linux_dsm_epyc7002/drivers/mtd/nand
Boris Brezillon 2165c4a1f7 mtd: nand: Support 'EXIT GET STATUS' command in nand_command[_lp]()
READ0 is sometimes used to exit GET STATUS mode. When this is the case
no address cycles are requested, and we can use this information to
detect that READSTART should not be issued after READ0 or that we
shouldn't wait for the chip to be ready.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-06-01 10:09:34 +02:00
..
atmel mtd: nand: Wait for PAGEPROG to finish in drivers setting NAND_ECC_CUSTOM_PAGE_ACCESS 2017-06-01 10:09:33 +02:00
bcm47xxnflash mtd: nand: Make sure drivers not supporting SET/GET_FEATURES return -ENOTSUPP 2017-05-30 08:59:26 +02:00
brcmnand mtd: nand: brcmnand: Check flash #WP pin status before nand erase/program 2017-04-25 14:18:42 +02:00
gpmi-nand mtd: nand: gpmi: Kill gpmi_nand_exit() 2017-06-01 10:09:27 +02:00
ams-delta.c mtd: nand: ams-delta: return error code of nand_scan() on error 2016-11-07 14:48:41 +01:00
au1550nd.c
bf5xx_nand.c mtd: nand: import nand_hw_control_init() 2016-09-23 09:35:16 +02:00
cafe_nand.c mtd: nand: Make sure drivers not supporting SET/GET_FEATURES return -ENOTSUPP 2017-05-30 08:59:26 +02:00
cmx270_nand.c drivers/mtd: Convert remaining uses of pr_warning to pr_warn 2017-04-19 13:10:54 -07:00
cs553x_nand.c mtd: nand: cs553x: return error code of nand_scan() on error 2016-11-07 14:48:42 +01:00
davinci_nand.c mtd: nand: davinci: set ECC algorithm explicitly for HW based ECC 2017-05-15 12:00:46 +02:00
denali_dt.c mtd: nand: denali: allow to override revision number 2017-04-25 14:18:37 +02:00
denali_pci.c mtd: nand: denali: remove unneeded <linux/slab.h> includes 2016-11-19 09:30:55 +01:00
denali.c mtd: nand: Make sure drivers not supporting SET/GET_FEATURES return -ENOTSUPP 2017-05-30 08:59:26 +02:00
denali.h mtd: nand: denali: allow to override revision number 2017-04-25 14:18:37 +02:00
diskonchip.c
docg4.c mtd: nand: Make sure drivers not supporting SET/GET_FEATURES return -ENOTSUPP 2017-05-30 08:59:26 +02:00
fsl_elbc_nand.c mtd: nand: Make sure drivers not supporting SET/GET_FEATURES return -ENOTSUPP 2017-05-30 08:59:26 +02:00
fsl_ifc_nand.c mtd: nand: Make sure drivers not supporting SET/GET_FEATURES return -ENOTSUPP 2017-05-30 08:59:26 +02:00
fsl_upm.c
fsmc_nand.c mtd: nand: Pass the CS line to ->setup_data_interface() 2017-06-01 10:09:28 +02:00
gpio.c mtd: nand: gpio: make nCE GPIO optional 2017-03-16 10:34:27 +01:00
hisi504_nand.c mtd: nand: Make sure drivers not supporting SET/GET_FEATURES return -ENOTSUPP 2017-05-30 08:59:26 +02:00
jz4740_nand.c
jz4780_bch.c mtd: nand: jz4780: Update MODULE_AUTHOR email address 2016-07-11 08:40:19 +02:00
jz4780_bch.h
jz4780_nand.c mtd: nand: jz4780: Use mtd_set_ooblayout() to set the ooblayout 2017-05-15 12:00:36 +02:00
Kconfig mtd: nand: atmel: Add ->setup_data_interface() hooks 2017-06-01 10:09:29 +02:00
lpc32xx_mlc.c mtd: nand: lpc32xx: fix invalid error handling of a requested irq 2017-01-04 20:50:18 +01:00
lpc32xx_slc.c mtd: nand: lpc32xx_slc: Remove unneeded NULL check on 'rc' 2017-01-30 11:50:30 +01:00
Makefile mtd: nand: Cleanup/rework the atmel_nand driver 2017-04-25 14:18:29 +02:00
mpc5121_nfc.c mtd: nand: Make sure drivers not supporting SET/GET_FEATURES return -ENOTSUPP 2017-05-30 08:59:26 +02:00
mtk_ecc.c mtd: mtk: avoid warning in mtk_ecc_encode 2016-10-28 10:21:23 +02:00
mtk_ecc.h mtd: mediatek: driver for MTK Smart Device 2016-07-11 08:39:54 +02:00
mtk_nand.c mtd: nand: mediatek: remove redundant dev_err call in mtk_nfc_probe() 2017-01-30 11:54:22 +01:00
mxc_nand.c mtd: nand: Pass the CS line to ->setup_data_interface() 2017-06-01 10:09:28 +02:00
nand_amd.c mtd: nand: Move AMD/Spansion specific init/detection logic in nand_amd.c 2017-03-08 23:21:22 +01:00
nand_base.c mtd: nand: Support 'EXIT GET STATUS' command in nand_command[_lp]() 2017-06-01 10:09:34 +02:00
nand_bbt.c mtd: nand_bbt: scan for next free bbt block if writing bbt fails 2016-09-23 09:35:16 +02:00
nand_bch.c
nand_ecc.c
nand_hynix.c mtd: nand: hynix: Fix an error code in init 2017-03-23 10:44:02 +01:00
nand_ids.c mtd: nand: Move Macronix specific initialization in nand_macronix.c 2017-03-08 23:21:23 +01:00
nand_macronix.c mtd: nand: Move Macronix specific initialization in nand_macronix.c 2017-03-08 23:21:23 +01:00
nand_micron.c mtd: nand: Wait for PAGEPROG to finish in drivers setting NAND_ECC_CUSTOM_PAGE_ACCESS 2017-06-01 10:09:33 +02:00
nand_samsung.c mtd: nand: samsung: Retrieve ECC requirements from extended ID 2017-03-08 23:21:23 +01:00
nand_timings.c mtd: nand: Add a few more timings to nand_sdr_timings 2016-11-07 14:48:37 +01:00
nand_toshiba.c mtd: nand: Move Toshiba specific init/detection logic in nand_toshiba.c 2017-03-08 23:21:21 +01:00
nandsim.c MTD updates for 4.12-rc1: 2017-05-11 10:44:22 -07:00
ndfc.c mtd: nand: import nand_hw_control_init() 2016-09-23 09:35:16 +02:00
nuc900_nand.c
omap2.c mtd: nand: omap2: Fix partition creation via cmdline mtdparts 2017-04-25 14:18:40 +02:00
omap_elm.c
orion_nand.c mtd: nand: orion: improve handling of optional clock 2017-03-29 17:05:37 +02:00
oxnas_nand.c mtd: oxnas_nand: Allocating more than necessary in probe() 2017-05-02 15:54:49 -07:00
pasemi_nand.c mtd: nand: pasemi: return error code of nand_scan() on error 2016-11-07 14:48:45 +01:00
plat_nand.c mtd: nand: plat_nand: return error code of nand_scan() on error 2016-11-07 14:48:45 +01:00
pxa3xx_nand.c mtd: nand: Make sure drivers not supporting SET/GET_FEATURES return -ENOTSUPP 2017-05-30 08:59:26 +02:00
qcom_nandc.c mtd: nand: Make sure drivers not supporting SET/GET_FEATURES return -ENOTSUPP 2017-05-30 08:59:26 +02:00
r852.c
r852.h
s3c2410.c mtd: nand: Pass the CS line to ->setup_data_interface() 2017-06-01 10:09:28 +02:00
sh_flctl.c mtd: nand: Make sure drivers not supporting SET/GET_FEATURES return -ENOTSUPP 2017-05-30 08:59:26 +02:00
sharpsl.c
sm_common.c
sm_common.h
socrates_nand.c mtd: nand: socrates: use nand_scan() for nand_scan_ident/tail() combo 2016-11-07 14:48:53 +01:00
sunxi_nand.c mtd: nand: sunxi: Remove unneeded ->cmdfunc(NAND_CMD_READ0, 0, page) 2017-06-01 10:09:32 +02:00
tango_nand.c mtd: nand: Wait for PAGEPROG to finish in drivers setting NAND_ECC_CUSTOM_PAGE_ACCESS 2017-06-01 10:09:33 +02:00
tmio_nand.c mtd: nand: tmio: return error code of nand_scan() on error 2016-11-07 14:48:44 +01:00
txx9ndfmc.c mtd: nand: import nand_hw_control_init() 2016-09-23 09:35:16 +02:00
vf610_nfc.c mtd: nand: Make sure drivers not supporting SET/GET_FEATURES return -ENOTSUPP 2017-05-30 08:59:26 +02:00
xway_nand.c mtd: update my email address 2017-02-08 12:49:27 -08:00