mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 13:46:47 +07:00
422b06769e
All chips of i.mx6 can be powered off by programming SNVS. For example : On i.mx6q-sabresd board, PMIC_ON_REQ connect with external pmic ON/OFF pin, that will cause the whole PMIC powered off except VSNVS. And system can restart once PMIC_ON_REQ goes high by push POWRER key. Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
639 lines
16 KiB
Plaintext
639 lines
16 KiB
Plaintext
/*
|
|
* Copyright (C) 2014 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include "imx6sx.dtsi"
|
|
|
|
/ {
|
|
model = "Freescale i.MX6 SoloX SDB Board";
|
|
compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
|
|
|
|
chosen {
|
|
stdout-path = &uart1;
|
|
};
|
|
|
|
memory {
|
|
reg = <0x80000000 0x40000000>;
|
|
};
|
|
|
|
backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm3 0 5000000>;
|
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
|
default-brightness-level = <6>;
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpio_keys>;
|
|
|
|
volume-up {
|
|
label = "Volume Up";
|
|
gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
};
|
|
|
|
volume-down {
|
|
label = "Volume Down";
|
|
gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
};
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
vcc_sd3: regulator@0 {
|
|
compatible = "regulator-fixed";
|
|
reg = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_vcc_sd3>;
|
|
regulator-name = "VCC_SD3";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_usb_otg1_vbus: regulator@1 {
|
|
compatible = "regulator-fixed";
|
|
reg = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usb_otg1>;
|
|
regulator-name = "usb_otg1_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_usb_otg2_vbus: regulator@2 {
|
|
compatible = "regulator-fixed";
|
|
reg = <2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usb_otg2>;
|
|
regulator-name = "usb_otg2_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_psu_5v: regulator@3 {
|
|
compatible = "regulator-fixed";
|
|
reg = <3>;
|
|
regulator-name = "PSU-5V0";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
|
|
reg_lcd_3v3: regulator@4 {
|
|
compatible = "regulator-fixed";
|
|
reg = <4>;
|
|
regulator-name = "lcd-3v3";
|
|
gpio = <&gpio3 27 0>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_peri_3v3: regulator@5 {
|
|
compatible = "regulator-fixed";
|
|
reg = <5>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_peri_3v3>;
|
|
regulator-name = "peri_3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_enet_3v3: regulator@6 {
|
|
compatible = "regulator-fixed";
|
|
reg = <6>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet_3v3>;
|
|
regulator-name = "enet_3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
sound {
|
|
compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
|
|
model = "wm8962-audio";
|
|
ssi-controller = <&ssi2>;
|
|
audio-codec = <&codec>;
|
|
audio-routing =
|
|
"Headphone Jack", "HPOUTL",
|
|
"Headphone Jack", "HPOUTR",
|
|
"Ext Spk", "SPKOUTL",
|
|
"Ext Spk", "SPKOUTR",
|
|
"AMIC", "MICBIAS",
|
|
"IN3R", "AMIC";
|
|
mux-int-port = <2>;
|
|
mux-ext-port = <6>;
|
|
};
|
|
};
|
|
|
|
&audmux {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_audmux>;
|
|
status = "okay";
|
|
};
|
|
|
|
&fec1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet1>;
|
|
phy-supply = <®_enet_3v3>;
|
|
phy-mode = "rgmii";
|
|
status = "okay";
|
|
};
|
|
|
|
&fec2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet2>;
|
|
phy-mode = "rgmii";
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
status = "okay";
|
|
|
|
pmic: pfuze100@08 {
|
|
compatible = "fsl,pfuze100";
|
|
reg = <0x08>;
|
|
|
|
regulators {
|
|
sw1a_reg: sw1ab {
|
|
regulator-min-microvolt = <300000>;
|
|
regulator-max-microvolt = <1875000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <6250>;
|
|
};
|
|
|
|
sw1c_reg: sw1c {
|
|
regulator-min-microvolt = <300000>;
|
|
regulator-max-microvolt = <1875000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <6250>;
|
|
};
|
|
|
|
sw2_reg: sw2 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw3a_reg: sw3a {
|
|
regulator-min-microvolt = <400000>;
|
|
regulator-max-microvolt = <1975000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw3b_reg: sw3b {
|
|
regulator-min-microvolt = <400000>;
|
|
regulator-max-microvolt = <1975000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw4_reg: sw4 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
swbst_reg: swbst {
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5150000>;
|
|
};
|
|
|
|
snvs_reg: vsnvs {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vref_reg: vrefddr {
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen1_reg: vgen1 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1550000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen2_reg: vgen2 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1550000>;
|
|
};
|
|
|
|
vgen3_reg: vgen3 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen4_reg: vgen4 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen5_reg: vgen5 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen6_reg: vgen6 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c4 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c4>;
|
|
status = "okay";
|
|
|
|
codec: wm8962@1a {
|
|
compatible = "wlf,wm8962";
|
|
reg = <0x1a>;
|
|
clocks = <&clks IMX6SX_CLK_AUDIO>;
|
|
DCVDD-supply = <&vgen4_reg>;
|
|
DBVDD-supply = <&vgen4_reg>;
|
|
AVDD-supply = <&vgen4_reg>;
|
|
CPVDD-supply = <&vgen4_reg>;
|
|
MICVDD-supply = <&vgen3_reg>;
|
|
PLLVDD-supply = <&vgen4_reg>;
|
|
SPKVDD1-supply = <®_psu_5v>;
|
|
SPKVDD2-supply = <®_psu_5v>;
|
|
};
|
|
};
|
|
|
|
&lcdif1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_lcd>;
|
|
lcd-supply = <®_lcd_3v3>;
|
|
display = <&display0>;
|
|
status = "okay";
|
|
|
|
display0: display0 {
|
|
bits-per-pixel = <16>;
|
|
bus-width = <24>;
|
|
|
|
display-timings {
|
|
native-mode = <&timing0>;
|
|
timing0: timing0 {
|
|
clock-frequency = <33500000>;
|
|
hactive = <800>;
|
|
vactive = <480>;
|
|
hback-porch = <89>;
|
|
hfront-porch = <164>;
|
|
vback-porch = <23>;
|
|
vfront-porch = <10>;
|
|
hsync-len = <10>;
|
|
vsync-len = <10>;
|
|
hsync-active = <0>;
|
|
vsync-active = <0>;
|
|
de-active = <1>;
|
|
pixelclk-active = <0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&snvs_poweroff {
|
|
status = "okay";
|
|
};
|
|
|
|
&ssi2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart5 { /* for bluetooth */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart5>;
|
|
fsl,uart-has-rtscts;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg1 {
|
|
vbus-supply = <®_usb_otg1_vbus>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usb_otg1_id>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg2 {
|
|
vbus-supply = <®_usb_otg2_vbus>;
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc2>;
|
|
non-removable;
|
|
no-1-8-v;
|
|
keep-power-in-suspend;
|
|
enable-sdio-wakeup;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc3 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
|
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
|
|
bus-width = <8>;
|
|
cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
|
|
wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
|
|
keep-power-in-suspend;
|
|
enable-sdio-wakeup;
|
|
vmmc-supply = <&vcc_sd3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc4>;
|
|
cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
|
|
wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
imx6x-sdb {
|
|
pinctrl_audmux: audmuxgrp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC 0x130b0
|
|
MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS 0x130b0
|
|
MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x120b0
|
|
MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x130b0
|
|
MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_enet1: enet1grp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1
|
|
MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1
|
|
MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b1
|
|
MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1
|
|
MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1
|
|
MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1
|
|
MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1
|
|
MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1
|
|
MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081
|
|
MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081
|
|
MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081
|
|
MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081
|
|
MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081
|
|
MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081
|
|
MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91
|
|
>;
|
|
};
|
|
|
|
pinctrl_enet_3v3: enet3v3grp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x80000000
|
|
>;
|
|
};
|
|
|
|
pinctrl_enet2: enet2grp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9
|
|
MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1
|
|
MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1
|
|
MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1
|
|
MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1
|
|
MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1
|
|
MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081
|
|
MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081
|
|
MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081
|
|
MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081
|
|
MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081
|
|
MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpio_keys: gpio_keysgrp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
|
|
MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1
|
|
MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c4: i2c4grp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x4001b8b1
|
|
MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_lcd: lcdgrp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
|
|
MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
|
|
MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
|
|
MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
|
|
MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
|
|
MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
|
|
MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
|
|
MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
|
|
MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
|
|
MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
|
|
MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
|
|
MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
|
|
MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
|
|
MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
|
|
MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
|
|
MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
|
|
MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
|
|
MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
|
|
MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
|
|
MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
|
|
MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
|
|
MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
|
|
MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
|
|
MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
|
|
MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0
|
|
MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
|
|
MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
|
|
MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
|
|
MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_peri_3v3: peri3v3grp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm3: pwm3grp-1 {
|
|
fsl,pins = <
|
|
MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_vcc_sd3: vccsd3grp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
|
|
MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart5: uart5grp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1
|
|
MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1
|
|
MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x1b0b1
|
|
MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usb_otg1: usbotg1grp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usb_otg1_id: usbotg1idgrp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usb_otg2: usbot2ggrp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12 0x10b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2: usdhc2grp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059
|
|
MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059
|
|
MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059
|
|
MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059
|
|
MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059
|
|
MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3: usdhc3grp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059
|
|
MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059
|
|
MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059
|
|
MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059
|
|
MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059
|
|
MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059
|
|
MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059
|
|
MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059
|
|
MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059
|
|
MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059
|
|
MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */
|
|
MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
|
|
fsl,pins = <
|
|
MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9
|
|
MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9
|
|
MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9
|
|
MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9
|
|
MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9
|
|
MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9
|
|
MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9
|
|
MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9
|
|
MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9
|
|
MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
|
|
fsl,pins = <
|
|
MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9
|
|
MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9
|
|
MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9
|
|
MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9
|
|
MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9
|
|
MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9
|
|
MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9
|
|
MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9
|
|
MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9
|
|
MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc4: usdhc4grp {
|
|
fsl,pins = <
|
|
MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059
|
|
MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059
|
|
MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059
|
|
MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059
|
|
MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059
|
|
MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059
|
|
MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */
|
|
MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */
|
|
>;
|
|
};
|
|
};
|
|
};
|