AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-16 01:36:42 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
206e732323
linux_dsm_epyc7002/include/video/sstfb.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

357 lines
11 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* linux/drivers/video/sstfb.h -- voodoo graphics frame buffer
*
* Copyright (c) 2000,2001 Ghozlane Toumi <gtoumi@messel.emse.fr>
*
* Created 28 Aug 2001 by Ghozlane Toumi
*/
#ifndef _SSTFB_H_
#define _SSTFB_H_
/*
*
* Debug Stuff
*
*/
#ifdef SST_DEBUG
# define dprintk(X...) printk("sstfb: " X)
# define SST_DEBUG_REG 1
# define SST_DEBUG_FUNC 1
# define SST_DEBUG_VAR 1
#else
# define dprintk(X...)
# define SST_DEBUG_REG 0
# define SST_DEBUG_FUNC 0
# define SST_DEBUG_VAR 0
#endif
#if (SST_DEBUG_REG > 0)
# define r_dprintk(X...) dprintk(X)
#else
# define r_dprintk(X...)
#endif
#if (SST_DEBUG_REG > 1)
# define r_ddprintk(X...) dprintk(" " X)
#else
# define r_ddprintk(X...)
#endif
#if (SST_DEBUG_FUNC > 0)
# define f_dprintk(X...) dprintk(X)
#else
# define f_dprintk(X...)
#endif
#if (SST_DEBUG_FUNC > 1)
# define f_ddprintk(X...) dprintk(" " X)
#else
# define f_ddprintk(X...)
#endif
#if (SST_DEBUG_FUNC > 2)
# define f_dddprintk(X...) dprintk(" " X)
#else
# define f_dddprintk(X...)
#endif
#if (SST_DEBUG_VAR > 0)
# define v_dprintk(X...) dprintk(X)
# define print_var(V, X...) \
{ \
dprintk(X); \
printk(" :\n"); \
sst_dbg_print_var(V); \
}
#else
# define v_dprintk(X...)
# define print_var(X,Y...)
#endif
#define POW2(x) (1ul<<(x))
/*
*
* Const
*
*/
/* pci stuff */
#define PCI_INIT_ENABLE 0x40
# define PCI_EN_INIT_WR BIT(0)
# define PCI_EN_FIFO_WR BIT(1)
# define PCI_REMAP_DAC BIT(2)
#define PCI_VCLK_ENABLE 0xc0 /* enable video */
#define PCI_VCLK_DISABLE 0xe0
/* register offsets from memBaseAddr */
#define STATUS 0x0000
# define STATUS_FBI_BUSY BIT(7)
#define FBZMODE 0x0110
# define EN_CLIPPING BIT(0) /* enable clipping */
# define EN_RGB_WRITE BIT(9) /* enable writes to rgb area */
# define EN_ALPHA_WRITE BIT(10)
# define ENGINE_INVERT_Y BIT(17) /* invert Y origin (pipe) */
#define LFBMODE 0x0114
# define LFB_565 0 /* bits 3:0 .16 bits RGB */
# define LFB_888 4 /* 24 bits RGB */
# define LFB_8888 5 /* 32 bits ARGB */
# define WR_BUFF_FRONT 0 /* write buf select (front) */
# define WR_BUFF_BACK (1 << 4) /* back */
# define RD_BUFF_FRONT 0 /* read buff select (front) */
# define RD_BUFF_BACK (1 << 6) /* back */
# define EN_PXL_PIPELINE BIT(8) /* pixel pipeline (clip..)*/
# define LFB_WORD_SWIZZLE_WR BIT(11) /* enable write-wordswap (big-endian) */
# define LFB_BYTE_SWIZZLE_WR BIT(12) /* enable write-byteswap (big-endian) */
# define LFB_INVERT_Y BIT(13) /* invert Y origin (LFB) */
# define LFB_WORD_SWIZZLE_RD BIT(15) /* enable read-wordswap (big-endian) */
# define LFB_BYTE_SWIZZLE_RD BIT(16) /* enable read-byteswap (big-endian) */
#define CLIP_LEFT_RIGHT 0x0118
#define CLIP_LOWY_HIGHY 0x011c
#define NOPCMD 0x0120
#define FASTFILLCMD 0x0124
#define SWAPBUFFCMD 0x0128
#define FBIINIT4 0x0200 /* misc controls */
# define FAST_PCI_READS 0 /* 1 waitstate */
# define SLOW_PCI_READS BIT(0) /* 2 ws */
# define LFB_READ_AHEAD BIT(1)
#define BACKPORCH 0x0208
#define VIDEODIMENSIONS 0x020c
#define FBIINIT0 0x0210 /* misc+fifo controls */
# define DIS_VGA_PASSTHROUGH BIT(0)
# define FBI_RESET BIT(1)
# define FIFO_RESET BIT(2)
#define FBIINIT1 0x0214 /* PCI + video controls */
# define VIDEO_MASK 0x8080010f /* masks video related bits V1+V2*/
# define FAST_PCI_WRITES 0 /* 0 ws */
# define SLOW_PCI_WRITES BIT(1) /* 1 ws */
# define EN_LFB_READ BIT(3)
# define TILES_IN_X_SHIFT 4
# define VIDEO_RESET BIT(8)
# define EN_BLANKING BIT(12)
# define EN_DATA_OE BIT(13)
# define EN_BLANK_OE BIT(14)
# define EN_HVSYNC_OE BIT(15)
# define EN_DCLK_OE BIT(16)
# define SEL_INPUT_VCLK_2X 0 /* bit 17 */
# define SEL_INPUT_VCLK_SLAVE BIT(17)
# define SEL_SOURCE_VCLK_SLAVE 0 /* bits 21:20 */
# define SEL_SOURCE_VCLK_2X_DIV2 (0x01 << 20)
# define SEL_SOURCE_VCLK_2X_SEL (0x02 << 20)
# define EN_24BPP BIT(22)
# define TILES_IN_X_MSB_SHIFT 24 /* v2 */
# define VCLK_2X_SEL_DEL_SHIFT 27 /* vclk out delay 0,4,6,8ns */
# define VCLK_DEL_SHIFT 29 /* vclk in delay */
#define FBIINIT2 0x0218 /* Dram controls */
# define EN_FAST_RAS_READ BIT(5)
# define EN_DRAM_OE BIT(6)
# define EN_FAST_RD_AHEAD_WR BIT(7)
# define VIDEO_OFFSET_SHIFT 11 /* unit: #rows tile 64x16/2 */
# define SWAP_DACVSYNC 0
# define SWAP_DACDATA0 (1 << 9)
# define SWAP_FIFO_STALL (2 << 9)
# define EN_RD_AHEAD_FIFO BIT(21)
# define EN_DRAM_REFRESH BIT(22)
# define DRAM_REFRESH_16 (0x30 << 23) /* dram 16 ms */
#define DAC_READ FBIINIT2 /* in remap mode */
#define FBIINIT3 0x021c /* fbi controls */
# define DISABLE_TEXTURE BIT(6)
# define Y_SWAP_ORIGIN_SHIFT 22 /* Y swap subtraction value */
#define HSYNC 0x0220
#define VSYNC 0x0224
#define DAC_DATA 0x022c
# define DAC_READ_CMD BIT(11) /* set read dacreg mode */
#define FBIINIT5 0x0244 /* v2 specific */
# define FBIINIT5_MASK 0xfa40ffff /* mask video bits*/
# define HDOUBLESCAN BIT(20)
# define VDOUBLESCAN BIT(21)
# define HSYNC_HIGH BIT(23)
# define VSYNC_HIGH BIT(24)
# define INTERLACE BIT(26)
#define FBIINIT6 0x0248 /* v2 specific */
# define TILES_IN_X_LSB_SHIFT 30 /* v2 */
#define FBIINIT7 0x024c /* v2 specific */
#define BLTSRCBASEADDR 0x02c0 /* BitBLT Source base address */
#define BLTDSTBASEADDR 0x02c4 /* BitBLT Destination base address */
#define BLTXYSTRIDES 0x02c8 /* BitBLT Source and Destination strides */
#define BLTSRCCHROMARANGE 0x02cc /* BitBLT Source Chroma key range */
#define BLTDSTCHROMARANGE 0x02d0 /* BitBLT Destination Chroma key range */
#define BLTCLIPX 0x02d4 /* BitBLT Min/Max X clip values */
#define BLTCLIPY 0x02d8 /* BitBLT Min/Max Y clip values */
#define BLTSRCXY 0x02e0 /* BitBLT Source starting XY coordinates */
#define BLTDSTXY 0x02e4 /* BitBLT Destination starting XY coordinates */
#define BLTSIZE 0x02e8 /* BitBLT width and height */
#define BLTROP 0x02ec /* BitBLT Raster operations */
# define BLTROP_COPY 0x0cccc
# define BLTROP_INVERT 0x05555
# define BLTROP_XOR 0x06666
#define BLTCOLOR 0x02f0 /* BitBLT and foreground background colors */
#define BLTCOMMAND 0x02f8 /* BitBLT command mode (v2 specific) */
# define BLT_SCR2SCR_BITBLT 0 /* Screen-to-Screen BitBLT */
# define BLT_CPU2SCR_BITBLT 1 /* CPU-to-screen BitBLT */
# define BLT_RECFILL_BITBLT 2 /* BitBLT Rectangle Fill */
# define BLT_16BPP_FMT 2 /* 16 BPP (5-6-5 RGB) */
#define BLTDATA 0x02fc /* BitBLT data for CPU-to-Screen BitBLTs */
# define LAUNCH_BITBLT BIT(31) /* Launch BitBLT in BltCommand, bltDstXY or bltSize */
/* Dac Registers */
#define DACREG_WMA 0x0 /* pixel write mode address */
#define DACREG_LUT 0x01 /* color value */
#define DACREG_RMR 0x02 /* pixel mask */
#define DACREG_RMA 0x03 /* pixel read mode address */
/*Dac registers in indexed mode (TI, ATT dacs) */
#define DACREG_ADDR_I DACREG_WMA
#define DACREG_DATA_I DACREG_RMR
#define DACREG_RMR_I 0x00
#define DACREG_CR0_I 0x01
# define DACREG_CR0_EN_INDEXED BIT(0) /* enable indexec mode */
# define DACREG_CR0_8BIT BIT(1) /* set dac to 8 bits/read */
# define DACREG_CR0_PWDOWN BIT(3) /* powerdown dac */
# define DACREG_CR0_16BPP 0x30 /* mode 3 */
# define DACREG_CR0_24BPP 0x50 /* mode 5 */
#define DACREG_CR1_I 0x05
#define DACREG_CC_I 0x06
# define DACREG_CC_CLKA BIT(7) /* clk A controlled by regs */
# define DACREG_CC_CLKA_C (2<<4) /* clk A uses reg C */
# define DACREG_CC_CLKB BIT(3) /* clk B controlled by regs */
# define DACREG_CC_CLKB_D 3 /* clkB uses reg D */
#define DACREG_AC0_I 0x48 /* clock A reg C */
#define DACREG_AC1_I 0x49
#define DACREG_BD0_I 0x6c /* clock B reg D */
#define DACREG_BD1_I 0x6d
/* identification constants */
#define DACREG_MIR_TI 0x97
#define DACREG_DIR_TI 0x09
#define DACREG_MIR_ATT 0x84
#define DACREG_DIR_ATT 0x09
/* ics dac specific registers */
#define DACREG_ICS_PLLWMA 0x04 /* PLL write mode address */
#define DACREG_ICS_PLLDATA 0x05 /* PLL data /parameter */
#define DACREG_ICS_CMD 0x06 /* command */
# define DACREG_ICS_CMD_16BPP 0x50 /* ics color mode 6 (16bpp bypass)*/
# define DACREG_ICS_CMD_24BPP 0x70 /* ics color mode 7 (24bpp bypass)*/
# define DACREG_ICS_CMD_PWDOWN BIT(0) /* powerdown dac */
#define DACREG_ICS_PLLRMA 0x07 /* PLL read mode address */
/*
* pll parameter register:
* indexed : write addr to PLLWMA, write data in PLLDATA.
* for reads use PLLRMA .
* 8 freq registers (0-7) for video clock (CLK0)
* 2 freq registers (a-b) for graphic clock (CLK1)
*/
#define DACREG_ICS_PLL_CLK0_1_INI 0x55 /* initial pll M value for freq f1 */
#define DACREG_ICS_PLL_CLK0_7_INI 0x71 /* f7 */
#define DACREG_ICS_PLL_CLK1_B_INI 0x79 /* fb */
#define DACREG_ICS_PLL_CTRL 0x0e
# define DACREG_ICS_CLK0 BIT(5)
# define DACREG_ICS_CLK0_0 0
# define DACREG_ICS_CLK1_A 0 /* bit4 */
/* sst default init registers */
#define FBIINIT0_DEFAULT DIS_VGA_PASSTHROUGH
#define FBIINIT1_DEFAULT \
( \
FAST_PCI_WRITES \
/* SLOW_PCI_WRITES*/ \
| VIDEO_RESET \
| 10 << TILES_IN_X_SHIFT\
| SEL_SOURCE_VCLK_2X_SEL\
| EN_LFB_READ \
)
#define FBIINIT2_DEFAULT \
( \
SWAP_DACVSYNC \
| EN_DRAM_OE \
| DRAM_REFRESH_16 \
| EN_DRAM_REFRESH \
| EN_FAST_RAS_READ \
| EN_RD_AHEAD_FIFO \
| EN_FAST_RD_AHEAD_WR \
)
#define FBIINIT3_DEFAULT \
( DISABLE_TEXTURE )
#define FBIINIT4_DEFAULT \
( \
FAST_PCI_READS \
/* SLOW_PCI_READS*/ \
| LFB_READ_AHEAD \
)
/* Careful with this one : writing back the data just read will trash the DAC
reading some fields give logic value on pins, but setting this field will
set the source signal driving the pin. conclusion : just use the default
as a base before writing back .
*/
#define FBIINIT6_DEFAULT (0x0)
/*
*
* Misc Const
*
*/
/* ioctl to enable/disable VGA passthrough */
#define SSTFB_SET_VGAPASS _IOW('F', 0xdd, __u32)
#define SSTFB_GET_VGAPASS _IOR('F', 0xdd, __u32)
/* used to know witch clock to set */
enum {
VID_CLOCK=0,
GFX_CLOCK=1,
};
/* freq max */
#define DAC_FREF 14318 /* DAC reference freq (Khz) */
#define VCO_MAX 260000
/*
* driver structs
*/
struct pll_timing {
unsigned int m;
unsigned int n;
unsigned int p;
};
struct dac_switch {
const char *name;
int (*detect) (struct fb_info *info);
int (*set_pll) (struct fb_info *info, const struct pll_timing *t, const int clock);
void (*set_vidmod) (struct fb_info *info, const int bpp);
};
struct sst_spec {
char * name;
int default_gfx_clock; /* 50000 for voodoo1, 75000 for voodoo2 */
int max_gfxclk; /* ! in Mhz ie 60 for voodoo 1 */
};
struct sstfb_par {
u32 palette[16];
unsigned int yDim;
unsigned int hSyncOn; /* hsync_len */
unsigned int hSyncOff; /* left_margin + xres + right_margin */
unsigned int hBackPorch;/* left_margin */
unsigned int vSyncOn;
unsigned int vSyncOff;
unsigned int vBackPorch;
struct pll_timing pll;
unsigned int tiles_in_X;/* num of tiles in X res */
u8 __iomem *mmio_vbase;
struct dac_switch dac_sw; /* dac specific functions */
struct pci_dev *dev;
int type;
u8 revision;
u8 vgapass; /* VGA pass through: 1=enabled, 0=disabled */
};
#endif /* _SSTFB_H_ */
Reference in New Issue View Git Blame Copy Permalink