mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-18 14:57:11 +07:00
476878e4b2
QEMU running in a stubdom needs to be able to set INTX_DISABLE, and the MSI(-X) enable flags in the PCI config space. This adds an attribute 'allow_interrupt_control' which when set for a PCI device allows writes to this flag(s). The toolstack will need to set this for stubdoms. When enabled, guest (stubdomain) will be allowed to set relevant enable flags, but only one at a time - i.e. it refuses to enable more than one of INTx, MSI, MSI-X at a time. This functionality is needed only for config space access done by device model (stubdomain) serving a HVM with the actual PCI device. It is not necessary and unsafe to enable direct access to those bits for PV domain with the device attached. For PV domains, there are separate protocol messages (XEN_PCI_OP_{enable,disable}_{msi,msix}) for this purpose. Those ops in addition to setting enable bits, also configure MSI(-X) in dom0 kernel - which is undesirable for PCI passthrough to HVM guests. This should not introduce any new security issues since a malicious guest (or stubdom) can already generate MSIs through other ways, see [1] page 8. Additionally, when qemu runs in dom0, it already have direct access to those bits. This is the second iteration of this feature. First was proposed as a direct Xen interface through a new hypercall, but ultimately it was rejected by the maintainer, because of mixing pciback and hypercalls for PCI config space access isn't a good design. Full discussion at [2]. [1]: https://invisiblethingslab.com/resources/2011/Software%20Attacks%20on%20Intel%20VT-d.pdf [2]: https://xen.markmail.org/thread/smpgpws4umdzizze [part of the commit message and sysfs handling] Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com> [the rest] Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> [boris: A few small changes suggested by Roger, some formatting changes] Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
297 lines
6.8 KiB
C
297 lines
6.8 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* PCI Backend - Handles the virtual fields found on the capability lists
|
|
* in the configuration space.
|
|
*
|
|
* Author: Ryan Wilson <hap9@epoch.ncsc.mil>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include "pciback.h"
|
|
#include "conf_space.h"
|
|
|
|
static LIST_HEAD(capabilities);
|
|
struct xen_pcibk_config_capability {
|
|
struct list_head cap_list;
|
|
|
|
int capability;
|
|
|
|
/* If the device has the capability found above, add these fields */
|
|
const struct config_field *fields;
|
|
};
|
|
|
|
static const struct config_field caplist_header[] = {
|
|
{
|
|
.offset = PCI_CAP_LIST_ID,
|
|
.size = 2, /* encompass PCI_CAP_LIST_ID & PCI_CAP_LIST_NEXT */
|
|
.u.w.read = xen_pcibk_read_config_word,
|
|
.u.w.write = NULL,
|
|
},
|
|
{}
|
|
};
|
|
|
|
static inline void register_capability(struct xen_pcibk_config_capability *cap)
|
|
{
|
|
list_add_tail(&cap->cap_list, &capabilities);
|
|
}
|
|
|
|
int xen_pcibk_config_capability_add_fields(struct pci_dev *dev)
|
|
{
|
|
int err = 0;
|
|
struct xen_pcibk_config_capability *cap;
|
|
int cap_offset;
|
|
|
|
list_for_each_entry(cap, &capabilities, cap_list) {
|
|
cap_offset = pci_find_capability(dev, cap->capability);
|
|
if (cap_offset) {
|
|
dev_dbg(&dev->dev, "Found capability 0x%x at 0x%x\n",
|
|
cap->capability, cap_offset);
|
|
|
|
err = xen_pcibk_config_add_fields_offset(dev,
|
|
caplist_header,
|
|
cap_offset);
|
|
if (err)
|
|
goto out;
|
|
err = xen_pcibk_config_add_fields_offset(dev,
|
|
cap->fields,
|
|
cap_offset);
|
|
if (err)
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static int vpd_address_write(struct pci_dev *dev, int offset, u16 value,
|
|
void *data)
|
|
{
|
|
/* Disallow writes to the vital product data */
|
|
if (value & PCI_VPD_ADDR_F)
|
|
return PCIBIOS_SET_FAILED;
|
|
else
|
|
return pci_write_config_word(dev, offset, value);
|
|
}
|
|
|
|
static const struct config_field caplist_vpd[] = {
|
|
{
|
|
.offset = PCI_VPD_ADDR,
|
|
.size = 2,
|
|
.u.w.read = xen_pcibk_read_config_word,
|
|
.u.w.write = vpd_address_write,
|
|
},
|
|
{
|
|
.offset = PCI_VPD_DATA,
|
|
.size = 4,
|
|
.u.dw.read = xen_pcibk_read_config_dword,
|
|
.u.dw.write = NULL,
|
|
},
|
|
{}
|
|
};
|
|
|
|
static int pm_caps_read(struct pci_dev *dev, int offset, u16 *value,
|
|
void *data)
|
|
{
|
|
int err;
|
|
u16 real_value;
|
|
|
|
err = pci_read_config_word(dev, offset, &real_value);
|
|
if (err)
|
|
goto out;
|
|
|
|
*value = real_value & ~PCI_PM_CAP_PME_MASK;
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
/* PM_OK_BITS specifies the bits that the driver domain is allowed to change.
|
|
* Can't allow driver domain to enable PMEs - they're shared */
|
|
#define PM_OK_BITS (PCI_PM_CTRL_PME_STATUS|PCI_PM_CTRL_DATA_SEL_MASK)
|
|
|
|
static int pm_ctrl_write(struct pci_dev *dev, int offset, u16 new_value,
|
|
void *data)
|
|
{
|
|
int err;
|
|
u16 old_value;
|
|
pci_power_t new_state;
|
|
|
|
err = pci_read_config_word(dev, offset, &old_value);
|
|
if (err)
|
|
goto out;
|
|
|
|
new_state = (pci_power_t)(new_value & PCI_PM_CTRL_STATE_MASK);
|
|
|
|
new_value &= PM_OK_BITS;
|
|
if ((old_value & PM_OK_BITS) != new_value) {
|
|
new_value = (old_value & ~PM_OK_BITS) | new_value;
|
|
err = pci_write_config_word(dev, offset, new_value);
|
|
if (err)
|
|
goto out;
|
|
}
|
|
|
|
/* Let pci core handle the power management change */
|
|
dev_dbg(&dev->dev, "set power state to %x\n", new_state);
|
|
err = pci_set_power_state(dev, new_state);
|
|
if (err) {
|
|
err = PCIBIOS_SET_FAILED;
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
/* Ensure PMEs are disabled */
|
|
static void *pm_ctrl_init(struct pci_dev *dev, int offset)
|
|
{
|
|
int err;
|
|
u16 value;
|
|
|
|
err = pci_read_config_word(dev, offset, &value);
|
|
if (err)
|
|
goto out;
|
|
|
|
if (value & PCI_PM_CTRL_PME_ENABLE) {
|
|
value &= ~PCI_PM_CTRL_PME_ENABLE;
|
|
err = pci_write_config_word(dev, offset, value);
|
|
}
|
|
|
|
out:
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
static const struct config_field caplist_pm[] = {
|
|
{
|
|
.offset = PCI_PM_PMC,
|
|
.size = 2,
|
|
.u.w.read = pm_caps_read,
|
|
},
|
|
{
|
|
.offset = PCI_PM_CTRL,
|
|
.size = 2,
|
|
.init = pm_ctrl_init,
|
|
.u.w.read = xen_pcibk_read_config_word,
|
|
.u.w.write = pm_ctrl_write,
|
|
},
|
|
{
|
|
.offset = PCI_PM_PPB_EXTENSIONS,
|
|
.size = 1,
|
|
.u.b.read = xen_pcibk_read_config_byte,
|
|
},
|
|
{
|
|
.offset = PCI_PM_DATA_REGISTER,
|
|
.size = 1,
|
|
.u.b.read = xen_pcibk_read_config_byte,
|
|
},
|
|
{}
|
|
};
|
|
|
|
static struct msi_msix_field_config {
|
|
u16 enable_bit; /* bit for enabling MSI/MSI-X */
|
|
unsigned int int_type; /* interrupt type for exclusiveness check */
|
|
} msi_field_config = {
|
|
.enable_bit = PCI_MSI_FLAGS_ENABLE,
|
|
.int_type = INTERRUPT_TYPE_MSI,
|
|
}, msix_field_config = {
|
|
.enable_bit = PCI_MSIX_FLAGS_ENABLE,
|
|
.int_type = INTERRUPT_TYPE_MSIX,
|
|
};
|
|
|
|
static void *msi_field_init(struct pci_dev *dev, int offset)
|
|
{
|
|
return &msi_field_config;
|
|
}
|
|
|
|
static void *msix_field_init(struct pci_dev *dev, int offset)
|
|
{
|
|
return &msix_field_config;
|
|
}
|
|
|
|
static int msi_msix_flags_write(struct pci_dev *dev, int offset, u16 new_value,
|
|
void *data)
|
|
{
|
|
int err;
|
|
u16 old_value;
|
|
const struct msi_msix_field_config *field_config = data;
|
|
const struct xen_pcibk_dev_data *dev_data = pci_get_drvdata(dev);
|
|
|
|
if (xen_pcibk_permissive || dev_data->permissive)
|
|
goto write;
|
|
|
|
err = pci_read_config_word(dev, offset, &old_value);
|
|
if (err)
|
|
return err;
|
|
|
|
if (new_value == old_value)
|
|
return 0;
|
|
|
|
if (!dev_data->allow_interrupt_control ||
|
|
(new_value ^ old_value) & ~field_config->enable_bit)
|
|
return PCIBIOS_SET_FAILED;
|
|
|
|
if (new_value & field_config->enable_bit) {
|
|
/* don't allow enabling together with other interrupt types */
|
|
int int_type = xen_pcibk_get_interrupt_type(dev);
|
|
|
|
if (int_type == INTERRUPT_TYPE_NONE ||
|
|
int_type == field_config->int_type)
|
|
goto write;
|
|
return PCIBIOS_SET_FAILED;
|
|
}
|
|
|
|
write:
|
|
return pci_write_config_word(dev, offset, new_value);
|
|
}
|
|
|
|
static const struct config_field caplist_msix[] = {
|
|
{
|
|
.offset = PCI_MSIX_FLAGS,
|
|
.size = 2,
|
|
.init = msix_field_init,
|
|
.u.w.read = xen_pcibk_read_config_word,
|
|
.u.w.write = msi_msix_flags_write,
|
|
},
|
|
{}
|
|
};
|
|
|
|
static const struct config_field caplist_msi[] = {
|
|
{
|
|
.offset = PCI_MSI_FLAGS,
|
|
.size = 2,
|
|
.init = msi_field_init,
|
|
.u.w.read = xen_pcibk_read_config_word,
|
|
.u.w.write = msi_msix_flags_write,
|
|
},
|
|
{}
|
|
};
|
|
|
|
static struct xen_pcibk_config_capability xen_pcibk_config_capability_pm = {
|
|
.capability = PCI_CAP_ID_PM,
|
|
.fields = caplist_pm,
|
|
};
|
|
static struct xen_pcibk_config_capability xen_pcibk_config_capability_vpd = {
|
|
.capability = PCI_CAP_ID_VPD,
|
|
.fields = caplist_vpd,
|
|
};
|
|
static struct xen_pcibk_config_capability xen_pcibk_config_capability_msi = {
|
|
.capability = PCI_CAP_ID_MSI,
|
|
.fields = caplist_msi,
|
|
};
|
|
static struct xen_pcibk_config_capability xen_pcibk_config_capability_msix = {
|
|
.capability = PCI_CAP_ID_MSIX,
|
|
.fields = caplist_msix,
|
|
};
|
|
|
|
int xen_pcibk_config_capability_init(void)
|
|
{
|
|
register_capability(&xen_pcibk_config_capability_vpd);
|
|
register_capability(&xen_pcibk_config_capability_pm);
|
|
register_capability(&xen_pcibk_config_capability_msi);
|
|
register_capability(&xen_pcibk_config_capability_msix);
|
|
|
|
return 0;
|
|
}
|