linux_dsm_epyc7002/drivers/misc/cxl/vphb.c
Frederic Barrat a430739009 cxl: Make vPHB device node match adapter's
On bare-metal, when a device is attached to the cxl card, lsvpd shows
a location code such as (with cxlflash):
     # lsvpd -l sg22
     ...
     *YL U78CB.001.WZS0073-P1-C33-B0-T0-L0
which makes it hard to easily identify the cxl adapter owning the
flash device, since in this example C33 refers to a P8 processor.

lsvpd looks in the parent devices until it finds a location code, so the
device node for the vPHB ends up being used.

By reusing the device node of the adapter for the vPHB, lsvpd shows:
     # lsvpd -l sg16
     ...
     *YL U78C9.001.WZS09XA-P1-C7-B1-T0-L3
where C7 is the PCI slot of the cxl adapter.

On powerVM, the vPHB was already using the adapter device node, so
there's no change there.

Tested by cxlflash on bare-metal and powerVM.

Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-16 23:11:30 +10:00

298 lines
6.5 KiB
C

/*
* Copyright 2014 IBM Corp.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/pci.h>
#include <misc/cxl.h>
#include "cxl.h"
static int cxl_dma_set_mask(struct pci_dev *pdev, u64 dma_mask)
{
if (dma_mask < DMA_BIT_MASK(64)) {
pr_info("%s only 64bit DMA supported on CXL", __func__);
return -EIO;
}
*(pdev->dev.dma_mask) = dma_mask;
return 0;
}
static int cxl_pci_probe_mode(struct pci_bus *bus)
{
return PCI_PROBE_NORMAL;
}
static int cxl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
{
return -ENODEV;
}
static void cxl_teardown_msi_irqs(struct pci_dev *pdev)
{
/*
* MSI should never be set but need still need to provide this call
* back.
*/
}
static bool cxl_pci_enable_device_hook(struct pci_dev *dev)
{
struct pci_controller *phb;
struct cxl_afu *afu;
struct cxl_context *ctx;
phb = pci_bus_to_host(dev->bus);
afu = (struct cxl_afu *)phb->private_data;
if (!cxl_ops->link_ok(afu->adapter, afu)) {
dev_warn(&dev->dev, "%s: Device link is down, refusing to enable AFU\n", __func__);
return false;
}
set_dma_ops(&dev->dev, &dma_direct_ops);
set_dma_offset(&dev->dev, PAGE_OFFSET);
/*
* Allocate a context to do cxl things too. If we eventually do real
* DMA ops, we'll need a default context to attach them to
*/
ctx = cxl_dev_context_init(dev);
if (!ctx)
return false;
dev->dev.archdata.cxl_ctx = ctx;
return (cxl_ops->afu_check_and_enable(afu) == 0);
}
static void cxl_pci_disable_device(struct pci_dev *dev)
{
struct cxl_context *ctx = cxl_get_context(dev);
if (ctx) {
if (ctx->status == STARTED) {
dev_err(&dev->dev, "Default context started\n");
return;
}
dev->dev.archdata.cxl_ctx = NULL;
cxl_release_context(ctx);
}
}
static resource_size_t cxl_pci_window_alignment(struct pci_bus *bus,
unsigned long type)
{
return 1;
}
static void cxl_pci_reset_secondary_bus(struct pci_dev *dev)
{
/* Should we do an AFU reset here ? */
}
static int cxl_pcie_cfg_record(u8 bus, u8 devfn)
{
return (bus << 8) + devfn;
}
static int cxl_pcie_config_info(struct pci_bus *bus, unsigned int devfn,
struct cxl_afu **_afu, int *_record)
{
struct pci_controller *phb;
struct cxl_afu *afu;
int record;
phb = pci_bus_to_host(bus);
if (phb == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
afu = (struct cxl_afu *)phb->private_data;
record = cxl_pcie_cfg_record(bus->number, devfn);
if (record > afu->crs_num)
return PCIBIOS_DEVICE_NOT_FOUND;
*_afu = afu;
*_record = record;
return 0;
}
static int cxl_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 *val)
{
int rc, record;
struct cxl_afu *afu;
u8 val8;
u16 val16;
u32 val32;
rc = cxl_pcie_config_info(bus, devfn, &afu, &record);
if (rc)
return rc;
switch (len) {
case 1:
rc = cxl_ops->afu_cr_read8(afu, record, offset, &val8);
*val = val8;
break;
case 2:
rc = cxl_ops->afu_cr_read16(afu, record, offset, &val16);
*val = val16;
break;
case 4:
rc = cxl_ops->afu_cr_read32(afu, record, offset, &val32);
*val = val32;
break;
default:
WARN_ON(1);
}
if (rc)
return PCIBIOS_DEVICE_NOT_FOUND;
return PCIBIOS_SUCCESSFUL;
}
static int cxl_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 val)
{
int rc, record;
struct cxl_afu *afu;
rc = cxl_pcie_config_info(bus, devfn, &afu, &record);
if (rc)
return rc;
switch (len) {
case 1:
rc = cxl_ops->afu_cr_write8(afu, record, offset, val & 0xff);
break;
case 2:
rc = cxl_ops->afu_cr_write16(afu, record, offset, val & 0xffff);
break;
case 4:
rc = cxl_ops->afu_cr_write32(afu, record, offset, val);
break;
default:
WARN_ON(1);
}
if (rc)
return PCIBIOS_SET_FAILED;
return PCIBIOS_SUCCESSFUL;
}
static struct pci_ops cxl_pcie_pci_ops =
{
.read = cxl_pcie_read_config,
.write = cxl_pcie_write_config,
};
static struct pci_controller_ops cxl_pci_controller_ops =
{
.probe_mode = cxl_pci_probe_mode,
.enable_device_hook = cxl_pci_enable_device_hook,
.disable_device = cxl_pci_disable_device,
.release_device = cxl_pci_disable_device,
.window_alignment = cxl_pci_window_alignment,
.reset_secondary_bus = cxl_pci_reset_secondary_bus,
.setup_msi_irqs = cxl_setup_msi_irqs,
.teardown_msi_irqs = cxl_teardown_msi_irqs,
.dma_set_mask = cxl_dma_set_mask,
};
int cxl_pci_vphb_add(struct cxl_afu *afu)
{
struct pci_controller *phb;
struct device_node *vphb_dn;
struct device *parent;
/* The parent device is the adapter. Reuse the device node of
* the adapter.
* We don't seem to care what device node is used for the vPHB,
* but tools such as lsvpd walk up the device parents looking
* for a valid location code, so we might as well show devices
* attached to the adapter as being located on that adapter.
*/
parent = afu->adapter->dev.parent;
vphb_dn = parent->of_node;
/* Alloc and setup PHB data structure */
phb = pcibios_alloc_controller(vphb_dn);
if (!phb)
return -ENODEV;
/* Setup parent in sysfs */
phb->parent = parent;
/* Setup the PHB using arch provided callback */
phb->ops = &cxl_pcie_pci_ops;
phb->cfg_addr = NULL;
phb->cfg_data = 0;
phb->private_data = afu;
phb->controller_ops = cxl_pci_controller_ops;
/* Scan the bus */
pcibios_scan_phb(phb);
if (phb->bus == NULL)
return -ENXIO;
/* Claim resources. This might need some rework as well depending
* whether we are doing probe-only or not, like assigning unassigned
* resources etc...
*/
pcibios_claim_one_bus(phb->bus);
/* Add probed PCI devices to the device model */
pci_bus_add_devices(phb->bus);
afu->phb = phb;
return 0;
}
void cxl_pci_vphb_remove(struct cxl_afu *afu)
{
struct pci_controller *phb;
/* If there is no configuration record we won't have one of these */
if (!afu || !afu->phb)
return;
phb = afu->phb;
afu->phb = NULL;
pci_remove_root_bus(phb->bus);
pcibios_free_controller(phb);
}
bool cxl_pci_is_vphb_device(struct pci_dev *dev)
{
struct pci_controller *phb;
phb = pci_bus_to_host(dev->bus);
return (phb->ops == &cxl_pcie_pci_ops);
}
struct cxl_afu *cxl_pci_to_afu(struct pci_dev *dev)
{
struct pci_controller *phb;
phb = pci_bus_to_host(dev->bus);
return (struct cxl_afu *)phb->private_data;
}
EXPORT_SYMBOL_GPL(cxl_pci_to_afu);
unsigned int cxl_pci_to_cfg_record(struct pci_dev *dev)
{
return cxl_pcie_cfg_record(dev->bus->number, dev->devfn);
}
EXPORT_SYMBOL_GPL(cxl_pci_to_cfg_record);