.g to configure a very fast boot time for devices that
|
|
* will not be attached to a host), but dangerous. So I'm enforcing a
|
|
* lower limit of 20 seconds: remove and recompile the driver if this
|
|
* does not work for you.
|
|
*/
|
|
datum = (datum < 20) ? 20 : datum;
|
|
cmd.data[0] = datum;
|
|
cmd.length = cpu_to_le16(sizeof(uint8_t));
|
|
ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
|
|
CMD_TYPE_MESH_SET_BOOTTIME);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return strlen(buf);
|
|
}
|
|
|
|
/**
|
|
* channel_get - Get function for sysfs attribute channel
|
|
* @dev: the &struct device
|
|
* @attr: device attributes
|
|
* @buf: buffer where data will be returned
|
|
*/
|
|
static ssize_t channel_get(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct mrvl_mesh_defaults defs;
|
|
int ret;
|
|
|
|
ret = mesh_get_default_parameters(dev, &defs);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
return snprintf(buf, 12, "%d\n", le16_to_cpu(defs.channel));
|
|
}
|
|
|
|
/**
|
|
* channel_set - Set function for sysfs attribute channel
|
|
* @dev: the &struct device
|
|
* @attr: device attributes
|
|
* @buf: buffer that contains new attribute value
|
|
* @count: size of buffer
|
|
*/
|
|
static ssize_t channel_set(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct lbs_private *priv = to_net_dev(dev)->ml_priv;
|
|
struct cmd_ds_mesh_config cmd;
|
|
uint32_t datum;
|
|
int ret;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
ret = sscanf(buf, "%d", &datum);
|
|
if (ret != 1 || datum < 1 || datum > 11)
|
|
return -EINVAL;
|
|
|
|
*((__le16 *)&cmd.data[0]) = cpu_to_le16(datum);
|
|
cmd.length = cpu_to_le16(sizeof(uint16_t));
|
|
ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
|
|
CMD_TYPE_MESH_SET_DEF_CHANNEL);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return strlen(buf);
|
|
}
|
|
|
|
/**
|
|
* mesh_id_get - Get function for sysfs attribute mesh_id
|
|
* @dev: the &struct device
|
|
* @attr: device attributes
|
|
* @buf: buffer where data will be returned
|
|
*/
|
|
static ssize_t mesh_id_get(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct mrvl_mesh_defaults defs;
|
|
int ret;
|
|
|
|
ret = mesh_get_default_parameters(dev, &defs);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (defs.meshie.val.mesh_id_len > IEEE80211_MAX_SSID_LEN) {
|
|
dev_err(dev, "inconsistent mesh ID length\n");
|
|
defs.meshie.val.mesh_id_len = IEEE80211_MAX_SSID_LEN;
|
|
}
|
|
|
|
memcpy(buf, defs.meshie.val.mesh_id, defs.meshie.val.mesh_id_len);
|
|
buf[defs.meshie.val.mesh_id_len] = '\n';
|
|
buf[defs.meshie.val.mesh_id_len + 1] = '\0';
|
|
|
|
return defs.meshie.val.mesh_id_len + 1;
|
|
}
|
|
|
|
/**
|
|
* mesh_id_set - Set function for sysfs attribute mesh_id
|
|
* @dev: the &struct device
|
|
* @attr: device attributes
|
|
* @buf: buffer that contains new attribute value
|
|
* @count: size of buffer
|
|
*/
|
|
static ssize_t mesh_id_set(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct cmd_ds_mesh_config cmd;
|
|
struct mrvl_mesh_defaults defs;
|
|
struct mrvl_meshie *ie;
|
|
struct lbs_private *priv = to_net_dev(dev)->ml_priv;
|
|
int len;
|
|
int ret;
|
|
|
|
if (count < 2 || count > IEEE80211_MAX_SSID_LEN + 1)
|
|
return -EINVAL;
|
|
|
|
memset(&cmd, 0, sizeof(struct cmd_ds_mesh_config));
|
|
ie = (struct mrvl_meshie *) &cmd.data[0];
|
|
|
|
/* fetch all other Information Element parameters */
|
|
ret = mesh_get_default_parameters(dev, &defs);
|
|
|
|
cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie));
|
|
|
|
/* transfer IE elements */
|
|
memcpy(ie, &defs.meshie, sizeof(struct mrvl_meshie));
|
|
|
|
len = count - 1;
|
|
memcpy(ie->val.mesh_id, buf, len);
|
|
/* SSID len */
|
|
ie->val.mesh_id_len = len;
|
|
/* IE len */
|
|
ie->len = sizeof(struct mrvl_meshie_val) - IEEE80211_MAX_SSID_LEN + len;
|
|
|
|
ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
|
|
CMD_TYPE_MESH_SET_MESH_IE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return strlen(buf);
|
|
}
|
|
|
|
/**
|
|
* protocol_id_get - Get function for sysfs attribute protocol_id
|
|
* @dev: the &struct device
|
|
* @attr: device attributes
|
|
* @buf: buffer where data will be returned
|
|
*/
|
|
static ssize_t protocol_id_get(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct mrvl_mesh_defaults defs;
|
|
int ret;
|
|
|
|
ret = mesh_get_default_parameters(dev, &defs);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
return snprintf(buf, 5, "%d\n", defs.meshie.val.active_protocol_id);
|
|
}
|
|
|
|
/**
|
|
* protocol_id_set - Set function for sysfs attribute protocol_id
|
|
* @dev: the &struct device
|
|
* @attr: device attributes
|
|
* @buf: buffer that contains new attribute value
|
|
* @count: size of buffer
|
|
*/
|
|
static ssize_t protocol_id_set(struct device *dev,
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
struct cmd_ds_mesh_config cmd;
|
|
struct mrvl_mesh_defaults defs;
|
|
struct mrvl_meshie *ie;
|
|
struct lbs_private *priv = to_net_dev(dev)->ml_priv;
|
|
uint32_t datum;
|
|
int ret;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
ret = sscanf(buf, "%d", &datum);
|
|
if ((ret != 1) || (datum > 255))
|
|
return -EINVAL;
|
|
|
|
/* fetch all other Information Element parameters */
|
|
ret = mesh_get_default_parameters(dev, &defs);
|
|
|
|
cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie));
|
|
|
|
/* transfer IE elements */
|
|
ie = (struct mrvl_meshie *) &cmd.data[0];
|
|
memcpy(ie, &defs.meshie, sizeof(struct mrvl_meshie));
|
|
/* update protocol id */
|
|
ie->val.active_protocol_id = datum;
|
|
|
|
ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
|
|
CMD_TYPE_MESH_SET_MESH_IE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return strlen(buf);
|
|
}
|
|
|
|
/**
|
|
* metric_id_get - Get function for sysfs attribute metric_id
|
|
* @dev: the &struct device
|
|
* @attr: device attributes
|
|
* @buf: buffer where data will be returned
|
|
*/
|
|
static ssize_t metric_id_get(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct mrvl_mesh_defaults defs;
|
|
int ret;
|
|
|
|
ret = mesh_get_default_parameters(dev, &defs);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
return snprintf(buf, 5, "%d\n", defs.meshie.val.active_metric_id);
|
|
}
|
|
|
|
/**
|
|
* metric_id_set - Set function for sysfs attribute metric_id
|
|
* @dev: the &struct device
|
|
* @attr: device attributes
|
|
* @buf: buffer that contains new attribute value
|
|
* @count: size of buffer
|
|
*/
|
|
static ssize_t metric_id_set(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct cmd_ds_mesh_config cmd;
|
|
struct mrvl_mesh_defaults defs;
|
|
struct mrvl_meshie *ie;
|
|
struct lbs_private *priv = to_net_dev(dev)->ml_priv;
|
|
uint32_t datum;
|
|
int ret;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
ret = sscanf(buf, "%d", &datum);
|
|
if ((ret != 1) || (datum > 255))
|
|
return -EINVAL;
|
|
|
|
/* fetch all other Information Element parameters */
|
|
ret = mesh_get_default_parameters(dev, &defs);
|
|
|
|
cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie));
|
|
|
|
/* transfer IE elements */
|
|
ie = (struct mrvl_meshie *) &cmd.data[0];
|
|
memcpy(ie, &defs.meshie, sizeof(struct mrvl_meshie));
|
|
/* update metric id */
|
|
ie->val.active_metric_id = datum;
|
|
|
|
ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
|
|
CMD_TYPE_MESH_SET_MESH_IE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return strlen(buf);
|
|
}
|
|
|
|
/**
|
|
* capability_get - Get function for sysfs attribute capability
|
|
* @dev: the &struct device
|
|
* @attr: device attributes
|
|
* @buf: buffer where data will be returned
|
|
*/
|
|
static ssize_t capability_get(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct mrvl_mesh_defaults defs;
|
|
int ret;
|
|
|
|
ret = mesh_get_default_parameters(dev, &defs);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
return snprintf(buf, 5, "%d\n", defs.meshie.val.mesh_capability);
|
|
}
|
|
|
|
/**
|
|
* capability_set - Set function for sysfs attribute capability
|
|
* @dev: the &struct device
|
|
* @attr: device attributes
|
|
* @buf: buffer that contains new attribute value
|
|
* @count: size of buffer
|
|
*/
|
|
static ssize_t capability_set(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct cmd_ds_mesh_config cmd;
|
|
struct mrvl_mesh_defaults defs;
|
|
struct mrvl_meshie *ie;
|
|
struct lbs_private *priv = to_net_dev(dev)->ml_priv;
|
|
uint32_t datum;
|
|
int ret;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
ret = sscanf(buf, "%d", &datum);
|
|
if ((ret != 1) || (datum > 255))
|
|
return -EINVAL;
|
|
|
|
/* fetch all other Information Element parameters */
|
|
ret = mesh_get_default_parameters(dev, &defs);
|
|
|
|
cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie));
|
|
|
|
/* transfer IE elements */
|
|
ie = (struct mrvl_meshie *) &cmd.data[0];
|
|
memcpy(ie, &defs.meshie, sizeof(struct mrvl_meshie));
|
|
/* update value */
|
|
ie->val.mesh_capability = datum;
|
|
|
|
ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
|
|
CMD_TYPE_MESH_SET_MESH_IE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return strlen(buf);
|
|
}
|
|
|
|
|
|
static DEVICE_ATTR(bootflag, 0644, bootflag_get, bootflag_set);
|
|
static DEVICE_ATTR(boottime, 0644, boottime_get, boottime_set);
|
|
static DEVICE_ATTR(channel, 0644, channel_get, channel_set);
|
|
static DEVICE_ATTR(mesh_id, 0644, mesh_id_get, mesh_id_set);
|
|
static DEVICE_ATTR(protocol_id, 0644, protocol_id_get, protocol_id_set);
|
|
static DEVICE_ATTR(metric_id, 0644, metric_id_get, metric_id_set);
|
|
static DEVICE_ATTR(capability, 0644, capability_get, capability_set);
|
|
|
|
static struct attribute *boot_opts_attrs[] = {
|
|
&dev_attr_bootflag.attr,
|
|
&dev_attr_boottime.attr,
|
|
&dev_attr_channel.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group boot_opts_group = {
|
|
.name = "boot_options",
|
|
.attrs = boot_opts_attrs,
|
|
};
|
|
|
|
static struct attribute *mesh_ie_attrs[] = {
|
|
&dev_attr_mesh_id.attr,
|
|
&dev_attr_protocol_id.attr,
|
|
&dev_attr_metric_id.attr,
|
|
&dev_attr_capability.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group mesh_ie_group = {
|
|
.name = "mesh_ie",
|
|
.attrs = mesh_ie_attrs,
|
|
};
|
|
|
|
static void lbs_persist_config_init(struct net_device *dev)
|
|
{
|
|
int ret;
|
|
ret = sysfs_create_group(&(dev->dev.kobj), &boot_opts_group);
|
|
ret = sysfs_create_group(&(dev->dev.kobj), &mesh_ie_group);
|
|
}
|
|
|
|
static void lbs_persist_config_remove(struct net_device *dev)
|
|
{
|
|
sysfs_remove_group(&(dev->dev.kobj), &boot_opts_group);
|
|
sysfs_remove_group(&(dev->dev.kobj), &mesh_ie_group);
|
|
}
|
|
|
|
|
|
/***************************************************************************
|
|
* Initializing and starting, stopping mesh
|
|
*/
|
|
|
|
/*
|
|
* Check mesh FW version and appropriately send the mesh start
|
|
* command
|
|
*/
|
|
int lbs_init_mesh(struct lbs_private *priv)
|
|
{
|
|
int ret = 0;
|
|
|
|
lbs_deb_enter(LBS_DEB_MESH);
|
|
|
|
/* Determine mesh_fw_ver from fwrelease and fwcapinfo */
|
|
/* 5.0.16p0 9.0.0.p0 is known to NOT support any mesh */
|
|
/* 5.110.22 have mesh command with 0xa3 command id */
|
|
/* 10.0.0.p0 FW brings in mesh config command with different id */
|
|
/* Check FW version MSB and initialize mesh_fw_ver */
|
|
if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V5) {
|
|
/* Enable mesh, if supported, and work out which TLV it uses.
|
|
0x100 + 291 is an unofficial value used in 5.110.20.pXX
|
|
0x100 + 37 is the official value used in 5.110.21.pXX
|
|
but we check them in that order because 20.pXX doesn't
|
|
give an error -- it just silently fails. */
|
|
|
|
/* 5.110.20.pXX firmware will fail the command if the channel
|
|
doesn't match the existing channel. But only if the TLV
|
|
is correct. If the channel is wrong, _BOTH_ versions will
|
|
give an error to 0x100+291, and allow 0x100+37 to succeed.
|
|
It's just that 5.110.20.pXX will not have done anything
|
|
useful */
|
|
|
|
priv->mesh_tlv = TLV_TYPE_OLD_MESH_ID;
|
|
if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START, 1)) {
|
|
priv->mesh_tlv = TLV_TYPE_MESH_ID;
|
|
if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START, 1))
|
|
priv->mesh_tlv = 0;
|
|
}
|
|
} else
|
|
if ((MRVL_FW_MAJOR_REV(priv->fwrelease) >= MRVL_FW_V10) &&
|
|
(priv->fwcapinfo & MESH_CAPINFO_ENABLE_MASK)) {
|
|
/* 10.0.0.pXX new firmwares should succeed with TLV
|
|
* 0x100+37; Do not invoke command with old TLV.
|
|
*/
|
|
priv->mesh_tlv = TLV_TYPE_MESH_ID;
|
|
if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START, 1))
|
|
priv->mesh_tlv = 0;
|
|
}
|
|
|
|
/* Stop meshing until interface is brought up */
|
|
lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_STOP, 1);
|
|
|
|
if (priv->mesh_tlv) {
|
|
sprintf(priv->mesh_ssid, "mesh");
|
|
priv->mesh_ssid_len = 4;
|
|
ret = 1;
|
|
}
|
|
|
|
lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
void lbs_start_mesh(struct lbs_private *priv)
|
|
{
|
|
lbs_add_mesh(priv);
|
|
|
|
if (device_create_file(&priv->dev->dev, &dev_attr_lbs_mesh))
|
|
netdev_err(priv->dev, "cannot register lbs_mesh attribute\n");
|
|
}
|
|
|
|
int lbs_deinit_mesh(struct lbs_private *priv)
|
|
{
|
|
struct net_device *dev = priv->dev;
|
|
int ret = 0;
|
|
|
|
lbs_deb_enter(LBS_DEB_MESH);
|
|
|
|
if (priv->mesh_tlv) {
|
|
device_remove_file(&dev->dev, &dev_attr_lbs_mesh);
|
|
ret = 1;
|
|
}
|
|
|
|
lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
|
|
/**
|
|
* lbs_mesh_stop - close the mshX interface
|
|
*
|
|
* @dev: A pointer to &net_device structure
|
|
* returns: 0
|
|
*/
|
|
static int lbs_mesh_stop(struct net_device *dev)
|
|
{
|
|
struct lbs_private *priv = dev->ml_priv;
|
|
|
|
lbs_deb_enter(LBS_DEB_MESH);
|
|
lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_STOP,
|
|
lbs_mesh_get_channel(priv));
|
|
|
|
spin_lock_irq(&priv->driver_lock);
|
|
|
|
netif_stop_queue(dev);
|
|
netif_carrier_off(dev);
|
|
|
|
spin_unlock_irq(&priv->driver_lock);
|
|
|
|
lbs_update_mcast(priv);
|
|
if (!lbs_iface_active(priv))
|
|
lbs_stop_iface(priv);
|
|
|
|
lbs_deb_leave(LBS_DEB_MESH);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* lbs_mesh_dev_open - open the mshX interface
|
|
*
|
|
* @dev: A pointer to &net_device structure
|
|
* returns: 0 or -EBUSY if monitor mode active
|
|
*/
|
|
static int lbs_mesh_dev_open(struct net_device *dev)
|
|
{
|
|
struct lbs_private *priv = dev->ml_priv;
|
|
int ret = 0;
|
|
|
|
lbs_deb_enter(LBS_DEB_NET);
|
|
if (!priv->iface_running) {
|
|
ret = lbs_start_iface(priv);
|
|
if (ret)
|
|
goto out;
|
|
}
|
|
|
|
spin_lock_irq(&priv->driver_lock);
|
|
|
|
if (priv->wdev->iftype == NL80211_IFTYPE_MONITOR) {
|
|
ret = -EBUSY;
|
|
spin_unlock_irq(&priv->driver_lock);
|
|
goto out;
|
|
}
|
|
|
|
netif_carrier_on(dev);
|
|
|
|
if (!priv->tx_pending_len)
|
|
netif_wake_queue(dev);
|
|
|
|
spin_unlock_irq(&priv->driver_lock);
|
|
|
|
ret = lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
|
|
lbs_mesh_get_channel(priv));
|
|
|
|
out:
|
|
lbs_deb_leave_args(LBS_DEB_NET, "ret %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
static const struct net_device_ops mesh_netdev_ops = {
|
|
.ndo_open = lbs_mesh_dev_open,
|
|
.ndo_stop = lbs_mesh_stop,
|
|
.ndo_start_xmit = lbs_hard_start_xmit,
|
|
.ndo_set_mac_address = lbs_set_mac_address,
|
|
.ndo_set_multicast_list = lbs_set_multicast_list,
|
|
};
|
|
|
|
/**
|
|
* lbs_add_mesh - add mshX interface
|
|
*
|
|
* @priv: A pointer to the &struct lbs_private structure
|
|
* returns: 0 if successful, -X otherwise
|
|
*/
|
|
static int lbs_add_mesh(struct lbs_private *priv)
|
|
{
|
|
struct net_device *mesh_dev = NULL;
|
|
struct wireless_dev *mesh_wdev;
|
|
int ret = 0;
|
|
|
|
lbs_deb_enter(LBS_DEB_MESH);
|
|
|
|
/* Allocate a virtual mesh device */
|
|
mesh_wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
|
|
if (!mesh_wdev) {
|
|
lbs_deb_mesh("init mshX wireless device failed\n");
|
|
ret = -ENOMEM;
|
|
goto done;
|
|
}
|
|
|
|
mesh_dev = alloc_netdev(0, "msh%d", ether_setup);
|
|
if (!mesh_dev) {
|
|
lbs_deb_mesh("init mshX device failed\n");
|
|
ret = -ENOMEM;
|
|
goto err_free_wdev;
|
|
}
|
|
|
|
mesh_wdev->iftype = NL80211_IFTYPE_MESH_POINT;
|
|
mesh_wdev->wiphy = priv->wdev->wiphy;
|
|
mesh_wdev->netdev = mesh_dev;
|
|
|
|
mesh_dev->ml_priv = priv;
|
|
mesh_dev->ieee80211_ptr = mesh_wdev;
|
|
priv->mesh_dev = mesh_dev;
|
|
|
|
mesh_dev->netdev_ops = &mesh_netdev_ops;
|
|
mesh_dev->ethtool_ops = &lbs_ethtool_ops;
|
|
memcpy(mesh_dev->dev_addr, priv->dev->dev_addr, ETH_ALEN);
|
|
|
|
SET_NETDEV_DEV(priv->mesh_dev, priv->dev->dev.parent);
|
|
|
|
mesh_dev->flags |= IFF_BROADCAST | IFF_MULTICAST;
|
|
/* Register virtual mesh interface */
|
|
ret = register_netdev(mesh_dev);
|
|
if (ret) {
|
|
pr_err("cannot register mshX virtual interface\n");
|
|
goto err_free_netdev;
|
|
}
|
|
|
|
ret = sysfs_create_group(&(mesh_dev->dev.kobj), &lbs_mesh_attr_group);
|
|
if (ret)
|
|
goto err_unregister;
|
|
|
|
lbs_persist_config_init(mesh_dev);
|
|
|
|
/* Everything successful */
|
|
ret = 0;
|
|
goto done;
|
|
|
|
err_unregister:
|
|
unregister_netdev(mesh_dev);
|
|
|
|
err_free_netdev:
|
|
free_netdev(mesh_dev);
|
|
|
|
err_free_wdev:
|
|
kfree(mesh_wdev);
|
|
|
|
done:
|
|
lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
void lbs_remove_mesh(struct lbs_private *priv)
|
|
{
|
|
struct net_device *mesh_dev;
|
|
|
|
mesh_dev = priv->mesh_dev;
|
|
if (!mesh_dev)
|
|
return;
|
|
|
|
lbs_deb_enter(LBS_DEB_MESH);
|
|
netif_stop_queue(mesh_dev);
|
|
netif_carrier_off(mesh_dev);
|
|
sysfs_remove_group(&(mesh_dev->dev.kobj), &lbs_mesh_attr_group);
|
|
lbs_persist_config_remove(mesh_dev);
|
|
unregister_netdev(mesh_dev);
|
|
priv->mesh_dev = NULL;
|
|
kfree(mesh_dev->ieee80211_ptr);
|
|
free_netdev(mesh_dev);
|
|
lbs_deb_leave(LBS_DEB_MESH);
|
|
}
|
|
|
|
|
|
/***************************************************************************
|
|
* Sending and receiving
|
|
*/
|
|
struct net_device *lbs_mesh_set_dev(struct lbs_private *priv,
|
|
struct net_device *dev, struct rxpd *rxpd)
|
|
{
|
|
if (priv->mesh_dev) {
|
|
if (priv->mesh_tlv == TLV_TYPE_OLD_MESH_ID) {
|
|
if (rxpd->rx_control & RxPD_MESH_FRAME)
|
|
dev = priv->mesh_dev;
|
|
} else if (priv->mesh_tlv == TLV_TYPE_MESH_ID) {
|
|
if (rxpd->u.bss.bss_num == MESH_IFACE_ID)
|
|
dev = priv->mesh_dev;
|
|
}
|
|
}
|
|
return dev;
|
|
}
|
|
|
|
|
|
void lbs_mesh_set_txpd(struct lbs_private *priv,
|
|
struct net_device *dev, struct txpd *txpd)
|
|
{
|
|
if (dev == priv->mesh_dev) {
|
|
if (priv->mesh_tlv == TLV_TYPE_OLD_MESH_ID)
|
|
txpd->tx_control |= cpu_to_le32(TxPD_MESH_FRAME);
|
|
else if (priv->mesh_tlv == TLV_TYPE_MESH_ID)
|
|
txpd->u.bss.bss_num = MESH_IFACE_ID;
|
|
}
|
|
}
|
|
|
|
|
|
/***************************************************************************
|
|
* Ethtool related
|
|
*/
|
|
|
|
static const char * const mesh_stat_strings[] = {
|
|
"drop_duplicate_bcast",
|
|
"drop_ttl_zero",
|
|
"drop_no_fwd_route",
|
|
"drop_no_buffers",
|
|
"fwded_unicast_cnt",
|
|
"fwded_bcast_cnt",
|
|
"drop_blind_table",
|
|
"tx_failed_cnt"
|
|
};
|
|
|
|
void lbs_mesh_ethtool_get_stats(struct net_device *dev,
|
|
struct ethtool_stats *stats, uint64_t *data)
|
|
{
|
|
struct lbs_private *priv = dev->ml_priv;
|
|
struct cmd_ds_mesh_access mesh_access;
|
|
int ret;
|
|
|
|
lbs_deb_enter(LBS_DEB_ETHTOOL);
|
|
|
|
/* Get Mesh Statistics */
|
|
ret = lbs_mesh_access(priv, CMD_ACT_MESH_GET_STATS, &mesh_access);
|
|
|
|
if (ret) {
|
|
memset(data, 0, MESH_STATS_NUM*(sizeof(uint64_t)));
|
|
return;
|
|
}
|
|
|
|
priv->mstats.fwd_drop_rbt = le32_to_cpu(mesh_access.data[0]);
|
|
priv->mstats.fwd_drop_ttl = le32_to_cpu(mesh_access.data[1]);
|
|
priv->mstats.fwd_drop_noroute = le32_to_cpu(mesh_access.data[2]);
|
|
priv->mstats.fwd_drop_nobuf = le32_to_cpu(mesh_access.data[3]);
|
|
priv->mstats.fwd_unicast_cnt = le32_to_cpu(mesh_access.data[4]);
|
|
priv->mstats.fwd_bcast_cnt = le32_to_cpu(mesh_access.data[5]);
|
|
priv->mstats.drop_blind = le32_to_cpu(mesh_access.data[6]);
|
|
priv->mstats.tx_failed_cnt = le32_to_cpu(mesh_access.data[7]);
|
|
|
|
data[0] = priv->mstats.fwd_drop_rbt;
|
|
data[1] = priv->mstats.fwd_drop_ttl;
|
|
data[2] = priv->mstats.fwd_drop_noroute;
|
|
data[3] = priv->mstats.fwd_drop_nobuf;
|
|
data[4] = priv->mstats.fwd_unicast_cnt;
|
|
data[5] = priv->mstats.fwd_bcast_cnt;
|
|
data[6] = priv->mstats.drop_blind;
|
|
data[7] = priv->mstats.tx_failed_cnt;
|
|
|
|
lbs_deb_enter(LBS_DEB_ETHTOOL);
|
|
}
|
|
|
|
int lbs_mesh_ethtool_get_sset_count(struct net_device *dev, int sset)
|
|
{
|
|
struct lbs_private *priv = dev->ml_priv;
|
|
|
|
if (sset == ETH_SS_STATS && dev == priv->mesh_dev)
|
|
return MESH_STATS_NUM;
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
void lbs_mesh_ethtool_get_strings(struct net_device *dev,
|
|
uint32_t stringset, uint8_t *s)
|
|
{
|
|
int i;
|
|
|
|
lbs_deb_enter(LBS_DEB_ETHTOOL);
|
|
|
|
switch (stringset) {
|
|
case ETH_SS_STATS:
|
|
for (i = 0; i < MESH_STATS_NUM; i++) {
|
|
memcpy(s + i * ETH_GSTRING_LEN,
|
|
mesh_stat_strings[i],
|
|
ETH_GSTRING_LEN);
|
|
}
|
|
break;
|
|
}
|
|
lbs_deb_enter(LBS_DEB_ETHTOOL);
|
|
}
|