mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 00:15:26 +07:00
21325e19ca
The ADV748x chip supports routing AFE output to either TXA or TXB. In order to support run-time configuration of video stream path, create an additional (not enabled) "AFE:8->TXA:0" link, and remove the IMMUTABLE flag from existing ones. Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
315 lines
7.6 KiB
C
315 lines
7.6 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Driver for Analog Devices ADV748X CSI-2 Transmitter
|
|
*
|
|
* Copyright (C) 2017 Renesas Electronics Corp.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-ioctl.h>
|
|
|
|
#include "adv748x.h"
|
|
|
|
static int adv748x_csi2_set_virtual_channel(struct adv748x_csi2 *tx,
|
|
unsigned int vc)
|
|
{
|
|
return tx_write(tx, ADV748X_CSI_VC_REF, vc << ADV748X_CSI_VC_REF_SHIFT);
|
|
}
|
|
|
|
/**
|
|
* adv748x_csi2_register_link : Register and link internal entities
|
|
*
|
|
* @tx: CSI2 private entity
|
|
* @v4l2_dev: Video registration device
|
|
* @src: Source subdevice to establish link
|
|
* @src_pad: Pad number of source to link to this @tx
|
|
* @enable: Link enabled flag
|
|
*
|
|
* Ensure that the subdevice is registered against the v4l2_device, and link the
|
|
* source pad to the sink pad of the CSI2 bus entity.
|
|
*/
|
|
static int adv748x_csi2_register_link(struct adv748x_csi2 *tx,
|
|
struct v4l2_device *v4l2_dev,
|
|
struct v4l2_subdev *src,
|
|
unsigned int src_pad,
|
|
bool enable)
|
|
{
|
|
int ret;
|
|
|
|
if (!src->v4l2_dev) {
|
|
ret = v4l2_device_register_subdev(v4l2_dev, src);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return media_create_pad_link(&src->entity, src_pad,
|
|
&tx->sd.entity, ADV748X_CSI2_SINK,
|
|
enable ? MEDIA_LNK_FL_ENABLED : 0);
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* v4l2_subdev_internal_ops
|
|
*
|
|
* We use the internal registered operation to be able to ensure that our
|
|
* incremental subdevices (not connected in the forward path) can be registered
|
|
* against the resulting video path and media device.
|
|
*/
|
|
|
|
static int adv748x_csi2_registered(struct v4l2_subdev *sd)
|
|
{
|
|
struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
|
|
struct adv748x_state *state = tx->state;
|
|
int ret;
|
|
|
|
adv_dbg(state, "Registered %s (%s)", is_txa(tx) ? "TXA":"TXB",
|
|
sd->name);
|
|
|
|
/*
|
|
* Link TXA to AFE and HDMI, and TXB to AFE only as TXB cannot output
|
|
* HDMI.
|
|
*
|
|
* The HDMI->TXA link is enabled by default, as is the AFE->TXB one.
|
|
*/
|
|
if (is_afe_enabled(state)) {
|
|
ret = adv748x_csi2_register_link(tx, sd->v4l2_dev,
|
|
&state->afe.sd,
|
|
ADV748X_AFE_SOURCE,
|
|
is_txb(tx));
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/* Register link to HDMI for TXA only. */
|
|
if (is_txb(tx) || !is_hdmi_enabled(state))
|
|
return 0;
|
|
|
|
return adv748x_csi2_register_link(tx, sd->v4l2_dev, &state->hdmi.sd,
|
|
ADV748X_HDMI_SOURCE, true);
|
|
}
|
|
|
|
static const struct v4l2_subdev_internal_ops adv748x_csi2_internal_ops = {
|
|
.registered = adv748x_csi2_registered,
|
|
};
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* v4l2_subdev_video_ops
|
|
*/
|
|
|
|
static int adv748x_csi2_s_stream(struct v4l2_subdev *sd, int enable)
|
|
{
|
|
struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
|
|
struct v4l2_subdev *src;
|
|
|
|
src = adv748x_get_remote_sd(&tx->pads[ADV748X_CSI2_SINK]);
|
|
if (!src)
|
|
return -EPIPE;
|
|
|
|
return v4l2_subdev_call(src, video, s_stream, enable);
|
|
}
|
|
|
|
static const struct v4l2_subdev_video_ops adv748x_csi2_video_ops = {
|
|
.s_stream = adv748x_csi2_s_stream,
|
|
};
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* v4l2_subdev_pad_ops
|
|
*
|
|
* The CSI2 bus pads are ignorant to the data sizes or formats.
|
|
* But we must support setting the pad formats for format propagation.
|
|
*/
|
|
|
|
static struct v4l2_mbus_framefmt *
|
|
adv748x_csi2_get_pad_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
unsigned int pad, u32 which)
|
|
{
|
|
struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
|
|
|
|
if (which == V4L2_SUBDEV_FORMAT_TRY)
|
|
return v4l2_subdev_get_try_format(sd, cfg, pad);
|
|
|
|
return &tx->format;
|
|
}
|
|
|
|
static int adv748x_csi2_get_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *sdformat)
|
|
{
|
|
struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
|
|
struct adv748x_state *state = tx->state;
|
|
struct v4l2_mbus_framefmt *mbusformat;
|
|
|
|
mbusformat = adv748x_csi2_get_pad_format(sd, cfg, sdformat->pad,
|
|
sdformat->which);
|
|
if (!mbusformat)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&state->mutex);
|
|
|
|
sdformat->format = *mbusformat;
|
|
|
|
mutex_unlock(&state->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv748x_csi2_set_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *sdformat)
|
|
{
|
|
struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
|
|
struct adv748x_state *state = tx->state;
|
|
struct v4l2_mbus_framefmt *mbusformat;
|
|
int ret = 0;
|
|
|
|
mbusformat = adv748x_csi2_get_pad_format(sd, cfg, sdformat->pad,
|
|
sdformat->which);
|
|
if (!mbusformat)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&state->mutex);
|
|
|
|
if (sdformat->pad == ADV748X_CSI2_SOURCE) {
|
|
const struct v4l2_mbus_framefmt *sink_fmt;
|
|
|
|
sink_fmt = adv748x_csi2_get_pad_format(sd, cfg,
|
|
ADV748X_CSI2_SINK,
|
|
sdformat->which);
|
|
|
|
if (!sink_fmt) {
|
|
ret = -EINVAL;
|
|
goto unlock;
|
|
}
|
|
|
|
sdformat->format = *sink_fmt;
|
|
}
|
|
|
|
*mbusformat = sdformat->format;
|
|
|
|
unlock:
|
|
mutex_unlock(&state->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct v4l2_subdev_pad_ops adv748x_csi2_pad_ops = {
|
|
.get_fmt = adv748x_csi2_get_format,
|
|
.set_fmt = adv748x_csi2_set_format,
|
|
};
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* v4l2_subdev_ops
|
|
*/
|
|
|
|
static const struct v4l2_subdev_ops adv748x_csi2_ops = {
|
|
.video = &adv748x_csi2_video_ops,
|
|
.pad = &adv748x_csi2_pad_ops,
|
|
};
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Subdev module and controls
|
|
*/
|
|
|
|
int adv748x_csi2_set_pixelrate(struct v4l2_subdev *sd, s64 rate)
|
|
{
|
|
struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
|
|
|
|
if (!tx->pixel_rate)
|
|
return -EINVAL;
|
|
|
|
return v4l2_ctrl_s_ctrl_int64(tx->pixel_rate, rate);
|
|
}
|
|
|
|
static int adv748x_csi2_s_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_PIXEL_RATE:
|
|
return 0;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static const struct v4l2_ctrl_ops adv748x_csi2_ctrl_ops = {
|
|
.s_ctrl = adv748x_csi2_s_ctrl,
|
|
};
|
|
|
|
static int adv748x_csi2_init_controls(struct adv748x_csi2 *tx)
|
|
{
|
|
|
|
v4l2_ctrl_handler_init(&tx->ctrl_hdl, 1);
|
|
|
|
tx->pixel_rate = v4l2_ctrl_new_std(&tx->ctrl_hdl,
|
|
&adv748x_csi2_ctrl_ops,
|
|
V4L2_CID_PIXEL_RATE, 1, INT_MAX,
|
|
1, 1);
|
|
|
|
tx->sd.ctrl_handler = &tx->ctrl_hdl;
|
|
if (tx->ctrl_hdl.error) {
|
|
v4l2_ctrl_handler_free(&tx->ctrl_hdl);
|
|
return tx->ctrl_hdl.error;
|
|
}
|
|
|
|
return v4l2_ctrl_handler_setup(&tx->ctrl_hdl);
|
|
}
|
|
|
|
int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx)
|
|
{
|
|
int ret;
|
|
|
|
if (!is_tx_enabled(tx))
|
|
return 0;
|
|
|
|
/* Initialise the virtual channel */
|
|
adv748x_csi2_set_virtual_channel(tx, 0);
|
|
|
|
adv748x_subdev_init(&tx->sd, state, &adv748x_csi2_ops,
|
|
MEDIA_ENT_F_VID_IF_BRIDGE,
|
|
is_txa(tx) ? "txa" : "txb");
|
|
|
|
/* Ensure that matching is based upon the endpoint fwnodes */
|
|
tx->sd.fwnode = of_fwnode_handle(state->endpoints[tx->port]);
|
|
|
|
/* Register internal ops for incremental subdev registration */
|
|
tx->sd.internal_ops = &adv748x_csi2_internal_ops;
|
|
|
|
tx->pads[ADV748X_CSI2_SINK].flags = MEDIA_PAD_FL_SINK;
|
|
tx->pads[ADV748X_CSI2_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
|
|
|
|
ret = media_entity_pads_init(&tx->sd.entity, ADV748X_CSI2_NR_PADS,
|
|
tx->pads);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = adv748x_csi2_init_controls(tx);
|
|
if (ret)
|
|
goto err_free_media;
|
|
|
|
ret = v4l2_async_register_subdev(&tx->sd);
|
|
if (ret)
|
|
goto err_free_ctrl;
|
|
|
|
return 0;
|
|
|
|
err_free_ctrl:
|
|
v4l2_ctrl_handler_free(&tx->ctrl_hdl);
|
|
err_free_media:
|
|
media_entity_cleanup(&tx->sd.entity);
|
|
|
|
return ret;
|
|
}
|
|
|
|
void adv748x_csi2_cleanup(struct adv748x_csi2 *tx)
|
|
{
|
|
if (!is_tx_enabled(tx))
|
|
return;
|
|
|
|
v4l2_async_unregister_subdev(&tx->sd);
|
|
media_entity_cleanup(&tx->sd.entity);
|
|
v4l2_ctrl_handler_free(&tx->ctrl_hdl);
|
|
}
|