linux_dsm_epyc7002/arch/powerpc/mm/8xx_mmu.c
Christophe Leroy 4386c096c2 powerpc/mm: Rename map_page() to map_kernel_page() on 32-bit
These two functions implement the same semantics, so unify their naming so we
can share code that calls them. The longer name is more descriptive so use it.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-05 19:59:03 +10:00

191 lines
4.7 KiB
C

/*
* This file contains the routines for initializing the MMU
* on the 8xx series of chips.
* -- christophe
*
* Derived from arch/powerpc/mm/40x_mmu.c:
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#include <linux/memblock.h>
#include <asm/fixmap.h>
#include <asm/code-patching.h>
#include "mmu_decl.h"
#define IMMR_SIZE (FIX_IMMR_SIZE << PAGE_SHIFT)
extern int __map_without_ltlbs;
/*
* Return PA for this VA if it is in IMMR area, or 0
*/
phys_addr_t v_block_mapped(unsigned long va)
{
unsigned long p = PHYS_IMMR_BASE;
if (__map_without_ltlbs)
return 0;
if (va >= VIRT_IMMR_BASE && va < VIRT_IMMR_BASE + IMMR_SIZE)
return p + va - VIRT_IMMR_BASE;
return 0;
}
/*
* Return VA for a given PA or 0 if not mapped
*/
unsigned long p_block_mapped(phys_addr_t pa)
{
unsigned long p = PHYS_IMMR_BASE;
if (__map_without_ltlbs)
return 0;
if (pa >= p && pa < p + IMMR_SIZE)
return VIRT_IMMR_BASE + pa - p;
return 0;
}
#define LARGE_PAGE_SIZE_8M (1<<23)
/*
* MMU_init_hw does the chip-specific initialization of the MMU hardware.
*/
void __init MMU_init_hw(void)
{
/* PIN up to the 3 first 8Mb after IMMR in DTLB table */
#ifdef CONFIG_PIN_TLB
unsigned long ctr = mfspr(SPRN_MD_CTR) & 0xfe000000;
unsigned long flags = 0xf0 | MD_SPS16K | _PAGE_SHARED | _PAGE_DIRTY;
#ifdef CONFIG_PIN_TLB_IMMR
int i = 29;
#else
int i = 28;
#endif
unsigned long addr = 0;
unsigned long mem = total_lowmem;
for (; i < 32 && mem >= LARGE_PAGE_SIZE_8M; i++) {
mtspr(SPRN_MD_CTR, ctr | (i << 8));
mtspr(SPRN_MD_EPN, (unsigned long)__va(addr) | MD_EVALID);
mtspr(SPRN_MD_TWC, MD_PS8MEG | MD_SVALID);
mtspr(SPRN_MD_RPN, addr | flags | _PAGE_PRESENT);
addr += LARGE_PAGE_SIZE_8M;
mem -= LARGE_PAGE_SIZE_8M;
}
#endif
}
static void mmu_mapin_immr(void)
{
unsigned long p = PHYS_IMMR_BASE;
unsigned long v = VIRT_IMMR_BASE;
unsigned long f = pgprot_val(PAGE_KERNEL_NCG);
int offset;
for (offset = 0; offset < IMMR_SIZE; offset += PAGE_SIZE)
map_kernel_page(v + offset, p + offset, f);
}
/* Address of instructions to patch */
#ifndef CONFIG_PIN_TLB_IMMR
extern unsigned int DTLBMiss_jmp;
#endif
extern unsigned int DTLBMiss_cmp, FixupDAR_cmp;
void mmu_patch_cmp_limit(unsigned int *addr, unsigned long mapped)
{
unsigned int instr = *addr;
instr &= 0xffff0000;
instr |= (unsigned long)__va(mapped) >> 16;
patch_instruction(addr, instr);
}
unsigned long __init mmu_mapin_ram(unsigned long top)
{
unsigned long mapped;
if (__map_without_ltlbs) {
mapped = 0;
mmu_mapin_immr();
#ifndef CONFIG_PIN_TLB_IMMR
patch_instruction(&DTLBMiss_jmp, PPC_INST_NOP);
#endif
} else {
mapped = top & ~(LARGE_PAGE_SIZE_8M - 1);
}
mmu_patch_cmp_limit(&DTLBMiss_cmp, mapped);
mmu_patch_cmp_limit(&FixupDAR_cmp, mapped);
/* If the size of RAM is not an exact power of two, we may not
* have covered RAM in its entirety with 8 MiB
* pages. Consequently, restrict the top end of RAM currently
* allocable so that calls to the MEMBLOCK to allocate PTEs for "tail"
* coverage with normal-sized pages (or other reasons) do not
* attempt to allocate outside the allowed range.
*/
if (mapped)
memblock_set_current_limit(mapped);
return mapped;
}
void setup_initial_memory_limit(phys_addr_t first_memblock_base,
phys_addr_t first_memblock_size)
{
/* We don't currently support the first MEMBLOCK not mapping 0
* physical on those processors
*/
BUG_ON(first_memblock_base != 0);
/* 8xx can only access 24MB at the moment */
memblock_set_current_limit(min_t(u64, first_memblock_size, 0x01800000));
}
/*
* Set up to use a given MMU context.
* id is context number, pgd is PGD pointer.
*
* We place the physical address of the new task page directory loaded
* into the MMU base register, and set the ASID compare register with
* the new "context."
*/
void set_context(unsigned long id, pgd_t *pgd)
{
s16 offset = (s16)(__pa(swapper_pg_dir));
#ifdef CONFIG_BDI_SWITCH
pgd_t **ptr = *(pgd_t ***)(KERNELBASE + 0xf0);
/* Context switch the PTE pointer for the Abatron BDI2000.
* The PGDIR is passed as second argument.
*/
*(ptr + 1) = pgd;
#endif
/* Register M_TW will contain base address of level 1 table minus the
* lower part of the kernel PGDIR base address, so that all accesses to
* level 1 table are done relative to lower part of kernel PGDIR base
* address.
*/
mtspr(SPRN_M_TW, __pa(pgd) - offset);
/* Update context */
mtspr(SPRN_M_CASID, id);
/* sync */
mb();
}
void flush_instruction_cache(void)
{
isync();
mtspr(SPRN_IC_CST, IDC_INVALL);
isync();
}