linux_dsm_epyc7002/arch/ia64/kernel/process.c
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

688 lines
18 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Architecture-specific setup.
*
* Copyright (C) 1998-2003 Hewlett-Packard Co
* David Mosberger-Tang <davidm@hpl.hp.com>
* 04/11/17 Ashok Raj <ashok.raj@intel.com> Added CPU Hotplug Support
*
* 2005-10-07 Keith Owens <kaos@sgi.com>
* Add notify_die() hooks.
*/
#include <linux/cpu.h>
#include <linux/pm.h>
#include <linux/elf.h>
#include <linux/errno.h>
#include <linux/kallsyms.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/notifier.h>
#include <linux/personality.h>
#include <linux/sched.h>
#include <linux/sched/debug.h>
#include <linux/sched/hotplug.h>
#include <linux/sched/task.h>
#include <linux/sched/task_stack.h>
#include <linux/stddef.h>
#include <linux/thread_info.h>
#include <linux/unistd.h>
#include <linux/efi.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/kdebug.h>
#include <linux/utsname.h>
#include <linux/tracehook.h>
#include <linux/rcupdate.h>
#include <asm/cpu.h>
#include <asm/delay.h>
#include <asm/elf.h>
#include <asm/irq.h>
#include <asm/kexec.h>
#include <asm/pgalloc.h>
#include <asm/processor.h>
#include <asm/sal.h>
#include <asm/switch_to.h>
#include <asm/tlbflush.h>
#include <linux/uaccess.h>
#include <asm/unwind.h>
#include <asm/user.h>
#include "entry.h"
#ifdef CONFIG_PERFMON
# include <asm/perfmon.h>
#endif
#include "sigframe.h"
void (*ia64_mark_idle)(int);
unsigned long boot_option_idle_override = IDLE_NO_OVERRIDE;
EXPORT_SYMBOL(boot_option_idle_override);
void (*pm_power_off) (void);
EXPORT_SYMBOL(pm_power_off);
void
ia64_do_show_stack (struct unw_frame_info *info, void *arg)
{
unsigned long ip, sp, bsp;
char buf[128]; /* don't make it so big that it overflows the stack! */
printk("\nCall Trace:\n");
do {
unw_get_ip(info, &ip);
if (ip == 0)
break;
unw_get_sp(info, &sp);
unw_get_bsp(info, &bsp);
snprintf(buf, sizeof(buf),
" [<%016lx>] %%s\n"
" sp=%016lx bsp=%016lx\n",
ip, sp, bsp);
print_symbol(buf, ip);
} while (unw_unwind(info) >= 0);
}
void
show_stack (struct task_struct *task, unsigned long *sp)
{
if (!task)
unw_init_running(ia64_do_show_stack, NULL);
else {
struct unw_frame_info info;
unw_init_from_blocked_task(&info, task);
ia64_do_show_stack(&info, NULL);
}
}
void
show_regs (struct pt_regs *regs)
{
unsigned long ip = regs->cr_iip + ia64_psr(regs)->ri;
print_modules();
printk("\n");
show_regs_print_info(KERN_DEFAULT);
printk("psr : %016lx ifs : %016lx ip : [<%016lx>] %s (%s)\n",
regs->cr_ipsr, regs->cr_ifs, ip, print_tainted(),
init_utsname()->release);
print_symbol("ip is at %s\n", ip);
printk("unat: %016lx pfs : %016lx rsc : %016lx\n",
regs->ar_unat, regs->ar_pfs, regs->ar_rsc);
printk("rnat: %016lx bsps: %016lx pr : %016lx\n",
regs->ar_rnat, regs->ar_bspstore, regs->pr);
printk("ldrs: %016lx ccv : %016lx fpsr: %016lx\n",
regs->loadrs, regs->ar_ccv, regs->ar_fpsr);
printk("csd : %016lx ssd : %016lx\n", regs->ar_csd, regs->ar_ssd);
printk("b0 : %016lx b6 : %016lx b7 : %016lx\n", regs->b0, regs->b6, regs->b7);
printk("f6 : %05lx%016lx f7 : %05lx%016lx\n",
regs->f6.u.bits[1], regs->f6.u.bits[0],
regs->f7.u.bits[1], regs->f7.u.bits[0]);
printk("f8 : %05lx%016lx f9 : %05lx%016lx\n",
regs->f8.u.bits[1], regs->f8.u.bits[0],
regs->f9.u.bits[1], regs->f9.u.bits[0]);
printk("f10 : %05lx%016lx f11 : %05lx%016lx\n",
regs->f10.u.bits[1], regs->f10.u.bits[0],
regs->f11.u.bits[1], regs->f11.u.bits[0]);
printk("r1 : %016lx r2 : %016lx r3 : %016lx\n", regs->r1, regs->r2, regs->r3);
printk("r8 : %016lx r9 : %016lx r10 : %016lx\n", regs->r8, regs->r9, regs->r10);
printk("r11 : %016lx r12 : %016lx r13 : %016lx\n", regs->r11, regs->r12, regs->r13);
printk("r14 : %016lx r15 : %016lx r16 : %016lx\n", regs->r14, regs->r15, regs->r16);
printk("r17 : %016lx r18 : %016lx r19 : %016lx\n", regs->r17, regs->r18, regs->r19);
printk("r20 : %016lx r21 : %016lx r22 : %016lx\n", regs->r20, regs->r21, regs->r22);
printk("r23 : %016lx r24 : %016lx r25 : %016lx\n", regs->r23, regs->r24, regs->r25);
printk("r26 : %016lx r27 : %016lx r28 : %016lx\n", regs->r26, regs->r27, regs->r28);
printk("r29 : %016lx r30 : %016lx r31 : %016lx\n", regs->r29, regs->r30, regs->r31);
if (user_mode(regs)) {
/* print the stacked registers */
unsigned long val, *bsp, ndirty;
int i, sof, is_nat = 0;
sof = regs->cr_ifs & 0x7f; /* size of frame */
ndirty = (regs->loadrs >> 19);
bsp = ia64_rse_skip_regs((unsigned long *) regs->ar_bspstore, ndirty);
for (i = 0; i < sof; ++i) {
get_user(val, (unsigned long __user *) ia64_rse_skip_regs(bsp, i));
printk("r%-3u:%c%016lx%s", 32 + i, is_nat ? '*' : ' ', val,
((i == sof - 1) || (i % 3) == 2) ? "\n" : " ");
}
} else
show_stack(NULL, NULL);
}
/* local support for deprecated console_print */
void
console_print(const char *s)
{
printk(KERN_EMERG "%s", s);
}
void
do_notify_resume_user(sigset_t *unused, struct sigscratch *scr, long in_syscall)
{
if (fsys_mode(current, &scr->pt)) {
/*
* defer signal-handling etc. until we return to
* privilege-level 0.
*/
if (!ia64_psr(&scr->pt)->lp)
ia64_psr(&scr->pt)->lp = 1;
return;
}
#ifdef CONFIG_PERFMON
if (current->thread.pfm_needs_checking)
/*
* Note: pfm_handle_work() allow us to call it with interrupts
* disabled, and may enable interrupts within the function.
*/
pfm_handle_work();
#endif
/* deal with pending signal delivery */
if (test_thread_flag(TIF_SIGPENDING)) {
local_irq_enable(); /* force interrupt enable */
ia64_do_signal(scr, in_syscall);
}
if (test_and_clear_thread_flag(TIF_NOTIFY_RESUME)) {
local_irq_enable(); /* force interrupt enable */
tracehook_notify_resume(&scr->pt);
}
/* copy user rbs to kernel rbs */
if (unlikely(test_thread_flag(TIF_RESTORE_RSE))) {
local_irq_enable(); /* force interrupt enable */
ia64_sync_krbs();
}
local_irq_disable(); /* force interrupt disable */
}
static int __init nohalt_setup(char * str)
{
cpu_idle_poll_ctrl(true);
return 1;
}
__setup("nohalt", nohalt_setup);
#ifdef CONFIG_HOTPLUG_CPU
/* We don't actually take CPU down, just spin without interrupts. */
static inline void play_dead(void)
{
unsigned int this_cpu = smp_processor_id();
/* Ack it */
__this_cpu_write(cpu_state, CPU_DEAD);
max_xtp();
local_irq_disable();
idle_task_exit();
ia64_jump_to_sal(&sal_boot_rendez_state[this_cpu]);
/*
* The above is a point of no-return, the processor is
* expected to be in SAL loop now.
*/
BUG();
}
#else
static inline void play_dead(void)
{
BUG();
}
#endif /* CONFIG_HOTPLUG_CPU */
void arch_cpu_idle_dead(void)
{
play_dead();
}
void arch_cpu_idle(void)
{
void (*mark_idle)(int) = ia64_mark_idle;
#ifdef CONFIG_SMP
min_xtp();
#endif
rmb();
if (mark_idle)
(*mark_idle)(1);
safe_halt();
if (mark_idle)
(*mark_idle)(0);
#ifdef CONFIG_SMP
normal_xtp();
#endif
}
void
ia64_save_extra (struct task_struct *task)
{
#ifdef CONFIG_PERFMON
unsigned long info;
#endif
if ((task->thread.flags & IA64_THREAD_DBG_VALID) != 0)
ia64_save_debug_regs(&task->thread.dbr[0]);
#ifdef CONFIG_PERFMON
if ((task->thread.flags & IA64_THREAD_PM_VALID) != 0)
pfm_save_regs(task);
info = __this_cpu_read(pfm_syst_info);
if (info & PFM_CPUINFO_SYST_WIDE)
pfm_syst_wide_update_task(task, info, 0);
#endif
}
void
ia64_load_extra (struct task_struct *task)
{
#ifdef CONFIG_PERFMON
unsigned long info;
#endif
if ((task->thread.flags & IA64_THREAD_DBG_VALID) != 0)
ia64_load_debug_regs(&task->thread.dbr[0]);
#ifdef CONFIG_PERFMON
if ((task->thread.flags & IA64_THREAD_PM_VALID) != 0)
pfm_load_regs(task);
info = __this_cpu_read(pfm_syst_info);
if (info & PFM_CPUINFO_SYST_WIDE)
pfm_syst_wide_update_task(task, info, 1);
#endif
}
/*
* Copy the state of an ia-64 thread.
*
* We get here through the following call chain:
*
* from user-level: from kernel:
*
* <clone syscall> <some kernel call frames>
* sys_clone :
* do_fork do_fork
* copy_thread copy_thread
*
* This means that the stack layout is as follows:
*
* +---------------------+ (highest addr)
* | struct pt_regs |
* +---------------------+
* | struct switch_stack |
* +---------------------+
* | |
* | memory stack |
* | | <-- sp (lowest addr)
* +---------------------+
*
* Observe that we copy the unat values that are in pt_regs and switch_stack. Spilling an
* integer to address X causes bit N in ar.unat to be set to the NaT bit of the register,
* with N=(X & 0x1ff)/8. Thus, copying the unat value preserves the NaT bits ONLY if the
* pt_regs structure in the parent is congruent to that of the child, modulo 512. Since
* the stack is page aligned and the page size is at least 4KB, this is always the case,
* so there is nothing to worry about.
*/
int
copy_thread(unsigned long clone_flags,
unsigned long user_stack_base, unsigned long user_stack_size,
struct task_struct *p)
{
extern char ia64_ret_from_clone;
struct switch_stack *child_stack, *stack;
unsigned long rbs, child_rbs, rbs_size;
struct pt_regs *child_ptregs;
struct pt_regs *regs = current_pt_regs();
int retval = 0;
child_ptregs = (struct pt_regs *) ((unsigned long) p + IA64_STK_OFFSET) - 1;
child_stack = (struct switch_stack *) child_ptregs - 1;
rbs = (unsigned long) current + IA64_RBS_OFFSET;
child_rbs = (unsigned long) p + IA64_RBS_OFFSET;
/* copy parts of thread_struct: */
p->thread.ksp = (unsigned long) child_stack - 16;
/*
* NOTE: The calling convention considers all floating point
* registers in the high partition (fph) to be scratch. Since
* the only way to get to this point is through a system call,
* we know that the values in fph are all dead. Hence, there
* is no need to inherit the fph state from the parent to the
* child and all we have to do is to make sure that
* IA64_THREAD_FPH_VALID is cleared in the child.
*
* XXX We could push this optimization a bit further by
* clearing IA64_THREAD_FPH_VALID on ANY system call.
* However, it's not clear this is worth doing. Also, it
* would be a slight deviation from the normal Linux system
* call behavior where scratch registers are preserved across
* system calls (unless used by the system call itself).
*/
# define THREAD_FLAGS_TO_CLEAR (IA64_THREAD_FPH_VALID | IA64_THREAD_DBG_VALID \
| IA64_THREAD_PM_VALID)
# define THREAD_FLAGS_TO_SET 0
p->thread.flags = ((current->thread.flags & ~THREAD_FLAGS_TO_CLEAR)
| THREAD_FLAGS_TO_SET);
ia64_drop_fpu(p); /* don't pick up stale state from a CPU's fph */
if (unlikely(p->flags & PF_KTHREAD)) {
if (unlikely(!user_stack_base)) {
/* fork_idle() called us */
return 0;
}
memset(child_stack, 0, sizeof(*child_ptregs) + sizeof(*child_stack));
child_stack->r4 = user_stack_base; /* payload */
child_stack->r5 = user_stack_size; /* argument */
/*
* Preserve PSR bits, except for bits 32-34 and 37-45,
* which we can't read.
*/
child_ptregs->cr_ipsr = ia64_getreg(_IA64_REG_PSR) | IA64_PSR_BN;
/* mark as valid, empty frame */
child_ptregs->cr_ifs = 1UL << 63;
child_stack->ar_fpsr = child_ptregs->ar_fpsr
= ia64_getreg(_IA64_REG_AR_FPSR);
child_stack->pr = (1 << PRED_KERNEL_STACK);
child_stack->ar_bspstore = child_rbs;
child_stack->b0 = (unsigned long) &ia64_ret_from_clone;
/* stop some PSR bits from being inherited.
* the psr.up/psr.pp bits must be cleared on fork but inherited on execve()
* therefore we must specify them explicitly here and not include them in
* IA64_PSR_BITS_TO_CLEAR.
*/
child_ptregs->cr_ipsr = ((child_ptregs->cr_ipsr | IA64_PSR_BITS_TO_SET)
& ~(IA64_PSR_BITS_TO_CLEAR | IA64_PSR_PP | IA64_PSR_UP));
return 0;
}
stack = ((struct switch_stack *) regs) - 1;
/* copy parent's switch_stack & pt_regs to child: */
memcpy(child_stack, stack, sizeof(*child_ptregs) + sizeof(*child_stack));
/* copy the parent's register backing store to the child: */
rbs_size = stack->ar_bspstore - rbs;
memcpy((void *) child_rbs, (void *) rbs, rbs_size);
if (clone_flags & CLONE_SETTLS)
child_ptregs->r13 = regs->r16; /* see sys_clone2() in entry.S */
if (user_stack_base) {
child_ptregs->r12 = user_stack_base + user_stack_size - 16;
child_ptregs->ar_bspstore = user_stack_base;
child_ptregs->ar_rnat = 0;
child_ptregs->loadrs = 0;
}
child_stack->ar_bspstore = child_rbs + rbs_size;
child_stack->b0 = (unsigned long) &ia64_ret_from_clone;
/* stop some PSR bits from being inherited.
* the psr.up/psr.pp bits must be cleared on fork but inherited on execve()
* therefore we must specify them explicitly here and not include them in
* IA64_PSR_BITS_TO_CLEAR.
*/
child_ptregs->cr_ipsr = ((child_ptregs->cr_ipsr | IA64_PSR_BITS_TO_SET)
& ~(IA64_PSR_BITS_TO_CLEAR | IA64_PSR_PP | IA64_PSR_UP));
#ifdef CONFIG_PERFMON
if (current->thread.pfm_context)
pfm_inherit(p, child_ptregs);
#endif
return retval;
}
static void
do_copy_task_regs (struct task_struct *task, struct unw_frame_info *info, void *arg)
{
unsigned long mask, sp, nat_bits = 0, ar_rnat, urbs_end, cfm;
unsigned long uninitialized_var(ip); /* GCC be quiet */
elf_greg_t *dst = arg;
struct pt_regs *pt;
char nat;
int i;
memset(dst, 0, sizeof(elf_gregset_t)); /* don't leak any kernel bits to user-level */
if (unw_unwind_to_user(info) < 0)
return;
unw_get_sp(info, &sp);
pt = (struct pt_regs *) (sp + 16);
urbs_end = ia64_get_user_rbs_end(task, pt, &cfm);
if (ia64_sync_user_rbs(task, info->sw, pt->ar_bspstore, urbs_end) < 0)
return;
ia64_peek(task, info->sw, urbs_end, (long) ia64_rse_rnat_addr((long *) urbs_end),
&ar_rnat);
/*
* coredump format:
* r0-r31
* NaT bits (for r0-r31; bit N == 1 iff rN is a NaT)
* predicate registers (p0-p63)
* b0-b7
* ip cfm user-mask
* ar.rsc ar.bsp ar.bspstore ar.rnat
* ar.ccv ar.unat ar.fpsr ar.pfs ar.lc ar.ec
*/
/* r0 is zero */
for (i = 1, mask = (1UL << i); i < 32; ++i) {
unw_get_gr(info, i, &dst[i], &nat);
if (nat)
nat_bits |= mask;
mask <<= 1;
}
dst[32] = nat_bits;
unw_get_pr(info, &dst[33]);
for (i = 0; i < 8; ++i)
unw_get_br(info, i, &dst[34 + i]);
unw_get_rp(info, &ip);
dst[42] = ip + ia64_psr(pt)->ri;
dst[43] = cfm;
dst[44] = pt->cr_ipsr & IA64_PSR_UM;
unw_get_ar(info, UNW_AR_RSC, &dst[45]);
/*
* For bsp and bspstore, unw_get_ar() would return the kernel
* addresses, but we need the user-level addresses instead:
*/
dst[46] = urbs_end; /* note: by convention PT_AR_BSP points to the end of the urbs! */
dst[47] = pt->ar_bspstore;
dst[48] = ar_rnat;
unw_get_ar(info, UNW_AR_CCV, &dst[49]);
unw_get_ar(info, UNW_AR_UNAT, &dst[50]);
unw_get_ar(info, UNW_AR_FPSR, &dst[51]);
dst[52] = pt->ar_pfs; /* UNW_AR_PFS is == to pt->cr_ifs for interrupt frames */
unw_get_ar(info, UNW_AR_LC, &dst[53]);
unw_get_ar(info, UNW_AR_EC, &dst[54]);
unw_get_ar(info, UNW_AR_CSD, &dst[55]);
unw_get_ar(info, UNW_AR_SSD, &dst[56]);
}
void
do_dump_task_fpu (struct task_struct *task, struct unw_frame_info *info, void *arg)
{
elf_fpreg_t *dst = arg;
int i;
memset(dst, 0, sizeof(elf_fpregset_t)); /* don't leak any "random" bits */
if (unw_unwind_to_user(info) < 0)
return;
/* f0 is 0.0, f1 is 1.0 */
for (i = 2; i < 32; ++i)
unw_get_fr(info, i, dst + i);
ia64_flush_fph(task);
if ((task->thread.flags & IA64_THREAD_FPH_VALID) != 0)
memcpy(dst + 32, task->thread.fph, 96*16);
}
void
do_copy_regs (struct unw_frame_info *info, void *arg)
{
do_copy_task_regs(current, info, arg);
}
void
do_dump_fpu (struct unw_frame_info *info, void *arg)
{
do_dump_task_fpu(current, info, arg);
}
void
ia64_elf_core_copy_regs (struct pt_regs *pt, elf_gregset_t dst)
{
unw_init_running(do_copy_regs, dst);
}
int
dump_fpu (struct pt_regs *pt, elf_fpregset_t dst)
{
unw_init_running(do_dump_fpu, dst);
return 1; /* f0-f31 are always valid so we always return 1 */
}
/*
* Flush thread state. This is called when a thread does an execve().
*/
void
flush_thread (void)
{
/* drop floating-point and debug-register state if it exists: */
current->thread.flags &= ~(IA64_THREAD_FPH_VALID | IA64_THREAD_DBG_VALID);
ia64_drop_fpu(current);
}
/*
* Clean up state associated with a thread. This is called when
* the thread calls exit().
*/
void
exit_thread (struct task_struct *tsk)
{
ia64_drop_fpu(tsk);
#ifdef CONFIG_PERFMON
/* if needed, stop monitoring and flush state to perfmon context */
if (tsk->thread.pfm_context)
pfm_exit_thread(tsk);
/* free debug register resources */
if (tsk->thread.flags & IA64_THREAD_DBG_VALID)
pfm_release_debug_registers(tsk);
#endif
}
unsigned long
get_wchan (struct task_struct *p)
{
struct unw_frame_info info;
unsigned long ip;
int count = 0;
if (!p || p == current || p->state == TASK_RUNNING)
return 0;
/*
* Note: p may not be a blocked task (it could be current or
* another process running on some other CPU. Rather than
* trying to determine if p is really blocked, we just assume
* it's blocked and rely on the unwind routines to fail
* gracefully if the process wasn't really blocked after all.
* --davidm 99/12/15
*/
unw_init_from_blocked_task(&info, p);
do {
if (p->state == TASK_RUNNING)
return 0;
if (unw_unwind(&info) < 0)
return 0;
unw_get_ip(&info, &ip);
if (!in_sched_functions(ip))
return ip;
} while (count++ < 16);
return 0;
}
void
cpu_halt (void)
{
pal_power_mgmt_info_u_t power_info[8];
unsigned long min_power;
int i, min_power_state;
if (ia64_pal_halt_info(power_info) != 0)
return;
min_power_state = 0;
min_power = power_info[0].pal_power_mgmt_info_s.power_consumption;
for (i = 1; i < 8; ++i)
if (power_info[i].pal_power_mgmt_info_s.im
&& power_info[i].pal_power_mgmt_info_s.power_consumption < min_power) {
min_power = power_info[i].pal_power_mgmt_info_s.power_consumption;
min_power_state = i;
}
while (1)
ia64_pal_halt(min_power_state);
}
void machine_shutdown(void)
{
#ifdef CONFIG_HOTPLUG_CPU
int cpu;
for_each_online_cpu(cpu) {
if (cpu != smp_processor_id())
cpu_down(cpu);
}
#endif
#ifdef CONFIG_KEXEC
kexec_disable_iosapic();
#endif
}
void
machine_restart (char *restart_cmd)
{
(void) notify_die(DIE_MACHINE_RESTART, restart_cmd, NULL, 0, 0, 0);
efi_reboot(REBOOT_WARM, NULL);
}
void
machine_halt (void)
{
(void) notify_die(DIE_MACHINE_HALT, "", NULL, 0, 0, 0);
cpu_halt();
}
void
machine_power_off (void)
{
if (pm_power_off)
pm_power_off();
machine_halt();
}