mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-10 05:37:20 +07:00
6d32af019a
Second round of input updates for 3.19.
418 lines
10 KiB
C
418 lines
10 KiB
C
/*
|
|
* Copyright (C) ST-Ericsson SA 2010
|
|
*
|
|
* License Terms: GNU General Public License, version 2
|
|
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/input.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/input/matrix_keypad.h>
|
|
#include <linux/mfd/stmpe.h>
|
|
|
|
/* These are at the same addresses in all STMPE variants */
|
|
#define STMPE_KPC_COL 0x60
|
|
#define STMPE_KPC_ROW_MSB 0x61
|
|
#define STMPE_KPC_ROW_LSB 0x62
|
|
#define STMPE_KPC_CTRL_MSB 0x63
|
|
#define STMPE_KPC_CTRL_LSB 0x64
|
|
#define STMPE_KPC_COMBI_KEY_0 0x65
|
|
#define STMPE_KPC_COMBI_KEY_1 0x66
|
|
#define STMPE_KPC_COMBI_KEY_2 0x67
|
|
#define STMPE_KPC_DATA_BYTE0 0x68
|
|
#define STMPE_KPC_DATA_BYTE1 0x69
|
|
#define STMPE_KPC_DATA_BYTE2 0x6a
|
|
#define STMPE_KPC_DATA_BYTE3 0x6b
|
|
#define STMPE_KPC_DATA_BYTE4 0x6c
|
|
|
|
#define STMPE_KPC_CTRL_LSB_SCAN (0x1 << 0)
|
|
#define STMPE_KPC_CTRL_LSB_DEBOUNCE (0x7f << 1)
|
|
#define STMPE_KPC_CTRL_MSB_SCAN_COUNT (0xf << 4)
|
|
|
|
#define STMPE_KPC_ROW_MSB_ROWS 0xff
|
|
|
|
#define STMPE_KPC_DATA_UP (0x1 << 7)
|
|
#define STMPE_KPC_DATA_ROW (0xf << 3)
|
|
#define STMPE_KPC_DATA_COL (0x7 << 0)
|
|
#define STMPE_KPC_DATA_NOKEY_MASK 0x78
|
|
|
|
#define STMPE_KEYPAD_MAX_DEBOUNCE 127
|
|
#define STMPE_KEYPAD_MAX_SCAN_COUNT 15
|
|
|
|
#define STMPE_KEYPAD_MAX_ROWS 8
|
|
#define STMPE_KEYPAD_MAX_COLS 8
|
|
#define STMPE_KEYPAD_ROW_SHIFT 3
|
|
#define STMPE_KEYPAD_KEYMAP_MAX_SIZE \
|
|
(STMPE_KEYPAD_MAX_ROWS * STMPE_KEYPAD_MAX_COLS)
|
|
|
|
/**
|
|
* struct stmpe_keypad_variant - model-specific attributes
|
|
* @auto_increment: whether the KPC_DATA_BYTE register address
|
|
* auto-increments on multiple read
|
|
* @set_pullup: whether the pins need to have their pull-ups set
|
|
* @num_data: number of data bytes
|
|
* @num_normal_data: number of normal keys' data bytes
|
|
* @max_cols: maximum number of columns supported
|
|
* @max_rows: maximum number of rows supported
|
|
* @col_gpios: bitmask of gpios which can be used for columns
|
|
* @row_gpios: bitmask of gpios which can be used for rows
|
|
*/
|
|
struct stmpe_keypad_variant {
|
|
bool auto_increment;
|
|
bool set_pullup;
|
|
int num_data;
|
|
int num_normal_data;
|
|
int max_cols;
|
|
int max_rows;
|
|
unsigned int col_gpios;
|
|
unsigned int row_gpios;
|
|
};
|
|
|
|
static const struct stmpe_keypad_variant stmpe_keypad_variants[] = {
|
|
[STMPE1601] = {
|
|
.auto_increment = true,
|
|
.num_data = 5,
|
|
.num_normal_data = 3,
|
|
.max_cols = 8,
|
|
.max_rows = 8,
|
|
.col_gpios = 0x000ff, /* GPIO 0 - 7 */
|
|
.row_gpios = 0x0ff00, /* GPIO 8 - 15 */
|
|
},
|
|
[STMPE2401] = {
|
|
.auto_increment = false,
|
|
.set_pullup = true,
|
|
.num_data = 3,
|
|
.num_normal_data = 2,
|
|
.max_cols = 8,
|
|
.max_rows = 12,
|
|
.col_gpios = 0x0000ff, /* GPIO 0 - 7*/
|
|
.row_gpios = 0x1f7f00, /* GPIO 8-14, 16-20 */
|
|
},
|
|
[STMPE2403] = {
|
|
.auto_increment = true,
|
|
.set_pullup = true,
|
|
.num_data = 5,
|
|
.num_normal_data = 3,
|
|
.max_cols = 8,
|
|
.max_rows = 12,
|
|
.col_gpios = 0x0000ff, /* GPIO 0 - 7*/
|
|
.row_gpios = 0x1fef00, /* GPIO 8-14, 16-20 */
|
|
},
|
|
};
|
|
|
|
/**
|
|
* struct stmpe_keypad - STMPE keypad state container
|
|
* @stmpe: pointer to parent STMPE device
|
|
* @input: spawned input device
|
|
* @variant: STMPE variant
|
|
* @debounce_ms: debounce interval, in ms. Maximum is
|
|
* %STMPE_KEYPAD_MAX_DEBOUNCE.
|
|
* @scan_count: number of key scanning cycles to confirm key data.
|
|
* Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT.
|
|
* @no_autorepeat: disable key autorepeat
|
|
* @rows: bitmask for the rows
|
|
* @cols: bitmask for the columns
|
|
* @keymap: the keymap
|
|
*/
|
|
struct stmpe_keypad {
|
|
struct stmpe *stmpe;
|
|
struct input_dev *input;
|
|
const struct stmpe_keypad_variant *variant;
|
|
unsigned int debounce_ms;
|
|
unsigned int scan_count;
|
|
bool no_autorepeat;
|
|
unsigned int rows;
|
|
unsigned int cols;
|
|
unsigned short keymap[STMPE_KEYPAD_KEYMAP_MAX_SIZE];
|
|
};
|
|
|
|
static int stmpe_keypad_read_data(struct stmpe_keypad *keypad, u8 *data)
|
|
{
|
|
const struct stmpe_keypad_variant *variant = keypad->variant;
|
|
struct stmpe *stmpe = keypad->stmpe;
|
|
int ret;
|
|
int i;
|
|
|
|
if (variant->auto_increment)
|
|
return stmpe_block_read(stmpe, STMPE_KPC_DATA_BYTE0,
|
|
variant->num_data, data);
|
|
|
|
for (i = 0; i < variant->num_data; i++) {
|
|
ret = stmpe_reg_read(stmpe, STMPE_KPC_DATA_BYTE0 + i);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
data[i] = ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t stmpe_keypad_irq(int irq, void *dev)
|
|
{
|
|
struct stmpe_keypad *keypad = dev;
|
|
struct input_dev *input = keypad->input;
|
|
const struct stmpe_keypad_variant *variant = keypad->variant;
|
|
u8 fifo[variant->num_data];
|
|
int ret;
|
|
int i;
|
|
|
|
ret = stmpe_keypad_read_data(keypad, fifo);
|
|
if (ret < 0)
|
|
return IRQ_NONE;
|
|
|
|
for (i = 0; i < variant->num_normal_data; i++) {
|
|
u8 data = fifo[i];
|
|
int row = (data & STMPE_KPC_DATA_ROW) >> 3;
|
|
int col = data & STMPE_KPC_DATA_COL;
|
|
int code = MATRIX_SCAN_CODE(row, col, STMPE_KEYPAD_ROW_SHIFT);
|
|
bool up = data & STMPE_KPC_DATA_UP;
|
|
|
|
if ((data & STMPE_KPC_DATA_NOKEY_MASK)
|
|
== STMPE_KPC_DATA_NOKEY_MASK)
|
|
continue;
|
|
|
|
input_event(input, EV_MSC, MSC_SCAN, code);
|
|
input_report_key(input, keypad->keymap[code], !up);
|
|
input_sync(input);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad)
|
|
{
|
|
const struct stmpe_keypad_variant *variant = keypad->variant;
|
|
unsigned int col_gpios = variant->col_gpios;
|
|
unsigned int row_gpios = variant->row_gpios;
|
|
struct stmpe *stmpe = keypad->stmpe;
|
|
u8 pureg = stmpe->regs[STMPE_IDX_GPPUR_LSB];
|
|
unsigned int pins = 0;
|
|
unsigned int pu_pins = 0;
|
|
int ret;
|
|
int i;
|
|
|
|
/*
|
|
* Figure out which pins need to be set to the keypad alternate
|
|
* function.
|
|
*
|
|
* {cols,rows}_gpios are bitmasks of which pins on the chip can be used
|
|
* for the keypad.
|
|
*
|
|
* keypad->{cols,rows} are a bitmask of which pins (of the ones useable
|
|
* for the keypad) are used on the board.
|
|
*/
|
|
|
|
for (i = 0; i < variant->max_cols; i++) {
|
|
int num = __ffs(col_gpios);
|
|
|
|
if (keypad->cols & (1 << i)) {
|
|
pins |= 1 << num;
|
|
pu_pins |= 1 << num;
|
|
}
|
|
|
|
col_gpios &= ~(1 << num);
|
|
}
|
|
|
|
for (i = 0; i < variant->max_rows; i++) {
|
|
int num = __ffs(row_gpios);
|
|
|
|
if (keypad->rows & (1 << i))
|
|
pins |= 1 << num;
|
|
|
|
row_gpios &= ~(1 << num);
|
|
}
|
|
|
|
ret = stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* On STMPE24xx, set pin bias to pull-up on all keypad input
|
|
* pins (columns), this incidentally happen to be maximum 8 pins
|
|
* and placed at GPIO0-7 so only the LSB of the pull up register
|
|
* ever needs to be written.
|
|
*/
|
|
if (variant->set_pullup) {
|
|
u8 val;
|
|
|
|
ret = stmpe_reg_read(stmpe, pureg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Do not touch unused pins, may be used for GPIO */
|
|
val = ret & ~pu_pins;
|
|
val |= pu_pins;
|
|
|
|
ret = stmpe_reg_write(stmpe, pureg, val);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
|
|
{
|
|
const struct stmpe_keypad_variant *variant = keypad->variant;
|
|
struct stmpe *stmpe = keypad->stmpe;
|
|
int ret;
|
|
|
|
if (keypad->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE)
|
|
return -EINVAL;
|
|
|
|
if (keypad->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT)
|
|
return -EINVAL;
|
|
|
|
ret = stmpe_enable(stmpe, STMPE_BLOCK_KEYPAD);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = stmpe_keypad_altfunc_init(keypad);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = stmpe_reg_write(stmpe, STMPE_KPC_COL, keypad->cols);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = stmpe_reg_write(stmpe, STMPE_KPC_ROW_LSB, keypad->rows);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (variant->max_rows > 8) {
|
|
ret = stmpe_set_bits(stmpe, STMPE_KPC_ROW_MSB,
|
|
STMPE_KPC_ROW_MSB_ROWS,
|
|
keypad->rows >> 8);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
ret = stmpe_set_bits(stmpe, STMPE_KPC_CTRL_MSB,
|
|
STMPE_KPC_CTRL_MSB_SCAN_COUNT,
|
|
keypad->scan_count << 4);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return stmpe_set_bits(stmpe, STMPE_KPC_CTRL_LSB,
|
|
STMPE_KPC_CTRL_LSB_SCAN |
|
|
STMPE_KPC_CTRL_LSB_DEBOUNCE,
|
|
STMPE_KPC_CTRL_LSB_SCAN |
|
|
(keypad->debounce_ms << 1));
|
|
}
|
|
|
|
static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad,
|
|
u32 used_rows, u32 used_cols)
|
|
{
|
|
int row, col;
|
|
|
|
for (row = 0; row < used_rows; row++) {
|
|
for (col = 0; col < used_cols; col++) {
|
|
int code = MATRIX_SCAN_CODE(row, col,
|
|
STMPE_KEYPAD_ROW_SHIFT);
|
|
if (keypad->keymap[code] != KEY_RESERVED) {
|
|
keypad->rows |= 1 << row;
|
|
keypad->cols |= 1 << col;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static int stmpe_keypad_probe(struct platform_device *pdev)
|
|
{
|
|
struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct stmpe_keypad *keypad;
|
|
struct input_dev *input;
|
|
u32 rows;
|
|
u32 cols;
|
|
int error;
|
|
int irq;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
keypad = devm_kzalloc(&pdev->dev, sizeof(struct stmpe_keypad),
|
|
GFP_KERNEL);
|
|
if (!keypad)
|
|
return -ENOMEM;
|
|
|
|
keypad->stmpe = stmpe;
|
|
keypad->variant = &stmpe_keypad_variants[stmpe->partnum];
|
|
|
|
of_property_read_u32(np, "debounce-interval", &keypad->debounce_ms);
|
|
of_property_read_u32(np, "st,scan-count", &keypad->scan_count);
|
|
keypad->no_autorepeat = of_property_read_bool(np, "st,no-autorepeat");
|
|
|
|
input = devm_input_allocate_device(&pdev->dev);
|
|
if (!input)
|
|
return -ENOMEM;
|
|
|
|
input->name = "STMPE keypad";
|
|
input->id.bustype = BUS_I2C;
|
|
input->dev.parent = &pdev->dev;
|
|
|
|
error = matrix_keypad_parse_of_params(&pdev->dev, &rows, &cols);
|
|
if (error)
|
|
return error;
|
|
|
|
error = matrix_keypad_build_keymap(NULL, NULL, rows, cols,
|
|
keypad->keymap, input);
|
|
if (error)
|
|
return error;
|
|
|
|
input_set_capability(input, EV_MSC, MSC_SCAN);
|
|
if (!keypad->no_autorepeat)
|
|
__set_bit(EV_REP, input->evbit);
|
|
|
|
stmpe_keypad_fill_used_pins(keypad, rows, cols);
|
|
|
|
keypad->input = input;
|
|
|
|
error = stmpe_keypad_chip_init(keypad);
|
|
if (error < 0)
|
|
return error;
|
|
|
|
error = devm_request_threaded_irq(&pdev->dev, irq,
|
|
NULL, stmpe_keypad_irq,
|
|
IRQF_ONESHOT, "stmpe-keypad", keypad);
|
|
if (error) {
|
|
dev_err(&pdev->dev, "unable to get irq: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
error = input_register_device(input);
|
|
if (error) {
|
|
dev_err(&pdev->dev,
|
|
"unable to register input device: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, keypad);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stmpe_keypad_remove(struct platform_device *pdev)
|
|
{
|
|
struct stmpe_keypad *keypad = platform_get_drvdata(pdev);
|
|
|
|
stmpe_disable(keypad->stmpe, STMPE_BLOCK_KEYPAD);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver stmpe_keypad_driver = {
|
|
.driver.name = "stmpe-keypad",
|
|
.driver.owner = THIS_MODULE,
|
|
.probe = stmpe_keypad_probe,
|
|
.remove = stmpe_keypad_remove,
|
|
};
|
|
module_platform_driver(stmpe_keypad_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("STMPExxxx keypad driver");
|
|
MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>");
|