AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-26 05:25:11 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
246902bdf5
linux_dsm_epyc7002/drivers/net/wireless/admtek/adm8211.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

604 lines
18 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef ADM8211_H
#define ADM8211_H
/* ADM8211 Registers */
/* CR32 (SIG) signature */
#define ADM8211_SIG1 0x82011317 /* ADM8211A */
#define ADM8211_SIG2 0x82111317 /* ADM8211B/ADM8211C */
#define ADM8211_CSR_READ(r) ioread32(&priv->map->r)
#define ADM8211_CSR_WRITE(r, val) iowrite32((val), &priv->map->r)
/* CSR (Host Control and Status Registers) */
struct adm8211_csr {
__le32 PAR; /* 0x00 CSR0 */
__le32 FRCTL; /* 0x04 CSR0A */
__le32 TDR; /* 0x08 CSR1 */
__le32 WTDP; /* 0x0C CSR1A */
__le32 RDR; /* 0x10 CSR2 */
__le32 WRDP; /* 0x14 CSR2A */
__le32 RDB; /* 0x18 CSR3 */
__le32 TDBH; /* 0x1C CSR3A */
__le32 TDBD; /* 0x20 CSR4 */
__le32 TDBP; /* 0x24 CSR4A */
__le32 STSR; /* 0x28 CSR5 */
__le32 TDBB; /* 0x2C CSR5A */
__le32 NAR; /* 0x30 CSR6 */
__le32 CSR6A; /* reserved */
__le32 IER; /* 0x38 CSR7 */
__le32 TKIPSCEP; /* 0x3C CSR7A */
__le32 LPC; /* 0x40 CSR8 */
__le32 CSR_TEST1; /* 0x44 CSR8A */
__le32 SPR; /* 0x48 CSR9 */
__le32 CSR_TEST0; /* 0x4C CSR9A */
__le32 WCSR; /* 0x50 CSR10 */
__le32 WPDR; /* 0x54 CSR10A */
__le32 GPTMR; /* 0x58 CSR11 */
__le32 GPIO; /* 0x5C CSR11A */
__le32 BBPCTL; /* 0x60 CSR12 */
__le32 SYNCTL; /* 0x64 CSR12A */
__le32 PLCPHD; /* 0x68 CSR13 */
__le32 MMIWA; /* 0x6C CSR13A */
__le32 MMIRD0; /* 0x70 CSR14 */
__le32 MMIRD1; /* 0x74 CSR14A */
__le32 TXBR; /* 0x78 CSR15 */
__le32 SYNDATA; /* 0x7C CSR15A */
__le32 ALCS; /* 0x80 CSR16 */
__le32 TOFS2; /* 0x84 CSR17 */
__le32 CMDR; /* 0x88 CSR18 */
__le32 PCIC; /* 0x8C CSR19 */
__le32 PMCSR; /* 0x90 CSR20 */
__le32 PAR0; /* 0x94 CSR21 */
__le32 PAR1; /* 0x98 CSR22 */
__le32 MAR0; /* 0x9C CSR23 */
__le32 MAR1; /* 0xA0 CSR24 */
__le32 ATIMDA0; /* 0xA4 CSR25 */
__le32 ABDA1; /* 0xA8 CSR26 */
__le32 BSSID0; /* 0xAC CSR27 */
__le32 TXLMT; /* 0xB0 CSR28 */
__le32 MIBCNT; /* 0xB4 CSR29 */
__le32 BCNT; /* 0xB8 CSR30 */
__le32 TSFTH; /* 0xBC CSR31 */
__le32 TSC; /* 0xC0 CSR32 */
__le32 SYNRF; /* 0xC4 CSR33 */
__le32 BPLI; /* 0xC8 CSR34 */
__le32 CAP0; /* 0xCC CSR35 */
__le32 CAP1; /* 0xD0 CSR36 */
__le32 RMD; /* 0xD4 CSR37 */
__le32 CFPP; /* 0xD8 CSR38 */
__le32 TOFS0; /* 0xDC CSR39 */
__le32 TOFS1; /* 0xE0 CSR40 */
__le32 IFST; /* 0xE4 CSR41 */
__le32 RSPT; /* 0xE8 CSR42 */
__le32 TSFTL; /* 0xEC CSR43 */
__le32 WEPCTL; /* 0xF0 CSR44 */
__le32 WESK; /* 0xF4 CSR45 */
__le32 WEPCNT; /* 0xF8 CSR46 */
__le32 MACTEST; /* 0xFC CSR47 */
__le32 FER; /* 0x100 */
__le32 FEMR; /* 0x104 */
__le32 FPSR; /* 0x108 */
__le32 FFER; /* 0x10C */
} __packed;
/* CSR0 - PAR (PCI Address Register) */
#define ADM8211_PAR_MWIE (1 << 24)
#define ADM8211_PAR_MRLE (1 << 23)
#define ADM8211_PAR_MRME (1 << 21)
#define ADM8211_PAR_RAP ((1 << 18) | (1 << 17))
#define ADM8211_PAR_CAL ((1 << 15) | (1 << 14))
#define ADM8211_PAR_PBL 0x00003f00
#define ADM8211_PAR_BLE (1 << 7)
#define ADM8211_PAR_DSL 0x0000007c
#define ADM8211_PAR_BAR (1 << 1)
#define ADM8211_PAR_SWR (1 << 0)
/* CSR1 - FRCTL (Frame Control Register) */
#define ADM8211_FRCTL_PWRMGT (1 << 31)
#define ADM8211_FRCTL_MAXPSP (1 << 27)
#define ADM8211_FRCTL_DRVPRSP (1 << 26)
#define ADM8211_FRCTL_DRVBCON (1 << 25)
#define ADM8211_FRCTL_AID 0x0000ffff
#define ADM8211_FRCTL_AID_ON 0x0000c000
/* CSR5 - STSR (Status Register) */
#define ADM8211_STSR_PCF (1 << 31)
#define ADM8211_STSR_BCNTC (1 << 30)
#define ADM8211_STSR_GPINT (1 << 29)
#define ADM8211_STSR_LinkOff (1 << 28)
#define ADM8211_STSR_ATIMTC (1 << 27)
#define ADM8211_STSR_TSFTF (1 << 26)
#define ADM8211_STSR_TSCZ (1 << 25)
#define ADM8211_STSR_LinkOn (1 << 24)
#define ADM8211_STSR_SQL (1 << 23)
#define ADM8211_STSR_WEPTD (1 << 22)
#define ADM8211_STSR_ATIME (1 << 21)
#define ADM8211_STSR_TBTT (1 << 20)
#define ADM8211_STSR_NISS (1 << 16)
#define ADM8211_STSR_AISS (1 << 15)
#define ADM8211_STSR_TEIS (1 << 14)
#define ADM8211_STSR_FBE (1 << 13)
#define ADM8211_STSR_REIS (1 << 12)
#define ADM8211_STSR_GPTT (1 << 11)
#define ADM8211_STSR_RPS (1 << 8)
#define ADM8211_STSR_RDU (1 << 7)
#define ADM8211_STSR_RCI (1 << 6)
#define ADM8211_STSR_TUF (1 << 5)
#define ADM8211_STSR_TRT (1 << 4)
#define ADM8211_STSR_TLT (1 << 3)
#define ADM8211_STSR_TDU (1 << 2)
#define ADM8211_STSR_TPS (1 << 1)
#define ADM8211_STSR_TCI (1 << 0)
/* CSR6 - NAR (Network Access Register) */
#define ADM8211_NAR_TXCF (1 << 31)
#define ADM8211_NAR_HF (1 << 30)
#define ADM8211_NAR_UTR (1 << 29)
#define ADM8211_NAR_SQ (1 << 28)
#define ADM8211_NAR_CFP (1 << 27)
#define ADM8211_NAR_SF (1 << 21)
#define ADM8211_NAR_TR ((1 << 15) | (1 << 14))
#define ADM8211_NAR_ST (1 << 13)
#define ADM8211_NAR_OM ((1 << 11) | (1 << 10))
#define ADM8211_NAR_MM (1 << 7)
#define ADM8211_NAR_PR (1 << 6)
#define ADM8211_NAR_EA (1 << 5)
#define ADM8211_NAR_PB (1 << 3)
#define ADM8211_NAR_STPDMA (1 << 2)
#define ADM8211_NAR_SR (1 << 1)
#define ADM8211_NAR_CTX (1 << 0)
#define ADM8211_IDLE() \
do { \
if (priv->nar & (ADM8211_NAR_SR | ADM8211_NAR_ST)) { \
ADM8211_CSR_WRITE(NAR, priv->nar & \
~(ADM8211_NAR_SR | ADM8211_NAR_ST));\
ADM8211_CSR_READ(NAR); \
msleep(20); \
} \
} while (0)
#define ADM8211_IDLE_RX() \
do { \
if (priv->nar & ADM8211_NAR_SR) { \
ADM8211_CSR_WRITE(NAR, priv->nar & ~ADM8211_NAR_SR); \
ADM8211_CSR_READ(NAR); \
mdelay(20); \
} \
} while (0)
#define ADM8211_RESTORE() \
do { \
if (priv->nar & (ADM8211_NAR_SR | ADM8211_NAR_ST)) \
ADM8211_CSR_WRITE(NAR, priv->nar); \
} while (0)
/* CSR7 - IER (Interrupt Enable Register) */
#define ADM8211_IER_PCFIE (1 << 31)
#define ADM8211_IER_BCNTCIE (1 << 30)
#define ADM8211_IER_GPIE (1 << 29)
#define ADM8211_IER_LinkOffIE (1 << 28)
#define ADM8211_IER_ATIMTCIE (1 << 27)
#define ADM8211_IER_TSFTFIE (1 << 26)
#define ADM8211_IER_TSCZE (1 << 25)
#define ADM8211_IER_LinkOnIE (1 << 24)
#define ADM8211_IER_SQLIE (1 << 23)
#define ADM8211_IER_WEPIE (1 << 22)
#define ADM8211_IER_ATIMEIE (1 << 21)
#define ADM8211_IER_TBTTIE (1 << 20)
#define ADM8211_IER_NIE (1 << 16)
#define ADM8211_IER_AIE (1 << 15)
#define ADM8211_IER_TEIE (1 << 14)
#define ADM8211_IER_FBEIE (1 << 13)
#define ADM8211_IER_REIE (1 << 12)
#define ADM8211_IER_GPTIE (1 << 11)
#define ADM8211_IER_RSIE (1 << 8)
#define ADM8211_IER_RUIE (1 << 7)
#define ADM8211_IER_RCIE (1 << 6)
#define ADM8211_IER_TUIE (1 << 5)
#define ADM8211_IER_TRTIE (1 << 4)
#define ADM8211_IER_TLTTIE (1 << 3)
#define ADM8211_IER_TDUIE (1 << 2)
#define ADM8211_IER_TPSIE (1 << 1)
#define ADM8211_IER_TCIE (1 << 0)
/* CSR9 - SPR (Serial Port Register) */
#define ADM8211_SPR_SRS (1 << 11)
#define ADM8211_SPR_SDO (1 << 3)
#define ADM8211_SPR_SDI (1 << 2)
#define ADM8211_SPR_SCLK (1 << 1)
#define ADM8211_SPR_SCS (1 << 0)
/* CSR9A - CSR_TEST0 */
#define ADM8211_CSR_TEST0_EPNE (1 << 18)
#define ADM8211_CSR_TEST0_EPSNM (1 << 17)
#define ADM8211_CSR_TEST0_EPTYP (1 << 16)
#define ADM8211_CSR_TEST0_EPRLD (1 << 15)
/* CSR10 - WCSR (Wake-up Control/Status Register) */
#define ADM8211_WCSR_CRCT (1 << 30)
#define ADM8211_WCSR_TSFTWE (1 << 20)
#define ADM8211_WCSR_TIMWE (1 << 19)
#define ADM8211_WCSR_ATIMWE (1 << 18)
#define ADM8211_WCSR_KEYWE (1 << 17)
#define ADM8211_WCSR_MPRE (1 << 9)
#define ADM8211_WCSR_LSOE (1 << 8)
#define ADM8211_WCSR_KEYUP (1 << 6)
#define ADM8211_WCSR_TSFTW (1 << 5)
#define ADM8211_WCSR_TIMW (1 << 4)
#define ADM8211_WCSR_ATIMW (1 << 3)
#define ADM8211_WCSR_MPR (1 << 1)
#define ADM8211_WCSR_LSO (1 << 0)
/* CSR11A - GPIO */
#define ADM8211_CSR_GPIO_EN5 (1 << 17)
#define ADM8211_CSR_GPIO_EN4 (1 << 16)
#define ADM8211_CSR_GPIO_EN3 (1 << 15)
#define ADM8211_CSR_GPIO_EN2 (1 << 14)
#define ADM8211_CSR_GPIO_EN1 (1 << 13)
#define ADM8211_CSR_GPIO_EN0 (1 << 12)
#define ADM8211_CSR_GPIO_O5 (1 << 11)
#define ADM8211_CSR_GPIO_O4 (1 << 10)
#define ADM8211_CSR_GPIO_O3 (1 << 9)
#define ADM8211_CSR_GPIO_O2 (1 << 8)
#define ADM8211_CSR_GPIO_O1 (1 << 7)
#define ADM8211_CSR_GPIO_O0 (1 << 6)
#define ADM8211_CSR_GPIO_IN 0x0000003f
/* CSR12 - BBPCTL (BBP Control port) */
#define ADM8211_BBPCTL_MMISEL (1 << 31)
#define ADM8211_BBPCTL_SPICADD (0x7F << 24)
#define ADM8211_BBPCTL_RF3000 (0x20 << 24)
#define ADM8211_BBPCTL_TXCE (1 << 23)
#define ADM8211_BBPCTL_RXCE (1 << 22)
#define ADM8211_BBPCTL_CCAP (1 << 21)
#define ADM8211_BBPCTL_TYPE 0x001c0000
#define ADM8211_BBPCTL_WR (1 << 17)
#define ADM8211_BBPCTL_RD (1 << 16)
#define ADM8211_BBPCTL_ADDR 0x0000ff00
#define ADM8211_BBPCTL_DATA 0x000000ff
/* CSR12A - SYNCTL (Synthesizer Control port) */
#define ADM8211_SYNCTL_WR (1 << 31)
#define ADM8211_SYNCTL_RD (1 << 30)
#define ADM8211_SYNCTL_CS0 (1 << 29)
#define ADM8211_SYNCTL_CS1 (1 << 28)
#define ADM8211_SYNCTL_CAL (1 << 27)
#define ADM8211_SYNCTL_SELCAL (1 << 26)
#define ADM8211_SYNCTL_RFtype ((1 << 24) | (1 << 23) | (1 << 22))
#define ADM8211_SYNCTL_RFMD (1 << 22)
#define ADM8211_SYNCTL_GENERAL (0x7 << 22)
/* SYNCTL 21:0 Data (Si4126: 18-bit data, 4-bit address) */
/* CSR18 - CMDR (Command Register) */
#define ADM8211_CMDR_PM (1 << 19)
#define ADM8211_CMDR_APM (1 << 18)
#define ADM8211_CMDR_RTE (1 << 4)
#define ADM8211_CMDR_DRT ((1 << 3) | (1 << 2))
#define ADM8211_CMDR_DRT_8DW (0x0 << 2)
#define ADM8211_CMDR_DRT_16DW (0x1 << 2)
#define ADM8211_CMDR_DRT_SF (0x2 << 2)
/* CSR33 - SYNRF (SYNRF direct control) */
#define ADM8211_SYNRF_SELSYN (1 << 31)
#define ADM8211_SYNRF_SELRF (1 << 30)
#define ADM8211_SYNRF_LERF (1 << 29)
#define ADM8211_SYNRF_LEIF (1 << 28)
#define ADM8211_SYNRF_SYNCLK (1 << 27)
#define ADM8211_SYNRF_SYNDATA (1 << 26)
#define ADM8211_SYNRF_PE1 (1 << 25)
#define ADM8211_SYNRF_PE2 (1 << 24)
#define ADM8211_SYNRF_PA_PE (1 << 23)
#define ADM8211_SYNRF_TR_SW (1 << 22)
#define ADM8211_SYNRF_TR_SWN (1 << 21)
#define ADM8211_SYNRF_RADIO (1 << 20)
#define ADM8211_SYNRF_CAL_EN (1 << 19)
#define ADM8211_SYNRF_PHYRST (1 << 18)
#define ADM8211_SYNRF_IF_SELECT_0 (1 << 31)
#define ADM8211_SYNRF_IF_SELECT_1 ((1 << 31) | (1 << 28))
#define ADM8211_SYNRF_WRITE_SYNDATA_0 (1 << 31)
#define ADM8211_SYNRF_WRITE_SYNDATA_1 ((1 << 31) | (1 << 26))
#define ADM8211_SYNRF_WRITE_CLOCK_0 (1 << 31)
#define ADM8211_SYNRF_WRITE_CLOCK_1 ((1 << 31) | (1 << 27))
/* CSR44 - WEPCTL (WEP Control) */
#define ADM8211_WEPCTL_WEPENABLE (1 << 31)
#define ADM8211_WEPCTL_WPAENABLE (1 << 30)
#define ADM8211_WEPCTL_CURRENT_TABLE (1 << 29)
#define ADM8211_WEPCTL_TABLE_WR (1 << 28)
#define ADM8211_WEPCTL_TABLE_RD (1 << 27)
#define ADM8211_WEPCTL_WEPRXBYP (1 << 25)
#define ADM8211_WEPCTL_SEL_WEPTABLE (1 << 23)
#define ADM8211_WEPCTL_ADDR (0x000001ff)
/* CSR45 - WESK (Data Entry for Share/Individual Key) */
#define ADM8211_WESK_DATA (0x0000ffff)
/* FER (Function Event Register) */
#define ADM8211_FER_INTR_EV_ENT (1 << 15)
/* Si4126 RF Synthesizer - Control Registers */
#define SI4126_MAIN_CONF 0
#define SI4126_PHASE_DET_GAIN 1
#define SI4126_POWERDOWN 2
#define SI4126_RF1_N_DIV 3 /* only Si4136 */
#define SI4126_RF2_N_DIV 4
#define SI4126_IF_N_DIV 5
#define SI4126_RF1_R_DIV 6 /* only Si4136 */
#define SI4126_RF2_R_DIV 7
#define SI4126_IF_R_DIV 8
/* Main Configuration */
#define SI4126_MAIN_XINDIV2 (1 << 6)
#define SI4126_MAIN_IFDIV ((1 << 11) | (1 << 10))
/* Powerdown */
#define SI4126_POWERDOWN_PDIB (1 << 1)
#define SI4126_POWERDOWN_PDRB (1 << 0)
/* RF3000 BBP - Control Port Registers */
/* 0x00 - reserved */
#define RF3000_MODEM_CTRL__RX_STATUS 0x01
#define RF3000_CCA_CTRL 0x02
#define RF3000_DIVERSITY__RSSI 0x03
#define RF3000_RX_SIGNAL_FIELD 0x04
#define RF3000_RX_LEN_MSB 0x05
#define RF3000_RX_LEN_LSB 0x06
#define RF3000_RX_SERVICE_FIELD 0x07
#define RF3000_TX_VAR_GAIN__TX_LEN_EXT 0x11
#define RF3000_TX_LEN_MSB 0x12
#define RF3000_TX_LEN_LSB 0x13
#define RF3000_LOW_GAIN_CALIB 0x14
#define RF3000_HIGH_GAIN_CALIB 0x15
/* ADM8211 revisions */
#define ADM8211_REV_AB 0x11
#define ADM8211_REV_AF 0x15
#define ADM8211_REV_BA 0x20
#define ADM8211_REV_CA 0x30
struct adm8211_desc {
__le32 status;
__le32 length;
__le32 buffer1;
__le32 buffer2;
};
#define RDES0_STATUS_OWN (1 << 31)
#define RDES0_STATUS_ES (1 << 30)
#define RDES0_STATUS_SQL (1 << 29)
#define RDES0_STATUS_DE (1 << 28)
#define RDES0_STATUS_FS (1 << 27)
#define RDES0_STATUS_LS (1 << 26)
#define RDES0_STATUS_PCF (1 << 25)
#define RDES0_STATUS_SFDE (1 << 24)
#define RDES0_STATUS_SIGE (1 << 23)
#define RDES0_STATUS_CRC16E (1 << 22)
#define RDES0_STATUS_RXTOE (1 << 21)
#define RDES0_STATUS_CRC32E (1 << 20)
#define RDES0_STATUS_ICVE (1 << 19)
#define RDES0_STATUS_DA1 (1 << 17)
#define RDES0_STATUS_DA0 (1 << 16)
#define RDES0_STATUS_RXDR ((1 << 15) | (1 << 14) | (1 << 13) | (1 << 12))
#define RDES0_STATUS_FL (0x00000fff)
#define RDES1_CONTROL_RER (1 << 25)
#define RDES1_CONTROL_RCH (1 << 24)
#define RDES1_CONTROL_RBS2 (0x00fff000)
#define RDES1_CONTROL_RBS1 (0x00000fff)
#define RDES1_STATUS_RSSI (0x0000007f)
#define TDES0_CONTROL_OWN (1 << 31)
#define TDES0_CONTROL_DONE (1 << 30)
#define TDES0_CONTROL_TXDR (0x0ff00000)
#define TDES0_STATUS_OWN (1 << 31)
#define TDES0_STATUS_DONE (1 << 30)
#define TDES0_STATUS_ES (1 << 29)
#define TDES0_STATUS_TLT (1 << 28)
#define TDES0_STATUS_TRT (1 << 27)
#define TDES0_STATUS_TUF (1 << 26)
#define TDES0_STATUS_TRO (1 << 25)
#define TDES0_STATUS_SOFBR (1 << 24)
#define TDES0_STATUS_ACR (0x00000fff)
#define TDES1_CONTROL_IC (1 << 31)
#define TDES1_CONTROL_LS (1 << 30)
#define TDES1_CONTROL_FS (1 << 29)
#define TDES1_CONTROL_TER (1 << 25)
#define TDES1_CONTROL_TCH (1 << 24)
#define TDES1_CONTROL_RBS2 (0x00fff000)
#define TDES1_CONTROL_RBS1 (0x00000fff)
/* SRAM offsets */
#define ADM8211_SRAM(x) (priv->pdev->revision < ADM8211_REV_BA ? \
ADM8211_SRAM_A_ ## x : ADM8211_SRAM_B_ ## x)
#define ADM8211_SRAM_INDIV_KEY 0x0000
#define ADM8211_SRAM_A_SHARE_KEY 0x0160
#define ADM8211_SRAM_B_SHARE_KEY 0x00c0
#define ADM8211_SRAM_A_SSID 0x0180
#define ADM8211_SRAM_B_SSID 0x00d4
#define ADM8211_SRAM_SSID ADM8211_SRAM(SSID)
#define ADM8211_SRAM_A_SUPP_RATE 0x0191
#define ADM8211_SRAM_B_SUPP_RATE 0x00dd
#define ADM8211_SRAM_SUPP_RATE ADM8211_SRAM(SUPP_RATE)
#define ADM8211_SRAM_A_SIZE 0x0200
#define ADM8211_SRAM_B_SIZE 0x01c0
#define ADM8211_SRAM_SIZE ADM8211_SRAM(SIZE)
struct adm8211_rx_ring_info {
struct sk_buff *skb;
dma_addr_t mapping;
};
struct adm8211_tx_ring_info {
struct sk_buff *skb;
dma_addr_t mapping;
size_t hdrlen;
};
#define PLCP_SIGNAL_1M 0x0a
#define PLCP_SIGNAL_2M 0x14
#define PLCP_SIGNAL_5M5 0x37
#define PLCP_SIGNAL_11M 0x6e
struct adm8211_tx_hdr {
u8 da[6];
u8 signal; /* PLCP signal / TX rate in 100 Kbps */
u8 service;
__le16 frame_body_size;
__le16 frame_control;
__le16 plcp_frag_tail_len;
__le16 plcp_frag_head_len;
__le16 dur_frag_tail;
__le16 dur_frag_head;
u8 addr4[6];
#define ADM8211_TXHDRCTL_SHORT_PREAMBLE (1 << 0)
#define ADM8211_TXHDRCTL_MORE_FRAG (1 << 1)
#define ADM8211_TXHDRCTL_MORE_DATA (1 << 2)
#define ADM8211_TXHDRCTL_FRAG_NO (1 << 3) /* ? */
#define ADM8211_TXHDRCTL_ENABLE_RTS (1 << 4)
#define ADM8211_TXHDRCTL_ENABLE_WEP_ENGINE (1 << 5)
#define ADM8211_TXHDRCTL_ENABLE_EXTEND_HEADER (1 << 15) /* ? */
__le16 header_control;
__le16 frag;
u8 reserved_0;
u8 retry_limit;
u32 wep2key0;
u32 wep2key1;
u32 wep2key2;
u32 wep2key3;
u8 keyid;
u8 entry_control; // huh??
u16 reserved_1;
u32 reserved_2;
} __packed;
#define RX_COPY_BREAK 128
#define RX_PKT_SIZE 2500
struct adm8211_eeprom {
__le16 signature; /* 0x00 */
u8 major_version; /* 0x02 */
u8 minor_version; /* 0x03 */
u8 reserved_1[4]; /* 0x04 */
u8 hwaddr[6]; /* 0x08 */
u8 reserved_2[8]; /* 0x1E */
__le16 cr49; /* 0x16 */
u8 cr03; /* 0x18 */
u8 cr28; /* 0x19 */
u8 cr29; /* 0x1A */
u8 country_code; /* 0x1B */
/* specific bbp types */
#define ADM8211_BBP_RFMD3000 0x00
#define ADM8211_BBP_RFMD3002 0x01
#define ADM8211_BBP_ADM8011 0x04
u8 specific_bbptype; /* 0x1C */
u8 specific_rftype; /* 0x1D */
u8 reserved_3[2]; /* 0x1E */
__le16 device_id; /* 0x20 */
__le16 vendor_id; /* 0x22 */
__le16 subsystem_id; /* 0x24 */
__le16 subsystem_vendor_id; /* 0x26 */
u8 maxlat; /* 0x28 */
u8 mingnt; /* 0x29 */
__le16 cis_pointer_low; /* 0x2A */
__le16 cis_pointer_high; /* 0x2C */
__le16 csr18; /* 0x2E */
u8 reserved_4[16]; /* 0x30 */
u8 d1_pwrdara; /* 0x40 */
u8 d0_pwrdara; /* 0x41 */
u8 d3_pwrdara; /* 0x42 */
u8 d2_pwrdara; /* 0x43 */
u8 antenna_power[14]; /* 0x44 */
__le16 cis_wordcnt; /* 0x52 */
u8 tx_power[14]; /* 0x54 */
u8 lpf_cutoff[14]; /* 0x62 */
u8 lnags_threshold[14]; /* 0x70 */
__le16 checksum; /* 0x7E */
u8 cis_data[0]; /* 0x80, 384 bytes */
} __packed;
struct adm8211_priv {
struct pci_dev *pdev;
spinlock_t lock;
struct adm8211_csr __iomem *map;
struct adm8211_desc *rx_ring;
struct adm8211_desc *tx_ring;
dma_addr_t rx_ring_dma;
dma_addr_t tx_ring_dma;
struct adm8211_rx_ring_info *rx_buffers;
struct adm8211_tx_ring_info *tx_buffers;
unsigned int rx_ring_size, tx_ring_size;
unsigned int cur_tx, dirty_tx, cur_rx;
struct ieee80211_low_level_stats stats;
struct ieee80211_supported_band band;
struct ieee80211_channel channels[14];
int mode;
int channel;
u8 bssid[ETH_ALEN];
u8 soft_rx_crc;
u8 retry_limit;
u8 ant_power;
u8 tx_power;
u8 lpf_cutoff;
u8 lnags_threshold;
struct adm8211_eeprom *eeprom;
size_t eeprom_len;
u32 nar;
#define ADM8211_TYPE_INTERSIL 0x00
#define ADM8211_TYPE_RFMD 0x01
#define ADM8211_TYPE_MARVEL 0x02
#define ADM8211_TYPE_AIROHA 0x03
#define ADM8211_TYPE_ADMTEK 0x05
unsigned int rf_type:3;
unsigned int bbp_type:3;
u8 specific_bbptype;
enum {
ADM8211_RFMD2948 = 0x0,
ADM8211_RFMD2958 = 0x1,
ADM8211_RFMD2958_RF3000_CONTROL_POWER = 0x2,
ADM8211_MAX2820 = 0x8,
ADM8211_AL2210L = 0xC, /* Airoha */
} transceiver_type;
};
struct ieee80211_chan_range {
u8 min;
u8 max;
};
static const struct ieee80211_chan_range cranges[] = {
{1, 11}, /* FCC */
{1, 11}, /* IC */
{1, 13}, /* ETSI */
{10, 11}, /* SPAIN */
{10, 13}, /* FRANCE */
{14, 14}, /* MMK */
{1, 14}, /* MMK2 */
};
#endif /* ADM8211_H */
Reference in New Issue View Git Blame Copy Permalink