mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
24835611a9
There have been reports about SDIO failing with certain WiFi chips in
descriptor chain mode. SD / eMMC are working fine.
So let's fall back to bounce buffer mode for command SD_IO_RW_EXTENDED.
This was reported to fix the error.
Fixes: 79ed05e329
"mmc: meson-gx: add support for descriptor chain mode"
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
1065 lines
28 KiB
C
1065 lines
28 KiB
C
/*
|
|
* Amlogic SD/eMMC driver for the GX/S905 family SoCs
|
|
*
|
|
* Copyright (c) 2016 BayLibre, SAS.
|
|
* Author: Kevin Hilman <khilman@baylibre.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, see <http://www.gnu.org/licenses/>.
|
|
* The full GNU General Public License is included in this distribution
|
|
* in the file called COPYING.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/device.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/mmc.h>
|
|
#include <linux/mmc/sdio.h>
|
|
#include <linux/mmc/slot-gpio.h>
|
|
#include <linux/io.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/bitfield.h>
|
|
|
|
#define DRIVER_NAME "meson-gx-mmc"
|
|
|
|
#define SD_EMMC_CLOCK 0x0
|
|
#define CLK_DIV_MASK GENMASK(5, 0)
|
|
#define CLK_DIV_MAX 63
|
|
#define CLK_SRC_MASK GENMASK(7, 6)
|
|
#define CLK_SRC_XTAL 0 /* external crystal */
|
|
#define CLK_SRC_XTAL_RATE 24000000
|
|
#define CLK_SRC_PLL 1 /* FCLK_DIV2 */
|
|
#define CLK_SRC_PLL_RATE 1000000000
|
|
#define CLK_CORE_PHASE_MASK GENMASK(9, 8)
|
|
#define CLK_TX_PHASE_MASK GENMASK(11, 10)
|
|
#define CLK_RX_PHASE_MASK GENMASK(13, 12)
|
|
#define CLK_PHASE_0 0
|
|
#define CLK_PHASE_90 1
|
|
#define CLK_PHASE_180 2
|
|
#define CLK_PHASE_270 3
|
|
#define CLK_ALWAYS_ON BIT(24)
|
|
|
|
#define SD_EMMC_DElAY 0x4
|
|
#define SD_EMMC_ADJUST 0x8
|
|
#define SD_EMMC_CALOUT 0x10
|
|
#define SD_EMMC_START 0x40
|
|
#define START_DESC_INIT BIT(0)
|
|
#define START_DESC_BUSY BIT(1)
|
|
#define START_DESC_ADDR_MASK GENMASK(31, 2)
|
|
|
|
#define SD_EMMC_CFG 0x44
|
|
#define CFG_BUS_WIDTH_MASK GENMASK(1, 0)
|
|
#define CFG_BUS_WIDTH_1 0x0
|
|
#define CFG_BUS_WIDTH_4 0x1
|
|
#define CFG_BUS_WIDTH_8 0x2
|
|
#define CFG_DDR BIT(2)
|
|
#define CFG_BLK_LEN_MASK GENMASK(7, 4)
|
|
#define CFG_RESP_TIMEOUT_MASK GENMASK(11, 8)
|
|
#define CFG_RC_CC_MASK GENMASK(15, 12)
|
|
#define CFG_STOP_CLOCK BIT(22)
|
|
#define CFG_CLK_ALWAYS_ON BIT(18)
|
|
#define CFG_CHK_DS BIT(20)
|
|
#define CFG_AUTO_CLK BIT(23)
|
|
|
|
#define SD_EMMC_STATUS 0x48
|
|
#define STATUS_BUSY BIT(31)
|
|
|
|
#define SD_EMMC_IRQ_EN 0x4c
|
|
#define IRQ_EN_MASK GENMASK(13, 0)
|
|
#define IRQ_RXD_ERR_MASK GENMASK(7, 0)
|
|
#define IRQ_TXD_ERR BIT(8)
|
|
#define IRQ_DESC_ERR BIT(9)
|
|
#define IRQ_RESP_ERR BIT(10)
|
|
#define IRQ_RESP_TIMEOUT BIT(11)
|
|
#define IRQ_DESC_TIMEOUT BIT(12)
|
|
#define IRQ_END_OF_CHAIN BIT(13)
|
|
#define IRQ_RESP_STATUS BIT(14)
|
|
#define IRQ_SDIO BIT(15)
|
|
|
|
#define SD_EMMC_CMD_CFG 0x50
|
|
#define SD_EMMC_CMD_ARG 0x54
|
|
#define SD_EMMC_CMD_DAT 0x58
|
|
#define SD_EMMC_CMD_RSP 0x5c
|
|
#define SD_EMMC_CMD_RSP1 0x60
|
|
#define SD_EMMC_CMD_RSP2 0x64
|
|
#define SD_EMMC_CMD_RSP3 0x68
|
|
|
|
#define SD_EMMC_RXD 0x94
|
|
#define SD_EMMC_TXD 0x94
|
|
#define SD_EMMC_LAST_REG SD_EMMC_TXD
|
|
|
|
#define SD_EMMC_CFG_BLK_SIZE 512 /* internal buffer max: 512 bytes */
|
|
#define SD_EMMC_CFG_RESP_TIMEOUT 256 /* in clock cycles */
|
|
#define SD_EMMC_CMD_TIMEOUT 1024 /* in ms */
|
|
#define SD_EMMC_CMD_TIMEOUT_DATA 4096 /* in ms */
|
|
#define SD_EMMC_CFG_CMD_GAP 16 /* in clock cycles */
|
|
#define SD_EMMC_DESC_BUF_LEN PAGE_SIZE
|
|
|
|
#define SD_EMMC_PRE_REQ_DONE BIT(0)
|
|
#define SD_EMMC_DESC_CHAIN_MODE BIT(1)
|
|
|
|
#define MUX_CLK_NUM_PARENTS 2
|
|
|
|
struct meson_tuning_params {
|
|
u8 core_phase;
|
|
u8 tx_phase;
|
|
u8 rx_phase;
|
|
};
|
|
|
|
struct sd_emmc_desc {
|
|
u32 cmd_cfg;
|
|
u32 cmd_arg;
|
|
u32 cmd_data;
|
|
u32 cmd_resp;
|
|
};
|
|
|
|
struct meson_host {
|
|
struct device *dev;
|
|
struct mmc_host *mmc;
|
|
struct mmc_command *cmd;
|
|
|
|
spinlock_t lock;
|
|
void __iomem *regs;
|
|
struct clk *core_clk;
|
|
struct clk_mux mux;
|
|
struct clk *mux_clk;
|
|
unsigned long current_clock;
|
|
|
|
struct clk_divider cfg_div;
|
|
struct clk *cfg_div_clk;
|
|
|
|
unsigned int bounce_buf_size;
|
|
void *bounce_buf;
|
|
dma_addr_t bounce_dma_addr;
|
|
struct sd_emmc_desc *descs;
|
|
dma_addr_t descs_dma_addr;
|
|
|
|
struct meson_tuning_params tp;
|
|
bool vqmmc_enabled;
|
|
};
|
|
|
|
#define CMD_CFG_LENGTH_MASK GENMASK(8, 0)
|
|
#define CMD_CFG_BLOCK_MODE BIT(9)
|
|
#define CMD_CFG_R1B BIT(10)
|
|
#define CMD_CFG_END_OF_CHAIN BIT(11)
|
|
#define CMD_CFG_TIMEOUT_MASK GENMASK(15, 12)
|
|
#define CMD_CFG_NO_RESP BIT(16)
|
|
#define CMD_CFG_NO_CMD BIT(17)
|
|
#define CMD_CFG_DATA_IO BIT(18)
|
|
#define CMD_CFG_DATA_WR BIT(19)
|
|
#define CMD_CFG_RESP_NOCRC BIT(20)
|
|
#define CMD_CFG_RESP_128 BIT(21)
|
|
#define CMD_CFG_RESP_NUM BIT(22)
|
|
#define CMD_CFG_DATA_NUM BIT(23)
|
|
#define CMD_CFG_CMD_INDEX_MASK GENMASK(29, 24)
|
|
#define CMD_CFG_ERROR BIT(30)
|
|
#define CMD_CFG_OWNER BIT(31)
|
|
|
|
#define CMD_DATA_MASK GENMASK(31, 2)
|
|
#define CMD_DATA_BIG_ENDIAN BIT(1)
|
|
#define CMD_DATA_SRAM BIT(0)
|
|
#define CMD_RESP_MASK GENMASK(31, 1)
|
|
#define CMD_RESP_SRAM BIT(0)
|
|
|
|
static unsigned int meson_mmc_get_timeout_msecs(struct mmc_data *data)
|
|
{
|
|
unsigned int timeout = data->timeout_ns / NSEC_PER_MSEC;
|
|
|
|
if (!timeout)
|
|
return SD_EMMC_CMD_TIMEOUT_DATA;
|
|
|
|
timeout = roundup_pow_of_two(timeout);
|
|
|
|
return min(timeout, 32768U); /* max. 2^15 ms */
|
|
}
|
|
|
|
static struct mmc_command *meson_mmc_get_next_command(struct mmc_command *cmd)
|
|
{
|
|
if (cmd->opcode == MMC_SET_BLOCK_COUNT && !cmd->error)
|
|
return cmd->mrq->cmd;
|
|
else if (mmc_op_multi(cmd->opcode) &&
|
|
(!cmd->mrq->sbc || cmd->error || cmd->data->error))
|
|
return cmd->mrq->stop;
|
|
else
|
|
return NULL;
|
|
}
|
|
|
|
static void meson_mmc_get_transfer_mode(struct mmc_host *mmc,
|
|
struct mmc_request *mrq)
|
|
{
|
|
struct mmc_data *data = mrq->data;
|
|
struct scatterlist *sg;
|
|
int i;
|
|
bool use_desc_chain_mode = true;
|
|
|
|
/*
|
|
* Broken SDIO with AP6255-based WiFi on Khadas VIM Pro has been
|
|
* reported. For some strange reason this occurs in descriptor
|
|
* chain mode only. So let's fall back to bounce buffer mode
|
|
* for command SD_IO_RW_EXTENDED.
|
|
*/
|
|
if (mrq->cmd->opcode == SD_IO_RW_EXTENDED)
|
|
return;
|
|
|
|
for_each_sg(data->sg, sg, data->sg_len, i)
|
|
/* check for 8 byte alignment */
|
|
if (sg->offset & 7) {
|
|
WARN_ONCE(1, "unaligned scatterlist buffer\n");
|
|
use_desc_chain_mode = false;
|
|
break;
|
|
}
|
|
|
|
if (use_desc_chain_mode)
|
|
data->host_cookie |= SD_EMMC_DESC_CHAIN_MODE;
|
|
}
|
|
|
|
static inline bool meson_mmc_desc_chain_mode(const struct mmc_data *data)
|
|
{
|
|
return data->host_cookie & SD_EMMC_DESC_CHAIN_MODE;
|
|
}
|
|
|
|
static inline bool meson_mmc_bounce_buf_read(const struct mmc_data *data)
|
|
{
|
|
return data && data->flags & MMC_DATA_READ &&
|
|
!meson_mmc_desc_chain_mode(data);
|
|
}
|
|
|
|
static void meson_mmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq)
|
|
{
|
|
struct mmc_data *data = mrq->data;
|
|
|
|
if (!data)
|
|
return;
|
|
|
|
meson_mmc_get_transfer_mode(mmc, mrq);
|
|
data->host_cookie |= SD_EMMC_PRE_REQ_DONE;
|
|
|
|
if (!meson_mmc_desc_chain_mode(data))
|
|
return;
|
|
|
|
data->sg_count = dma_map_sg(mmc_dev(mmc), data->sg, data->sg_len,
|
|
mmc_get_dma_dir(data));
|
|
if (!data->sg_count)
|
|
dev_err(mmc_dev(mmc), "dma_map_sg failed");
|
|
}
|
|
|
|
static void meson_mmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
|
|
int err)
|
|
{
|
|
struct mmc_data *data = mrq->data;
|
|
|
|
if (data && meson_mmc_desc_chain_mode(data) && data->sg_count)
|
|
dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len,
|
|
mmc_get_dma_dir(data));
|
|
}
|
|
|
|
static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate)
|
|
{
|
|
struct mmc_host *mmc = host->mmc;
|
|
int ret;
|
|
u32 cfg;
|
|
|
|
if (clk_rate) {
|
|
if (WARN_ON(clk_rate > mmc->f_max))
|
|
clk_rate = mmc->f_max;
|
|
else if (WARN_ON(clk_rate < mmc->f_min))
|
|
clk_rate = mmc->f_min;
|
|
}
|
|
|
|
if (clk_rate == host->current_clock)
|
|
return 0;
|
|
|
|
/* stop clock */
|
|
cfg = readl(host->regs + SD_EMMC_CFG);
|
|
if (!(cfg & CFG_STOP_CLOCK)) {
|
|
cfg |= CFG_STOP_CLOCK;
|
|
writel(cfg, host->regs + SD_EMMC_CFG);
|
|
}
|
|
|
|
dev_dbg(host->dev, "change clock rate %u -> %lu\n",
|
|
mmc->actual_clock, clk_rate);
|
|
|
|
if (!clk_rate) {
|
|
mmc->actual_clock = 0;
|
|
host->current_clock = 0;
|
|
/* return with clock being stopped */
|
|
return 0;
|
|
}
|
|
|
|
ret = clk_set_rate(host->cfg_div_clk, clk_rate);
|
|
if (ret) {
|
|
dev_err(host->dev, "Unable to set cfg_div_clk to %lu. ret=%d\n",
|
|
clk_rate, ret);
|
|
return ret;
|
|
}
|
|
|
|
mmc->actual_clock = clk_get_rate(host->cfg_div_clk);
|
|
host->current_clock = clk_rate;
|
|
|
|
if (clk_rate != mmc->actual_clock)
|
|
dev_dbg(host->dev,
|
|
"divider requested rate %lu != actual rate %u\n",
|
|
clk_rate, mmc->actual_clock);
|
|
|
|
/* (re)start clock */
|
|
cfg = readl(host->regs + SD_EMMC_CFG);
|
|
cfg &= ~CFG_STOP_CLOCK;
|
|
writel(cfg, host->regs + SD_EMMC_CFG);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The SD/eMMC IP block has an internal mux and divider used for
|
|
* generating the MMC clock. Use the clock framework to create and
|
|
* manage these clocks.
|
|
*/
|
|
static int meson_mmc_clk_init(struct meson_host *host)
|
|
{
|
|
struct clk_init_data init;
|
|
char clk_name[32];
|
|
int i, ret = 0;
|
|
const char *mux_parent_names[MUX_CLK_NUM_PARENTS];
|
|
const char *clk_div_parents[1];
|
|
u32 clk_reg, cfg;
|
|
|
|
/* get the mux parents */
|
|
for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
|
|
struct clk *clk;
|
|
char name[16];
|
|
|
|
snprintf(name, sizeof(name), "clkin%d", i);
|
|
clk = devm_clk_get(host->dev, name);
|
|
if (IS_ERR(clk)) {
|
|
if (clk != ERR_PTR(-EPROBE_DEFER))
|
|
dev_err(host->dev, "Missing clock %s\n", name);
|
|
return PTR_ERR(clk);
|
|
}
|
|
|
|
mux_parent_names[i] = __clk_get_name(clk);
|
|
}
|
|
|
|
/* create the mux */
|
|
snprintf(clk_name, sizeof(clk_name), "%s#mux", dev_name(host->dev));
|
|
init.name = clk_name;
|
|
init.ops = &clk_mux_ops;
|
|
init.flags = 0;
|
|
init.parent_names = mux_parent_names;
|
|
init.num_parents = MUX_CLK_NUM_PARENTS;
|
|
host->mux.reg = host->regs + SD_EMMC_CLOCK;
|
|
host->mux.shift = __bf_shf(CLK_SRC_MASK);
|
|
host->mux.mask = CLK_SRC_MASK;
|
|
host->mux.flags = 0;
|
|
host->mux.table = NULL;
|
|
host->mux.hw.init = &init;
|
|
|
|
host->mux_clk = devm_clk_register(host->dev, &host->mux.hw);
|
|
if (WARN_ON(IS_ERR(host->mux_clk)))
|
|
return PTR_ERR(host->mux_clk);
|
|
|
|
/* create the divider */
|
|
snprintf(clk_name, sizeof(clk_name), "%s#div", dev_name(host->dev));
|
|
init.name = clk_name;
|
|
init.ops = &clk_divider_ops;
|
|
init.flags = CLK_SET_RATE_PARENT;
|
|
clk_div_parents[0] = __clk_get_name(host->mux_clk);
|
|
init.parent_names = clk_div_parents;
|
|
init.num_parents = ARRAY_SIZE(clk_div_parents);
|
|
|
|
host->cfg_div.reg = host->regs + SD_EMMC_CLOCK;
|
|
host->cfg_div.shift = __bf_shf(CLK_DIV_MASK);
|
|
host->cfg_div.width = __builtin_popcountl(CLK_DIV_MASK);
|
|
host->cfg_div.hw.init = &init;
|
|
host->cfg_div.flags = CLK_DIVIDER_ONE_BASED |
|
|
CLK_DIVIDER_ROUND_CLOSEST | CLK_DIVIDER_ALLOW_ZERO;
|
|
|
|
host->cfg_div_clk = devm_clk_register(host->dev, &host->cfg_div.hw);
|
|
if (WARN_ON(PTR_ERR_OR_ZERO(host->cfg_div_clk)))
|
|
return PTR_ERR(host->cfg_div_clk);
|
|
|
|
/* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
|
|
clk_reg = 0;
|
|
clk_reg |= FIELD_PREP(CLK_CORE_PHASE_MASK, host->tp.core_phase);
|
|
clk_reg |= FIELD_PREP(CLK_TX_PHASE_MASK, host->tp.tx_phase);
|
|
clk_reg |= FIELD_PREP(CLK_RX_PHASE_MASK, host->tp.rx_phase);
|
|
clk_reg |= FIELD_PREP(CLK_SRC_MASK, CLK_SRC_XTAL);
|
|
clk_reg |= FIELD_PREP(CLK_DIV_MASK, CLK_DIV_MAX);
|
|
clk_reg &= ~CLK_ALWAYS_ON;
|
|
writel(clk_reg, host->regs + SD_EMMC_CLOCK);
|
|
|
|
/* Ensure clock starts in "auto" mode, not "always on" */
|
|
cfg = readl(host->regs + SD_EMMC_CFG);
|
|
cfg &= ~CFG_CLK_ALWAYS_ON;
|
|
cfg |= CFG_AUTO_CLK;
|
|
writel(cfg, host->regs + SD_EMMC_CFG);
|
|
|
|
ret = clk_prepare_enable(host->cfg_div_clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Get the nearest minimum clock to 400KHz */
|
|
host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000);
|
|
|
|
ret = meson_mmc_clk_set(host, host->mmc->f_min);
|
|
if (ret)
|
|
clk_disable_unprepare(host->cfg_div_clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void meson_mmc_set_tuning_params(struct mmc_host *mmc)
|
|
{
|
|
struct meson_host *host = mmc_priv(mmc);
|
|
u32 regval;
|
|
|
|
/* stop clock */
|
|
regval = readl(host->regs + SD_EMMC_CFG);
|
|
regval |= CFG_STOP_CLOCK;
|
|
writel(regval, host->regs + SD_EMMC_CFG);
|
|
|
|
regval = readl(host->regs + SD_EMMC_CLOCK);
|
|
regval &= ~CLK_CORE_PHASE_MASK;
|
|
regval |= FIELD_PREP(CLK_CORE_PHASE_MASK, host->tp.core_phase);
|
|
regval &= ~CLK_TX_PHASE_MASK;
|
|
regval |= FIELD_PREP(CLK_TX_PHASE_MASK, host->tp.tx_phase);
|
|
regval &= ~CLK_RX_PHASE_MASK;
|
|
regval |= FIELD_PREP(CLK_RX_PHASE_MASK, host->tp.rx_phase);
|
|
writel(regval, host->regs + SD_EMMC_CLOCK);
|
|
|
|
/* start clock */
|
|
regval = readl(host->regs + SD_EMMC_CFG);
|
|
regval &= ~CFG_STOP_CLOCK;
|
|
writel(regval, host->regs + SD_EMMC_CFG);
|
|
}
|
|
|
|
static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
struct meson_host *host = mmc_priv(mmc);
|
|
u32 bus_width;
|
|
u32 val, orig;
|
|
|
|
/*
|
|
* GPIO regulator, only controls switching between 1v8 and
|
|
* 3v3, doesn't support MMC_POWER_OFF, MMC_POWER_ON.
|
|
*/
|
|
switch (ios->power_mode) {
|
|
case MMC_POWER_OFF:
|
|
if (!IS_ERR(mmc->supply.vmmc))
|
|
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
|
|
|
|
if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled) {
|
|
regulator_disable(mmc->supply.vqmmc);
|
|
host->vqmmc_enabled = false;
|
|
}
|
|
|
|
break;
|
|
|
|
case MMC_POWER_UP:
|
|
if (!IS_ERR(mmc->supply.vmmc))
|
|
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
|
|
break;
|
|
|
|
case MMC_POWER_ON:
|
|
if (!IS_ERR(mmc->supply.vqmmc) && !host->vqmmc_enabled) {
|
|
int ret = regulator_enable(mmc->supply.vqmmc);
|
|
|
|
if (ret < 0)
|
|
dev_err(mmc_dev(mmc),
|
|
"failed to enable vqmmc regulator\n");
|
|
else
|
|
host->vqmmc_enabled = true;
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
|
|
meson_mmc_clk_set(host, ios->clock);
|
|
|
|
/* Bus width */
|
|
switch (ios->bus_width) {
|
|
case MMC_BUS_WIDTH_1:
|
|
bus_width = CFG_BUS_WIDTH_1;
|
|
break;
|
|
case MMC_BUS_WIDTH_4:
|
|
bus_width = CFG_BUS_WIDTH_4;
|
|
break;
|
|
case MMC_BUS_WIDTH_8:
|
|
bus_width = CFG_BUS_WIDTH_8;
|
|
break;
|
|
default:
|
|
dev_err(host->dev, "Invalid ios->bus_width: %u. Setting to 4.\n",
|
|
ios->bus_width);
|
|
bus_width = CFG_BUS_WIDTH_4;
|
|
}
|
|
|
|
val = readl(host->regs + SD_EMMC_CFG);
|
|
orig = val;
|
|
|
|
val &= ~CFG_BUS_WIDTH_MASK;
|
|
val |= FIELD_PREP(CFG_BUS_WIDTH_MASK, bus_width);
|
|
|
|
val &= ~CFG_DDR;
|
|
if (ios->timing == MMC_TIMING_UHS_DDR50 ||
|
|
ios->timing == MMC_TIMING_MMC_DDR52 ||
|
|
ios->timing == MMC_TIMING_MMC_HS400)
|
|
val |= CFG_DDR;
|
|
|
|
val &= ~CFG_CHK_DS;
|
|
if (ios->timing == MMC_TIMING_MMC_HS400)
|
|
val |= CFG_CHK_DS;
|
|
|
|
if (val != orig) {
|
|
writel(val, host->regs + SD_EMMC_CFG);
|
|
dev_dbg(host->dev, "%s: SD_EMMC_CFG: 0x%08x -> 0x%08x\n",
|
|
__func__, orig, val);
|
|
}
|
|
}
|
|
|
|
static void meson_mmc_request_done(struct mmc_host *mmc,
|
|
struct mmc_request *mrq)
|
|
{
|
|
struct meson_host *host = mmc_priv(mmc);
|
|
|
|
host->cmd = NULL;
|
|
mmc_request_done(host->mmc, mrq);
|
|
}
|
|
|
|
static void meson_mmc_set_blksz(struct mmc_host *mmc, unsigned int blksz)
|
|
{
|
|
struct meson_host *host = mmc_priv(mmc);
|
|
u32 cfg, blksz_old;
|
|
|
|
cfg = readl(host->regs + SD_EMMC_CFG);
|
|
blksz_old = FIELD_GET(CFG_BLK_LEN_MASK, cfg);
|
|
|
|
if (!is_power_of_2(blksz))
|
|
dev_err(host->dev, "blksz %u is not a power of 2\n", blksz);
|
|
|
|
blksz = ilog2(blksz);
|
|
|
|
/* check if block-size matches, if not update */
|
|
if (blksz == blksz_old)
|
|
return;
|
|
|
|
dev_dbg(host->dev, "%s: update blk_len %d -> %d\n", __func__,
|
|
blksz_old, blksz);
|
|
|
|
cfg &= ~CFG_BLK_LEN_MASK;
|
|
cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, blksz);
|
|
writel(cfg, host->regs + SD_EMMC_CFG);
|
|
}
|
|
|
|
static void meson_mmc_set_response_bits(struct mmc_command *cmd, u32 *cmd_cfg)
|
|
{
|
|
if (cmd->flags & MMC_RSP_PRESENT) {
|
|
if (cmd->flags & MMC_RSP_136)
|
|
*cmd_cfg |= CMD_CFG_RESP_128;
|
|
*cmd_cfg |= CMD_CFG_RESP_NUM;
|
|
|
|
if (!(cmd->flags & MMC_RSP_CRC))
|
|
*cmd_cfg |= CMD_CFG_RESP_NOCRC;
|
|
|
|
if (cmd->flags & MMC_RSP_BUSY)
|
|
*cmd_cfg |= CMD_CFG_R1B;
|
|
} else {
|
|
*cmd_cfg |= CMD_CFG_NO_RESP;
|
|
}
|
|
}
|
|
|
|
static void meson_mmc_desc_chain_transfer(struct mmc_host *mmc, u32 cmd_cfg)
|
|
{
|
|
struct meson_host *host = mmc_priv(mmc);
|
|
struct sd_emmc_desc *desc = host->descs;
|
|
struct mmc_data *data = host->cmd->data;
|
|
struct scatterlist *sg;
|
|
u32 start;
|
|
int i;
|
|
|
|
if (data->flags & MMC_DATA_WRITE)
|
|
cmd_cfg |= CMD_CFG_DATA_WR;
|
|
|
|
if (data->blocks > 1) {
|
|
cmd_cfg |= CMD_CFG_BLOCK_MODE;
|
|
meson_mmc_set_blksz(mmc, data->blksz);
|
|
}
|
|
|
|
for_each_sg(data->sg, sg, data->sg_count, i) {
|
|
unsigned int len = sg_dma_len(sg);
|
|
|
|
if (data->blocks > 1)
|
|
len /= data->blksz;
|
|
|
|
desc[i].cmd_cfg = cmd_cfg;
|
|
desc[i].cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, len);
|
|
if (i > 0)
|
|
desc[i].cmd_cfg |= CMD_CFG_NO_CMD;
|
|
desc[i].cmd_arg = host->cmd->arg;
|
|
desc[i].cmd_resp = 0;
|
|
desc[i].cmd_data = sg_dma_address(sg);
|
|
}
|
|
desc[data->sg_count - 1].cmd_cfg |= CMD_CFG_END_OF_CHAIN;
|
|
|
|
dma_wmb(); /* ensure descriptor is written before kicked */
|
|
start = host->descs_dma_addr | START_DESC_BUSY;
|
|
writel(start, host->regs + SD_EMMC_START);
|
|
}
|
|
|
|
static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
|
|
{
|
|
struct meson_host *host = mmc_priv(mmc);
|
|
struct mmc_data *data = cmd->data;
|
|
u32 cmd_cfg = 0, cmd_data = 0;
|
|
unsigned int xfer_bytes = 0;
|
|
|
|
/* Setup descriptors */
|
|
dma_rmb();
|
|
|
|
host->cmd = cmd;
|
|
|
|
cmd_cfg |= FIELD_PREP(CMD_CFG_CMD_INDEX_MASK, cmd->opcode);
|
|
cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */
|
|
|
|
meson_mmc_set_response_bits(cmd, &cmd_cfg);
|
|
|
|
/* data? */
|
|
if (data) {
|
|
data->bytes_xfered = 0;
|
|
cmd_cfg |= CMD_CFG_DATA_IO;
|
|
cmd_cfg |= FIELD_PREP(CMD_CFG_TIMEOUT_MASK,
|
|
ilog2(meson_mmc_get_timeout_msecs(data)));
|
|
|
|
if (meson_mmc_desc_chain_mode(data)) {
|
|
meson_mmc_desc_chain_transfer(mmc, cmd_cfg);
|
|
return;
|
|
}
|
|
|
|
if (data->blocks > 1) {
|
|
cmd_cfg |= CMD_CFG_BLOCK_MODE;
|
|
cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK,
|
|
data->blocks);
|
|
meson_mmc_set_blksz(mmc, data->blksz);
|
|
} else {
|
|
cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, data->blksz);
|
|
}
|
|
|
|
xfer_bytes = data->blksz * data->blocks;
|
|
if (data->flags & MMC_DATA_WRITE) {
|
|
cmd_cfg |= CMD_CFG_DATA_WR;
|
|
WARN_ON(xfer_bytes > host->bounce_buf_size);
|
|
sg_copy_to_buffer(data->sg, data->sg_len,
|
|
host->bounce_buf, xfer_bytes);
|
|
dma_wmb();
|
|
}
|
|
|
|
cmd_data = host->bounce_dma_addr & CMD_DATA_MASK;
|
|
} else {
|
|
cmd_cfg |= FIELD_PREP(CMD_CFG_TIMEOUT_MASK,
|
|
ilog2(SD_EMMC_CMD_TIMEOUT));
|
|
}
|
|
|
|
/* Last descriptor */
|
|
cmd_cfg |= CMD_CFG_END_OF_CHAIN;
|
|
writel(cmd_cfg, host->regs + SD_EMMC_CMD_CFG);
|
|
writel(cmd_data, host->regs + SD_EMMC_CMD_DAT);
|
|
writel(0, host->regs + SD_EMMC_CMD_RSP);
|
|
wmb(); /* ensure descriptor is written before kicked */
|
|
writel(cmd->arg, host->regs + SD_EMMC_CMD_ARG);
|
|
}
|
|
|
|
static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
|
|
{
|
|
struct meson_host *host = mmc_priv(mmc);
|
|
bool needs_pre_post_req = mrq->data &&
|
|
!(mrq->data->host_cookie & SD_EMMC_PRE_REQ_DONE);
|
|
|
|
if (needs_pre_post_req) {
|
|
meson_mmc_get_transfer_mode(mmc, mrq);
|
|
if (!meson_mmc_desc_chain_mode(mrq->data))
|
|
needs_pre_post_req = false;
|
|
}
|
|
|
|
if (needs_pre_post_req)
|
|
meson_mmc_pre_req(mmc, mrq);
|
|
|
|
/* Stop execution */
|
|
writel(0, host->regs + SD_EMMC_START);
|
|
|
|
meson_mmc_start_cmd(mmc, mrq->sbc ?: mrq->cmd);
|
|
|
|
if (needs_pre_post_req)
|
|
meson_mmc_post_req(mmc, mrq, 0);
|
|
}
|
|
|
|
static void meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd)
|
|
{
|
|
struct meson_host *host = mmc_priv(mmc);
|
|
|
|
if (cmd->flags & MMC_RSP_136) {
|
|
cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP3);
|
|
cmd->resp[1] = readl(host->regs + SD_EMMC_CMD_RSP2);
|
|
cmd->resp[2] = readl(host->regs + SD_EMMC_CMD_RSP1);
|
|
cmd->resp[3] = readl(host->regs + SD_EMMC_CMD_RSP);
|
|
} else if (cmd->flags & MMC_RSP_PRESENT) {
|
|
cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP);
|
|
}
|
|
}
|
|
|
|
static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
|
|
{
|
|
struct meson_host *host = dev_id;
|
|
struct mmc_command *cmd;
|
|
struct mmc_data *data;
|
|
u32 irq_en, status, raw_status;
|
|
irqreturn_t ret = IRQ_HANDLED;
|
|
|
|
if (WARN_ON(!host))
|
|
return IRQ_NONE;
|
|
|
|
cmd = host->cmd;
|
|
|
|
if (WARN_ON(!cmd))
|
|
return IRQ_NONE;
|
|
|
|
data = cmd->data;
|
|
|
|
spin_lock(&host->lock);
|
|
irq_en = readl(host->regs + SD_EMMC_IRQ_EN);
|
|
raw_status = readl(host->regs + SD_EMMC_STATUS);
|
|
status = raw_status & irq_en;
|
|
|
|
if (!status) {
|
|
dev_warn(host->dev, "Spurious IRQ! status=0x%08x, irq_en=0x%08x\n",
|
|
raw_status, irq_en);
|
|
ret = IRQ_NONE;
|
|
goto out;
|
|
}
|
|
|
|
meson_mmc_read_resp(host->mmc, cmd);
|
|
|
|
cmd->error = 0;
|
|
if (status & IRQ_RXD_ERR_MASK) {
|
|
dev_dbg(host->dev, "Unhandled IRQ: RXD error\n");
|
|
cmd->error = -EILSEQ;
|
|
}
|
|
if (status & IRQ_TXD_ERR) {
|
|
dev_dbg(host->dev, "Unhandled IRQ: TXD error\n");
|
|
cmd->error = -EILSEQ;
|
|
}
|
|
if (status & IRQ_DESC_ERR)
|
|
dev_dbg(host->dev, "Unhandled IRQ: Descriptor error\n");
|
|
if (status & IRQ_RESP_ERR) {
|
|
dev_dbg(host->dev, "Unhandled IRQ: Response error\n");
|
|
cmd->error = -EILSEQ;
|
|
}
|
|
if (status & IRQ_RESP_TIMEOUT) {
|
|
dev_dbg(host->dev, "Unhandled IRQ: Response timeout\n");
|
|
cmd->error = -ETIMEDOUT;
|
|
}
|
|
if (status & IRQ_DESC_TIMEOUT) {
|
|
dev_dbg(host->dev, "Unhandled IRQ: Descriptor timeout\n");
|
|
cmd->error = -ETIMEDOUT;
|
|
}
|
|
if (status & IRQ_SDIO)
|
|
dev_dbg(host->dev, "Unhandled IRQ: SDIO.\n");
|
|
|
|
if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) {
|
|
if (data && !cmd->error)
|
|
data->bytes_xfered = data->blksz * data->blocks;
|
|
if (meson_mmc_bounce_buf_read(data) ||
|
|
meson_mmc_get_next_command(cmd))
|
|
ret = IRQ_WAKE_THREAD;
|
|
} else {
|
|
dev_warn(host->dev, "Unknown IRQ! status=0x%04x: MMC CMD%u arg=0x%08x flags=0x%08x stop=%d\n",
|
|
status, cmd->opcode, cmd->arg,
|
|
cmd->flags, cmd->mrq->stop ? 1 : 0);
|
|
if (cmd->data) {
|
|
struct mmc_data *data = cmd->data;
|
|
|
|
dev_warn(host->dev, "\tblksz %u blocks %u flags 0x%08x (%s%s)",
|
|
data->blksz, data->blocks, data->flags,
|
|
data->flags & MMC_DATA_WRITE ? "write" : "",
|
|
data->flags & MMC_DATA_READ ? "read" : "");
|
|
}
|
|
}
|
|
|
|
out:
|
|
/* ack all (enabled) interrupts */
|
|
writel(status, host->regs + SD_EMMC_STATUS);
|
|
|
|
if (ret == IRQ_HANDLED)
|
|
meson_mmc_request_done(host->mmc, cmd->mrq);
|
|
|
|
spin_unlock(&host->lock);
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
|
|
{
|
|
struct meson_host *host = dev_id;
|
|
struct mmc_command *next_cmd, *cmd = host->cmd;
|
|
struct mmc_data *data;
|
|
unsigned int xfer_bytes;
|
|
|
|
if (WARN_ON(!cmd))
|
|
return IRQ_NONE;
|
|
|
|
data = cmd->data;
|
|
if (meson_mmc_bounce_buf_read(data)) {
|
|
xfer_bytes = data->blksz * data->blocks;
|
|
WARN_ON(xfer_bytes > host->bounce_buf_size);
|
|
sg_copy_from_buffer(data->sg, data->sg_len,
|
|
host->bounce_buf, xfer_bytes);
|
|
}
|
|
|
|
next_cmd = meson_mmc_get_next_command(cmd);
|
|
if (next_cmd)
|
|
meson_mmc_start_cmd(host->mmc, next_cmd);
|
|
else
|
|
meson_mmc_request_done(host->mmc, cmd->mrq);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int meson_mmc_execute_tuning(struct mmc_host *mmc, u32 opcode)
|
|
{
|
|
struct meson_host *host = mmc_priv(mmc);
|
|
struct meson_tuning_params tp_old = host->tp;
|
|
int ret = -EINVAL, i, cmd_error;
|
|
|
|
dev_info(mmc_dev(mmc), "(re)tuning...\n");
|
|
|
|
for (i = CLK_PHASE_0; i <= CLK_PHASE_270; i++) {
|
|
host->tp.rx_phase = i;
|
|
/* exclude the active parameter set if retuning */
|
|
if (!memcmp(&tp_old, &host->tp, sizeof(tp_old)) &&
|
|
mmc->doing_retune)
|
|
continue;
|
|
meson_mmc_set_tuning_params(mmc);
|
|
ret = mmc_send_tuning(mmc, opcode, &cmd_error);
|
|
if (!ret)
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* NOTE: we only need this until the GPIO/pinctrl driver can handle
|
|
* interrupts. For now, the MMC core will use this for polling.
|
|
*/
|
|
static int meson_mmc_get_cd(struct mmc_host *mmc)
|
|
{
|
|
int status = mmc_gpio_get_cd(mmc);
|
|
|
|
if (status == -ENOSYS)
|
|
return 1; /* assume present */
|
|
|
|
return status;
|
|
}
|
|
|
|
static void meson_mmc_cfg_init(struct meson_host *host)
|
|
{
|
|
u32 cfg = 0;
|
|
|
|
cfg |= FIELD_PREP(CFG_RESP_TIMEOUT_MASK,
|
|
ilog2(SD_EMMC_CFG_RESP_TIMEOUT));
|
|
cfg |= FIELD_PREP(CFG_RC_CC_MASK, ilog2(SD_EMMC_CFG_CMD_GAP));
|
|
cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, ilog2(SD_EMMC_CFG_BLK_SIZE));
|
|
|
|
writel(cfg, host->regs + SD_EMMC_CFG);
|
|
}
|
|
|
|
static const struct mmc_host_ops meson_mmc_ops = {
|
|
.request = meson_mmc_request,
|
|
.set_ios = meson_mmc_set_ios,
|
|
.get_cd = meson_mmc_get_cd,
|
|
.pre_req = meson_mmc_pre_req,
|
|
.post_req = meson_mmc_post_req,
|
|
.execute_tuning = meson_mmc_execute_tuning,
|
|
};
|
|
|
|
static int meson_mmc_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *res;
|
|
struct meson_host *host;
|
|
struct mmc_host *mmc;
|
|
int ret, irq;
|
|
|
|
mmc = mmc_alloc_host(sizeof(struct meson_host), &pdev->dev);
|
|
if (!mmc)
|
|
return -ENOMEM;
|
|
host = mmc_priv(mmc);
|
|
host->mmc = mmc;
|
|
host->dev = &pdev->dev;
|
|
dev_set_drvdata(&pdev->dev, host);
|
|
|
|
spin_lock_init(&host->lock);
|
|
|
|
/* Get regulators and the supported OCR mask */
|
|
host->vqmmc_enabled = false;
|
|
ret = mmc_regulator_get_supply(mmc);
|
|
if (ret == -EPROBE_DEFER)
|
|
goto free_host;
|
|
|
|
ret = mmc_of_parse(mmc);
|
|
if (ret) {
|
|
if (ret != -EPROBE_DEFER)
|
|
dev_warn(&pdev->dev, "error parsing DT: %d\n", ret);
|
|
goto free_host;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
host->regs = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(host->regs)) {
|
|
ret = PTR_ERR(host->regs);
|
|
goto free_host;
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (!irq) {
|
|
dev_err(&pdev->dev, "failed to get interrupt resource.\n");
|
|
ret = -EINVAL;
|
|
goto free_host;
|
|
}
|
|
|
|
host->core_clk = devm_clk_get(&pdev->dev, "core");
|
|
if (IS_ERR(host->core_clk)) {
|
|
ret = PTR_ERR(host->core_clk);
|
|
goto free_host;
|
|
}
|
|
|
|
ret = clk_prepare_enable(host->core_clk);
|
|
if (ret)
|
|
goto free_host;
|
|
|
|
host->tp.core_phase = CLK_PHASE_180;
|
|
host->tp.tx_phase = CLK_PHASE_0;
|
|
host->tp.rx_phase = CLK_PHASE_0;
|
|
|
|
ret = meson_mmc_clk_init(host);
|
|
if (ret)
|
|
goto err_core_clk;
|
|
|
|
/* Stop execution */
|
|
writel(0, host->regs + SD_EMMC_START);
|
|
|
|
/* clear, ack, enable all interrupts */
|
|
writel(0, host->regs + SD_EMMC_IRQ_EN);
|
|
writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS);
|
|
writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN);
|
|
|
|
/* set config to sane default */
|
|
meson_mmc_cfg_init(host);
|
|
|
|
ret = devm_request_threaded_irq(&pdev->dev, irq, meson_mmc_irq,
|
|
meson_mmc_irq_thread, IRQF_SHARED,
|
|
NULL, host);
|
|
if (ret)
|
|
goto err_div_clk;
|
|
|
|
mmc->caps |= MMC_CAP_CMD23;
|
|
mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
|
|
mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size;
|
|
mmc->max_segs = SD_EMMC_DESC_BUF_LEN / sizeof(struct sd_emmc_desc);
|
|
mmc->max_seg_size = mmc->max_req_size;
|
|
|
|
/* data bounce buffer */
|
|
host->bounce_buf_size = mmc->max_req_size;
|
|
host->bounce_buf =
|
|
dma_alloc_coherent(host->dev, host->bounce_buf_size,
|
|
&host->bounce_dma_addr, GFP_KERNEL);
|
|
if (host->bounce_buf == NULL) {
|
|
dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
|
|
ret = -ENOMEM;
|
|
goto err_div_clk;
|
|
}
|
|
|
|
host->descs = dma_alloc_coherent(host->dev, SD_EMMC_DESC_BUF_LEN,
|
|
&host->descs_dma_addr, GFP_KERNEL);
|
|
if (!host->descs) {
|
|
dev_err(host->dev, "Allocating descriptor DMA buffer failed\n");
|
|
ret = -ENOMEM;
|
|
goto err_bounce_buf;
|
|
}
|
|
|
|
mmc->ops = &meson_mmc_ops;
|
|
mmc_add_host(mmc);
|
|
|
|
return 0;
|
|
|
|
err_bounce_buf:
|
|
dma_free_coherent(host->dev, host->bounce_buf_size,
|
|
host->bounce_buf, host->bounce_dma_addr);
|
|
err_div_clk:
|
|
clk_disable_unprepare(host->cfg_div_clk);
|
|
err_core_clk:
|
|
clk_disable_unprepare(host->core_clk);
|
|
free_host:
|
|
mmc_free_host(mmc);
|
|
return ret;
|
|
}
|
|
|
|
static int meson_mmc_remove(struct platform_device *pdev)
|
|
{
|
|
struct meson_host *host = dev_get_drvdata(&pdev->dev);
|
|
|
|
mmc_remove_host(host->mmc);
|
|
|
|
/* disable interrupts */
|
|
writel(0, host->regs + SD_EMMC_IRQ_EN);
|
|
|
|
dma_free_coherent(host->dev, SD_EMMC_DESC_BUF_LEN,
|
|
host->descs, host->descs_dma_addr);
|
|
dma_free_coherent(host->dev, host->bounce_buf_size,
|
|
host->bounce_buf, host->bounce_dma_addr);
|
|
|
|
clk_disable_unprepare(host->cfg_div_clk);
|
|
clk_disable_unprepare(host->core_clk);
|
|
|
|
mmc_free_host(host->mmc);
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id meson_mmc_of_match[] = {
|
|
{ .compatible = "amlogic,meson-gx-mmc", },
|
|
{ .compatible = "amlogic,meson-gxbb-mmc", },
|
|
{ .compatible = "amlogic,meson-gxl-mmc", },
|
|
{ .compatible = "amlogic,meson-gxm-mmc", },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, meson_mmc_of_match);
|
|
|
|
static struct platform_driver meson_mmc_driver = {
|
|
.probe = meson_mmc_probe,
|
|
.remove = meson_mmc_remove,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.of_match_table = of_match_ptr(meson_mmc_of_match),
|
|
},
|
|
};
|
|
|
|
module_platform_driver(meson_mmc_driver);
|
|
|
|
MODULE_DESCRIPTION("Amlogic S905*/GX* SD/eMMC driver");
|
|
MODULE_AUTHOR("Kevin Hilman <khilman@baylibre.com>");
|
|
MODULE_LICENSE("GPL v2");
|