mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 08:26:49 +07:00
2069ecfbe1
This isn't really a quirk; calling it directly from pci_add_device makes more sense. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
3093 lines
107 KiB
C
3093 lines
107 KiB
C
/*
|
|
* This file contains work-arounds for many known PCI hardware
|
|
* bugs. Devices present only on certain architectures (host
|
|
* bridges et cetera) should be handled in arch-specific code.
|
|
*
|
|
* Note: any quirks for hotpluggable devices must _NOT_ be declared __init.
|
|
*
|
|
* Copyright (c) 1999 Martin Mares <mj@ucw.cz>
|
|
*
|
|
* Init/reset quirks for USB host controllers should be in the
|
|
* USB quirks file, where their drivers can access reuse it.
|
|
*
|
|
* The bridge optimization stuff has been removed. If you really
|
|
* have a silly BIOS which is unable to set your host bridge right,
|
|
* use the PowerTweak utility (see http://powertweak.sourceforge.net).
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/export.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/kallsyms.h>
|
|
#include <linux/dmi.h>
|
|
#include <linux/pci-aspm.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/ktime.h>
|
|
#include <asm/dma.h> /* isa_dma_bridge_buggy */
|
|
#include "pci.h"
|
|
|
|
/*
|
|
* Decoding should be disabled for a PCI device during BAR sizing to avoid
|
|
* conflict. But doing so may cause problems on host bridge and perhaps other
|
|
* key system devices. For devices that need to have mmio decoding always-on,
|
|
* we need to set the dev->mmio_always_on bit.
|
|
*/
|
|
static void __devinit quirk_mmio_always_on(struct pci_dev *dev)
|
|
{
|
|
dev->mmio_always_on = 1;
|
|
}
|
|
DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on);
|
|
|
|
/* The Mellanox Tavor device gives false positive parity errors
|
|
* Mark this device with a broken_parity_status, to allow
|
|
* PCI scanning code to "skip" this now blacklisted device.
|
|
*/
|
|
static void __devinit quirk_mellanox_tavor(struct pci_dev *dev)
|
|
{
|
|
dev->broken_parity_status = 1; /* This device gives false positives */
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR,quirk_mellanox_tavor);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE,quirk_mellanox_tavor);
|
|
|
|
/* Deal with broken BIOS'es that neglect to enable passive release,
|
|
which can cause problems in combination with the 82441FX/PPro MTRRs */
|
|
static void quirk_passive_release(struct pci_dev *dev)
|
|
{
|
|
struct pci_dev *d = NULL;
|
|
unsigned char dlc;
|
|
|
|
/* We have to make sure a particular bit is set in the PIIX3
|
|
ISA bridge, so we have to go out and find it. */
|
|
while ((d = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, d))) {
|
|
pci_read_config_byte(d, 0x82, &dlc);
|
|
if (!(dlc & 1<<1)) {
|
|
dev_info(&d->dev, "PIIX3: Enabling Passive Release\n");
|
|
dlc |= 1<<1;
|
|
pci_write_config_byte(d, 0x82, dlc);
|
|
}
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release);
|
|
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release);
|
|
|
|
/* The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a workaround
|
|
but VIA don't answer queries. If you happen to have good contacts at VIA
|
|
ask them for me please -- Alan
|
|
|
|
This appears to be BIOS not version dependent. So presumably there is a
|
|
chipset level fix */
|
|
|
|
static void __devinit quirk_isa_dma_hangs(struct pci_dev *dev)
|
|
{
|
|
if (!isa_dma_bridge_buggy) {
|
|
isa_dma_bridge_buggy=1;
|
|
dev_info(&dev->dev, "Activating ISA DMA hang workarounds\n");
|
|
}
|
|
}
|
|
/*
|
|
* Its not totally clear which chipsets are the problematic ones
|
|
* We know 82C586 and 82C596 variants are affected.
|
|
*/
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_isa_dma_hangs);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596, quirk_isa_dma_hangs);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, quirk_isa_dma_hangs);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, quirk_isa_dma_hangs);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_1, quirk_isa_dma_hangs);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_2, quirk_isa_dma_hangs);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs);
|
|
|
|
/*
|
|
* Intel NM10 "TigerPoint" LPC PM1a_STS.BM_STS must be clear
|
|
* for some HT machines to use C4 w/o hanging.
|
|
*/
|
|
static void __devinit quirk_tigerpoint_bm_sts(struct pci_dev *dev)
|
|
{
|
|
u32 pmbase;
|
|
u16 pm1a;
|
|
|
|
pci_read_config_dword(dev, 0x40, &pmbase);
|
|
pmbase = pmbase & 0xff80;
|
|
pm1a = inw(pmbase);
|
|
|
|
if (pm1a & 0x10) {
|
|
dev_info(&dev->dev, FW_BUG "TigerPoint LPC.BM_STS cleared\n");
|
|
outw(0x10, pmbase);
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TGP_LPC, quirk_tigerpoint_bm_sts);
|
|
|
|
/*
|
|
* Chipsets where PCI->PCI transfers vanish or hang
|
|
*/
|
|
static void __devinit quirk_nopcipci(struct pci_dev *dev)
|
|
{
|
|
if ((pci_pci_problems & PCIPCI_FAIL)==0) {
|
|
dev_info(&dev->dev, "Disabling direct PCI/PCI transfers\n");
|
|
pci_pci_problems |= PCIPCI_FAIL;
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, quirk_nopcipci);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, quirk_nopcipci);
|
|
|
|
static void __devinit quirk_nopciamd(struct pci_dev *dev)
|
|
{
|
|
u8 rev;
|
|
pci_read_config_byte(dev, 0x08, &rev);
|
|
if (rev == 0x13) {
|
|
/* Erratum 24 */
|
|
dev_info(&dev->dev, "Chipset erratum: Disabling direct PCI/AGP transfers\n");
|
|
pci_pci_problems |= PCIAGP_FAIL;
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8151_0, quirk_nopciamd);
|
|
|
|
/*
|
|
* Triton requires workarounds to be used by the drivers
|
|
*/
|
|
static void __devinit quirk_triton(struct pci_dev *dev)
|
|
{
|
|
if ((pci_pci_problems&PCIPCI_TRITON)==0) {
|
|
dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n");
|
|
pci_pci_problems |= PCIPCI_TRITON;
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, quirk_triton);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437VX, quirk_triton);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439, quirk_triton);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quirk_triton);
|
|
|
|
/*
|
|
* VIA Apollo KT133 needs PCI latency patch
|
|
* Made according to a windows driver based patch by George E. Breese
|
|
* see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm
|
|
* and http://www.georgebreese.com/net/software/#PCI
|
|
* Also see http://www.au-ja.org/review-kt133a-1-en.phtml for
|
|
* the info on which Mr Breese based his work.
|
|
*
|
|
* Updated based on further information from the site and also on
|
|
* information provided by VIA
|
|
*/
|
|
static void quirk_vialatency(struct pci_dev *dev)
|
|
{
|
|
struct pci_dev *p;
|
|
u8 busarb;
|
|
/* Ok we have a potential problem chipset here. Now see if we have
|
|
a buggy southbridge */
|
|
|
|
p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, NULL);
|
|
if (p!=NULL) {
|
|
/* 0x40 - 0x4f == 686B, 0x10 - 0x2f == 686A; thanks Dan Hollis */
|
|
/* Check for buggy part revisions */
|
|
if (p->revision < 0x40 || p->revision > 0x42)
|
|
goto exit;
|
|
} else {
|
|
p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL);
|
|
if (p==NULL) /* No problem parts */
|
|
goto exit;
|
|
/* Check for buggy part revisions */
|
|
if (p->revision < 0x10 || p->revision > 0x12)
|
|
goto exit;
|
|
}
|
|
|
|
/*
|
|
* Ok we have the problem. Now set the PCI master grant to
|
|
* occur every master grant. The apparent bug is that under high
|
|
* PCI load (quite common in Linux of course) you can get data
|
|
* loss when the CPU is held off the bus for 3 bus master requests
|
|
* This happens to include the IDE controllers....
|
|
*
|
|
* VIA only apply this fix when an SB Live! is present but under
|
|
* both Linux and Windows this isn't enough, and we have seen
|
|
* corruption without SB Live! but with things like 3 UDMA IDE
|
|
* controllers. So we ignore that bit of the VIA recommendation..
|
|
*/
|
|
|
|
pci_read_config_byte(dev, 0x76, &busarb);
|
|
/* Set bit 4 and bi 5 of byte 76 to 0x01
|
|
"Master priority rotation on every PCI master grant */
|
|
busarb &= ~(1<<5);
|
|
busarb |= (1<<4);
|
|
pci_write_config_byte(dev, 0x76, busarb);
|
|
dev_info(&dev->dev, "Applying VIA southbridge workaround\n");
|
|
exit:
|
|
pci_dev_put(p);
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency);
|
|
/* Must restore this on a resume from RAM */
|
|
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency);
|
|
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency);
|
|
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency);
|
|
|
|
/*
|
|
* VIA Apollo VP3 needs ETBF on BT848/878
|
|
*/
|
|
static void __devinit quirk_viaetbf(struct pci_dev *dev)
|
|
{
|
|
if ((pci_pci_problems&PCIPCI_VIAETBF)==0) {
|
|
dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n");
|
|
pci_pci_problems |= PCIPCI_VIAETBF;
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_viaetbf);
|
|
|
|
static void __devinit quirk_vsfx(struct pci_dev *dev)
|
|
{
|
|
if ((pci_pci_problems&PCIPCI_VSFX)==0) {
|
|
dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n");
|
|
pci_pci_problems |= PCIPCI_VSFX;
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576, quirk_vsfx);
|
|
|
|
/*
|
|
* Ali Magik requires workarounds to be used by the drivers
|
|
* that DMA to AGP space. Latency must be set to 0xA and triton
|
|
* workaround applied too
|
|
* [Info kindly provided by ALi]
|
|
*/
|
|
static void __init quirk_alimagik(struct pci_dev *dev)
|
|
{
|
|
if ((pci_pci_problems&PCIPCI_ALIMAGIK)==0) {
|
|
dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n");
|
|
pci_pci_problems |= PCIPCI_ALIMAGIK|PCIPCI_TRITON;
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1647, quirk_alimagik);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1651, quirk_alimagik);
|
|
|
|
/*
|
|
* Natoma has some interesting boundary conditions with Zoran stuff
|
|
* at least
|
|
*/
|
|
static void __devinit quirk_natoma(struct pci_dev *dev)
|
|
{
|
|
if ((pci_pci_problems&PCIPCI_NATOMA)==0) {
|
|
dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n");
|
|
pci_pci_problems |= PCIPCI_NATOMA;
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_natoma);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_0, quirk_natoma);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_1, quirk_natoma);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0, quirk_natoma);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_1, quirk_natoma);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2, quirk_natoma);
|
|
|
|
/*
|
|
* This chip can cause PCI parity errors if config register 0xA0 is read
|
|
* while DMAs are occurring.
|
|
*/
|
|
static void __devinit quirk_citrine(struct pci_dev *dev)
|
|
{
|
|
dev->cfg_size = 0xA0;
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, quirk_citrine);
|
|
|
|
/*
|
|
* S3 868 and 968 chips report region size equal to 32M, but they decode 64M.
|
|
* If it's needed, re-allocate the region.
|
|
*/
|
|
static void __devinit quirk_s3_64M(struct pci_dev *dev)
|
|
{
|
|
struct resource *r = &dev->resource[0];
|
|
|
|
if ((r->start & 0x3ffffff) || r->end != r->start + 0x3ffffff) {
|
|
r->start = 0;
|
|
r->end = 0x3ffffff;
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M);
|
|
|
|
/*
|
|
* Some CS5536 BIOSes (for example, the Soekris NET5501 board w/ comBIOS
|
|
* ver. 1.33 20070103) don't set the correct ISA PCI region header info.
|
|
* BAR0 should be 8 bytes; instead, it may be set to something like 8k
|
|
* (which conflicts w/ BAR1's memory range).
|
|
*/
|
|
static void __devinit quirk_cs5536_vsa(struct pci_dev *dev)
|
|
{
|
|
if (pci_resource_len(dev, 0) != 8) {
|
|
struct resource *res = &dev->resource[0];
|
|
res->end = res->start + 8 - 1;
|
|
dev_info(&dev->dev, "CS5536 ISA bridge bug detected "
|
|
"(incorrect header); workaround applied.\n");
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa);
|
|
|
|
static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region,
|
|
unsigned size, int nr, const char *name)
|
|
{
|
|
region &= ~(size-1);
|
|
if (region) {
|
|
struct pci_bus_region bus_region;
|
|
struct resource *res = dev->resource + nr;
|
|
|
|
res->name = pci_name(dev);
|
|
res->start = region;
|
|
res->end = region + size - 1;
|
|
res->flags = IORESOURCE_IO;
|
|
|
|
/* Convert from PCI bus to resource space. */
|
|
bus_region.start = res->start;
|
|
bus_region.end = res->end;
|
|
pcibios_bus_to_resource(dev, res, &bus_region);
|
|
|
|
if (pci_claim_resource(dev, nr) == 0)
|
|
dev_info(&dev->dev, "quirk: %pR claimed by %s\n",
|
|
res, name);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* ATI Northbridge setups MCE the processor if you even
|
|
* read somewhere between 0x3b0->0x3bb or read 0x3d3
|
|
*/
|
|
static void __devinit quirk_ati_exploding_mce(struct pci_dev *dev)
|
|
{
|
|
dev_info(&dev->dev, "ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb\n");
|
|
/* Mae rhaid i ni beidio ag edrych ar y lleoliadiau I/O hyn */
|
|
request_region(0x3b0, 0x0C, "RadeonIGP");
|
|
request_region(0x3d3, 0x01, "RadeonIGP");
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, quirk_ati_exploding_mce);
|
|
|
|
/*
|
|
* Let's make the southbridge information explicit instead
|
|
* of having to worry about people probing the ACPI areas,
|
|
* for example.. (Yes, it happens, and if you read the wrong
|
|
* ACPI register it will put the machine to sleep with no
|
|
* way of waking it up again. Bummer).
|
|
*
|
|
* ALI M7101: Two IO regions pointed to by words at
|
|
* 0xE0 (64 bytes of ACPI registers)
|
|
* 0xE2 (32 bytes of SMB registers)
|
|
*/
|
|
static void __devinit quirk_ali7101_acpi(struct pci_dev *dev)
|
|
{
|
|
u16 region;
|
|
|
|
pci_read_config_word(dev, 0xE0, ®ion);
|
|
quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "ali7101 ACPI");
|
|
pci_read_config_word(dev, 0xE2, ®ion);
|
|
quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1, "ali7101 SMB");
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, quirk_ali7101_acpi);
|
|
|
|
static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable)
|
|
{
|
|
u32 devres;
|
|
u32 mask, size, base;
|
|
|
|
pci_read_config_dword(dev, port, &devres);
|
|
if ((devres & enable) != enable)
|
|
return;
|
|
mask = (devres >> 16) & 15;
|
|
base = devres & 0xffff;
|
|
size = 16;
|
|
for (;;) {
|
|
unsigned bit = size >> 1;
|
|
if ((bit & mask) == bit)
|
|
break;
|
|
size = bit;
|
|
}
|
|
/*
|
|
* For now we only print it out. Eventually we'll want to
|
|
* reserve it (at least if it's in the 0x1000+ range), but
|
|
* let's get enough confirmation reports first.
|
|
*/
|
|
base &= -size;
|
|
dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, base + size - 1);
|
|
}
|
|
|
|
static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable)
|
|
{
|
|
u32 devres;
|
|
u32 mask, size, base;
|
|
|
|
pci_read_config_dword(dev, port, &devres);
|
|
if ((devres & enable) != enable)
|
|
return;
|
|
base = devres & 0xffff0000;
|
|
mask = (devres & 0x3f) << 16;
|
|
size = 128 << 16;
|
|
for (;;) {
|
|
unsigned bit = size >> 1;
|
|
if ((bit & mask) == bit)
|
|
break;
|
|
size = bit;
|
|
}
|
|
/*
|
|
* For now we only print it out. Eventually we'll want to
|
|
* reserve it, but let's get enough confirmation reports first.
|
|
*/
|
|
base &= -size;
|
|
dev_info(&dev->dev, "%s MMIO at %04x-%04x\n", name, base, base + size - 1);
|
|
}
|
|
|
|
/*
|
|
* PIIX4 ACPI: Two IO regions pointed to by longwords at
|
|
* 0x40 (64 bytes of ACPI registers)
|
|
* 0x90 (16 bytes of SMB registers)
|
|
* and a few strange programmable PIIX4 device resources.
|
|
*/
|
|
static void __devinit quirk_piix4_acpi(struct pci_dev *dev)
|
|
{
|
|
u32 region, res_a;
|
|
|
|
pci_read_config_dword(dev, 0x40, ®ion);
|
|
quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI");
|
|
pci_read_config_dword(dev, 0x90, ®ion);
|
|
quirk_io_region(dev, region, 16, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB");
|
|
|
|
/* Device resource A has enables for some of the other ones */
|
|
pci_read_config_dword(dev, 0x5c, &res_a);
|
|
|
|
piix4_io_quirk(dev, "PIIX4 devres B", 0x60, 3 << 21);
|
|
piix4_io_quirk(dev, "PIIX4 devres C", 0x64, 3 << 21);
|
|
|
|
/* Device resource D is just bitfields for static resources */
|
|
|
|
/* Device 12 enabled? */
|
|
if (res_a & (1 << 29)) {
|
|
piix4_io_quirk(dev, "PIIX4 devres E", 0x68, 1 << 20);
|
|
piix4_mem_quirk(dev, "PIIX4 devres F", 0x6c, 1 << 7);
|
|
}
|
|
/* Device 13 enabled? */
|
|
if (res_a & (1 << 30)) {
|
|
piix4_io_quirk(dev, "PIIX4 devres G", 0x70, 1 << 20);
|
|
piix4_mem_quirk(dev, "PIIX4 devres H", 0x74, 1 << 7);
|
|
}
|
|
piix4_io_quirk(dev, "PIIX4 devres I", 0x78, 1 << 20);
|
|
piix4_io_quirk(dev, "PIIX4 devres J", 0x7c, 1 << 20);
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3, quirk_piix4_acpi);
|
|
|
|
#define ICH_PMBASE 0x40
|
|
#define ICH_ACPI_CNTL 0x44
|
|
#define ICH4_ACPI_EN 0x10
|
|
#define ICH6_ACPI_EN 0x80
|
|
#define ICH4_GPIOBASE 0x58
|
|
#define ICH4_GPIO_CNTL 0x5c
|
|
#define ICH4_GPIO_EN 0x10
|
|
#define ICH6_GPIOBASE 0x48
|
|
#define ICH6_GPIO_CNTL 0x4c
|
|
#define ICH6_GPIO_EN 0x10
|
|
|
|
/*
|
|
* ICH4, ICH4-M, ICH5, ICH5-M ACPI: Three IO regions pointed to by longwords at
|
|
* 0x40 (128 bytes of ACPI, GPIO & TCO registers)
|
|
* 0x58 (64 bytes of GPIO I/O space)
|
|
*/
|
|
static void __devinit quirk_ich4_lpc_acpi(struct pci_dev *dev)
|
|
{
|
|
u32 region;
|
|
u8 enable;
|
|
|
|
/*
|
|
* The check for PCIBIOS_MIN_IO is to ensure we won't create a conflict
|
|
* with low legacy (and fixed) ports. We don't know the decoding
|
|
* priority and can't tell whether the legacy device or the one created
|
|
* here is really at that address. This happens on boards with broken
|
|
* BIOSes.
|
|
*/
|
|
|
|
pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable);
|
|
if (enable & ICH4_ACPI_EN) {
|
|
pci_read_config_dword(dev, ICH_PMBASE, ®ion);
|
|
region &= PCI_BASE_ADDRESS_IO_MASK;
|
|
if (region >= PCIBIOS_MIN_IO)
|
|
quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES,
|
|
"ICH4 ACPI/GPIO/TCO");
|
|
}
|
|
|
|
pci_read_config_byte(dev, ICH4_GPIO_CNTL, &enable);
|
|
if (enable & ICH4_GPIO_EN) {
|
|
pci_read_config_dword(dev, ICH4_GPIOBASE, ®ion);
|
|
region &= PCI_BASE_ADDRESS_IO_MASK;
|
|
if (region >= PCIBIOS_MIN_IO)
|
|
quirk_io_region(dev, region, 64,
|
|
PCI_BRIDGE_RESOURCES + 1, "ICH4 GPIO");
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, quirk_ich4_lpc_acpi);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, quirk_ich4_lpc_acpi);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, quirk_ich4_lpc_acpi);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, quirk_ich4_lpc_acpi);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, quirk_ich4_lpc_acpi);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, quirk_ich4_lpc_acpi);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, quirk_ich4_lpc_acpi);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, quirk_ich4_lpc_acpi);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi);
|
|
|
|
static void __devinit ich6_lpc_acpi_gpio(struct pci_dev *dev)
|
|
{
|
|
u32 region;
|
|
u8 enable;
|
|
|
|
pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable);
|
|
if (enable & ICH6_ACPI_EN) {
|
|
pci_read_config_dword(dev, ICH_PMBASE, ®ion);
|
|
region &= PCI_BASE_ADDRESS_IO_MASK;
|
|
if (region >= PCIBIOS_MIN_IO)
|
|
quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES,
|
|
"ICH6 ACPI/GPIO/TCO");
|
|
}
|
|
|
|
pci_read_config_byte(dev, ICH6_GPIO_CNTL, &enable);
|
|
if (enable & ICH6_GPIO_EN) {
|
|
pci_read_config_dword(dev, ICH6_GPIOBASE, ®ion);
|
|
region &= PCI_BASE_ADDRESS_IO_MASK;
|
|
if (region >= PCIBIOS_MIN_IO)
|
|
quirk_io_region(dev, region, 64,
|
|
PCI_BRIDGE_RESOURCES + 1, "ICH6 GPIO");
|
|
}
|
|
}
|
|
|
|
static void __devinit ich6_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name, int dynsize)
|
|
{
|
|
u32 val;
|
|
u32 size, base;
|
|
|
|
pci_read_config_dword(dev, reg, &val);
|
|
|
|
/* Enabled? */
|
|
if (!(val & 1))
|
|
return;
|
|
base = val & 0xfffc;
|
|
if (dynsize) {
|
|
/*
|
|
* This is not correct. It is 16, 32 or 64 bytes depending on
|
|
* register D31:F0:ADh bits 5:4.
|
|
*
|
|
* But this gets us at least _part_ of it.
|
|
*/
|
|
size = 16;
|
|
} else {
|
|
size = 128;
|
|
}
|
|
base &= ~(size-1);
|
|
|
|
/* Just print it out for now. We should reserve it after more debugging */
|
|
dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, base+size-1);
|
|
}
|
|
|
|
static void __devinit quirk_ich6_lpc(struct pci_dev *dev)
|
|
{
|
|
/* Shared ACPI/GPIO decode with all ICH6+ */
|
|
ich6_lpc_acpi_gpio(dev);
|
|
|
|
/* ICH6-specific generic IO decode */
|
|
ich6_lpc_generic_decode(dev, 0x84, "LPC Generic IO decode 1", 0);
|
|
ich6_lpc_generic_decode(dev, 0x88, "LPC Generic IO decode 2", 1);
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, quirk_ich6_lpc);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc);
|
|
|
|
static void __devinit ich7_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name)
|
|
{
|
|
u32 val;
|
|
u32 mask, base;
|
|
|
|
pci_read_config_dword(dev, reg, &val);
|
|
|
|
/* Enabled? */
|
|
if (!(val & 1))
|
|
return;
|
|
|
|
/*
|
|
* IO base in bits 15:2, mask in bits 23:18, both
|
|
* are dword-based
|
|
*/
|
|
base = val & 0xfffc;
|
|
mask = (val >> 16) & 0xfc;
|
|
mask |= 3;
|
|
|
|
/* Just print it out for now. We should reserve it after more debugging */
|
|
dev_info(&dev->dev, "%s PIO at %04x (mask %04x)\n", name, base, mask);
|
|
}
|
|
|
|
/* ICH7-10 has the same common LPC generic IO decode registers */
|
|
static void __devinit quirk_ich7_lpc(struct pci_dev *dev)
|
|
{
|
|
/* We share the common ACPI/GPIO decode with ICH6 */
|
|
ich6_lpc_acpi_gpio(dev);
|
|
|
|
/* And have 4 ICH7+ generic decodes */
|
|
ich7_lpc_generic_decode(dev, 0x84, "ICH7 LPC Generic IO decode 1");
|
|
ich7_lpc_generic_decode(dev, 0x88, "ICH7 LPC Generic IO decode 2");
|
|
ich7_lpc_generic_decode(dev, 0x8c, "ICH7 LPC Generic IO decode 3");
|
|
ich7_lpc_generic_decode(dev, 0x90, "ICH7 LPC Generic IO decode 4");
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, quirk_ich7_lpc);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, quirk_ich7_lpc);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, quirk_ich7_lpc);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, quirk_ich7_lpc);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, quirk_ich7_lpc);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, quirk_ich7_lpc);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1, quirk_ich7_lpc);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4, quirk_ich7_lpc);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_2, quirk_ich7_lpc);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_4, quirk_ich7_lpc);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, quirk_ich7_lpc);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_8, quirk_ich7_lpc);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_1, quirk_ich7_lpc);
|
|
|
|
/*
|
|
* VIA ACPI: One IO region pointed to by longword at
|
|
* 0x48 or 0x20 (256 bytes of ACPI registers)
|
|
*/
|
|
static void __devinit quirk_vt82c586_acpi(struct pci_dev *dev)
|
|
{
|
|
u32 region;
|
|
|
|
if (dev->revision & 0x10) {
|
|
pci_read_config_dword(dev, 0x48, ®ion);
|
|
region &= PCI_BASE_ADDRESS_IO_MASK;
|
|
quirk_io_region(dev, region, 256, PCI_BRIDGE_RESOURCES, "vt82c586 ACPI");
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_vt82c586_acpi);
|
|
|
|
/*
|
|
* VIA VT82C686 ACPI: Three IO region pointed to by (long)words at
|
|
* 0x48 (256 bytes of ACPI registers)
|
|
* 0x70 (128 bytes of hardware monitoring register)
|
|
* 0x90 (16 bytes of SMB registers)
|
|
*/
|
|
static void __devinit quirk_vt82c686_acpi(struct pci_dev *dev)
|
|
{
|
|
u16 hm;
|
|
u32 smb;
|
|
|
|
quirk_vt82c586_acpi(dev);
|
|
|
|
pci_read_config_word(dev, 0x70, &hm);
|
|
hm &= PCI_BASE_ADDRESS_IO_MASK;
|
|
quirk_io_region(dev, hm, 128, PCI_BRIDGE_RESOURCES + 1, "vt82c686 HW-mon");
|
|
|
|
pci_read_config_dword(dev, 0x90, &smb);
|
|
smb &= PCI_BASE_ADDRESS_IO_MASK;
|
|
quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 2, "vt82c686 SMB");
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt82c686_acpi);
|
|
|
|
/*
|
|
* VIA VT8235 ISA Bridge: Two IO regions pointed to by words at
|
|
* 0x88 (128 bytes of power management registers)
|
|
* 0xd0 (16 bytes of SMB registers)
|
|
*/
|
|
static void __devinit quirk_vt8235_acpi(struct pci_dev *dev)
|
|
{
|
|
u16 pm, smb;
|
|
|
|
pci_read_config_word(dev, 0x88, &pm);
|
|
pm &= PCI_BASE_ADDRESS_IO_MASK;
|
|
quirk_io_region(dev, pm, 128, PCI_BRIDGE_RESOURCES, "vt8235 PM");
|
|
|
|
pci_read_config_word(dev, 0xd0, &smb);
|
|
smb &= PCI_BASE_ADDRESS_IO_MASK;
|
|
quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 1, "vt8235 SMB");
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi);
|
|
|
|
/*
|
|
* TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast back-to-back:
|
|
* Disable fast back-to-back on the secondary bus segment
|
|
*/
|
|
static void __devinit quirk_xio2000a(struct pci_dev *dev)
|
|
{
|
|
struct pci_dev *pdev;
|
|
u16 command;
|
|
|
|
dev_warn(&dev->dev, "TI XIO2000a quirk detected; "
|
|
"secondary bus fast back-to-back transfers disabled\n");
|
|
list_for_each_entry(pdev, &dev->subordinate->devices, bus_list) {
|
|
pci_read_config_word(pdev, PCI_COMMAND, &command);
|
|
if (command & PCI_COMMAND_FAST_BACK)
|
|
pci_write_config_word(pdev, PCI_COMMAND, command & ~PCI_COMMAND_FAST_BACK);
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2000A,
|
|
quirk_xio2000a);
|
|
|
|
#ifdef CONFIG_X86_IO_APIC
|
|
|
|
#include <asm/io_apic.h>
|
|
|
|
/*
|
|
* VIA 686A/B: If an IO-APIC is active, we need to route all on-chip
|
|
* devices to the external APIC.
|
|
*
|
|
* TODO: When we have device-specific interrupt routers,
|
|
* this code will go away from quirks.
|
|
*/
|
|
static void quirk_via_ioapic(struct pci_dev *dev)
|
|
{
|
|
u8 tmp;
|
|
|
|
if (nr_ioapics < 1)
|
|
tmp = 0; /* nothing routed to external APIC */
|
|
else
|
|
tmp = 0x1f; /* all known bits (4-0) routed to external APIC */
|
|
|
|
dev_info(&dev->dev, "%sbling VIA external APIC routing\n",
|
|
tmp == 0 ? "Disa" : "Ena");
|
|
|
|
/* Offset 0x58: External APIC IRQ output control */
|
|
pci_write_config_byte (dev, 0x58, tmp);
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic);
|
|
|
|
/*
|
|
* VIA 8237: Some BIOSs don't set the 'Bypass APIC De-Assert Message' Bit.
|
|
* This leads to doubled level interrupt rates.
|
|
* Set this bit to get rid of cycle wastage.
|
|
* Otherwise uncritical.
|
|
*/
|
|
static void quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev)
|
|
{
|
|
u8 misc_control2;
|
|
#define BYPASS_APIC_DEASSERT 8
|
|
|
|
pci_read_config_byte(dev, 0x5B, &misc_control2);
|
|
if (!(misc_control2 & BYPASS_APIC_DEASSERT)) {
|
|
dev_info(&dev->dev, "Bypassing VIA 8237 APIC De-Assert Message\n");
|
|
pci_write_config_byte(dev, 0x5B, misc_control2|BYPASS_APIC_DEASSERT);
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert);
|
|
|
|
/*
|
|
* The AMD io apic can hang the box when an apic irq is masked.
|
|
* We check all revs >= B0 (yet not in the pre production!) as the bug
|
|
* is currently marked NoFix
|
|
*
|
|
* We have multiple reports of hangs with this chipset that went away with
|
|
* noapic specified. For the moment we assume it's the erratum. We may be wrong
|
|
* of course. However the advice is demonstrably good even if so..
|
|
*/
|
|
static void __devinit quirk_amd_ioapic(struct pci_dev *dev)
|
|
{
|
|
if (dev->revision >= 0x02) {
|
|
dev_warn(&dev->dev, "I/O APIC: AMD Erratum #22 may be present. In the event of instability try\n");
|
|
dev_warn(&dev->dev, " : booting with the \"noapic\" option\n");
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_amd_ioapic);
|
|
|
|
static void __init quirk_ioapic_rmw(struct pci_dev *dev)
|
|
{
|
|
if (dev->devfn == 0 && dev->bus->number == 0)
|
|
sis_apic_bug = 1;
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_ANY_ID, quirk_ioapic_rmw);
|
|
#endif /* CONFIG_X86_IO_APIC */
|
|
|
|
/*
|
|
* Some settings of MMRBC can lead to data corruption so block changes.
|
|
* See AMD 8131 HyperTransport PCI-X Tunnel Revision Guide
|
|
*/
|
|
static void __init quirk_amd_8131_mmrbc(struct pci_dev *dev)
|
|
{
|
|
if (dev->subordinate && dev->revision <= 0x12) {
|
|
dev_info(&dev->dev, "AMD8131 rev %x detected; "
|
|
"disabling PCI-X MMRBC\n", dev->revision);
|
|
dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MMRBC;
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_mmrbc);
|
|
|
|
/*
|
|
* FIXME: it is questionable that quirk_via_acpi
|
|
* is needed. It shows up as an ISA bridge, and does not
|
|
* support the PCI_INTERRUPT_LINE register at all. Therefore
|
|
* it seems like setting the pci_dev's 'irq' to the
|
|
* value of the ACPI SCI interrupt is only done for convenience.
|
|
* -jgarzik
|
|
*/
|
|
static void __devinit quirk_via_acpi(struct pci_dev *d)
|
|
{
|
|
/*
|
|
* VIA ACPI device: SCI IRQ line in PCI config byte 0x42
|
|
*/
|
|
u8 irq;
|
|
pci_read_config_byte(d, 0x42, &irq);
|
|
irq &= 0xf;
|
|
if (irq && (irq != 2))
|
|
d->irq = irq;
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi);
|
|
|
|
|
|
/*
|
|
* VIA bridges which have VLink
|
|
*/
|
|
|
|
static int via_vlink_dev_lo = -1, via_vlink_dev_hi = 18;
|
|
|
|
static void quirk_via_bridge(struct pci_dev *dev)
|
|
{
|
|
/* See what bridge we have and find the device ranges */
|
|
switch (dev->device) {
|
|
case PCI_DEVICE_ID_VIA_82C686:
|
|
/* The VT82C686 is special, it attaches to PCI and can have
|
|
any device number. All its subdevices are functions of
|
|
that single device. */
|
|
via_vlink_dev_lo = PCI_SLOT(dev->devfn);
|
|
via_vlink_dev_hi = PCI_SLOT(dev->devfn);
|
|
break;
|
|
case PCI_DEVICE_ID_VIA_8237:
|
|
case PCI_DEVICE_ID_VIA_8237A:
|
|
via_vlink_dev_lo = 15;
|
|
break;
|
|
case PCI_DEVICE_ID_VIA_8235:
|
|
via_vlink_dev_lo = 16;
|
|
break;
|
|
case PCI_DEVICE_ID_VIA_8231:
|
|
case PCI_DEVICE_ID_VIA_8233_0:
|
|
case PCI_DEVICE_ID_VIA_8233A:
|
|
case PCI_DEVICE_ID_VIA_8233C_0:
|
|
via_vlink_dev_lo = 17;
|
|
break;
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_bridge);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, quirk_via_bridge);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_0, quirk_via_bridge);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233A, quirk_via_bridge);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233C_0, quirk_via_bridge);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_bridge);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_bridge);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237A, quirk_via_bridge);
|
|
|
|
/**
|
|
* quirk_via_vlink - VIA VLink IRQ number update
|
|
* @dev: PCI device
|
|
*
|
|
* If the device we are dealing with is on a PIC IRQ we need to
|
|
* ensure that the IRQ line register which usually is not relevant
|
|
* for PCI cards, is actually written so that interrupts get sent
|
|
* to the right place.
|
|
* We only do this on systems where a VIA south bridge was detected,
|
|
* and only for VIA devices on the motherboard (see quirk_via_bridge
|
|
* above).
|
|
*/
|
|
|
|
static void quirk_via_vlink(struct pci_dev *dev)
|
|
{
|
|
u8 irq, new_irq;
|
|
|
|
/* Check if we have VLink at all */
|
|
if (via_vlink_dev_lo == -1)
|
|
return;
|
|
|
|
new_irq = dev->irq;
|
|
|
|
/* Don't quirk interrupts outside the legacy IRQ range */
|
|
if (!new_irq || new_irq > 15)
|
|
return;
|
|
|
|
/* Internal device ? */
|
|
if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) > via_vlink_dev_hi ||
|
|
PCI_SLOT(dev->devfn) < via_vlink_dev_lo)
|
|
return;
|
|
|
|
/* This is an internal VLink device on a PIC interrupt. The BIOS
|
|
ought to have set this but may not have, so we redo it */
|
|
|
|
pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
|
|
if (new_irq != irq) {
|
|
dev_info(&dev->dev, "VIA VLink IRQ fixup, from %d to %d\n",
|
|
irq, new_irq);
|
|
udelay(15); /* unknown if delay really needed */
|
|
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_vlink);
|
|
|
|
/*
|
|
* VIA VT82C598 has its device ID settable and many BIOSes
|
|
* set it to the ID of VT82C597 for backward compatibility.
|
|
* We need to switch it off to be able to recognize the real
|
|
* type of the chip.
|
|
*/
|
|
static void __devinit quirk_vt82c598_id(struct pci_dev *dev)
|
|
{
|
|
pci_write_config_byte(dev, 0xfc, 0);
|
|
pci_read_config_word(dev, PCI_DEVICE_ID, &dev->device);
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id);
|
|
|
|
/*
|
|
* CardBus controllers have a legacy base address that enables them
|
|
* to respond as i82365 pcmcia controllers. We don't want them to
|
|
* do this even if the Linux CardBus driver is not loaded, because
|
|
* the Linux i82365 driver does not (and should not) handle CardBus.
|
|
*/
|
|
static void quirk_cardbus_legacy(struct pci_dev *dev)
|
|
{
|
|
pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0);
|
|
}
|
|
DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy);
|
|
DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy);
|
|
|
|
/*
|
|
* Following the PCI ordering rules is optional on the AMD762. I'm not
|
|
* sure what the designers were smoking but let's not inhale...
|
|
*
|
|
* To be fair to AMD, it follows the spec by default, its BIOS people
|
|
* who turn it off!
|
|
*/
|
|
static void quirk_amd_ordering(struct pci_dev *dev)
|
|
{
|
|
u32 pcic;
|
|
pci_read_config_dword(dev, 0x4C, &pcic);
|
|
if ((pcic&6)!=6) {
|
|
pcic |= 6;
|
|
dev_warn(&dev->dev, "BIOS failed to enable PCI standards compliance; fixing this error\n");
|
|
pci_write_config_dword(dev, 0x4C, pcic);
|
|
pci_read_config_dword(dev, 0x84, &pcic);
|
|
pcic |= (1<<23); /* Required in this mode */
|
|
pci_write_config_dword(dev, 0x84, pcic);
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering);
|
|
|
|
/*
|
|
* DreamWorks provided workaround for Dunord I-3000 problem
|
|
*
|
|
* This card decodes and responds to addresses not apparently
|
|
* assigned to it. We force a larger allocation to ensure that
|
|
* nothing gets put too close to it.
|
|
*/
|
|
static void __devinit quirk_dunord ( struct pci_dev * dev )
|
|
{
|
|
struct resource *r = &dev->resource [1];
|
|
r->start = 0;
|
|
r->end = 0xffffff;
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DUNORD, PCI_DEVICE_ID_DUNORD_I3000, quirk_dunord);
|
|
|
|
/*
|
|
* i82380FB mobile docking controller: its PCI-to-PCI bridge
|
|
* is subtractive decoding (transparent), and does indicate this
|
|
* in the ProgIf. Unfortunately, the ProgIf value is wrong - 0x80
|
|
* instead of 0x01.
|
|
*/
|
|
static void __devinit quirk_transparent_bridge(struct pci_dev *dev)
|
|
{
|
|
dev->transparent = 1;
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82380FB, quirk_transparent_bridge);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge);
|
|
|
|
/*
|
|
* Common misconfiguration of the MediaGX/Geode PCI master that will
|
|
* reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1
|
|
* datasheets found at http://www.national.com/analog for info on what
|
|
* these bits do. <christer@weinigel.se>
|
|
*/
|
|
static void quirk_mediagx_master(struct pci_dev *dev)
|
|
{
|
|
u8 reg;
|
|
pci_read_config_byte(dev, 0x41, ®);
|
|
if (reg & 2) {
|
|
reg &= ~2;
|
|
dev_info(&dev->dev, "Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x%02x)\n", reg);
|
|
pci_write_config_byte(dev, 0x41, reg);
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master);
|
|
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master);
|
|
|
|
/*
|
|
* Ensure C0 rev restreaming is off. This is normally done by
|
|
* the BIOS but in the odd case it is not the results are corruption
|
|
* hence the presence of a Linux check
|
|
*/
|
|
static void quirk_disable_pxb(struct pci_dev *pdev)
|
|
{
|
|
u16 config;
|
|
|
|
if (pdev->revision != 0x04) /* Only C0 requires this */
|
|
return;
|
|
pci_read_config_word(pdev, 0x40, &config);
|
|
if (config & (1<<6)) {
|
|
config &= ~(1<<6);
|
|
pci_write_config_word(pdev, 0x40, config);
|
|
dev_info(&pdev->dev, "C0 revision 450NX. Disabling PCI restreaming\n");
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb);
|
|
|
|
static void __devinit quirk_amd_ide_mode(struct pci_dev *pdev)
|
|
{
|
|
/* set SBX00/Hudson-2 SATA in IDE mode to AHCI mode */
|
|
u8 tmp;
|
|
|
|
pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &tmp);
|
|
if (tmp == 0x01) {
|
|
pci_read_config_byte(pdev, 0x40, &tmp);
|
|
pci_write_config_byte(pdev, 0x40, tmp|1);
|
|
pci_write_config_byte(pdev, 0x9, 1);
|
|
pci_write_config_byte(pdev, 0xa, 6);
|
|
pci_write_config_byte(pdev, 0x40, tmp);
|
|
|
|
pdev->class = PCI_CLASS_STORAGE_SATA_AHCI;
|
|
dev_info(&pdev->dev, "set SATA to AHCI mode\n");
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode);
|
|
|
|
/*
|
|
* Serverworks CSB5 IDE does not fully support native mode
|
|
*/
|
|
static void __devinit quirk_svwks_csb5ide(struct pci_dev *pdev)
|
|
{
|
|
u8 prog;
|
|
pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
|
|
if (prog & 5) {
|
|
prog &= ~5;
|
|
pdev->class &= ~5;
|
|
pci_write_config_byte(pdev, PCI_CLASS_PROG, prog);
|
|
/* PCI layer will sort out resources */
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide);
|
|
|
|
/*
|
|
* Intel 82801CAM ICH3-M datasheet says IDE modes must be the same
|
|
*/
|
|
static void __init quirk_ide_samemode(struct pci_dev *pdev)
|
|
{
|
|
u8 prog;
|
|
|
|
pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
|
|
|
|
if (((prog & 1) && !(prog & 4)) || ((prog & 4) && !(prog & 1))) {
|
|
dev_info(&pdev->dev, "IDE mode mismatch; forcing legacy mode\n");
|
|
prog &= ~5;
|
|
pdev->class &= ~5;
|
|
pci_write_config_byte(pdev, PCI_CLASS_PROG, prog);
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode);
|
|
|
|
/*
|
|
* Some ATA devices break if put into D3
|
|
*/
|
|
|
|
static void __devinit quirk_no_ata_d3(struct pci_dev *pdev)
|
|
{
|
|
pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
|
|
}
|
|
/* Quirk the legacy ATA devices only. The AHCI ones are ok */
|
|
DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID,
|
|
PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
|
|
DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID,
|
|
PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
|
|
/* ALi loses some register settings that we cannot then restore */
|
|
DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID,
|
|
PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
|
|
/* VIA comes back fine but we need to keep it alive or ACPI GTM failures
|
|
occur when mode detecting */
|
|
DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID,
|
|
PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
|
|
|
|
/* This was originally an Alpha specific thing, but it really fits here.
|
|
* The i82375 PCI/EISA bridge appears as non-classified. Fix that.
|
|
*/
|
|
static void __init quirk_eisa_bridge(struct pci_dev *dev)
|
|
{
|
|
dev->class = PCI_CLASS_BRIDGE_EISA << 8;
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_eisa_bridge);
|
|
|
|
|
|
/*
|
|
* On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge
|
|
* is not activated. The myth is that Asus said that they do not want the
|
|
* users to be irritated by just another PCI Device in the Win98 device
|
|
* manager. (see the file prog/hotplug/README.p4b in the lm_sensors
|
|
* package 2.7.0 for details)
|
|
*
|
|
* The SMBus PCI Device can be activated by setting a bit in the ICH LPC
|
|
* bridge. Unfortunately, this device has no subvendor/subdevice ID. So it
|
|
* becomes necessary to do this tweak in two steps -- the chosen trigger
|
|
* is either the Host bridge (preferred) or on-board VGA controller.
|
|
*
|
|
* Note that we used to unhide the SMBus that way on Toshiba laptops
|
|
* (Satellite A40 and Tecra M2) but then found that the thermal management
|
|
* was done by SMM code, which could cause unsynchronized concurrent
|
|
* accesses to the SMBus registers, with potentially bad effects. Thus you
|
|
* should be very careful when adding new entries: if SMM is accessing the
|
|
* Intel SMBus, this is a very good reason to leave it hidden.
|
|
*
|
|
* Likewise, many recent laptops use ACPI for thermal management. If the
|
|
* ACPI DSDT code accesses the SMBus, then Linux should not access it
|
|
* natively, and keeping the SMBus hidden is the right thing to do. If you
|
|
* are about to add an entry in the table below, please first disassemble
|
|
* the DSDT and double-check that there is no code accessing the SMBus.
|
|
*/
|
|
static int asus_hides_smbus;
|
|
|
|
static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)
|
|
{
|
|
if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) {
|
|
if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB)
|
|
switch(dev->subsystem_device) {
|
|
case 0x8025: /* P4B-LX */
|
|
case 0x8070: /* P4B */
|
|
case 0x8088: /* P4B533 */
|
|
case 0x1626: /* L3C notebook */
|
|
asus_hides_smbus = 1;
|
|
}
|
|
else if (dev->device == PCI_DEVICE_ID_INTEL_82845G_HB)
|
|
switch(dev->subsystem_device) {
|
|
case 0x80b1: /* P4GE-V */
|
|
case 0x80b2: /* P4PE */
|
|
case 0x8093: /* P4B533-V */
|
|
asus_hides_smbus = 1;
|
|
}
|
|
else if (dev->device == PCI_DEVICE_ID_INTEL_82850_HB)
|
|
switch(dev->subsystem_device) {
|
|
case 0x8030: /* P4T533 */
|
|
asus_hides_smbus = 1;
|
|
}
|
|
else if (dev->device == PCI_DEVICE_ID_INTEL_7205_0)
|
|
switch (dev->subsystem_device) {
|
|
case 0x8070: /* P4G8X Deluxe */
|
|
asus_hides_smbus = 1;
|
|
}
|
|
else if (dev->device == PCI_DEVICE_ID_INTEL_E7501_MCH)
|
|
switch (dev->subsystem_device) {
|
|
case 0x80c9: /* PU-DLS */
|
|
asus_hides_smbus = 1;
|
|
}
|
|
else if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB)
|
|
switch (dev->subsystem_device) {
|
|
case 0x1751: /* M2N notebook */
|
|
case 0x1821: /* M5N notebook */
|
|
case 0x1897: /* A6L notebook */
|
|
asus_hides_smbus = 1;
|
|
}
|
|
else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
|
|
switch (dev->subsystem_device) {
|
|
case 0x184b: /* W1N notebook */
|
|
case 0x186a: /* M6Ne notebook */
|
|
asus_hides_smbus = 1;
|
|
}
|
|
else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB)
|
|
switch (dev->subsystem_device) {
|
|
case 0x80f2: /* P4P800-X */
|
|
asus_hides_smbus = 1;
|
|
}
|
|
else if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB)
|
|
switch (dev->subsystem_device) {
|
|
case 0x1882: /* M6V notebook */
|
|
case 0x1977: /* A6VA notebook */
|
|
asus_hides_smbus = 1;
|
|
}
|
|
} else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_HP)) {
|
|
if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
|
|
switch(dev->subsystem_device) {
|
|
case 0x088C: /* HP Compaq nc8000 */
|
|
case 0x0890: /* HP Compaq nc6000 */
|
|
asus_hides_smbus = 1;
|
|
}
|
|
else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB)
|
|
switch (dev->subsystem_device) {
|
|
case 0x12bc: /* HP D330L */
|
|
case 0x12bd: /* HP D530 */
|
|
case 0x006a: /* HP Compaq nx9500 */
|
|
asus_hides_smbus = 1;
|
|
}
|
|
else if (dev->device == PCI_DEVICE_ID_INTEL_82875_HB)
|
|
switch (dev->subsystem_device) {
|
|
case 0x12bf: /* HP xw4100 */
|
|
asus_hides_smbus = 1;
|
|
}
|
|
} else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) {
|
|
if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
|
|
switch(dev->subsystem_device) {
|
|
case 0xC00C: /* Samsung P35 notebook */
|
|
asus_hides_smbus = 1;
|
|
}
|
|
} else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ)) {
|
|
if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
|
|
switch(dev->subsystem_device) {
|
|
case 0x0058: /* Compaq Evo N620c */
|
|
asus_hides_smbus = 1;
|
|
}
|
|
else if (dev->device == PCI_DEVICE_ID_INTEL_82810_IG3)
|
|
switch(dev->subsystem_device) {
|
|
case 0xB16C: /* Compaq Deskpro EP 401963-001 (PCA# 010174) */
|
|
/* Motherboard doesn't have Host bridge
|
|
* subvendor/subdevice IDs, therefore checking
|
|
* its on-board VGA controller */
|
|
asus_hides_smbus = 1;
|
|
}
|
|
else if (dev->device == PCI_DEVICE_ID_INTEL_82801DB_2)
|
|
switch(dev->subsystem_device) {
|
|
case 0x00b8: /* Compaq Evo D510 CMT */
|
|
case 0x00b9: /* Compaq Evo D510 SFF */
|
|
case 0x00ba: /* Compaq Evo D510 USDT */
|
|
/* Motherboard doesn't have Host bridge
|
|
* subvendor/subdevice IDs and on-board VGA
|
|
* controller is disabled if an AGP card is
|
|
* inserted, therefore checking USB UHCI
|
|
* Controller #1 */
|
|
asus_hides_smbus = 1;
|
|
}
|
|
else if (dev->device == PCI_DEVICE_ID_INTEL_82815_CGC)
|
|
switch (dev->subsystem_device) {
|
|
case 0x001A: /* Compaq Deskpro EN SSF P667 815E */
|
|
/* Motherboard doesn't have host bridge
|
|
* subvendor/subdevice IDs, therefore checking
|
|
* its on-board VGA controller */
|
|
asus_hides_smbus = 1;
|
|
}
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_HB, asus_hides_smbus_hostbridge);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82850_HB, asus_hides_smbus_hostbridge);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, asus_hides_smbus_hostbridge);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, asus_hides_smbus_hostbridge);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_7205_0, asus_hides_smbus_hostbridge);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7501_MCH, asus_hides_smbus_hostbridge);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855PM_HB, asus_hides_smbus_hostbridge);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge);
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3, asus_hides_smbus_hostbridge);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_2, asus_hides_smbus_hostbridge);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_CGC, asus_hides_smbus_hostbridge);
|
|
|
|
static void asus_hides_smbus_lpc(struct pci_dev *dev)
|
|
{
|
|
u16 val;
|
|
|
|
if (likely(!asus_hides_smbus))
|
|
return;
|
|
|
|
pci_read_config_word(dev, 0xF2, &val);
|
|
if (val & 0x8) {
|
|
pci_write_config_word(dev, 0xF2, val & (~0x8));
|
|
pci_read_config_word(dev, 0xF2, &val);
|
|
if (val & 0x8)
|
|
dev_info(&dev->dev, "i801 SMBus device continues to play 'hide and seek'! 0x%x\n", val);
|
|
else
|
|
dev_info(&dev->dev, "Enabled i801 SMBus device\n");
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc);
|
|
|
|
/* It appears we just have one such device. If not, we have a warning */
|
|
static void __iomem *asus_rcba_base;
|
|
static void asus_hides_smbus_lpc_ich6_suspend(struct pci_dev *dev)
|
|
{
|
|
u32 rcba;
|
|
|
|
if (likely(!asus_hides_smbus))
|
|
return;
|
|
WARN_ON(asus_rcba_base);
|
|
|
|
pci_read_config_dword(dev, 0xF0, &rcba);
|
|
/* use bits 31:14, 16 kB aligned */
|
|
asus_rcba_base = ioremap_nocache(rcba & 0xFFFFC000, 0x4000);
|
|
if (asus_rcba_base == NULL)
|
|
return;
|
|
}
|
|
|
|
static void asus_hides_smbus_lpc_ich6_resume_early(struct pci_dev *dev)
|
|
{
|
|
u32 val;
|
|
|
|
if (likely(!asus_hides_smbus || !asus_rcba_base))
|
|
return;
|
|
/* read the Function Disable register, dword mode only */
|
|
val = readl(asus_rcba_base + 0x3418);
|
|
writel(val & 0xFFFFFFF7, asus_rcba_base + 0x3418); /* enable the SMBus device */
|
|
}
|
|
|
|
static void asus_hides_smbus_lpc_ich6_resume(struct pci_dev *dev)
|
|
{
|
|
if (likely(!asus_hides_smbus || !asus_rcba_base))
|
|
return;
|
|
iounmap(asus_rcba_base);
|
|
asus_rcba_base = NULL;
|
|
dev_info(&dev->dev, "Enabled ICH6/i801 SMBus device\n");
|
|
}
|
|
|
|
static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
|
|
{
|
|
asus_hides_smbus_lpc_ich6_suspend(dev);
|
|
asus_hides_smbus_lpc_ich6_resume_early(dev);
|
|
asus_hides_smbus_lpc_ich6_resume(dev);
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6);
|
|
DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_suspend);
|
|
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume_early);
|
|
|
|
/*
|
|
* SiS 96x south bridge: BIOS typically hides SMBus device...
|
|
*/
|
|
static void quirk_sis_96x_smbus(struct pci_dev *dev)
|
|
{
|
|
u8 val = 0;
|
|
pci_read_config_byte(dev, 0x77, &val);
|
|
if (val & 0x10) {
|
|
dev_info(&dev->dev, "Enabling SiS 96x SMBus\n");
|
|
pci_write_config_byte(dev, 0x77, val & ~0x10);
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus);
|
|
|
|
/*
|
|
* ... This is further complicated by the fact that some SiS96x south
|
|
* bridges pretend to be 85C503/5513 instead. In that case see if we
|
|
* spotted a compatible north bridge to make sure.
|
|
* (pci_find_device doesn't work yet)
|
|
*
|
|
* We can also enable the sis96x bit in the discovery register..
|
|
*/
|
|
#define SIS_DETECT_REGISTER 0x40
|
|
|
|
static void quirk_sis_503(struct pci_dev *dev)
|
|
{
|
|
u8 reg;
|
|
u16 devid;
|
|
|
|
pci_read_config_byte(dev, SIS_DETECT_REGISTER, ®);
|
|
pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg | (1 << 6));
|
|
pci_read_config_word(dev, PCI_DEVICE_ID, &devid);
|
|
if (((devid & 0xfff0) != 0x0960) && (devid != 0x0018)) {
|
|
pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Ok, it now shows up as a 96x.. run the 96x quirk by
|
|
* hand in case it has already been processed.
|
|
* (depends on link order, which is apparently not guaranteed)
|
|
*/
|
|
dev->device = devid;
|
|
quirk_sis_96x_smbus(dev);
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503);
|
|
|
|
|
|
/*
|
|
* On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller
|
|
* and MC97 modem controller are disabled when a second PCI soundcard is
|
|
* present. This patch, tweaking the VT8237 ISA bridge, enables them.
|
|
* -- bjd
|
|
*/
|
|
static void asus_hides_ac97_lpc(struct pci_dev *dev)
|
|
{
|
|
u8 val;
|
|
int asus_hides_ac97 = 0;
|
|
|
|
if (likely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) {
|
|
if (dev->device == PCI_DEVICE_ID_VIA_8237)
|
|
asus_hides_ac97 = 1;
|
|
}
|
|
|
|
if (!asus_hides_ac97)
|
|
return;
|
|
|
|
pci_read_config_byte(dev, 0x50, &val);
|
|
if (val & 0xc0) {
|
|
pci_write_config_byte(dev, 0x50, val & (~0xc0));
|
|
pci_read_config_byte(dev, 0x50, &val);
|
|
if (val & 0xc0)
|
|
dev_info(&dev->dev, "Onboard AC97/MC97 devices continue to play 'hide and seek'! 0x%x\n", val);
|
|
else
|
|
dev_info(&dev->dev, "Enabled onboard AC97/MC97 devices\n");
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc);
|
|
|
|
#if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE)
|
|
|
|
/*
|
|
* If we are using libata we can drive this chip properly but must
|
|
* do this early on to make the additional device appear during
|
|
* the PCI scanning.
|
|
*/
|
|
static void quirk_jmicron_ata(struct pci_dev *pdev)
|
|
{
|
|
u32 conf1, conf5, class;
|
|
u8 hdr;
|
|
|
|
/* Only poke fn 0 */
|
|
if (PCI_FUNC(pdev->devfn))
|
|
return;
|
|
|
|
pci_read_config_dword(pdev, 0x40, &conf1);
|
|
pci_read_config_dword(pdev, 0x80, &conf5);
|
|
|
|
conf1 &= ~0x00CFF302; /* Clear bit 1, 8, 9, 12-19, 22, 23 */
|
|
conf5 &= ~(1 << 24); /* Clear bit 24 */
|
|
|
|
switch (pdev->device) {
|
|
case PCI_DEVICE_ID_JMICRON_JMB360: /* SATA single port */
|
|
case PCI_DEVICE_ID_JMICRON_JMB362: /* SATA dual ports */
|
|
case PCI_DEVICE_ID_JMICRON_JMB364: /* SATA dual ports */
|
|
/* The controller should be in single function ahci mode */
|
|
conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */
|
|
break;
|
|
|
|
case PCI_DEVICE_ID_JMICRON_JMB365:
|
|
case PCI_DEVICE_ID_JMICRON_JMB366:
|
|
/* Redirect IDE second PATA port to the right spot */
|
|
conf5 |= (1 << 24);
|
|
/* Fall through */
|
|
case PCI_DEVICE_ID_JMICRON_JMB361:
|
|
case PCI_DEVICE_ID_JMICRON_JMB363:
|
|
case PCI_DEVICE_ID_JMICRON_JMB369:
|
|
/* Enable dual function mode, AHCI on fn 0, IDE fn1 */
|
|
/* Set the class codes correctly and then direct IDE 0 */
|
|
conf1 |= 0x00C2A1B3; /* Set 0, 1, 4, 5, 7, 8, 13, 15, 17, 22, 23 */
|
|
break;
|
|
|
|
case PCI_DEVICE_ID_JMICRON_JMB368:
|
|
/* The controller should be in single function IDE mode */
|
|
conf1 |= 0x00C00000; /* Set 22, 23 */
|
|
break;
|
|
}
|
|
|
|
pci_write_config_dword(pdev, 0x40, conf1);
|
|
pci_write_config_dword(pdev, 0x80, conf5);
|
|
|
|
/* Update pdev accordingly */
|
|
pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr);
|
|
pdev->hdr_type = hdr & 0x7f;
|
|
pdev->multifunction = !!(hdr & 0x80);
|
|
|
|
pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class);
|
|
pdev->class = class >> 8;
|
|
}
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata);
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_X86_IO_APIC
|
|
static void __init quirk_alder_ioapic(struct pci_dev *pdev)
|
|
{
|
|
int i;
|
|
|
|
if ((pdev->class >> 8) != 0xff00)
|
|
return;
|
|
|
|
/* the first BAR is the location of the IO APIC...we must
|
|
* not touch this (and it's already covered by the fixmap), so
|
|
* forcibly insert it into the resource tree */
|
|
if (pci_resource_start(pdev, 0) && pci_resource_len(pdev, 0))
|
|
insert_resource(&iomem_resource, &pdev->resource[0]);
|
|
|
|
/* The next five BARs all seem to be rubbish, so just clean
|
|
* them out */
|
|
for (i=1; i < 6; i++) {
|
|
memset(&pdev->resource[i], 0, sizeof(pdev->resource[i]));
|
|
}
|
|
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic);
|
|
#endif
|
|
|
|
static void __devinit quirk_pcie_mch(struct pci_dev *pdev)
|
|
{
|
|
pci_msi_off(pdev);
|
|
pdev->no_msi = 1;
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_pcie_mch);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch);
|
|
|
|
|
|
/*
|
|
* It's possible for the MSI to get corrupted if shpc and acpi
|
|
* are used together on certain PXH-based systems.
|
|
*/
|
|
static void __devinit quirk_pcie_pxh(struct pci_dev *dev)
|
|
{
|
|
pci_msi_off(dev);
|
|
dev->no_msi = 1;
|
|
dev_warn(&dev->dev, "PXH quirk detected; SHPC device MSI disabled\n");
|
|
}
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_0, quirk_pcie_pxh);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_1, quirk_pcie_pxh);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pcie_pxh);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh);
|
|
|
|
/*
|
|
* Some Intel PCI Express chipsets have trouble with downstream
|
|
* device power management.
|
|
*/
|
|
static void quirk_intel_pcie_pm(struct pci_dev * dev)
|
|
{
|
|
pci_pm_d3_delay = 120;
|
|
dev->no_d1d2 = 1;
|
|
}
|
|
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_pcie_pm);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_pcie_pm);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_pcie_pm);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_pcie_pm);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_pcie_pm);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_pcie_pm);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_pcie_pm);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_pcie_pm);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_pcie_pm);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_pcie_pm);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2601, quirk_intel_pcie_pm);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2602, quirk_intel_pcie_pm);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2603, quirk_intel_pcie_pm);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2604, quirk_intel_pcie_pm);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2605, quirk_intel_pcie_pm);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2606, quirk_intel_pcie_pm);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2607, quirk_intel_pcie_pm);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2608, quirk_intel_pcie_pm);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm);
|
|
|
|
#ifdef CONFIG_X86_IO_APIC
|
|
/*
|
|
* Boot interrupts on some chipsets cannot be turned off. For these chipsets,
|
|
* remap the original interrupt in the linux kernel to the boot interrupt, so
|
|
* that a PCI device's interrupt handler is installed on the boot interrupt
|
|
* line instead.
|
|
*/
|
|
static void quirk_reroute_to_boot_interrupts_intel(struct pci_dev *dev)
|
|
{
|
|
if (noioapicquirk || noioapicreroute)
|
|
return;
|
|
|
|
dev->irq_reroute_variant = INTEL_IRQ_REROUTE_VARIANT;
|
|
dev_info(&dev->dev, "rerouting interrupts for [%04x:%04x]\n",
|
|
dev->vendor, dev->device);
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel);
|
|
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel);
|
|
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel);
|
|
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel);
|
|
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel);
|
|
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel);
|
|
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel);
|
|
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel);
|
|
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel);
|
|
|
|
/*
|
|
* On some chipsets we can disable the generation of legacy INTx boot
|
|
* interrupts.
|
|
*/
|
|
|
|
/*
|
|
* IO-APIC1 on 6300ESB generates boot interrupts, see intel order no
|
|
* 300641-004US, section 5.7.3.
|
|
*/
|
|
#define INTEL_6300_IOAPIC_ABAR 0x40
|
|
#define INTEL_6300_DISABLE_BOOT_IRQ (1<<14)
|
|
|
|
static void quirk_disable_intel_boot_interrupt(struct pci_dev *dev)
|
|
{
|
|
u16 pci_config_word;
|
|
|
|
if (noioapicquirk)
|
|
return;
|
|
|
|
pci_read_config_word(dev, INTEL_6300_IOAPIC_ABAR, &pci_config_word);
|
|
pci_config_word |= INTEL_6300_DISABLE_BOOT_IRQ;
|
|
pci_write_config_word(dev, INTEL_6300_IOAPIC_ABAR, pci_config_word);
|
|
|
|
dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n",
|
|
dev->vendor, dev->device);
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt);
|
|
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt);
|
|
|
|
/*
|
|
* disable boot interrupts on HT-1000
|
|
*/
|
|
#define BC_HT1000_FEATURE_REG 0x64
|
|
#define BC_HT1000_PIC_REGS_ENABLE (1<<0)
|
|
#define BC_HT1000_MAP_IDX 0xC00
|
|
#define BC_HT1000_MAP_DATA 0xC01
|
|
|
|
static void quirk_disable_broadcom_boot_interrupt(struct pci_dev *dev)
|
|
{
|
|
u32 pci_config_dword;
|
|
u8 irq;
|
|
|
|
if (noioapicquirk)
|
|
return;
|
|
|
|
pci_read_config_dword(dev, BC_HT1000_FEATURE_REG, &pci_config_dword);
|
|
pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword |
|
|
BC_HT1000_PIC_REGS_ENABLE);
|
|
|
|
for (irq = 0x10; irq < 0x10 + 32; irq++) {
|
|
outb(irq, BC_HT1000_MAP_IDX);
|
|
outb(0x00, BC_HT1000_MAP_DATA);
|
|
}
|
|
|
|
pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword);
|
|
|
|
dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n",
|
|
dev->vendor, dev->device);
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt);
|
|
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt);
|
|
|
|
/*
|
|
* disable boot interrupts on AMD and ATI chipsets
|
|
*/
|
|
/*
|
|
* NOIOAMODE needs to be disabled to disable "boot interrupts". For AMD 8131
|
|
* rev. A0 and B0, NOIOAMODE needs to be disabled anyway to fix IO-APIC mode
|
|
* (due to an erratum).
|
|
*/
|
|
#define AMD_813X_MISC 0x40
|
|
#define AMD_813X_NOIOAMODE (1<<0)
|
|
#define AMD_813X_REV_B1 0x12
|
|
#define AMD_813X_REV_B2 0x13
|
|
|
|
static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev)
|
|
{
|
|
u32 pci_config_dword;
|
|
|
|
if (noioapicquirk)
|
|
return;
|
|
if ((dev->revision == AMD_813X_REV_B1) ||
|
|
(dev->revision == AMD_813X_REV_B2))
|
|
return;
|
|
|
|
pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword);
|
|
pci_config_dword &= ~AMD_813X_NOIOAMODE;
|
|
pci_write_config_dword(dev, AMD_813X_MISC, pci_config_dword);
|
|
|
|
dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n",
|
|
dev->vendor, dev->device);
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt);
|
|
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt);
|
|
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt);
|
|
|
|
#define AMD_8111_PCI_IRQ_ROUTING 0x56
|
|
|
|
static void quirk_disable_amd_8111_boot_interrupt(struct pci_dev *dev)
|
|
{
|
|
u16 pci_config_word;
|
|
|
|
if (noioapicquirk)
|
|
return;
|
|
|
|
pci_read_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, &pci_config_word);
|
|
if (!pci_config_word) {
|
|
dev_info(&dev->dev, "boot interrupts on device [%04x:%04x] "
|
|
"already disabled\n", dev->vendor, dev->device);
|
|
return;
|
|
}
|
|
pci_write_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, 0);
|
|
dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n",
|
|
dev->vendor, dev->device);
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt);
|
|
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt);
|
|
#endif /* CONFIG_X86_IO_APIC */
|
|
|
|
/*
|
|
* Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size
|
|
* but the PIO transfers won't work if BAR0 falls at the odd 8 bytes.
|
|
* Re-allocate the region if needed...
|
|
*/
|
|
static void __init quirk_tc86c001_ide(struct pci_dev *dev)
|
|
{
|
|
struct resource *r = &dev->resource[0];
|
|
|
|
if (r->start & 0x8) {
|
|
r->start = 0;
|
|
r->end = 0xf;
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2,
|
|
PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE,
|
|
quirk_tc86c001_ide);
|
|
|
|
static void __devinit quirk_netmos(struct pci_dev *dev)
|
|
{
|
|
unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4;
|
|
unsigned int num_serial = dev->subsystem_device & 0xf;
|
|
|
|
/*
|
|
* These Netmos parts are multiport serial devices with optional
|
|
* parallel ports. Even when parallel ports are present, they
|
|
* are identified as class SERIAL, which means the serial driver
|
|
* will claim them. To prevent this, mark them as class OTHER.
|
|
* These combo devices should be claimed by parport_serial.
|
|
*
|
|
* The subdevice ID is of the form 0x00PS, where <P> is the number
|
|
* of parallel ports and <S> is the number of serial ports.
|
|
*/
|
|
switch (dev->device) {
|
|
case PCI_DEVICE_ID_NETMOS_9835:
|
|
/* Well, this rule doesn't hold for the following 9835 device */
|
|
if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
|
|
dev->subsystem_device == 0x0299)
|
|
return;
|
|
case PCI_DEVICE_ID_NETMOS_9735:
|
|
case PCI_DEVICE_ID_NETMOS_9745:
|
|
case PCI_DEVICE_ID_NETMOS_9845:
|
|
case PCI_DEVICE_ID_NETMOS_9855:
|
|
if (num_parallel) {
|
|
dev_info(&dev->dev, "Netmos %04x (%u parallel, "
|
|
"%u serial); changing class SERIAL to OTHER "
|
|
"(use parport_serial)\n",
|
|
dev->device, num_parallel, num_serial);
|
|
dev->class = (PCI_CLASS_COMMUNICATION_OTHER << 8) |
|
|
(dev->class & 0xff);
|
|
}
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID,
|
|
PCI_CLASS_COMMUNICATION_SERIAL, 8, quirk_netmos);
|
|
|
|
static void __devinit quirk_e100_interrupt(struct pci_dev *dev)
|
|
{
|
|
u16 command, pmcsr;
|
|
u8 __iomem *csr;
|
|
u8 cmd_hi;
|
|
int pm;
|
|
|
|
switch (dev->device) {
|
|
/* PCI IDs taken from drivers/net/e100.c */
|
|
case 0x1029:
|
|
case 0x1030 ... 0x1034:
|
|
case 0x1038 ... 0x103E:
|
|
case 0x1050 ... 0x1057:
|
|
case 0x1059:
|
|
case 0x1064 ... 0x106B:
|
|
case 0x1091 ... 0x1095:
|
|
case 0x1209:
|
|
case 0x1229:
|
|
case 0x2449:
|
|
case 0x2459:
|
|
case 0x245D:
|
|
case 0x27DC:
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Some firmware hands off the e100 with interrupts enabled,
|
|
* which can cause a flood of interrupts if packets are
|
|
* received before the driver attaches to the device. So
|
|
* disable all e100 interrupts here. The driver will
|
|
* re-enable them when it's ready.
|
|
*/
|
|
pci_read_config_word(dev, PCI_COMMAND, &command);
|
|
|
|
if (!(command & PCI_COMMAND_MEMORY) || !pci_resource_start(dev, 0))
|
|
return;
|
|
|
|
/*
|
|
* Check that the device is in the D0 power state. If it's not,
|
|
* there is no point to look any further.
|
|
*/
|
|
pm = pci_find_capability(dev, PCI_CAP_ID_PM);
|
|
if (pm) {
|
|
pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr);
|
|
if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0)
|
|
return;
|
|
}
|
|
|
|
/* Convert from PCI bus to resource space. */
|
|
csr = ioremap(pci_resource_start(dev, 0), 8);
|
|
if (!csr) {
|
|
dev_warn(&dev->dev, "Can't map e100 registers\n");
|
|
return;
|
|
}
|
|
|
|
cmd_hi = readb(csr + 3);
|
|
if (cmd_hi == 0) {
|
|
dev_warn(&dev->dev, "Firmware left e100 interrupts enabled; "
|
|
"disabling\n");
|
|
writeb(1, csr + 3);
|
|
}
|
|
|
|
iounmap(csr);
|
|
}
|
|
DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
|
|
PCI_CLASS_NETWORK_ETHERNET, 8, quirk_e100_interrupt);
|
|
|
|
/*
|
|
* The 82575 and 82598 may experience data corruption issues when transitioning
|
|
* out of L0S. To prevent this we need to disable L0S on the pci-e link
|
|
*/
|
|
static void __devinit quirk_disable_aspm_l0s(struct pci_dev *dev)
|
|
{
|
|
dev_info(&dev->dev, "Disabling L0s\n");
|
|
pci_disable_link_state(dev, PCIE_LINK_STATE_L0S);
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a7, quirk_disable_aspm_l0s);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a9, quirk_disable_aspm_l0s);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10b6, quirk_disable_aspm_l0s);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c6, quirk_disable_aspm_l0s);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c7, quirk_disable_aspm_l0s);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c8, quirk_disable_aspm_l0s);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10d6, quirk_disable_aspm_l0s);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10db, quirk_disable_aspm_l0s);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10dd, quirk_disable_aspm_l0s);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10e1, quirk_disable_aspm_l0s);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10ec, quirk_disable_aspm_l0s);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s);
|
|
|
|
static void __devinit fixup_rev1_53c810(struct pci_dev* dev)
|
|
{
|
|
/* rev 1 ncr53c810 chips don't set the class at all which means
|
|
* they don't get their resources remapped. Fix that here.
|
|
*/
|
|
|
|
if (dev->class == PCI_CLASS_NOT_DEFINED) {
|
|
dev_info(&dev->dev, "NCR 53c810 rev 1 detected; setting PCI class\n");
|
|
dev->class = PCI_CLASS_STORAGE_SCSI;
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
|
|
|
|
/* Enable 1k I/O space granularity on the Intel P64H2 */
|
|
static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
|
|
{
|
|
u16 en1k;
|
|
u8 io_base_lo, io_limit_lo;
|
|
unsigned long base, limit;
|
|
struct resource *res = dev->resource + PCI_BRIDGE_RESOURCES;
|
|
|
|
pci_read_config_word(dev, 0x40, &en1k);
|
|
|
|
if (en1k & 0x200) {
|
|
dev_info(&dev->dev, "Enable I/O Space to 1KB granularity\n");
|
|
|
|
pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
|
|
pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo);
|
|
base = (io_base_lo & (PCI_IO_RANGE_MASK | 0x0c)) << 8;
|
|
limit = (io_limit_lo & (PCI_IO_RANGE_MASK | 0x0c)) << 8;
|
|
|
|
if (base <= limit) {
|
|
res->start = base;
|
|
res->end = limit + 0x3ff;
|
|
}
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io);
|
|
|
|
/* Fix the IOBL_ADR for 1k I/O space granularity on the Intel P64H2
|
|
* The IOBL_ADR gets re-written to 4k boundaries in pci_setup_bridge()
|
|
* in drivers/pci/setup-bus.c
|
|
*/
|
|
static void __devinit quirk_p64h2_1k_io_fix_iobl(struct pci_dev *dev)
|
|
{
|
|
u16 en1k, iobl_adr, iobl_adr_1k;
|
|
struct resource *res = dev->resource + PCI_BRIDGE_RESOURCES;
|
|
|
|
pci_read_config_word(dev, 0x40, &en1k);
|
|
|
|
if (en1k & 0x200) {
|
|
pci_read_config_word(dev, PCI_IO_BASE, &iobl_adr);
|
|
|
|
iobl_adr_1k = iobl_adr | (res->start >> 8) | (res->end & 0xfc00);
|
|
|
|
if (iobl_adr != iobl_adr_1k) {
|
|
dev_info(&dev->dev, "Fixing P64H2 IOBL_ADR from 0x%x to 0x%x for 1KB granularity\n",
|
|
iobl_adr,iobl_adr_1k);
|
|
pci_write_config_word(dev, PCI_IO_BASE, iobl_adr_1k);
|
|
}
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io_fix_iobl);
|
|
|
|
/* Under some circumstances, AER is not linked with extended capabilities.
|
|
* Force it to be linked by setting the corresponding control bit in the
|
|
* config space.
|
|
*/
|
|
static void quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev)
|
|
{
|
|
uint8_t b;
|
|
if (pci_read_config_byte(dev, 0xf41, &b) == 0) {
|
|
if (!(b & 0x20)) {
|
|
pci_write_config_byte(dev, 0xf41, b | 0x20);
|
|
dev_info(&dev->dev,
|
|
"Linking AER extended capability\n");
|
|
}
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
|
|
quirk_nvidia_ck804_pcie_aer_ext_cap);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
|
|
quirk_nvidia_ck804_pcie_aer_ext_cap);
|
|
|
|
static void __devinit quirk_via_cx700_pci_parking_caching(struct pci_dev *dev)
|
|
{
|
|
/*
|
|
* Disable PCI Bus Parking and PCI Master read caching on CX700
|
|
* which causes unspecified timing errors with a VT6212L on the PCI
|
|
* bus leading to USB2.0 packet loss.
|
|
*
|
|
* This quirk is only enabled if a second (on the external PCI bus)
|
|
* VT6212L is found -- the CX700 core itself also contains a USB
|
|
* host controller with the same PCI ID as the VT6212L.
|
|
*/
|
|
|
|
/* Count VT6212L instances */
|
|
struct pci_dev *p = pci_get_device(PCI_VENDOR_ID_VIA,
|
|
PCI_DEVICE_ID_VIA_8235_USB_2, NULL);
|
|
uint8_t b;
|
|
|
|
/* p should contain the first (internal) VT6212L -- see if we have
|
|
an external one by searching again */
|
|
p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235_USB_2, p);
|
|
if (!p)
|
|
return;
|
|
pci_dev_put(p);
|
|
|
|
if (pci_read_config_byte(dev, 0x76, &b) == 0) {
|
|
if (b & 0x40) {
|
|
/* Turn off PCI Bus Parking */
|
|
pci_write_config_byte(dev, 0x76, b ^ 0x40);
|
|
|
|
dev_info(&dev->dev,
|
|
"Disabling VIA CX700 PCI parking\n");
|
|
}
|
|
}
|
|
|
|
if (pci_read_config_byte(dev, 0x72, &b) == 0) {
|
|
if (b != 0) {
|
|
/* Turn off PCI Master read caching */
|
|
pci_write_config_byte(dev, 0x72, 0x0);
|
|
|
|
/* Set PCI Master Bus time-out to "1x16 PCLK" */
|
|
pci_write_config_byte(dev, 0x75, 0x1);
|
|
|
|
/* Disable "Read FIFO Timer" */
|
|
pci_write_config_byte(dev, 0x77, 0x0);
|
|
|
|
dev_info(&dev->dev,
|
|
"Disabling VIA CX700 PCI caching\n");
|
|
}
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching);
|
|
|
|
/*
|
|
* For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the
|
|
* VPD end tag will hang the device. This problem was initially
|
|
* observed when a vpd entry was created in sysfs
|
|
* ('/sys/bus/pci/devices/<id>/vpd'). A read to this sysfs entry
|
|
* will dump 32k of data. Reading a full 32k will cause an access
|
|
* beyond the VPD end tag causing the device to hang. Once the device
|
|
* is hung, the bnx2 driver will not be able to reset the device.
|
|
* We believe that it is legal to read beyond the end tag and
|
|
* therefore the solution is to limit the read/write length.
|
|
*/
|
|
static void __devinit quirk_brcm_570x_limit_vpd(struct pci_dev *dev)
|
|
{
|
|
/*
|
|
* Only disable the VPD capability for 5706, 5706S, 5708,
|
|
* 5708S and 5709 rev. A
|
|
*/
|
|
if ((dev->device == PCI_DEVICE_ID_NX2_5706) ||
|
|
(dev->device == PCI_DEVICE_ID_NX2_5706S) ||
|
|
(dev->device == PCI_DEVICE_ID_NX2_5708) ||
|
|
(dev->device == PCI_DEVICE_ID_NX2_5708S) ||
|
|
((dev->device == PCI_DEVICE_ID_NX2_5709) &&
|
|
(dev->revision & 0xf0) == 0x0)) {
|
|
if (dev->vpd)
|
|
dev->vpd->len = 0x80;
|
|
}
|
|
}
|
|
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
|
|
PCI_DEVICE_ID_NX2_5706,
|
|
quirk_brcm_570x_limit_vpd);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
|
|
PCI_DEVICE_ID_NX2_5706S,
|
|
quirk_brcm_570x_limit_vpd);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
|
|
PCI_DEVICE_ID_NX2_5708,
|
|
quirk_brcm_570x_limit_vpd);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
|
|
PCI_DEVICE_ID_NX2_5708S,
|
|
quirk_brcm_570x_limit_vpd);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
|
|
PCI_DEVICE_ID_NX2_5709,
|
|
quirk_brcm_570x_limit_vpd);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
|
|
PCI_DEVICE_ID_NX2_5709S,
|
|
quirk_brcm_570x_limit_vpd);
|
|
|
|
/* Originally in EDAC sources for i82875P:
|
|
* Intel tells BIOS developers to hide device 6 which
|
|
* configures the overflow device access containing
|
|
* the DRBs - this is where we expose device 6.
|
|
* http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm
|
|
*/
|
|
static void __devinit quirk_unhide_mch_dev6(struct pci_dev *dev)
|
|
{
|
|
u8 reg;
|
|
|
|
if (pci_read_config_byte(dev, 0xF4, ®) == 0 && !(reg & 0x02)) {
|
|
dev_info(&dev->dev, "Enabling MCH 'Overflow' Device\n");
|
|
pci_write_config_byte(dev, 0xF4, reg | 0x02);
|
|
}
|
|
}
|
|
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB,
|
|
quirk_unhide_mch_dev6);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB,
|
|
quirk_unhide_mch_dev6);
|
|
|
|
#ifdef CONFIG_TILE
|
|
/*
|
|
* The Tilera TILEmpower platform needs to set the link speed
|
|
* to 2.5GT(Giga-Transfers)/s (Gen 1). The default link speed
|
|
* setting is 5GT/s (Gen 2). 0x98 is the Link Control2 PCIe
|
|
* capability register of the PEX8624 PCIe switch. The switch
|
|
* supports link speed auto negotiation, but falsely sets
|
|
* the link speed to 5GT/s.
|
|
*/
|
|
static void __devinit quirk_tile_plx_gen1(struct pci_dev *dev)
|
|
{
|
|
if (tile_plx_gen1) {
|
|
pci_write_config_dword(dev, 0x98, 0x1);
|
|
mdelay(50);
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8624, quirk_tile_plx_gen1);
|
|
#endif /* CONFIG_TILE */
|
|
|
|
#ifdef CONFIG_PCI_MSI
|
|
/* Some chipsets do not support MSI. We cannot easily rely on setting
|
|
* PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually
|
|
* some other busses controlled by the chipset even if Linux is not
|
|
* aware of it. Instead of setting the flag on all busses in the
|
|
* machine, simply disable MSI globally.
|
|
*/
|
|
static void __init quirk_disable_all_msi(struct pci_dev *dev)
|
|
{
|
|
pci_no_msi();
|
|
dev_warn(&dev->dev, "MSI quirk detected; MSI disabled\n");
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_disable_all_msi);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_all_msi);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3364, quirk_disable_all_msi);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8380_0, quirk_disable_all_msi);
|
|
|
|
/* Disable MSI on chipsets that are known to not support it */
|
|
static void __devinit quirk_disable_msi(struct pci_dev *dev)
|
|
{
|
|
if (dev->subordinate) {
|
|
dev_warn(&dev->dev, "MSI quirk detected; "
|
|
"subordinate MSI disabled\n");
|
|
dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0xa238, quirk_disable_msi);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x5a3f, quirk_disable_msi);
|
|
|
|
/*
|
|
* The APC bridge device in AMD 780 family northbridges has some random
|
|
* OEM subsystem ID in its vendor ID register (erratum 18), so instead
|
|
* we use the possible vendor/device IDs of the host bridge for the
|
|
* declared quirk, and search for the APC bridge by slot number.
|
|
*/
|
|
static void __devinit quirk_amd_780_apc_msi(struct pci_dev *host_bridge)
|
|
{
|
|
struct pci_dev *apc_bridge;
|
|
|
|
apc_bridge = pci_get_slot(host_bridge->bus, PCI_DEVFN(1, 0));
|
|
if (apc_bridge) {
|
|
if (apc_bridge->device == 0x9602)
|
|
quirk_disable_msi(apc_bridge);
|
|
pci_dev_put(apc_bridge);
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9600, quirk_amd_780_apc_msi);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9601, quirk_amd_780_apc_msi);
|
|
|
|
/* Go through the list of Hypertransport capabilities and
|
|
* return 1 if a HT MSI capability is found and enabled */
|
|
static int __devinit msi_ht_cap_enabled(struct pci_dev *dev)
|
|
{
|
|
int pos, ttl = 48;
|
|
|
|
pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
|
|
while (pos && ttl--) {
|
|
u8 flags;
|
|
|
|
if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
|
|
&flags) == 0)
|
|
{
|
|
dev_info(&dev->dev, "Found %s HT MSI Mapping\n",
|
|
flags & HT_MSI_FLAGS_ENABLE ?
|
|
"enabled" : "disabled");
|
|
return (flags & HT_MSI_FLAGS_ENABLE) != 0;
|
|
}
|
|
|
|
pos = pci_find_next_ht_capability(dev, pos,
|
|
HT_CAPTYPE_MSI_MAPPING);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Check the hypertransport MSI mapping to know whether MSI is enabled or not */
|
|
static void __devinit quirk_msi_ht_cap(struct pci_dev *dev)
|
|
{
|
|
if (dev->subordinate && !msi_ht_cap_enabled(dev)) {
|
|
dev_warn(&dev->dev, "MSI quirk detected; "
|
|
"subordinate MSI disabled\n");
|
|
dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE,
|
|
quirk_msi_ht_cap);
|
|
|
|
/* The nVidia CK804 chipset may have 2 HT MSI mappings.
|
|
* MSI are supported if the MSI capability set in any of these mappings.
|
|
*/
|
|
static void __devinit quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev)
|
|
{
|
|
struct pci_dev *pdev;
|
|
|
|
if (!dev->subordinate)
|
|
return;
|
|
|
|
/* check HT MSI cap on this chipset and the root one.
|
|
* a single one having MSI is enough to be sure that MSI are supported.
|
|
*/
|
|
pdev = pci_get_slot(dev->bus, 0);
|
|
if (!pdev)
|
|
return;
|
|
if (!msi_ht_cap_enabled(dev) && !msi_ht_cap_enabled(pdev)) {
|
|
dev_warn(&dev->dev, "MSI quirk detected; "
|
|
"subordinate MSI disabled\n");
|
|
dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
|
|
}
|
|
pci_dev_put(pdev);
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
|
|
quirk_nvidia_ck804_msi_ht_cap);
|
|
|
|
/* Force enable MSI mapping capability on HT bridges */
|
|
static void __devinit ht_enable_msi_mapping(struct pci_dev *dev)
|
|
{
|
|
int pos, ttl = 48;
|
|
|
|
pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
|
|
while (pos && ttl--) {
|
|
u8 flags;
|
|
|
|
if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
|
|
&flags) == 0) {
|
|
dev_info(&dev->dev, "Enabling HT MSI Mapping\n");
|
|
|
|
pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
|
|
flags | HT_MSI_FLAGS_ENABLE);
|
|
}
|
|
pos = pci_find_next_ht_capability(dev, pos,
|
|
HT_CAPTYPE_MSI_MAPPING);
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS,
|
|
PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB,
|
|
ht_enable_msi_mapping);
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE,
|
|
ht_enable_msi_mapping);
|
|
|
|
/* The P5N32-SLI motherboards from Asus have a problem with msi
|
|
* for the MCP55 NIC. It is not yet determined whether the msi problem
|
|
* also affects other devices. As for now, turn off msi for this device.
|
|
*/
|
|
static void __devinit nvenet_msi_disable(struct pci_dev *dev)
|
|
{
|
|
const char *board_name = dmi_get_system_info(DMI_BOARD_NAME);
|
|
|
|
if (board_name &&
|
|
(strstr(board_name, "P5N32-SLI PREMIUM") ||
|
|
strstr(board_name, "P5N32-E SLI"))) {
|
|
dev_info(&dev->dev,
|
|
"Disabling msi for MCP55 NIC on P5N32-SLI\n");
|
|
dev->no_msi = 1;
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA,
|
|
PCI_DEVICE_ID_NVIDIA_NVENET_15,
|
|
nvenet_msi_disable);
|
|
|
|
/*
|
|
* Some versions of the MCP55 bridge from nvidia have a legacy irq routing
|
|
* config register. This register controls the routing of legacy interrupts
|
|
* from devices that route through the MCP55. If this register is misprogramed
|
|
* interrupts are only sent to the bsp, unlike conventional systems where the
|
|
* irq is broadxast to all online cpus. Not having this register set
|
|
* properly prevents kdump from booting up properly, so lets make sure that
|
|
* we have it set correctly.
|
|
* Note this is an undocumented register.
|
|
*/
|
|
static void __devinit nvbridge_check_legacy_irq_routing(struct pci_dev *dev)
|
|
{
|
|
u32 cfg;
|
|
|
|
if (!pci_find_capability(dev, PCI_CAP_ID_HT))
|
|
return;
|
|
|
|
pci_read_config_dword(dev, 0x74, &cfg);
|
|
|
|
if (cfg & ((1 << 2) | (1 << 15))) {
|
|
printk(KERN_INFO "Rewriting irq routing register on MCP55\n");
|
|
cfg &= ~((1 << 2) | (1 << 15));
|
|
pci_write_config_dword(dev, 0x74, cfg);
|
|
}
|
|
}
|
|
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA,
|
|
PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V0,
|
|
nvbridge_check_legacy_irq_routing);
|
|
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA,
|
|
PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V4,
|
|
nvbridge_check_legacy_irq_routing);
|
|
|
|
static int __devinit ht_check_msi_mapping(struct pci_dev *dev)
|
|
{
|
|
int pos, ttl = 48;
|
|
int found = 0;
|
|
|
|
/* check if there is HT MSI cap or enabled on this device */
|
|
pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
|
|
while (pos && ttl--) {
|
|
u8 flags;
|
|
|
|
if (found < 1)
|
|
found = 1;
|
|
if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
|
|
&flags) == 0) {
|
|
if (flags & HT_MSI_FLAGS_ENABLE) {
|
|
if (found < 2) {
|
|
found = 2;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
pos = pci_find_next_ht_capability(dev, pos,
|
|
HT_CAPTYPE_MSI_MAPPING);
|
|
}
|
|
|
|
return found;
|
|
}
|
|
|
|
static int __devinit host_bridge_with_leaf(struct pci_dev *host_bridge)
|
|
{
|
|
struct pci_dev *dev;
|
|
int pos;
|
|
int i, dev_no;
|
|
int found = 0;
|
|
|
|
dev_no = host_bridge->devfn >> 3;
|
|
for (i = dev_no + 1; i < 0x20; i++) {
|
|
dev = pci_get_slot(host_bridge->bus, PCI_DEVFN(i, 0));
|
|
if (!dev)
|
|
continue;
|
|
|
|
/* found next host bridge ?*/
|
|
pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE);
|
|
if (pos != 0) {
|
|
pci_dev_put(dev);
|
|
break;
|
|
}
|
|
|
|
if (ht_check_msi_mapping(dev)) {
|
|
found = 1;
|
|
pci_dev_put(dev);
|
|
break;
|
|
}
|
|
pci_dev_put(dev);
|
|
}
|
|
|
|
return found;
|
|
}
|
|
|
|
#define PCI_HT_CAP_SLAVE_CTRL0 4 /* link control */
|
|
#define PCI_HT_CAP_SLAVE_CTRL1 8 /* link control to */
|
|
|
|
static int __devinit is_end_of_ht_chain(struct pci_dev *dev)
|
|
{
|
|
int pos, ctrl_off;
|
|
int end = 0;
|
|
u16 flags, ctrl;
|
|
|
|
pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE);
|
|
|
|
if (!pos)
|
|
goto out;
|
|
|
|
pci_read_config_word(dev, pos + PCI_CAP_FLAGS, &flags);
|
|
|
|
ctrl_off = ((flags >> 10) & 1) ?
|
|
PCI_HT_CAP_SLAVE_CTRL0 : PCI_HT_CAP_SLAVE_CTRL1;
|
|
pci_read_config_word(dev, pos + ctrl_off, &ctrl);
|
|
|
|
if (ctrl & (1 << 6))
|
|
end = 1;
|
|
|
|
out:
|
|
return end;
|
|
}
|
|
|
|
static void __devinit nv_ht_enable_msi_mapping(struct pci_dev *dev)
|
|
{
|
|
struct pci_dev *host_bridge;
|
|
int pos;
|
|
int i, dev_no;
|
|
int found = 0;
|
|
|
|
dev_no = dev->devfn >> 3;
|
|
for (i = dev_no; i >= 0; i--) {
|
|
host_bridge = pci_get_slot(dev->bus, PCI_DEVFN(i, 0));
|
|
if (!host_bridge)
|
|
continue;
|
|
|
|
pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE);
|
|
if (pos != 0) {
|
|
found = 1;
|
|
break;
|
|
}
|
|
pci_dev_put(host_bridge);
|
|
}
|
|
|
|
if (!found)
|
|
return;
|
|
|
|
/* don't enable end_device/host_bridge with leaf directly here */
|
|
if (host_bridge == dev && is_end_of_ht_chain(host_bridge) &&
|
|
host_bridge_with_leaf(host_bridge))
|
|
goto out;
|
|
|
|
/* root did that ! */
|
|
if (msi_ht_cap_enabled(host_bridge))
|
|
goto out;
|
|
|
|
ht_enable_msi_mapping(dev);
|
|
|
|
out:
|
|
pci_dev_put(host_bridge);
|
|
}
|
|
|
|
static void __devinit ht_disable_msi_mapping(struct pci_dev *dev)
|
|
{
|
|
int pos, ttl = 48;
|
|
|
|
pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
|
|
while (pos && ttl--) {
|
|
u8 flags;
|
|
|
|
if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
|
|
&flags) == 0) {
|
|
dev_info(&dev->dev, "Disabling HT MSI Mapping\n");
|
|
|
|
pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
|
|
flags & ~HT_MSI_FLAGS_ENABLE);
|
|
}
|
|
pos = pci_find_next_ht_capability(dev, pos,
|
|
HT_CAPTYPE_MSI_MAPPING);
|
|
}
|
|
}
|
|
|
|
static void __devinit __nv_msi_ht_cap_quirk(struct pci_dev *dev, int all)
|
|
{
|
|
struct pci_dev *host_bridge;
|
|
int pos;
|
|
int found;
|
|
|
|
if (!pci_msi_enabled())
|
|
return;
|
|
|
|
/* check if there is HT MSI cap or enabled on this device */
|
|
found = ht_check_msi_mapping(dev);
|
|
|
|
/* no HT MSI CAP */
|
|
if (found == 0)
|
|
return;
|
|
|
|
/*
|
|
* HT MSI mapping should be disabled on devices that are below
|
|
* a non-Hypertransport host bridge. Locate the host bridge...
|
|
*/
|
|
host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
|
|
if (host_bridge == NULL) {
|
|
dev_warn(&dev->dev,
|
|
"nv_msi_ht_cap_quirk didn't locate host bridge\n");
|
|
return;
|
|
}
|
|
|
|
pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE);
|
|
if (pos != 0) {
|
|
/* Host bridge is to HT */
|
|
if (found == 1) {
|
|
/* it is not enabled, try to enable it */
|
|
if (all)
|
|
ht_enable_msi_mapping(dev);
|
|
else
|
|
nv_ht_enable_msi_mapping(dev);
|
|
}
|
|
return;
|
|
}
|
|
|
|
/* HT MSI is not enabled */
|
|
if (found == 1)
|
|
return;
|
|
|
|
/* Host bridge is not to HT, disable HT MSI mapping on this device */
|
|
ht_disable_msi_mapping(dev);
|
|
}
|
|
|
|
static void __devinit nv_msi_ht_cap_quirk_all(struct pci_dev *dev)
|
|
{
|
|
return __nv_msi_ht_cap_quirk(dev, 1);
|
|
}
|
|
|
|
static void __devinit nv_msi_ht_cap_quirk_leaf(struct pci_dev *dev)
|
|
{
|
|
return __nv_msi_ht_cap_quirk(dev, 0);
|
|
}
|
|
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf);
|
|
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all);
|
|
|
|
static void __devinit quirk_msi_intx_disable_bug(struct pci_dev *dev)
|
|
{
|
|
dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG;
|
|
}
|
|
static void __devinit quirk_msi_intx_disable_ati_bug(struct pci_dev *dev)
|
|
{
|
|
struct pci_dev *p;
|
|
|
|
/* SB700 MSI issue will be fixed at HW level from revision A21,
|
|
* we need check PCI REVISION ID of SMBus controller to get SB700
|
|
* revision.
|
|
*/
|
|
p = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
|
|
NULL);
|
|
if (!p)
|
|
return;
|
|
|
|
if ((p->revision < 0x3B) && (p->revision >= 0x30))
|
|
dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG;
|
|
pci_dev_put(p);
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
|
|
PCI_DEVICE_ID_TIGON3_5780,
|
|
quirk_msi_intx_disable_bug);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
|
|
PCI_DEVICE_ID_TIGON3_5780S,
|
|
quirk_msi_intx_disable_bug);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
|
|
PCI_DEVICE_ID_TIGON3_5714,
|
|
quirk_msi_intx_disable_bug);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
|
|
PCI_DEVICE_ID_TIGON3_5714S,
|
|
quirk_msi_intx_disable_bug);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
|
|
PCI_DEVICE_ID_TIGON3_5715,
|
|
quirk_msi_intx_disable_bug);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
|
|
PCI_DEVICE_ID_TIGON3_5715S,
|
|
quirk_msi_intx_disable_bug);
|
|
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4390,
|
|
quirk_msi_intx_disable_ati_bug);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4391,
|
|
quirk_msi_intx_disable_ati_bug);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4392,
|
|
quirk_msi_intx_disable_ati_bug);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4393,
|
|
quirk_msi_intx_disable_ati_bug);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4394,
|
|
quirk_msi_intx_disable_ati_bug);
|
|
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4373,
|
|
quirk_msi_intx_disable_bug);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4374,
|
|
quirk_msi_intx_disable_bug);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4375,
|
|
quirk_msi_intx_disable_bug);
|
|
|
|
#endif /* CONFIG_PCI_MSI */
|
|
|
|
/* Allow manual resource allocation for PCI hotplug bridges
|
|
* via pci=hpmemsize=nnM and pci=hpiosize=nnM parameters. For
|
|
* some PCI-PCI hotplug bridges, like PLX 6254 (former HINT HB6),
|
|
* kernel fails to allocate resources when hotplug device is
|
|
* inserted and PCI bus is rescanned.
|
|
*/
|
|
static void __devinit quirk_hotplug_bridge(struct pci_dev *dev)
|
|
{
|
|
dev->is_hotplug_bridge = 1;
|
|
}
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HINT, 0x0020, quirk_hotplug_bridge);
|
|
|
|
/*
|
|
* This is a quirk for the Ricoh MMC controller found as a part of
|
|
* some mulifunction chips.
|
|
|
|
* This is very similar and based on the ricoh_mmc driver written by
|
|
* Philip Langdale. Thank you for these magic sequences.
|
|
*
|
|
* These chips implement the four main memory card controllers (SD, MMC, MS, xD)
|
|
* and one or both of cardbus or firewire.
|
|
*
|
|
* It happens that they implement SD and MMC
|
|
* support as separate controllers (and PCI functions). The linux SDHCI
|
|
* driver supports MMC cards but the chip detects MMC cards in hardware
|
|
* and directs them to the MMC controller - so the SDHCI driver never sees
|
|
* them.
|
|
*
|
|
* To get around this, we must disable the useless MMC controller.
|
|
* At that point, the SDHCI controller will start seeing them
|
|
* It seems to be the case that the relevant PCI registers to deactivate the
|
|
* MMC controller live on PCI function 0, which might be the cardbus controller
|
|
* or the firewire controller, depending on the particular chip in question
|
|
*
|
|
* This has to be done early, because as soon as we disable the MMC controller
|
|
* other pci functions shift up one level, e.g. function #2 becomes function
|
|
* #1, and this will confuse the pci core.
|
|
*/
|
|
|
|
#ifdef CONFIG_MMC_RICOH_MMC
|
|
static void ricoh_mmc_fixup_rl5c476(struct pci_dev *dev)
|
|
{
|
|
/* disable via cardbus interface */
|
|
u8 write_enable;
|
|
u8 write_target;
|
|
u8 disable;
|
|
|
|
/* disable must be done via function #0 */
|
|
if (PCI_FUNC(dev->devfn))
|
|
return;
|
|
|
|
pci_read_config_byte(dev, 0xB7, &disable);
|
|
if (disable & 0x02)
|
|
return;
|
|
|
|
pci_read_config_byte(dev, 0x8E, &write_enable);
|
|
pci_write_config_byte(dev, 0x8E, 0xAA);
|
|
pci_read_config_byte(dev, 0x8D, &write_target);
|
|
pci_write_config_byte(dev, 0x8D, 0xB7);
|
|
pci_write_config_byte(dev, 0xB7, disable | 0x02);
|
|
pci_write_config_byte(dev, 0x8E, write_enable);
|
|
pci_write_config_byte(dev, 0x8D, write_target);
|
|
|
|
dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via cardbus function)\n");
|
|
dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
|
|
}
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476);
|
|
|
|
static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev)
|
|
{
|
|
/* disable via firewire interface */
|
|
u8 write_enable;
|
|
u8 disable;
|
|
|
|
/* disable must be done via function #0 */
|
|
if (PCI_FUNC(dev->devfn))
|
|
return;
|
|
/*
|
|
* RICOH 0xe823 SD/MMC card reader fails to recognize
|
|
* certain types of SD/MMC cards. Lowering the SD base
|
|
* clock frequency from 200Mhz to 50Mhz fixes this issue.
|
|
*
|
|
* 0x150 - SD2.0 mode enable for changing base clock
|
|
* frequency to 50Mhz
|
|
* 0xe1 - Base clock frequency
|
|
* 0x32 - 50Mhz new clock frequency
|
|
* 0xf9 - Key register for 0x150
|
|
* 0xfc - key register for 0xe1
|
|
*/
|
|
if (dev->device == PCI_DEVICE_ID_RICOH_R5CE823) {
|
|
pci_write_config_byte(dev, 0xf9, 0xfc);
|
|
pci_write_config_byte(dev, 0x150, 0x10);
|
|
pci_write_config_byte(dev, 0xf9, 0x00);
|
|
pci_write_config_byte(dev, 0xfc, 0x01);
|
|
pci_write_config_byte(dev, 0xe1, 0x32);
|
|
pci_write_config_byte(dev, 0xfc, 0x00);
|
|
|
|
dev_notice(&dev->dev, "MMC controller base frequency changed to 50Mhz.\n");
|
|
}
|
|
|
|
pci_read_config_byte(dev, 0xCB, &disable);
|
|
|
|
if (disable & 0x02)
|
|
return;
|
|
|
|
pci_read_config_byte(dev, 0xCA, &write_enable);
|
|
pci_write_config_byte(dev, 0xCA, 0x57);
|
|
pci_write_config_byte(dev, 0xCB, disable | 0x02);
|
|
pci_write_config_byte(dev, 0xCA, write_enable);
|
|
|
|
dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n");
|
|
dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
|
|
|
|
}
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832);
|
|
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832);
|
|
#endif /*CONFIG_MMC_RICOH_MMC*/
|
|
|
|
#ifdef CONFIG_DMAR_TABLE
|
|
#define VTUNCERRMSK_REG 0x1ac
|
|
#define VTD_MSK_SPEC_ERRORS (1 << 31)
|
|
/*
|
|
* This is a quirk for masking vt-d spec defined errors to platform error
|
|
* handling logic. With out this, platforms using Intel 7500, 5500 chipsets
|
|
* (and the derivative chipsets like X58 etc) seem to generate NMI/SMI (based
|
|
* on the RAS config settings of the platform) when a vt-d fault happens.
|
|
* The resulting SMI caused the system to hang.
|
|
*
|
|
* VT-d spec related errors are already handled by the VT-d OS code, so no
|
|
* need to report the same error through other channels.
|
|
*/
|
|
static void vtd_mask_spec_errors(struct pci_dev *dev)
|
|
{
|
|
u32 word;
|
|
|
|
pci_read_config_dword(dev, VTUNCERRMSK_REG, &word);
|
|
pci_write_config_dword(dev, VTUNCERRMSK_REG, word | VTD_MSK_SPEC_ERRORS);
|
|
}
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, vtd_mask_spec_errors);
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors);
|
|
#endif
|
|
|
|
static void __devinit fixup_ti816x_class(struct pci_dev* dev)
|
|
{
|
|
/* TI 816x devices do not have class code set when in PCIe boot mode */
|
|
dev_info(&dev->dev, "Setting PCI class for 816x PCIe device\n");
|
|
dev->class = PCI_CLASS_MULTIMEDIA_VIDEO;
|
|
}
|
|
DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_TI, 0xb800,
|
|
PCI_CLASS_NOT_DEFINED, 0, fixup_ti816x_class);
|
|
|
|
/* Some PCIe devices do not work reliably with the claimed maximum
|
|
* payload size supported.
|
|
*/
|
|
static void __devinit fixup_mpss_256(struct pci_dev *dev)
|
|
{
|
|
dev->pcie_mpss = 1; /* 256 bytes */
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
|
|
PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0, fixup_mpss_256);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
|
|
PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
|
|
PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256);
|
|
|
|
/* Intel 5000 and 5100 Memory controllers have an errata with read completion
|
|
* coalescing (which is enabled by default on some BIOSes) and MPS of 256B.
|
|
* Since there is no way of knowing what the PCIE MPS on each fabric will be
|
|
* until all of the devices are discovered and buses walked, read completion
|
|
* coalescing must be disabled. Unfortunately, it cannot be re-enabled because
|
|
* it is possible to hotplug a device with MPS of 256B.
|
|
*/
|
|
static void __devinit quirk_intel_mc_errata(struct pci_dev *dev)
|
|
{
|
|
int err;
|
|
u16 rcc;
|
|
|
|
if (pcie_bus_config == PCIE_BUS_TUNE_OFF)
|
|
return;
|
|
|
|
/* Intel errata specifies bits to change but does not say what they are.
|
|
* Keeping them magical until such time as the registers and values can
|
|
* be explained.
|
|
*/
|
|
err = pci_read_config_word(dev, 0x48, &rcc);
|
|
if (err) {
|
|
dev_err(&dev->dev, "Error attempting to read the read "
|
|
"completion coalescing register.\n");
|
|
return;
|
|
}
|
|
|
|
if (!(rcc & (1 << 10)))
|
|
return;
|
|
|
|
rcc &= ~(1 << 10);
|
|
|
|
err = pci_write_config_word(dev, 0x48, rcc);
|
|
if (err) {
|
|
dev_err(&dev->dev, "Error attempting to write the read "
|
|
"completion coalescing register.\n");
|
|
return;
|
|
}
|
|
|
|
pr_info_once("Read completion coalescing disabled due to hardware "
|
|
"errata relating to 256B MPS.\n");
|
|
}
|
|
/* Intel 5000 series memory controllers and ports 2-7 */
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25c0, quirk_intel_mc_errata);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d0, quirk_intel_mc_errata);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d4, quirk_intel_mc_errata);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d8, quirk_intel_mc_errata);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_mc_errata);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_mc_errata);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_mc_errata);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_mc_errata);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_mc_errata);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_mc_errata);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_mc_errata);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_mc_errata);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_mc_errata);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_mc_errata);
|
|
/* Intel 5100 series memory controllers and ports 2-7 */
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65c0, quirk_intel_mc_errata);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e2, quirk_intel_mc_errata);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e3, quirk_intel_mc_errata);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e4, quirk_intel_mc_errata);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e5, quirk_intel_mc_errata);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e6, quirk_intel_mc_errata);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e7, quirk_intel_mc_errata);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f7, quirk_intel_mc_errata);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f8, quirk_intel_mc_errata);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
|
|
|
|
|
|
static void do_one_fixup_debug(void (*fn)(struct pci_dev *dev), struct pci_dev *dev)
|
|
{
|
|
ktime_t calltime, delta, rettime;
|
|
unsigned long long duration;
|
|
|
|
printk(KERN_DEBUG "calling %pF @ %i\n", fn, task_pid_nr(current));
|
|
calltime = ktime_get();
|
|
fn(dev);
|
|
rettime = ktime_get();
|
|
delta = ktime_sub(rettime, calltime);
|
|
duration = (unsigned long long) ktime_to_ns(delta) >> 10;
|
|
printk(KERN_DEBUG "pci fixup %pF returned after %lld usecs\n", fn,
|
|
duration);
|
|
}
|
|
|
|
/*
|
|
* Some BIOS implementations leave the Intel GPU interrupts enabled,
|
|
* even though no one is handling them (f.e. i915 driver is never loaded).
|
|
* Additionally the interrupt destination is not set up properly
|
|
* and the interrupt ends up -somewhere-.
|
|
*
|
|
* These spurious interrupts are "sticky" and the kernel disables
|
|
* the (shared) interrupt line after 100.000+ generated interrupts.
|
|
*
|
|
* Fix it by disabling the still enabled interrupts.
|
|
* This resolves crashes often seen on monitor unplug.
|
|
*/
|
|
#define I915_DEIER_REG 0x4400c
|
|
static void __devinit disable_igfx_irq(struct pci_dev *dev)
|
|
{
|
|
void __iomem *regs = pci_iomap(dev, 0, 0);
|
|
if (regs == NULL) {
|
|
dev_warn(&dev->dev, "igfx quirk: Can't iomap PCI device\n");
|
|
return;
|
|
}
|
|
|
|
/* Check if any interrupt line is still enabled */
|
|
if (readl(regs + I915_DEIER_REG) != 0) {
|
|
dev_warn(&dev->dev, "BIOS left Intel GPU interrupts enabled; "
|
|
"disabling\n");
|
|
|
|
writel(0, regs + I915_DEIER_REG);
|
|
}
|
|
|
|
pci_iounmap(dev, regs);
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
|
|
|
|
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
|
|
struct pci_fixup *end)
|
|
{
|
|
for (; f < end; f++)
|
|
if ((f->class == (u32) (dev->class >> f->class_shift) ||
|
|
f->class == (u32) PCI_ANY_ID) &&
|
|
(f->vendor == dev->vendor ||
|
|
f->vendor == (u16) PCI_ANY_ID) &&
|
|
(f->device == dev->device ||
|
|
f->device == (u16) PCI_ANY_ID)) {
|
|
dev_dbg(&dev->dev, "calling %pF\n", f->hook);
|
|
if (initcall_debug)
|
|
do_one_fixup_debug(f->hook, dev);
|
|
else
|
|
f->hook(dev);
|
|
}
|
|
}
|
|
|
|
extern struct pci_fixup __start_pci_fixups_early[];
|
|
extern struct pci_fixup __end_pci_fixups_early[];
|
|
extern struct pci_fixup __start_pci_fixups_header[];
|
|
extern struct pci_fixup __end_pci_fixups_header[];
|
|
extern struct pci_fixup __start_pci_fixups_final[];
|
|
extern struct pci_fixup __end_pci_fixups_final[];
|
|
extern struct pci_fixup __start_pci_fixups_enable[];
|
|
extern struct pci_fixup __end_pci_fixups_enable[];
|
|
extern struct pci_fixup __start_pci_fixups_resume[];
|
|
extern struct pci_fixup __end_pci_fixups_resume[];
|
|
extern struct pci_fixup __start_pci_fixups_resume_early[];
|
|
extern struct pci_fixup __end_pci_fixups_resume_early[];
|
|
extern struct pci_fixup __start_pci_fixups_suspend[];
|
|
extern struct pci_fixup __end_pci_fixups_suspend[];
|
|
|
|
|
|
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev)
|
|
{
|
|
struct pci_fixup *start, *end;
|
|
|
|
switch(pass) {
|
|
case pci_fixup_early:
|
|
start = __start_pci_fixups_early;
|
|
end = __end_pci_fixups_early;
|
|
break;
|
|
|
|
case pci_fixup_header:
|
|
start = __start_pci_fixups_header;
|
|
end = __end_pci_fixups_header;
|
|
break;
|
|
|
|
case pci_fixup_final:
|
|
start = __start_pci_fixups_final;
|
|
end = __end_pci_fixups_final;
|
|
break;
|
|
|
|
case pci_fixup_enable:
|
|
start = __start_pci_fixups_enable;
|
|
end = __end_pci_fixups_enable;
|
|
break;
|
|
|
|
case pci_fixup_resume:
|
|
start = __start_pci_fixups_resume;
|
|
end = __end_pci_fixups_resume;
|
|
break;
|
|
|
|
case pci_fixup_resume_early:
|
|
start = __start_pci_fixups_resume_early;
|
|
end = __end_pci_fixups_resume_early;
|
|
break;
|
|
|
|
case pci_fixup_suspend:
|
|
start = __start_pci_fixups_suspend;
|
|
end = __end_pci_fixups_suspend;
|
|
break;
|
|
|
|
default:
|
|
/* stupid compiler warning, you would think with an enum... */
|
|
return;
|
|
}
|
|
pci_do_fixups(dev, start, end);
|
|
}
|
|
EXPORT_SYMBOL(pci_fixup_device);
|
|
|
|
static int __init pci_apply_final_quirks(void)
|
|
{
|
|
struct pci_dev *dev = NULL;
|
|
u8 cls = 0;
|
|
u8 tmp;
|
|
|
|
if (pci_cache_line_size)
|
|
printk(KERN_DEBUG "PCI: CLS %u bytes\n",
|
|
pci_cache_line_size << 2);
|
|
|
|
for_each_pci_dev(dev) {
|
|
pci_fixup_device(pci_fixup_final, dev);
|
|
/*
|
|
* If arch hasn't set it explicitly yet, use the CLS
|
|
* value shared by all PCI devices. If there's a
|
|
* mismatch, fall back to the default value.
|
|
*/
|
|
if (!pci_cache_line_size) {
|
|
pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &tmp);
|
|
if (!cls)
|
|
cls = tmp;
|
|
if (!tmp || cls == tmp)
|
|
continue;
|
|
|
|
printk(KERN_DEBUG "PCI: CLS mismatch (%u != %u), "
|
|
"using %u bytes\n", cls << 2, tmp << 2,
|
|
pci_dfl_cache_line_size << 2);
|
|
pci_cache_line_size = pci_dfl_cache_line_size;
|
|
}
|
|
}
|
|
if (!pci_cache_line_size) {
|
|
printk(KERN_DEBUG "PCI: CLS %u bytes, default %u\n",
|
|
cls << 2, pci_dfl_cache_line_size << 2);
|
|
pci_cache_line_size = cls ? cls : pci_dfl_cache_line_size;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
fs_initcall_sync(pci_apply_final_quirks);
|
|
|
|
/*
|
|
* Followings are device-specific reset methods which can be used to
|
|
* reset a single function if other methods (e.g. FLR, PM D0->D3) are
|
|
* not available.
|
|
*/
|
|
static int reset_intel_generic_dev(struct pci_dev *dev, int probe)
|
|
{
|
|
int pos;
|
|
|
|
/* only implement PCI_CLASS_SERIAL_USB at present */
|
|
if (dev->class == PCI_CLASS_SERIAL_USB) {
|
|
pos = pci_find_capability(dev, PCI_CAP_ID_VNDR);
|
|
if (!pos)
|
|
return -ENOTTY;
|
|
|
|
if (probe)
|
|
return 0;
|
|
|
|
pci_write_config_byte(dev, pos + 0x4, 1);
|
|
msleep(100);
|
|
|
|
return 0;
|
|
} else {
|
|
return -ENOTTY;
|
|
}
|
|
}
|
|
|
|
static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, int probe)
|
|
{
|
|
int pos;
|
|
|
|
pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
|
|
if (!pos)
|
|
return -ENOTTY;
|
|
|
|
if (probe)
|
|
return 0;
|
|
|
|
pci_write_config_word(dev, pos + PCI_EXP_DEVCTL,
|
|
PCI_EXP_DEVCTL_BCR_FLR);
|
|
msleep(100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define PCI_DEVICE_ID_INTEL_82599_SFP_VF 0x10ed
|
|
|
|
static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF,
|
|
reset_intel_82599_sfp_virtfn },
|
|
{ PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
|
|
reset_intel_generic_dev },
|
|
{ 0 }
|
|
};
|
|
|
|
int pci_dev_specific_reset(struct pci_dev *dev, int probe)
|
|
{
|
|
const struct pci_dev_reset_methods *i;
|
|
|
|
for (i = pci_dev_reset_methods; i->reset; i++) {
|
|
if ((i->vendor == dev->vendor ||
|
|
i->vendor == (u16)PCI_ANY_ID) &&
|
|
(i->device == dev->device ||
|
|
i->device == (u16)PCI_ANY_ID))
|
|
return i->reset(dev, probe);
|
|
}
|
|
|
|
return -ENOTTY;
|
|
}
|