AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-20 14:57:39 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
226746fd12
linux_dsm_epyc7002/drivers/regulator/rk808-regulator.c
Thomas Gleixner 2025cf9e19 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288 
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 as published by the free software foundation this program
  is distributed in the hope it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 263 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:36:37 +02:00

803 lines
24 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Regulator driver for Rockchip RK805/RK808/RK818
*
* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
*
* Author: Chris Zhong <zyw@rock-chips.com>
* Author: Zhang Qing <zhangqing@rock-chips.com>
*
* Copyright (C) 2016 PHYTEC Messtechnik GmbH
*
* Author: Wadim Egorov <w.egorov@phytec.de>
*/
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/mfd/rk808.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/of_regulator.h>
#include <linux/gpio/consumer.h>
/* Field Definitions */
#define RK808_BUCK_VSEL_MASK 0x3f
#define RK808_BUCK4_VSEL_MASK 0xf
#define RK808_LDO_VSEL_MASK 0x1f
#define RK818_BUCK_VSEL_MASK 0x3f
#define RK818_BUCK4_VSEL_MASK 0x1f
#define RK818_LDO_VSEL_MASK 0x1f
#define RK818_LDO3_ON_VSEL_MASK 0xf
#define RK818_BOOST_ON_VSEL_MASK 0xe0
/* Ramp rate definitions for buck1 / buck2 only */
#define RK808_RAMP_RATE_OFFSET 3
#define RK808_RAMP_RATE_MASK (3 << RK808_RAMP_RATE_OFFSET)
#define RK808_RAMP_RATE_2MV_PER_US (0 << RK808_RAMP_RATE_OFFSET)
#define RK808_RAMP_RATE_4MV_PER_US (1 << RK808_RAMP_RATE_OFFSET)
#define RK808_RAMP_RATE_6MV_PER_US (2 << RK808_RAMP_RATE_OFFSET)
#define RK808_RAMP_RATE_10MV_PER_US (3 << RK808_RAMP_RATE_OFFSET)
#define RK808_DVS2_POL BIT(2)
#define RK808_DVS1_POL BIT(1)
/* Offset from XXX_ON_VSEL to XXX_SLP_VSEL */
#define RK808_SLP_REG_OFFSET 1
/* Offset from XXX_ON_VSEL to XXX_DVS_VSEL */
#define RK808_DVS_REG_OFFSET 2
/* Offset from XXX_EN_REG to SLEEP_SET_OFF_XXX */
#define RK808_SLP_SET_OFF_REG_OFFSET 2
/* max steps for increase voltage of Buck1/2, equal 100mv*/
#define MAX_STEPS_ONE_TIME 8
#define RK805_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, _etime) \
[_id] = { \
.name = (_match), \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
.id = (_id), \
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
.owner = THIS_MODULE, \
.min_uV = (_min) * 1000, \
.uV_step = (_step) * 1000, \
.vsel_reg = (_vreg), \
.vsel_mask = (_vmask), \
.enable_reg = (_ereg), \
.enable_mask = (_emask), \
.enable_time = (_etime), \
.ops = &rk805_reg_ops, \
}
#define RK8XX_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, _etime) \
[_id] = { \
.name = (_match), \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
.id = (_id), \
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
.owner = THIS_MODULE, \
.min_uV = (_min) * 1000, \
.uV_step = (_step) * 1000, \
.vsel_reg = (_vreg), \
.vsel_mask = (_vmask), \
.enable_reg = (_ereg), \
.enable_mask = (_emask), \
.enable_time = (_etime), \
.ops = &rk808_reg_ops, \
}
#define RK8XX_DESC_SWITCH(_id, _match, _supply, _ereg, _emask) \
[_id] = { \
.name = (_match), \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
.id = (_id), \
.enable_reg = (_ereg), \
.enable_mask = (_emask), \
.owner = THIS_MODULE, \
.ops = &rk808_switch_ops \
}
struct rk808_regulator_data {
struct gpio_desc *dvs_gpio[2];
};
static const int rk808_buck_config_regs[] = {
RK808_BUCK1_CONFIG_REG,
RK808_BUCK2_CONFIG_REG,
RK808_BUCK3_CONFIG_REG,
RK808_BUCK4_CONFIG_REG,
};
static const struct regulator_linear_range rk808_ldo3_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000),
REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0),
};
static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
{
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
int id = rdev_get_id(rdev);
struct gpio_desc *gpio = pdata->dvs_gpio[id];
unsigned int val;
int ret;
if (!gpio || gpiod_get_value(gpio) == 0)
return regulator_get_voltage_sel_regmap(rdev);
ret = regmap_read(rdev->regmap,
rdev->desc->vsel_reg + RK808_DVS_REG_OFFSET,
&val);
if (ret != 0)
return ret;
val &= rdev->desc->vsel_mask;
val >>= ffs(rdev->desc->vsel_mask) - 1;
return val;
}
static int rk808_buck1_2_i2c_set_voltage_sel(struct regulator_dev *rdev,
unsigned sel)
{
int ret, delta_sel;
unsigned int old_sel, tmp, val, mask = rdev->desc->vsel_mask;
ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
if (ret != 0)
return ret;
tmp = val & ~mask;
old_sel = val & mask;
old_sel >>= ffs(mask) - 1;
delta_sel = sel - old_sel;
/*
* If directly modify the register to change the voltage, we will face
* the risk of overshoot. Put it into a multi-step, can effectively
* avoid this problem, a step is 100mv here.
*/
while (delta_sel > MAX_STEPS_ONE_TIME) {
old_sel += MAX_STEPS_ONE_TIME;
val = old_sel << (ffs(mask) - 1);
val |= tmp;
/*
* i2c is 400kHz (2.5us per bit) and we must transmit _at least_
* 3 bytes (24 bits) plus start and stop so 26 bits. So we've
* got more than 65 us between each voltage change and thus
* won't ramp faster than ~1500 uV / us.
*/
ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val);
delta_sel = sel - old_sel;
}
sel <<= ffs(mask) - 1;
val = tmp | sel;
ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val);
/*
* When we change the voltage register directly, the ramp rate is about
* 100000uv/us, wait 1us to make sure the target voltage to be stable,
* so we needn't wait extra time after that.
*/
udelay(1);
return ret;
}
static int rk808_buck1_2_set_voltage_sel(struct regulator_dev *rdev,
unsigned sel)
{
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
int id = rdev_get_id(rdev);
struct gpio_desc *gpio = pdata->dvs_gpio[id];
unsigned int reg = rdev->desc->vsel_reg;
unsigned old_sel;
int ret, gpio_level;
if (!gpio)
return rk808_buck1_2_i2c_set_voltage_sel(rdev, sel);
gpio_level = gpiod_get_value(gpio);
if (gpio_level == 0) {
reg += RK808_DVS_REG_OFFSET;
ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &old_sel);
} else {
ret = regmap_read(rdev->regmap,
reg + RK808_DVS_REG_OFFSET,
&old_sel);
}
if (ret != 0)
return ret;
sel <<= ffs(rdev->desc->vsel_mask) - 1;
sel |= old_sel & ~rdev->desc->vsel_mask;
ret = regmap_write(rdev->regmap, reg, sel);
if (ret)
return ret;
gpiod_set_value(gpio, !gpio_level);
return ret;
}
static int rk808_buck1_2_set_voltage_time_sel(struct regulator_dev *rdev,
unsigned int old_selector,
unsigned int new_selector)
{
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
int id = rdev_get_id(rdev);
struct gpio_desc *gpio = pdata->dvs_gpio[id];
/* if there is no dvs1/2 pin, we don't need wait extra time here. */
if (!gpio)
return 0;
return regulator_set_voltage_time_sel(rdev, old_selector, new_selector);
}
static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
{
unsigned int ramp_value = RK808_RAMP_RATE_10MV_PER_US;
unsigned int reg = rk808_buck_config_regs[rdev_get_id(rdev)];
switch (ramp_delay) {
case 1 ... 2000:
ramp_value = RK808_RAMP_RATE_2MV_PER_US;
break;
case 2001 ... 4000:
ramp_value = RK808_RAMP_RATE_4MV_PER_US;
break;
case 4001 ... 6000:
ramp_value = RK808_RAMP_RATE_6MV_PER_US;
break;
case 6001 ... 10000:
break;
default:
pr_warn("%s ramp_delay: %d not supported, setting 10000\n",
rdev->desc->name, ramp_delay);
}
return regmap_update_bits(rdev->regmap, reg,
RK808_RAMP_RATE_MASK, ramp_value);
}
static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
{
unsigned int reg;
int sel = regulator_map_voltage_linear(rdev, uv, uv);
if (sel < 0)
return -EINVAL;
reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
return regmap_update_bits(rdev->regmap, reg,
rdev->desc->vsel_mask,
sel);
}
static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv)
{
unsigned int reg;
int sel = regulator_map_voltage_linear_range(rdev, uv, uv);
if (sel < 0)
return -EINVAL;
reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
return regmap_update_bits(rdev->regmap, reg,
rdev->desc->vsel_mask,
sel);
}
static int rk805_set_suspend_enable(struct regulator_dev *rdev)
{
unsigned int reg;
reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
return regmap_update_bits(rdev->regmap, reg,
rdev->desc->enable_mask,
rdev->desc->enable_mask);
}
static int rk805_set_suspend_disable(struct regulator_dev *rdev)
{
unsigned int reg;
reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
return regmap_update_bits(rdev->regmap, reg,
rdev->desc->enable_mask,
0);
}
static int rk808_set_suspend_enable(struct regulator_dev *rdev)
{
unsigned int reg;
reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
return regmap_update_bits(rdev->regmap, reg,
rdev->desc->enable_mask,
0);
}
static int rk808_set_suspend_disable(struct regulator_dev *rdev)
{
unsigned int reg;
reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
return regmap_update_bits(rdev->regmap, reg,
rdev->desc->enable_mask,
rdev->desc->enable_mask);
}
static const struct regulator_ops rk805_reg_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_suspend_voltage = rk808_set_suspend_voltage,
.set_suspend_enable = rk805_set_suspend_enable,
.set_suspend_disable = rk805_set_suspend_disable,
};
static const struct regulator_ops rk805_switch_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_suspend_enable = rk805_set_suspend_enable,
.set_suspend_disable = rk805_set_suspend_disable,
};
static const struct regulator_ops rk808_buck1_2_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = rk808_buck1_2_get_voltage_sel_regmap,
.set_voltage_sel = rk808_buck1_2_set_voltage_sel,
.set_voltage_time_sel = rk808_buck1_2_set_voltage_time_sel,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_ramp_delay = rk808_set_ramp_delay,
.set_suspend_voltage = rk808_set_suspend_voltage,
.set_suspend_enable = rk808_set_suspend_enable,
.set_suspend_disable = rk808_set_suspend_disable,
};
static const struct regulator_ops rk808_reg_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_suspend_voltage = rk808_set_suspend_voltage,
.set_suspend_enable = rk808_set_suspend_enable,
.set_suspend_disable = rk808_set_suspend_disable,
};
static const struct regulator_ops rk808_reg_ops_ranges = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_suspend_voltage = rk808_set_suspend_voltage_range,
.set_suspend_enable = rk808_set_suspend_enable,
.set_suspend_disable = rk808_set_suspend_disable,
};
static const struct regulator_ops rk808_switch_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_suspend_enable = rk808_set_suspend_enable,
.set_suspend_disable = rk808_set_suspend_disable,
};
static const struct regulator_linear_range rk805_buck_1_2_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(712500, 0, 59, 12500),
REGULATOR_LINEAR_RANGE(1800000, 60, 62, 200000),
REGULATOR_LINEAR_RANGE(2300000, 63, 63, 0),
};
static const struct regulator_desc rk805_reg[] = {
{
.name = "DCDC_REG1",
.supply_name = "vcc1",
.of_match = of_match_ptr("DCDC_REG1"),
.regulators_node = of_match_ptr("regulators"),
.id = RK805_ID_DCDC1,
.ops = &rk808_reg_ops_ranges,
.type = REGULATOR_VOLTAGE,
.n_voltages = 64,
.linear_ranges = rk805_buck_1_2_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk805_buck_1_2_voltage_ranges),
.vsel_reg = RK805_BUCK1_ON_VSEL_REG,
.vsel_mask = RK818_BUCK_VSEL_MASK,
.enable_reg = RK805_DCDC_EN_REG,
.enable_mask = BIT(0),
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG2",
.supply_name = "vcc2",
.of_match = of_match_ptr("DCDC_REG2"),
.regulators_node = of_match_ptr("regulators"),
.id = RK805_ID_DCDC2,
.ops = &rk808_reg_ops_ranges,
.type = REGULATOR_VOLTAGE,
.n_voltages = 64,
.linear_ranges = rk805_buck_1_2_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk805_buck_1_2_voltage_ranges),
.vsel_reg = RK805_BUCK2_ON_VSEL_REG,
.vsel_mask = RK818_BUCK_VSEL_MASK,
.enable_reg = RK805_DCDC_EN_REG,
.enable_mask = BIT(1),
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG3",
.supply_name = "vcc3",
.of_match = of_match_ptr("DCDC_REG3"),
.regulators_node = of_match_ptr("regulators"),
.id = RK805_ID_DCDC3,
.ops = &rk805_switch_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = 1,
.enable_reg = RK805_DCDC_EN_REG,
.enable_mask = BIT(2),
.owner = THIS_MODULE,
},
RK805_DESC(RK805_ID_DCDC4, "DCDC_REG4", "vcc4", 800, 3400, 100,
RK805_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK,
RK805_DCDC_EN_REG, BIT(3), 0),
RK805_DESC(RK805_ID_LDO1, "LDO_REG1", "vcc5", 800, 3400, 100,
RK805_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
BIT(0), 400),
RK805_DESC(RK805_ID_LDO2, "LDO_REG2", "vcc5", 800, 3400, 100,
RK805_LDO2_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
BIT(1), 400),
RK805_DESC(RK805_ID_LDO3, "LDO_REG3", "vcc6", 800, 3400, 100,
RK805_LDO3_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
BIT(2), 400),
};
static const struct regulator_desc rk808_reg[] = {
{
.name = "DCDC_REG1",
.supply_name = "vcc1",
.of_match = of_match_ptr("DCDC_REG1"),
.regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC1,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
.min_uV = 712500,
.uV_step = 12500,
.n_voltages = 64,
.vsel_reg = RK808_BUCK1_ON_VSEL_REG,
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
.enable_mask = BIT(0),
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG2",
.supply_name = "vcc2",
.of_match = of_match_ptr("DCDC_REG2"),
.regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC2,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
.min_uV = 712500,
.uV_step = 12500,
.n_voltages = 64,
.vsel_reg = RK808_BUCK2_ON_VSEL_REG,
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
.enable_mask = BIT(1),
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG3",
.supply_name = "vcc3",
.of_match = of_match_ptr("DCDC_REG3"),
.regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC3,
.ops = &rk808_switch_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = 1,
.enable_reg = RK808_DCDC_EN_REG,
.enable_mask = BIT(2),
.owner = THIS_MODULE,
},
RK8XX_DESC(RK808_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3300, 100,
RK808_BUCK4_ON_VSEL_REG, RK808_BUCK4_VSEL_MASK,
RK808_DCDC_EN_REG, BIT(3), 0),
RK8XX_DESC(RK808_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
RK808_LDO1_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
BIT(0), 400),
RK8XX_DESC(RK808_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
RK808_LDO2_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
BIT(1), 400),
{
.name = "LDO_REG3",
.supply_name = "vcc7",
.of_match = of_match_ptr("LDO_REG3"),
.regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_LDO3,
.ops = &rk808_reg_ops_ranges,
.type = REGULATOR_VOLTAGE,
.n_voltages = 16,
.linear_ranges = rk808_ldo3_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges),
.vsel_reg = RK808_LDO3_ON_VSEL_REG,
.vsel_mask = RK808_BUCK4_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
.enable_mask = BIT(2),
.enable_time = 400,
.owner = THIS_MODULE,
},
RK8XX_DESC(RK808_ID_LDO4, "LDO_REG4", "vcc9", 1800, 3400, 100,
RK808_LDO4_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
BIT(3), 400),
RK8XX_DESC(RK808_ID_LDO5, "LDO_REG5", "vcc9", 1800, 3400, 100,
RK808_LDO5_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
BIT(4), 400),
RK8XX_DESC(RK808_ID_LDO6, "LDO_REG6", "vcc10", 800, 2500, 100,
RK808_LDO6_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
BIT(5), 400),
RK8XX_DESC(RK808_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
RK808_LDO7_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
BIT(6), 400),
RK8XX_DESC(RK808_ID_LDO8, "LDO_REG8", "vcc11", 1800, 3400, 100,
RK808_LDO8_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
BIT(7), 400),
RK8XX_DESC_SWITCH(RK808_ID_SWITCH1, "SWITCH_REG1", "vcc8",
RK808_DCDC_EN_REG, BIT(5)),
RK8XX_DESC_SWITCH(RK808_ID_SWITCH2, "SWITCH_REG2", "vcc12",
RK808_DCDC_EN_REG, BIT(6)),
};
static const struct regulator_desc rk818_reg[] = {
{
.name = "DCDC_REG1",
.supply_name = "vcc1",
.of_match = of_match_ptr("DCDC_REG1"),
.regulators_node = of_match_ptr("regulators"),
.id = RK818_ID_DCDC1,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
.min_uV = 712500,
.uV_step = 12500,
.n_voltages = 64,
.vsel_reg = RK818_BUCK1_ON_VSEL_REG,
.vsel_mask = RK818_BUCK_VSEL_MASK,
.enable_reg = RK818_DCDC_EN_REG,
.enable_mask = BIT(0),
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG2",
.supply_name = "vcc2",
.of_match = of_match_ptr("DCDC_REG2"),
.regulators_node = of_match_ptr("regulators"),
.id = RK818_ID_DCDC2,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
.min_uV = 712500,
.uV_step = 12500,
.n_voltages = 64,
.vsel_reg = RK818_BUCK2_ON_VSEL_REG,
.vsel_mask = RK818_BUCK_VSEL_MASK,
.enable_reg = RK818_DCDC_EN_REG,
.enable_mask = BIT(1),
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG3",
.supply_name = "vcc3",
.of_match = of_match_ptr("DCDC_REG3"),
.regulators_node = of_match_ptr("regulators"),
.id = RK818_ID_DCDC3,
.ops = &rk808_switch_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = 1,
.enable_reg = RK818_DCDC_EN_REG,
.enable_mask = BIT(2),
.owner = THIS_MODULE,
},
RK8XX_DESC(RK818_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3600, 100,
RK818_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK,
RK818_DCDC_EN_REG, BIT(3), 0),
RK8XX_DESC(RK818_ID_BOOST, "DCDC_BOOST", "boost", 4700, 5400, 100,
RK818_BOOST_LDO9_ON_VSEL_REG, RK818_BOOST_ON_VSEL_MASK,
RK818_DCDC_EN_REG, BIT(4), 0),
RK8XX_DESC(RK818_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(0), 400),
RK8XX_DESC(RK818_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
RK818_LDO2_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(1), 400),
{
.name = "LDO_REG3",
.supply_name = "vcc7",
.of_match = of_match_ptr("LDO_REG3"),
.regulators_node = of_match_ptr("regulators"),
.id = RK818_ID_LDO3,
.ops = &rk808_reg_ops_ranges,
.type = REGULATOR_VOLTAGE,
.n_voltages = 16,
.linear_ranges = rk808_ldo3_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges),
.vsel_reg = RK818_LDO3_ON_VSEL_REG,
.vsel_mask = RK818_LDO3_ON_VSEL_MASK,
.enable_reg = RK818_LDO_EN_REG,
.enable_mask = BIT(2),
.enable_time = 400,
.owner = THIS_MODULE,
},
RK8XX_DESC(RK818_ID_LDO4, "LDO_REG4", "vcc8", 1800, 3400, 100,
RK818_LDO4_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(3), 400),
RK8XX_DESC(RK818_ID_LDO5, "LDO_REG5", "vcc7", 1800, 3400, 100,
RK818_LDO5_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(4), 400),
RK8XX_DESC(RK818_ID_LDO6, "LDO_REG6", "vcc8", 800, 2500, 100,
RK818_LDO6_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(5), 400),
RK8XX_DESC(RK818_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
RK818_LDO7_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(6), 400),
RK8XX_DESC(RK818_ID_LDO8, "LDO_REG8", "vcc8", 1800, 3400, 100,
RK818_LDO8_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(7), 400),
RK8XX_DESC(RK818_ID_LDO9, "LDO_REG9", "vcc9", 1800, 3400, 100,
RK818_BOOST_LDO9_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
RK818_DCDC_EN_REG, BIT(5), 400),
RK8XX_DESC_SWITCH(RK818_ID_SWITCH, "SWITCH_REG", "vcc9",
RK818_DCDC_EN_REG, BIT(6)),
RK8XX_DESC_SWITCH(RK818_ID_HDMI_SWITCH, "HDMI_SWITCH", "h_5v",
RK818_H5V_EN_REG, BIT(0)),
RK8XX_DESC_SWITCH(RK818_ID_OTG_SWITCH, "OTG_SWITCH", "usb",
RK818_DCDC_EN_REG, BIT(7)),
};
static int rk808_regulator_dt_parse_pdata(struct device *dev,
struct device *client_dev,
struct regmap *map,
struct rk808_regulator_data *pdata)
{
struct device_node *np;
int tmp, ret = 0, i;
np = of_get_child_by_name(client_dev->of_node, "regulators");
if (!np)
return -ENXIO;
for (i = 0; i < ARRAY_SIZE(pdata->dvs_gpio); i++) {
pdata->dvs_gpio[i] =
devm_gpiod_get_index_optional(client_dev, "dvs", i,
GPIOD_OUT_LOW);
if (IS_ERR(pdata->dvs_gpio[i])) {
ret = PTR_ERR(pdata->dvs_gpio[i]);
dev_err(dev, "failed to get dvs%d gpio (%d)\n", i, ret);
goto dt_parse_end;
}
if (!pdata->dvs_gpio[i]) {
dev_warn(dev, "there is no dvs%d gpio\n", i);
continue;
}
tmp = i ? RK808_DVS2_POL : RK808_DVS1_POL;
ret = regmap_update_bits(map, RK808_IO_POL_REG, tmp,
gpiod_is_active_low(pdata->dvs_gpio[i]) ?
0 : tmp);
}
dt_parse_end:
of_node_put(np);
return ret;
}
static int rk808_regulator_probe(struct platform_device *pdev)
{
struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
struct i2c_client *client = rk808->i2c;
struct regulator_config config = {};
struct regulator_dev *rk808_rdev;
struct rk808_regulator_data *pdata;
const struct regulator_desc *regulators;
int ret, i, nregulators;
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
ret = rk808_regulator_dt_parse_pdata(&pdev->dev, &client->dev,
rk808->regmap, pdata);
if (ret < 0)
return ret;
platform_set_drvdata(pdev, pdata);
switch (rk808->variant) {
case RK805_ID:
regulators = rk805_reg;
nregulators = RK805_NUM_REGULATORS;
break;
case RK808_ID:
regulators = rk808_reg;
nregulators = RK808_NUM_REGULATORS;
break;
case RK818_ID:
regulators = rk818_reg;
nregulators = RK818_NUM_REGULATORS;
break;
default:
dev_err(&client->dev, "unsupported RK8XX ID %lu\n",
rk808->variant);
return -EINVAL;
}
config.dev = &client->dev;
config.driver_data = pdata;
config.regmap = rk808->regmap;
/* Instantiate the regulators */
for (i = 0; i < nregulators; i++) {
rk808_rdev = devm_regulator_register(&pdev->dev,
&regulators[i], &config);
if (IS_ERR(rk808_rdev)) {
dev_err(&client->dev,
"failed to register %d regulator\n", i);
return PTR_ERR(rk808_rdev);
}
}
return 0;
}
static struct platform_driver rk808_regulator_driver = {
.probe = rk808_regulator_probe,
.driver = {
.name = "rk808-regulator"
},
};
module_platform_driver(rk808_regulator_driver);
MODULE_DESCRIPTION("regulator driver for the RK805/RK808/RK818 series PMICs");
MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:rk808-regulator");
Reference in New Issue View Git Blame Copy Permalink