linux_dsm_epyc7002/arch/arm/boot/dts/rk3066a.dtsi
Heiko Stuebner d63dc0514d arm: add basic support for Rockchip RK3066a boards
This adds a generic devicetree board file and a dtsi for boards
based on the RK3066a SoCs from Rockchip.

Apart from the generic parts (gic, clocks, pinctrl) the only components
currently supported are the timers, uarts and mmc ports (all DesignWare-
based).

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Olof Johansson <olof@lixom.net>
2013-06-21 09:21:02 +02:00

391 lines
9.6 KiB
Plaintext

/*
* Copyright (c) 2013 MundoReader S.L.
* Author: Heiko Stuebner <heiko@sntech.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include "skeleton.dtsi"
#include "rk3066a-clocks.dtsi"
/ {
compatible = "rockchip,rk3066a";
interrupt-parent = <&gic>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <0x0>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <0x1>;
};
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges;
gic: interrupt-controller@1013d000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x1013d000 0x1000>,
<0x1013c100 0x0100>;
};
L2: l2-cache-controller@10138000 {
compatible = "arm,pl310-cache";
reg = <0x10138000 0x1000>;
cache-unified;
cache-level = <2>;
};
local-timer@1013c600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x1013c600 0x20>;
interrupts = <GIC_PPI 13 0x304>;
clocks = <&dummy150m>;
};
timer@20038000 {
compatible = "snps,dw-apb-timer-osc";
reg = <0x20038000 0x100>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_gates1 0>, <&clk_gates7 7>;
clock-names = "timer", "pclk";
};
timer@2003a000 {
compatible = "snps,dw-apb-timer-osc";
reg = <0x2003a000 0x100>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_gates1 1>, <&clk_gates7 8>;
clock-names = "timer", "pclk";
};
timer@2000e000 {
compatible = "snps,dw-apb-timer-osc";
reg = <0x2000e000 0x100>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_gates1 2>, <&clk_gates7 9>;
clock-names = "timer", "pclk";
};
pinctrl@20008000 {
compatible = "rockchip,rk3066a-pinctrl";
reg = <0x20008000 0x150>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
gpio0: gpio0@20034000 {
compatible = "rockchip,gpio-bank";
reg = <0x20034000 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_gates8 9>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio1: gpio1@2003c000 {
compatible = "rockchip,gpio-bank";
reg = <0x2003c000 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_gates8 10>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio2@2003e000 {
compatible = "rockchip,gpio-bank";
reg = <0x2003e000 0x100>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_gates8 11>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio3@20080000 {
compatible = "rockchip,gpio-bank";
reg = <0x20080000 0x100>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_gates8 12>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio4: gpio4@20084000 {
compatible = "rockchip,gpio-bank";
reg = <0x20084000 0x100>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_gates8 13>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio6: gpio6@2000a000 {
compatible = "rockchip,gpio-bank";
reg = <0x2000a000 0x100>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_gates8 15>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pcfg_pull_default: pcfg_pull_default {
bias-pull-pin-default;
};
pcfg_pull_none: pcfg_pull_none {
bias-disable;
};
uart0 {
uart0_xfer: uart0-xfer {
rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>;
rockchip,config = <&pcfg_pull_default>;
};
uart0_cts: uart0-cts {
rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>;
rockchip,config = <&pcfg_pull_default>;
};
uart0_rts: uart0-rts {
rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>;
rockchip,config = <&pcfg_pull_default>;
};
};
uart1 {
uart1_xfer: uart1-xfer {
rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>;
rockchip,config = <&pcfg_pull_default>;
};
uart1_cts: uart1-cts {
rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>;
rockchip,config = <&pcfg_pull_default>;
};
uart1_rts: uart1-rts {
rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>;
rockchip,config = <&pcfg_pull_default>;
};
};
uart2 {
uart2_xfer: uart2-xfer {
rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>;
rockchip,config = <&pcfg_pull_default>;
};
/* no rts / cts for uart2 */
};
uart3 {
uart3_xfer: uart3-xfer {
rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>;
rockchip,config = <&pcfg_pull_default>;
};
uart3_cts: uart3-cts {
rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>;
rockchip,config = <&pcfg_pull_default>;
};
uart3_rts: uart3-rts {
rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>;
rockchip,config = <&pcfg_pull_default>;
};
};
sd0 {
sd0_clk: sd0-clk {
rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>;
rockchip,config = <&pcfg_pull_default>;
};
sd0_cmd: sd0-cmd {
rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>;
rockchip,config = <&pcfg_pull_default>;
};
sd0_cd: sd0-cd {
rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>;
rockchip,config = <&pcfg_pull_default>;
};
sd0_wp: sd0-wp {
rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>;
rockchip,config = <&pcfg_pull_default>;
};
sd0_bus1: sd0-bus-width1 {
rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>;
rockchip,config = <&pcfg_pull_default>;
};
sd0_bus4: sd0-bus-width4 {
rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>;
rockchip,config = <&pcfg_pull_default>;
};
};
sd1 {
sd1_clk: sd1-clk {
rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>;
rockchip,config = <&pcfg_pull_default>;
};
sd1_cmd: sd1-cmd {
rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>;
rockchip,config = <&pcfg_pull_default>;
};
sd1_cd: sd1-cd {
rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>;
rockchip,config = <&pcfg_pull_default>;
};
sd1_wp: sd1-wp {
rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>;
rockchip,config = <&pcfg_pull_default>;
};
sd1_bus1: sd1-bus-width1 {
rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>;
rockchip,config = <&pcfg_pull_default>;
};
sd1_bus4: sd1-bus-width4 {
rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>,
<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>;
rockchip,config = <&pcfg_pull_default>;
};
};
};
uart0: serial@10124000 {
compatible = "snps,dw-apb-uart";
reg = <0x10124000 0x400>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <1>;
clocks = <&clk_gates1 8>;
status = "disabled";
};
uart1: serial@10126000 {
compatible = "snps,dw-apb-uart";
reg = <0x10126000 0x400>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <1>;
clocks = <&clk_gates1 10>;
status = "disabled";
};
uart2: serial@20064000 {
compatible = "snps,dw-apb-uart";
reg = <0x20064000 0x400>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <1>;
clocks = <&clk_gates1 12>;
status = "disabled";
};
uart3: serial@20068000 {
compatible = "snps,dw-apb-uart";
reg = <0x20068000 0x400>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <1>;
clocks = <&clk_gates1 14>;
status = "disabled";
};
dwmmc@10214000 {
compatible = "rockchip,rk2928-dw-mshc";
reg = <0x10214000 0x1000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clk_gates5 10>, <&clk_gates2 11>;
clock-names = "biu", "ciu";
status = "disabled";
};
dwmmc@10218000 {
compatible = "rockchip,rk2928-dw-mshc";
reg = <0x10218000 0x1000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clk_gates5 11>, <&clk_gates2 13>;
clock-names = "biu", "ciu";
status = "disabled";
};
};
};