mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 19:06:23 +07:00
f3efc406d6
Add missed "cpld4_version" attribute.
Fixes: 52675da1d0 ("Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
209 lines
8.4 KiB
Plaintext
209 lines
8.4 KiB
Plaintext
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_health
|
|
Date: June 2018
|
|
KernelVersion: 4.19
|
|
Contact: Vadim Pasternak <vadimpmellanox.com>
|
|
Description: This file shows ASIC health status. The possible values are:
|
|
0 - health failed, 2 - health OK, 3 - ASIC in booting state.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version
|
|
Date: June 2018
|
|
KernelVersion: 4.19
|
|
Contact: Vadim Pasternak <vadimpmellanox.com>
|
|
Description: These files show with which CPLD versions have been burned
|
|
on carrier and switch boards.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/fan_dir
|
|
Date: December 2018
|
|
KernelVersion: 5.0
|
|
Contact: Vadim Pasternak <vadimpmellanox.com>
|
|
Description: This file shows the system fans direction:
|
|
forward direction - relevant bit is set 0;
|
|
reversed direction - relevant bit is set 1.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version
|
|
Date: November 2018
|
|
KernelVersion: 5.0
|
|
Contact: Vadim Pasternak <vadimpmellanox.com>
|
|
Description: These files show with which CPLD versions have been burned
|
|
on LED or Gearbox board.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable
|
|
Date: November 2018
|
|
KernelVersion: 5.0
|
|
Contact: Vadim Pasternak <vadimpmellanox.com>
|
|
Description: These files enable and disable the access to the JTAG domain.
|
|
By default access to the JTAG domain is disabled.
|
|
|
|
The file is read/write.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/select_iio
|
|
Date: June 2018
|
|
KernelVersion: 4.19
|
|
Contact: Vadim Pasternak <vadimpmellanox.com>
|
|
Description: This file allows iio devices selection.
|
|
|
|
Attribute select_iio can be written with 0 or with 1. It
|
|
selects which one of iio devices can be accessed.
|
|
|
|
The file is read/write.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu1_on
|
|
/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu2_on
|
|
/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_cycle
|
|
/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_down
|
|
Date: June 2018
|
|
KernelVersion: 4.19
|
|
Contact: Vadim Pasternak <vadimpmellanox.com>
|
|
Description: These files allow asserting system power cycling, switching
|
|
power supply units on and off and system's main power domain
|
|
shutdown.
|
|
Expected behavior:
|
|
When pwr_cycle is written 1: auxiliary power domain will go
|
|
down and after short period (about 1 second) up.
|
|
When psu1_on or psu2_on is written 1, related unit will be
|
|
disconnected from the power source, when written 0 - connected.
|
|
If both are written 1 - power supplies main power domain will
|
|
go down.
|
|
When pwr_down is written 1, system's main power domain will go
|
|
down.
|
|
|
|
The files are write only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_aux_pwr_or_ref
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_asic_thermal
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_hotswap_or_halt
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_hotswap_or_wd
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_fw_reset
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_long_pb
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_main_pwr_fail
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_short_pb
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_reset
|
|
Date: June 2018
|
|
KernelVersion: 4.19
|
|
Contact: Vadim Pasternak <vadimpmellanox.com>
|
|
Description: These files show the system reset cause, as following: power
|
|
auxiliary outage or power refresh, ASIC thermal shutdown, halt,
|
|
hotswap, watchdog, firmware reset, long press power button,
|
|
short press power button, software reset. Value 1 in file means
|
|
this is reset cause, 0 - otherwise. Only one of the above
|
|
causes could be 1 at the same time, representing only last
|
|
reset cause.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_pwr_fail
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_comex
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_system
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_voltmon_upgrade_fail
|
|
Date: November 2018
|
|
KernelVersion: 5.0
|
|
Contact: Vadim Pasternak <vadimpmellanox.com>
|
|
Description: These files show the system reset cause, as following: ComEx
|
|
power fail, reset from ComEx, system platform reset, reset
|
|
due to voltage monitor devices upgrade failure,
|
|
Value 1 in file means this is reset cause, 0 - otherwise.
|
|
Only one bit could be 1 at the same time, representing only
|
|
the last reset cause.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version
|
|
Date: November 2018
|
|
KernelVersion: 5.0
|
|
Contact: Vadim Pasternak <vadimpmellanox.com>
|
|
Description: These files show with which CPLD versions have been burned
|
|
on LED board.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_thermal
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_wd
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_asic
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_reload_bios
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd
|
|
Date: June 2019
|
|
KernelVersion: 5.3
|
|
Contact: Vadim Pasternak <vadimpmellanox.com>
|
|
Description: These files show the system reset cause, as following:
|
|
COMEX thermal shutdown; wathchdog power off or reset was derived
|
|
by one of the next components: COMEX, switch board or by Small Form
|
|
Factor mezzanine, reset requested from ASIC, reset cuased by BIOS
|
|
reload. Value 1 in file means this is reset cause, 0 - otherwise.
|
|
Only one of the above causes could be 1 at the same time, representing
|
|
only last reset cause.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config1
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config2
|
|
Date: January 2020
|
|
KernelVersion: 5.6
|
|
Contact: Vadim Pasternak <vadimpmellanox.com>
|
|
Description: These files show system static topology identification
|
|
like system's static I2C topology, number and type of FPGA
|
|
devices within the system and so on.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_ac_pwr_fail
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_platform
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_soc
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_pwr_off
|
|
Date: January 2020
|
|
KernelVersion: 5.6
|
|
Contact: Vadim Pasternak <vadimpmellanox.com>
|
|
Description: These files show the system reset causes, as following: reset
|
|
due to AC power failure, reset invoked from software by
|
|
assertion reset signal through CPLD. reset caused by signal
|
|
asserted by SOC through ACPI register, reset invoked from
|
|
software by assertion power off signal through CPLD.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pcie_asic_reset_dis
|
|
Date: January 2020
|
|
KernelVersion: 5.6
|
|
Contact: Vadim Pasternak <vadimpmellanox.com>
|
|
Description: This file allows to retain ASIC up during PCIe root complex
|
|
reset, when attribute is set 1.
|
|
|
|
The file is read/write.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/vpd_wp
|
|
Date: January 2020
|
|
KernelVersion: 5.6
|
|
Contact: Vadim Pasternak <vadimpmellanox.com>
|
|
Description: This file allows to overwrite system VPD hardware wrtie
|
|
protection when attribute is set 1.
|
|
|
|
The file is read/write.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/voltreg_update_status
|
|
Date: January 2020
|
|
KernelVersion: 5.6
|
|
Contact: Vadim Pasternak <vadimpmellanox.com>
|
|
Description: This file exposes the configuration update status of burnable
|
|
voltage regulator devices. The status values are as following:
|
|
0 - OK; 1 - CRC failure; 2 = I2C failure; 3 - in progress.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ufm_version
|
|
Date: January 2020
|
|
KernelVersion: 5.6
|
|
Contact: Vadim Pasternak <vadimpmellanox.com>
|
|
Description: This file exposes the firmware version of burnable voltage
|
|
regulator devices.
|
|
|
|
The file is read only.
|