AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-14 05:36:42 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
1f815afcfc
linux_dsm_epyc7002/drivers/media/i2c/ov5640.c
Benoit Parrot 981e445454 media: ov5640: Make 2592x1944 mode only available at 15 fps 
The sensor data sheet clearly state that 2592x1944 only works at 15 fps
make sure we don't try to miss configure the pll out of acceptable
range.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-24 18:42:44 -03:00

3135 lines
84 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2014-2017 Mentor Graphics Inc.
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/ctype.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <media/v4l2-async.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-event.h>
#include <media/v4l2-fwnode.h>
#include <media/v4l2-subdev.h>
/* min/typical/max system clock (xclk) frequencies */
#define OV5640_XCLK_MIN 6000000
#define OV5640_XCLK_MAX 54000000
#define OV5640_DEFAULT_SLAVE_ID 0x3c
#define OV5640_REG_SYS_RESET02 0x3002
#define OV5640_REG_SYS_CLOCK_ENABLE02 0x3006
#define OV5640_REG_SYS_CTRL0 0x3008
#define OV5640_REG_CHIP_ID 0x300a
#define OV5640_REG_IO_MIPI_CTRL00 0x300e
#define OV5640_REG_PAD_OUTPUT_ENABLE01 0x3017
#define OV5640_REG_PAD_OUTPUT_ENABLE02 0x3018
#define OV5640_REG_PAD_OUTPUT00 0x3019
#define OV5640_REG_SYSTEM_CONTROL1 0x302e
#define OV5640_REG_SC_PLL_CTRL0 0x3034
#define OV5640_REG_SC_PLL_CTRL1 0x3035
#define OV5640_REG_SC_PLL_CTRL2 0x3036
#define OV5640_REG_SC_PLL_CTRL3 0x3037
#define OV5640_REG_SLAVE_ID 0x3100
#define OV5640_REG_SCCB_SYS_CTRL1 0x3103
#define OV5640_REG_SYS_ROOT_DIVIDER 0x3108
#define OV5640_REG_AWB_R_GAIN 0x3400
#define OV5640_REG_AWB_G_GAIN 0x3402
#define OV5640_REG_AWB_B_GAIN 0x3404
#define OV5640_REG_AWB_MANUAL_CTRL 0x3406
#define OV5640_REG_AEC_PK_EXPOSURE_HI 0x3500
#define OV5640_REG_AEC_PK_EXPOSURE_MED 0x3501
#define OV5640_REG_AEC_PK_EXPOSURE_LO 0x3502
#define OV5640_REG_AEC_PK_MANUAL 0x3503
#define OV5640_REG_AEC_PK_REAL_GAIN 0x350a
#define OV5640_REG_AEC_PK_VTS 0x350c
#define OV5640_REG_TIMING_DVPHO 0x3808
#define OV5640_REG_TIMING_DVPVO 0x380a
#define OV5640_REG_TIMING_HTS 0x380c
#define OV5640_REG_TIMING_VTS 0x380e
#define OV5640_REG_TIMING_TC_REG20 0x3820
#define OV5640_REG_TIMING_TC_REG21 0x3821
#define OV5640_REG_AEC_CTRL00 0x3a00
#define OV5640_REG_AEC_B50_STEP 0x3a08
#define OV5640_REG_AEC_B60_STEP 0x3a0a
#define OV5640_REG_AEC_CTRL0D 0x3a0d
#define OV5640_REG_AEC_CTRL0E 0x3a0e
#define OV5640_REG_AEC_CTRL0F 0x3a0f
#define OV5640_REG_AEC_CTRL10 0x3a10
#define OV5640_REG_AEC_CTRL11 0x3a11
#define OV5640_REG_AEC_CTRL1B 0x3a1b
#define OV5640_REG_AEC_CTRL1E 0x3a1e
#define OV5640_REG_AEC_CTRL1F 0x3a1f
#define OV5640_REG_HZ5060_CTRL00 0x3c00
#define OV5640_REG_HZ5060_CTRL01 0x3c01
#define OV5640_REG_SIGMADELTA_CTRL0C 0x3c0c
#define OV5640_REG_FRAME_CTRL01 0x4202
#define OV5640_REG_FORMAT_CONTROL00 0x4300
#define OV5640_REG_VFIFO_HSIZE 0x4602
#define OV5640_REG_VFIFO_VSIZE 0x4604
#define OV5640_REG_JPG_MODE_SELECT 0x4713
#define OV5640_REG_POLARITY_CTRL00 0x4740
#define OV5640_REG_MIPI_CTRL00 0x4800
#define OV5640_REG_DEBUG_MODE 0x4814
#define OV5640_REG_ISP_FORMAT_MUX_CTRL 0x501f
#define OV5640_REG_PRE_ISP_TEST_SET1 0x503d
#define OV5640_REG_SDE_CTRL0 0x5580
#define OV5640_REG_SDE_CTRL1 0x5581
#define OV5640_REG_SDE_CTRL3 0x5583
#define OV5640_REG_SDE_CTRL4 0x5584
#define OV5640_REG_SDE_CTRL5 0x5585
#define OV5640_REG_AVG_READOUT 0x56a1
enum ov5640_mode_id {
OV5640_MODE_QCIF_176_144 = 0,
OV5640_MODE_QVGA_320_240,
OV5640_MODE_VGA_640_480,
OV5640_MODE_NTSC_720_480,
OV5640_MODE_PAL_720_576,
OV5640_MODE_XGA_1024_768,
OV5640_MODE_720P_1280_720,
OV5640_MODE_1080P_1920_1080,
OV5640_MODE_QSXGA_2592_1944,
OV5640_NUM_MODES,
};
enum ov5640_frame_rate {
OV5640_15_FPS = 0,
OV5640_30_FPS,
OV5640_60_FPS,
OV5640_NUM_FRAMERATES,
};
enum ov5640_format_mux {
OV5640_FMT_MUX_YUV422 = 0,
OV5640_FMT_MUX_RGB,
OV5640_FMT_MUX_DITHER,
OV5640_FMT_MUX_RAW_DPC,
OV5640_FMT_MUX_SNR_RAW,
OV5640_FMT_MUX_RAW_CIP,
};
struct ov5640_pixfmt {
u32 code;
u32 colorspace;
};
static const struct ov5640_pixfmt ov5640_formats[] = {
{ MEDIA_BUS_FMT_JPEG_1X8, V4L2_COLORSPACE_JPEG, },
{ MEDIA_BUS_FMT_UYVY8_2X8, V4L2_COLORSPACE_SRGB, },
{ MEDIA_BUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_SRGB, },
{ MEDIA_BUS_FMT_RGB565_2X8_LE, V4L2_COLORSPACE_SRGB, },
{ MEDIA_BUS_FMT_RGB565_2X8_BE, V4L2_COLORSPACE_SRGB, },
{ MEDIA_BUS_FMT_SBGGR8_1X8, V4L2_COLORSPACE_SRGB, },
{ MEDIA_BUS_FMT_SGBRG8_1X8, V4L2_COLORSPACE_SRGB, },
{ MEDIA_BUS_FMT_SGRBG8_1X8, V4L2_COLORSPACE_SRGB, },
{ MEDIA_BUS_FMT_SRGGB8_1X8, V4L2_COLORSPACE_SRGB, },
};
/*
* FIXME: remove this when a subdev API becomes available
* to set the MIPI CSI-2 virtual channel.
*/
static unsigned int virtual_channel;
module_param(virtual_channel, uint, 0444);
MODULE_PARM_DESC(virtual_channel,
"MIPI CSI-2 virtual channel (0..3), default 0");
static const int ov5640_framerates[] = {
[OV5640_15_FPS] = 15,
[OV5640_30_FPS] = 30,
[OV5640_60_FPS] = 60,
};
/* regulator supplies */
static const char * const ov5640_supply_name[] = {
"DOVDD", /* Digital I/O (1.8V) supply */
"AVDD", /* Analog (2.8V) supply */
"DVDD", /* Digital Core (1.5V) supply */
};
#define OV5640_NUM_SUPPLIES ARRAY_SIZE(ov5640_supply_name)
/*
* Image size under 1280 * 960 are SUBSAMPLING
* Image size upper 1280 * 960 are SCALING
*/
enum ov5640_downsize_mode {
SUBSAMPLING,
SCALING,
};
struct reg_value {
u16 reg_addr;
u8 val;
u8 mask;
u32 delay_ms;
};
struct ov5640_mode_info {
enum ov5640_mode_id id;
enum ov5640_downsize_mode dn_mode;
u32 hact;
u32 htot;
u32 vact;
u32 vtot;
const struct reg_value *reg_data;
u32 reg_data_size;
};
struct ov5640_ctrls {
struct v4l2_ctrl_handler handler;
struct v4l2_ctrl *pixel_rate;
struct {
struct v4l2_ctrl *auto_exp;
struct v4l2_ctrl *exposure;
};
struct {
struct v4l2_ctrl *auto_wb;
struct v4l2_ctrl *blue_balance;
struct v4l2_ctrl *red_balance;
};
struct {
struct v4l2_ctrl *auto_gain;
struct v4l2_ctrl *gain;
};
struct v4l2_ctrl *brightness;
struct v4l2_ctrl *light_freq;
struct v4l2_ctrl *saturation;
struct v4l2_ctrl *contrast;
struct v4l2_ctrl *hue;
struct v4l2_ctrl *test_pattern;
struct v4l2_ctrl *hflip;
struct v4l2_ctrl *vflip;
};
struct ov5640_dev {
struct i2c_client *i2c_client;
struct v4l2_subdev sd;
struct media_pad pad;
struct v4l2_fwnode_endpoint ep; /* the parsed DT endpoint info */
struct clk *xclk; /* system clock to OV5640 */
u32 xclk_freq;
struct regulator_bulk_data supplies[OV5640_NUM_SUPPLIES];
struct gpio_desc *reset_gpio;
struct gpio_desc *pwdn_gpio;
bool upside_down;
/* lock to protect all members below */
struct mutex lock;
int power_count;
struct v4l2_mbus_framefmt fmt;
bool pending_fmt_change;
const struct ov5640_mode_info *current_mode;
const struct ov5640_mode_info *last_mode;
enum ov5640_frame_rate current_fr;
struct v4l2_fract frame_interval;
struct ov5640_ctrls ctrls;
u32 prev_sysclk, prev_hts;
u32 ae_low, ae_high, ae_target;
bool pending_mode_change;
bool streaming;
};
static inline struct ov5640_dev *to_ov5640_dev(struct v4l2_subdev *sd)
{
return container_of(sd, struct ov5640_dev, sd);
}
static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl)
{
return &container_of(ctrl->handler, struct ov5640_dev,
ctrls.handler)->sd;
}
/*
* FIXME: all of these register tables are likely filled with
* entries that set the register to their power-on default values,
* and which are otherwise not touched by this driver. Those entries
* should be identified and removed to speed register load time
* over i2c.
*/
/* YUV422 UYVY VGA@30fps */
static const struct reg_value ov5640_init_setting_30fps_VGA[] = {
{0x3103, 0x11, 0, 0}, {0x3008, 0x82, 0, 5}, {0x3008, 0x42, 0, 0},
{0x3103, 0x03, 0, 0}, {0x3017, 0x00, 0, 0}, {0x3018, 0x00, 0, 0},
{0x3630, 0x36, 0, 0},
{0x3631, 0x0e, 0, 0}, {0x3632, 0xe2, 0, 0}, {0x3633, 0x12, 0, 0},
{0x3621, 0xe0, 0, 0}, {0x3704, 0xa0, 0, 0}, {0x3703, 0x5a, 0, 0},
{0x3715, 0x78, 0, 0}, {0x3717, 0x01, 0, 0}, {0x370b, 0x60, 0, 0},
{0x3705, 0x1a, 0, 0}, {0x3905, 0x02, 0, 0}, {0x3906, 0x10, 0, 0},
{0x3901, 0x0a, 0, 0}, {0x3731, 0x12, 0, 0}, {0x3600, 0x08, 0, 0},
{0x3601, 0x33, 0, 0}, {0x302d, 0x60, 0, 0}, {0x3620, 0x52, 0, 0},
{0x371b, 0x20, 0, 0}, {0x471c, 0x50, 0, 0}, {0x3a13, 0x43, 0, 0},
{0x3a18, 0x00, 0, 0}, {0x3a19, 0xf8, 0, 0}, {0x3635, 0x13, 0, 0},
{0x3636, 0x03, 0, 0}, {0x3634, 0x40, 0, 0}, {0x3622, 0x01, 0, 0},
{0x3c01, 0xa4, 0, 0}, {0x3c04, 0x28, 0, 0}, {0x3c05, 0x98, 0, 0},
{0x3c06, 0x00, 0, 0}, {0x3c07, 0x08, 0, 0}, {0x3c08, 0x00, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3820, 0x41, 0, 0}, {0x3821, 0x07, 0, 0}, {0x3814, 0x31, 0, 0},
{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
{0x3802, 0x00, 0, 0}, {0x3803, 0x04, 0, 0}, {0x3804, 0x0a, 0, 0},
{0x3805, 0x3f, 0, 0}, {0x3806, 0x07, 0, 0}, {0x3807, 0x9b, 0, 0},
{0x3810, 0x00, 0, 0},
{0x3811, 0x10, 0, 0}, {0x3812, 0x00, 0, 0}, {0x3813, 0x06, 0, 0},
{0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0},
{0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x03, 0, 0},
{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
{0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, {0x3000, 0x00, 0, 0},
{0x3002, 0x1c, 0, 0}, {0x3004, 0xff, 0, 0}, {0x3006, 0xc3, 0, 0},
{0x302e, 0x08, 0, 0}, {0x4300, 0x3f, 0, 0},
{0x501f, 0x00, 0, 0}, {0x4407, 0x04, 0, 0},
{0x440e, 0x00, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
{0x4837, 0x0a, 0, 0}, {0x3824, 0x02, 0, 0},
{0x5000, 0xa7, 0, 0}, {0x5001, 0xa3, 0, 0}, {0x5180, 0xff, 0, 0},
{0x5181, 0xf2, 0, 0}, {0x5182, 0x00, 0, 0}, {0x5183, 0x14, 0, 0},
{0x5184, 0x25, 0, 0}, {0x5185, 0x24, 0, 0}, {0x5186, 0x09, 0, 0},
{0x5187, 0x09, 0, 0}, {0x5188, 0x09, 0, 0}, {0x5189, 0x88, 0, 0},
{0x518a, 0x54, 0, 0}, {0x518b, 0xee, 0, 0}, {0x518c, 0xb2, 0, 0},
{0x518d, 0x50, 0, 0}, {0x518e, 0x34, 0, 0}, {0x518f, 0x6b, 0, 0},
{0x5190, 0x46, 0, 0}, {0x5191, 0xf8, 0, 0}, {0x5192, 0x04, 0, 0},
{0x5193, 0x70, 0, 0}, {0x5194, 0xf0, 0, 0}, {0x5195, 0xf0, 0, 0},
{0x5196, 0x03, 0, 0}, {0x5197, 0x01, 0, 0}, {0x5198, 0x04, 0, 0},
{0x5199, 0x6c, 0, 0}, {0x519a, 0x04, 0, 0}, {0x519b, 0x00, 0, 0},
{0x519c, 0x09, 0, 0}, {0x519d, 0x2b, 0, 0}, {0x519e, 0x38, 0, 0},
{0x5381, 0x1e, 0, 0}, {0x5382, 0x5b, 0, 0}, {0x5383, 0x08, 0, 0},
{0x5384, 0x0a, 0, 0}, {0x5385, 0x7e, 0, 0}, {0x5386, 0x88, 0, 0},
{0x5387, 0x7c, 0, 0}, {0x5388, 0x6c, 0, 0}, {0x5389, 0x10, 0, 0},
{0x538a, 0x01, 0, 0}, {0x538b, 0x98, 0, 0}, {0x5300, 0x08, 0, 0},
{0x5301, 0x30, 0, 0}, {0x5302, 0x10, 0, 0}, {0x5303, 0x00, 0, 0},
{0x5304, 0x08, 0, 0}, {0x5305, 0x30, 0, 0}, {0x5306, 0x08, 0, 0},
{0x5307, 0x16, 0, 0}, {0x5309, 0x08, 0, 0}, {0x530a, 0x30, 0, 0},
{0x530b, 0x04, 0, 0}, {0x530c, 0x06, 0, 0}, {0x5480, 0x01, 0, 0},
{0x5481, 0x08, 0, 0}, {0x5482, 0x14, 0, 0}, {0x5483, 0x28, 0, 0},
{0x5484, 0x51, 0, 0}, {0x5485, 0x65, 0, 0}, {0x5486, 0x71, 0, 0},
{0x5487, 0x7d, 0, 0}, {0x5488, 0x87, 0, 0}, {0x5489, 0x91, 0, 0},
{0x548a, 0x9a, 0, 0}, {0x548b, 0xaa, 0, 0}, {0x548c, 0xb8, 0, 0},
{0x548d, 0xcd, 0, 0}, {0x548e, 0xdd, 0, 0}, {0x548f, 0xea, 0, 0},
{0x5490, 0x1d, 0, 0}, {0x5580, 0x02, 0, 0}, {0x5583, 0x40, 0, 0},
{0x5584, 0x10, 0, 0}, {0x5589, 0x10, 0, 0}, {0x558a, 0x00, 0, 0},
{0x558b, 0xf8, 0, 0}, {0x5800, 0x23, 0, 0}, {0x5801, 0x14, 0, 0},
{0x5802, 0x0f, 0, 0}, {0x5803, 0x0f, 0, 0}, {0x5804, 0x12, 0, 0},
{0x5805, 0x26, 0, 0}, {0x5806, 0x0c, 0, 0}, {0x5807, 0x08, 0, 0},
{0x5808, 0x05, 0, 0}, {0x5809, 0x05, 0, 0}, {0x580a, 0x08, 0, 0},
{0x580b, 0x0d, 0, 0}, {0x580c, 0x08, 0, 0}, {0x580d, 0x03, 0, 0},
{0x580e, 0x00, 0, 0}, {0x580f, 0x00, 0, 0}, {0x5810, 0x03, 0, 0},
{0x5811, 0x09, 0, 0}, {0x5812, 0x07, 0, 0}, {0x5813, 0x03, 0, 0},
{0x5814, 0x00, 0, 0}, {0x5815, 0x01, 0, 0}, {0x5816, 0x03, 0, 0},
{0x5817, 0x08, 0, 0}, {0x5818, 0x0d, 0, 0}, {0x5819, 0x08, 0, 0},
{0x581a, 0x05, 0, 0}, {0x581b, 0x06, 0, 0}, {0x581c, 0x08, 0, 0},
{0x581d, 0x0e, 0, 0}, {0x581e, 0x29, 0, 0}, {0x581f, 0x17, 0, 0},
{0x5820, 0x11, 0, 0}, {0x5821, 0x11, 0, 0}, {0x5822, 0x15, 0, 0},
{0x5823, 0x28, 0, 0}, {0x5824, 0x46, 0, 0}, {0x5825, 0x26, 0, 0},
{0x5826, 0x08, 0, 0}, {0x5827, 0x26, 0, 0}, {0x5828, 0x64, 0, 0},
{0x5829, 0x26, 0, 0}, {0x582a, 0x24, 0, 0}, {0x582b, 0x22, 0, 0},
{0x582c, 0x24, 0, 0}, {0x582d, 0x24, 0, 0}, {0x582e, 0x06, 0, 0},
{0x582f, 0x22, 0, 0}, {0x5830, 0x40, 0, 0}, {0x5831, 0x42, 0, 0},
{0x5832, 0x24, 0, 0}, {0x5833, 0x26, 0, 0}, {0x5834, 0x24, 0, 0},
{0x5835, 0x22, 0, 0}, {0x5836, 0x22, 0, 0}, {0x5837, 0x26, 0, 0},
{0x5838, 0x44, 0, 0}, {0x5839, 0x24, 0, 0}, {0x583a, 0x26, 0, 0},
{0x583b, 0x28, 0, 0}, {0x583c, 0x42, 0, 0}, {0x583d, 0xce, 0, 0},
{0x5025, 0x00, 0, 0}, {0x3a0f, 0x30, 0, 0}, {0x3a10, 0x28, 0, 0},
{0x3a1b, 0x30, 0, 0}, {0x3a1e, 0x26, 0, 0}, {0x3a11, 0x60, 0, 0},
{0x3a1f, 0x14, 0, 0}, {0x3008, 0x02, 0, 0}, {0x3c00, 0x04, 0, 300},
};
static const struct reg_value ov5640_setting_VGA_640_480[] = {
{0x3c07, 0x08, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3814, 0x31, 0, 0},
{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
{0x3802, 0x00, 0, 0}, {0x3803, 0x04, 0, 0}, {0x3804, 0x0a, 0, 0},
{0x3805, 0x3f, 0, 0}, {0x3806, 0x07, 0, 0}, {0x3807, 0x9b, 0, 0},
{0x3810, 0x00, 0, 0},
{0x3811, 0x10, 0, 0}, {0x3812, 0x00, 0, 0}, {0x3813, 0x06, 0, 0},
{0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0},
{0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x03, 0, 0},
{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
{0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0},
{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
};
static const struct reg_value ov5640_setting_XGA_1024_768[] = {
{0x3c07, 0x08, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3814, 0x31, 0, 0},
{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
{0x3802, 0x00, 0, 0}, {0x3803, 0x04, 0, 0}, {0x3804, 0x0a, 0, 0},
{0x3805, 0x3f, 0, 0}, {0x3806, 0x07, 0, 0}, {0x3807, 0x9b, 0, 0},
{0x3810, 0x00, 0, 0},
{0x3811, 0x10, 0, 0}, {0x3812, 0x00, 0, 0}, {0x3813, 0x06, 0, 0},
{0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0},
{0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x03, 0, 0},
{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
{0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0},
{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
};
static const struct reg_value ov5640_setting_QVGA_320_240[] = {
{0x3c07, 0x08, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3814, 0x31, 0, 0},
{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
{0x3802, 0x00, 0, 0}, {0x3803, 0x04, 0, 0}, {0x3804, 0x0a, 0, 0},
{0x3805, 0x3f, 0, 0}, {0x3806, 0x07, 0, 0}, {0x3807, 0x9b, 0, 0},
{0x3810, 0x00, 0, 0},
{0x3811, 0x10, 0, 0}, {0x3812, 0x00, 0, 0}, {0x3813, 0x06, 0, 0},
{0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0},
{0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x03, 0, 0},
{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
{0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0},
{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
};
static const struct reg_value ov5640_setting_QCIF_176_144[] = {
{0x3c07, 0x08, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3814, 0x31, 0, 0},
{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
{0x3802, 0x00, 0, 0}, {0x3803, 0x04, 0, 0}, {0x3804, 0x0a, 0, 0},
{0x3805, 0x3f, 0, 0}, {0x3806, 0x07, 0, 0}, {0x3807, 0x9b, 0, 0},
{0x3810, 0x00, 0, 0},
{0x3811, 0x10, 0, 0}, {0x3812, 0x00, 0, 0}, {0x3813, 0x06, 0, 0},
{0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0},
{0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x03, 0, 0},
{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
{0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0},
{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
};
static const struct reg_value ov5640_setting_NTSC_720_480[] = {
{0x3c07, 0x08, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3814, 0x31, 0, 0},
{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
{0x3802, 0x00, 0, 0}, {0x3803, 0x04, 0, 0}, {0x3804, 0x0a, 0, 0},
{0x3805, 0x3f, 0, 0}, {0x3806, 0x07, 0, 0}, {0x3807, 0x9b, 0, 0},
{0x3810, 0x00, 0, 0},
{0x3811, 0x10, 0, 0}, {0x3812, 0x00, 0, 0}, {0x3813, 0x3c, 0, 0},
{0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0},
{0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x03, 0, 0},
{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
{0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0},
{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
};
static const struct reg_value ov5640_setting_PAL_720_576[] = {
{0x3c07, 0x08, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3814, 0x31, 0, 0},
{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
{0x3802, 0x00, 0, 0}, {0x3803, 0x04, 0, 0}, {0x3804, 0x0a, 0, 0},
{0x3805, 0x3f, 0, 0}, {0x3806, 0x07, 0, 0}, {0x3807, 0x9b, 0, 0},
{0x3810, 0x00, 0, 0},
{0x3811, 0x38, 0, 0}, {0x3812, 0x00, 0, 0}, {0x3813, 0x06, 0, 0},
{0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0},
{0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x03, 0, 0},
{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
{0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0},
{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
};
static const struct reg_value ov5640_setting_720P_1280_720[] = {
{0x3c07, 0x07, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3814, 0x31, 0, 0},
{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
{0x3802, 0x00, 0, 0}, {0x3803, 0xfa, 0, 0}, {0x3804, 0x0a, 0, 0},
{0x3805, 0x3f, 0, 0}, {0x3806, 0x06, 0, 0}, {0x3807, 0xa9, 0, 0},
{0x3810, 0x00, 0, 0},
{0x3811, 0x10, 0, 0}, {0x3812, 0x00, 0, 0}, {0x3813, 0x04, 0, 0},
{0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0},
{0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x02, 0, 0},
{0x3a03, 0xe4, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0xbc, 0, 0},
{0x3a0a, 0x01, 0, 0}, {0x3a0b, 0x72, 0, 0}, {0x3a0e, 0x01, 0, 0},
{0x3a0d, 0x02, 0, 0}, {0x3a14, 0x02, 0, 0}, {0x3a15, 0xe4, 0, 0},
{0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0},
{0x4407, 0x04, 0, 0}, {0x460b, 0x37, 0, 0}, {0x460c, 0x20, 0, 0},
{0x3824, 0x04, 0, 0}, {0x5001, 0x83, 0, 0},
};
static const struct reg_value ov5640_setting_1080P_1920_1080[] = {
{0x3c07, 0x08, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3814, 0x11, 0, 0},
{0x3815, 0x11, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
{0x3802, 0x00, 0, 0}, {0x3803, 0x00, 0, 0}, {0x3804, 0x0a, 0, 0},
{0x3805, 0x3f, 0, 0}, {0x3806, 0x07, 0, 0}, {0x3807, 0x9f, 0, 0},
{0x3810, 0x00, 0, 0},
{0x3811, 0x10, 0, 0}, {0x3812, 0x00, 0, 0}, {0x3813, 0x04, 0, 0},
{0x3618, 0x04, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x21, 0, 0},
{0x3709, 0x12, 0, 0}, {0x370c, 0x00, 0, 0}, {0x3a02, 0x03, 0, 0},
{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
{0x4001, 0x02, 0, 0}, {0x4004, 0x06, 0, 0},
{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
{0x3824, 0x02, 0, 0}, {0x5001, 0x83, 0, 0},
{0x3c07, 0x07, 0, 0}, {0x3c08, 0x00, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3800, 0x01, 0, 0}, {0x3801, 0x50, 0, 0}, {0x3802, 0x01, 0, 0},
{0x3803, 0xb2, 0, 0}, {0x3804, 0x08, 0, 0}, {0x3805, 0xef, 0, 0},
{0x3806, 0x05, 0, 0}, {0x3807, 0xf1, 0, 0},
{0x3612, 0x2b, 0, 0}, {0x3708, 0x64, 0, 0},
{0x3a02, 0x04, 0, 0}, {0x3a03, 0x60, 0, 0}, {0x3a08, 0x01, 0, 0},
{0x3a09, 0x50, 0, 0}, {0x3a0a, 0x01, 0, 0}, {0x3a0b, 0x18, 0, 0},
{0x3a0e, 0x03, 0, 0}, {0x3a0d, 0x04, 0, 0}, {0x3a14, 0x04, 0, 0},
{0x3a15, 0x60, 0, 0}, {0x4407, 0x04, 0, 0},
{0x460b, 0x37, 0, 0}, {0x460c, 0x20, 0, 0}, {0x3824, 0x04, 0, 0},
{0x4005, 0x1a, 0, 0},
};
static const struct reg_value ov5640_setting_QSXGA_2592_1944[] = {
{0x3c07, 0x08, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3814, 0x11, 0, 0},
{0x3815, 0x11, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
{0x3802, 0x00, 0, 0}, {0x3803, 0x00, 0, 0}, {0x3804, 0x0a, 0, 0},
{0x3805, 0x3f, 0, 0}, {0x3806, 0x07, 0, 0}, {0x3807, 0x9f, 0, 0},
{0x3810, 0x00, 0, 0},
{0x3811, 0x10, 0, 0}, {0x3812, 0x00, 0, 0}, {0x3813, 0x04, 0, 0},
{0x3618, 0x04, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x21, 0, 0},
{0x3709, 0x12, 0, 0}, {0x370c, 0x00, 0, 0}, {0x3a02, 0x03, 0, 0},
{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
{0x4001, 0x02, 0, 0}, {0x4004, 0x06, 0, 0},
{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
{0x3824, 0x02, 0, 0}, {0x5001, 0x83, 0, 70},
};
/* power-on sensor init reg table */
static const struct ov5640_mode_info ov5640_mode_init_data = {
0, SUBSAMPLING, 640, 1896, 480, 984,
ov5640_init_setting_30fps_VGA,
ARRAY_SIZE(ov5640_init_setting_30fps_VGA),
};
static const struct ov5640_mode_info
ov5640_mode_data[OV5640_NUM_MODES] = {
{OV5640_MODE_QCIF_176_144, SUBSAMPLING,
176, 1896, 144, 984,
ov5640_setting_QCIF_176_144,
ARRAY_SIZE(ov5640_setting_QCIF_176_144)},
{OV5640_MODE_QVGA_320_240, SUBSAMPLING,
320, 1896, 240, 984,
ov5640_setting_QVGA_320_240,
ARRAY_SIZE(ov5640_setting_QVGA_320_240)},
{OV5640_MODE_VGA_640_480, SUBSAMPLING,
640, 1896, 480, 1080,
ov5640_setting_VGA_640_480,
ARRAY_SIZE(ov5640_setting_VGA_640_480)},
{OV5640_MODE_NTSC_720_480, SUBSAMPLING,
720, 1896, 480, 984,
ov5640_setting_NTSC_720_480,
ARRAY_SIZE(ov5640_setting_NTSC_720_480)},
{OV5640_MODE_PAL_720_576, SUBSAMPLING,
720, 1896, 576, 984,
ov5640_setting_PAL_720_576,
ARRAY_SIZE(ov5640_setting_PAL_720_576)},
{OV5640_MODE_XGA_1024_768, SUBSAMPLING,
1024, 1896, 768, 1080,
ov5640_setting_XGA_1024_768,
ARRAY_SIZE(ov5640_setting_XGA_1024_768)},
{OV5640_MODE_720P_1280_720, SUBSAMPLING,
1280, 1892, 720, 740,
ov5640_setting_720P_1280_720,
ARRAY_SIZE(ov5640_setting_720P_1280_720)},
{OV5640_MODE_1080P_1920_1080, SCALING,
1920, 2500, 1080, 1120,
ov5640_setting_1080P_1920_1080,
ARRAY_SIZE(ov5640_setting_1080P_1920_1080)},
{OV5640_MODE_QSXGA_2592_1944, SCALING,
2592, 2844, 1944, 1968,
ov5640_setting_QSXGA_2592_1944,
ARRAY_SIZE(ov5640_setting_QSXGA_2592_1944)},
};
static int ov5640_init_slave_id(struct ov5640_dev *sensor)
{
struct i2c_client *client = sensor->i2c_client;
struct i2c_msg msg;
u8 buf[3];
int ret;
if (client->addr == OV5640_DEFAULT_SLAVE_ID)
return 0;
buf[0] = OV5640_REG_SLAVE_ID >> 8;
buf[1] = OV5640_REG_SLAVE_ID & 0xff;
buf[2] = client->addr << 1;
msg.addr = OV5640_DEFAULT_SLAVE_ID;
msg.flags = 0;
msg.buf = buf;
msg.len = sizeof(buf);
ret = i2c_transfer(client->adapter, &msg, 1);
if (ret < 0) {
dev_err(&client->dev, "%s: failed with %d\n", __func__, ret);
return ret;
}
return 0;
}
static int ov5640_write_reg(struct ov5640_dev *sensor, u16 reg, u8 val)
{
struct i2c_client *client = sensor->i2c_client;
struct i2c_msg msg;
u8 buf[3];
int ret;
buf[0] = reg >> 8;
buf[1] = reg & 0xff;
buf[2] = val;
msg.addr = client->addr;
msg.flags = client->flags;
msg.buf = buf;
msg.len = sizeof(buf);
ret = i2c_transfer(client->adapter, &msg, 1);
if (ret < 0) {
dev_err(&client->dev, "%s: error: reg=%x, val=%x\n",
__func__, reg, val);
return ret;
}
return 0;
}
static int ov5640_read_reg(struct ov5640_dev *sensor, u16 reg, u8 *val)
{
struct i2c_client *client = sensor->i2c_client;
struct i2c_msg msg[2];
u8 buf[2];
int ret;
buf[0] = reg >> 8;
buf[1] = reg & 0xff;
msg[0].addr = client->addr;
msg[0].flags = client->flags;
msg[0].buf = buf;
msg[0].len = sizeof(buf);
msg[1].addr = client->addr;
msg[1].flags = client->flags | I2C_M_RD;
msg[1].buf = buf;
msg[1].len = 1;
ret = i2c_transfer(client->adapter, msg, 2);
if (ret < 0) {
dev_err(&client->dev, "%s: error: reg=%x\n",
__func__, reg);
return ret;
}
*val = buf[0];
return 0;
}
static int ov5640_read_reg16(struct ov5640_dev *sensor, u16 reg, u16 *val)
{
u8 hi, lo;
int ret;
ret = ov5640_read_reg(sensor, reg, &hi);
if (ret)
return ret;
ret = ov5640_read_reg(sensor, reg + 1, &lo);
if (ret)
return ret;
*val = ((u16)hi << 8) | (u16)lo;
return 0;
}
static int ov5640_write_reg16(struct ov5640_dev *sensor, u16 reg, u16 val)
{
int ret;
ret = ov5640_write_reg(sensor, reg, val >> 8);
if (ret)
return ret;
return ov5640_write_reg(sensor, reg + 1, val & 0xff);
}
static int ov5640_mod_reg(struct ov5640_dev *sensor, u16 reg,
u8 mask, u8 val)
{
u8 readval;
int ret;
ret = ov5640_read_reg(sensor, reg, &readval);
if (ret)
return ret;
readval &= ~mask;
val &= mask;
val |= readval;
return ov5640_write_reg(sensor, reg, val);
}
/*
* After trying the various combinations, reading various
* documentations spread around the net, and from the various
* feedback, the clock tree is probably as follows:
*
* +--------------+
* | Ext. Clock |
* +-+------------+
* | +----------+
* +->| PLL1 | - reg 0x3036, for the multiplier
* +-+--------+ - reg 0x3037, bits 0-3 for the pre-divider
* | +--------------+
* +->| System Clock | - reg 0x3035, bits 4-7
* +-+------------+
* | +--------------+
* +->| MIPI Divider | - reg 0x3035, bits 0-3
* | +-+------------+
* | +----------------> MIPI SCLK
* | + +-----+
* | +->| / 2 |-------> MIPI BIT CLK
* | +-----+
* | +--------------+
* +->| PLL Root Div | - reg 0x3037, bit 4
* +-+------------+
* | +---------+
* +->| Bit Div | - reg 0x3035, bits 0-3
* +-+-------+
* | +-------------+
* +->| SCLK Div | - reg 0x3108, bits 0-1
* | +-+-----------+
* | +---------------> SCLK
* | +-------------+
* +->| SCLK 2X Div | - reg 0x3108, bits 2-3
* | +-+-----------+
* | +---------------> SCLK 2X
* | +-------------+
* +->| PCLK Div | - reg 0x3108, bits 4-5
* ++------------+
* + +-----------+
* +->| P_DIV | - reg 0x3035, bits 0-3
* +-----+-----+
* +------------> PCLK
*
* This is deviating from the datasheet at least for the register
* 0x3108, since it's said here that the PCLK would be clocked from
* the PLL.
*
* There seems to be also (unverified) constraints:
* - the PLL pre-divider output rate should be in the 4-27MHz range
* - the PLL multiplier output rate should be in the 500-1000MHz range
* - PCLK >= SCLK * 2 in YUV, >= SCLK in Raw or JPEG
*
* In the two latter cases, these constraints are met since our
* factors are hardcoded. If we were to change that, we would need to
* take this into account. The only varying parts are the PLL
* multiplier and the system clock divider, which are shared between
* all these clocks so won't cause any issue.
*/
/*
* This is supposed to be ranging from 1 to 8, but the value is always
* set to 3 in the vendor kernels.
*/
#define OV5640_PLL_PREDIV 3
#define OV5640_PLL_MULT_MIN 4
#define OV5640_PLL_MULT_MAX 252
/*
* This is supposed to be ranging from 1 to 16, but the value is
* always set to either 1 or 2 in the vendor kernels.
*/
#define OV5640_SYSDIV_MIN 1
#define OV5640_SYSDIV_MAX 16
/*
* Hardcode these values for scaler and non-scaler modes.
* FIXME: to be re-calcualted for 1 data lanes setups
*/
#define OV5640_MIPI_DIV_PCLK 2
#define OV5640_MIPI_DIV_SCLK 1
/*
* This is supposed to be ranging from 1 to 2, but the value is always
* set to 2 in the vendor kernels.
*/
#define OV5640_PLL_ROOT_DIV 2
#define OV5640_PLL_CTRL3_PLL_ROOT_DIV_2 BIT(4)
/*
* We only supports 8-bit formats at the moment
*/
#define OV5640_BIT_DIV 2
#define OV5640_PLL_CTRL0_MIPI_MODE_8BIT 0x08
/*
* This is supposed to be ranging from 1 to 8, but the value is always
* set to 2 in the vendor kernels.
*/
#define OV5640_SCLK_ROOT_DIV 2
/*
* This is hardcoded so that the consistency is maintained between SCLK and
* SCLK 2x.
*/
#define OV5640_SCLK2X_ROOT_DIV (OV5640_SCLK_ROOT_DIV / 2)
/*
* This is supposed to be ranging from 1 to 8, but the value is always
* set to 1 in the vendor kernels.
*/
#define OV5640_PCLK_ROOT_DIV 1
#define OV5640_PLL_SYS_ROOT_DIVIDER_BYPASS 0x00
static unsigned long ov5640_compute_sys_clk(struct ov5640_dev *sensor,
u8 pll_prediv, u8 pll_mult,
u8 sysdiv)
{
unsigned long sysclk = sensor->xclk_freq / pll_prediv * pll_mult;
/* PLL1 output cannot exceed 1GHz. */
if (sysclk / 1000000 > 1000)
return 0;
return sysclk / sysdiv;
}
static unsigned long ov5640_calc_sys_clk(struct ov5640_dev *sensor,
unsigned long rate,
u8 *pll_prediv, u8 *pll_mult,
u8 *sysdiv)
{
unsigned long best = ~0;
u8 best_sysdiv = 1, best_mult = 1;
u8 _sysdiv, _pll_mult;
for (_sysdiv = OV5640_SYSDIV_MIN;
_sysdiv <= OV5640_SYSDIV_MAX;
_sysdiv++) {
for (_pll_mult = OV5640_PLL_MULT_MIN;
_pll_mult <= OV5640_PLL_MULT_MAX;
_pll_mult++) {
unsigned long _rate;
/*
* The PLL multiplier cannot be odd if above
* 127.
*/
if (_pll_mult > 127 && (_pll_mult % 2))
continue;
_rate = ov5640_compute_sys_clk(sensor,
OV5640_PLL_PREDIV,
_pll_mult, _sysdiv);
/*
* We have reached the maximum allowed PLL1 output,
* increase sysdiv.
*/
if (!rate)
break;
/*
* Prefer rates above the expected clock rate than
* below, even if that means being less precise.
*/
if (_rate < rate)
continue;
if (abs(rate - _rate) < abs(rate - best)) {
best = _rate;
best_sysdiv = _sysdiv;
best_mult = _pll_mult;
}
if (_rate == rate)
goto out;
}
}
out:
*sysdiv = best_sysdiv;
*pll_prediv = OV5640_PLL_PREDIV;
*pll_mult = best_mult;
return best;
}
/*
* ov5640_set_mipi_pclk() - Calculate the clock tree configuration values
* for the MIPI CSI-2 output.
*
* @rate: The requested bandwidth per lane in bytes per second.
* 'Bandwidth Per Lane' is calculated as:
* bpl = HTOT * VTOT * FPS * bpp / num_lanes;
*
* This function use the requested bandwidth to calculate:
* - sample_rate = bpl / (bpp / num_lanes);
* = bpl / (PLL_RDIV * BIT_DIV * PCLK_DIV * MIPI_DIV / num_lanes);
*
* - mipi_sclk = bpl / MIPI_DIV / 2; ( / 2 is for CSI-2 DDR)
*
* with these fixed parameters:
* PLL_RDIV = 2;
* BIT_DIVIDER = 2; (MIPI_BIT_MODE == 8 ? 2 : 2,5);
* PCLK_DIV = 1;
*
* The MIPI clock generation differs for modes that use the scaler and modes
* that do not. In case the scaler is in use, the MIPI_SCLK generates the MIPI
* BIT CLk, and thus:
*
* - mipi_sclk = bpl / MIPI_DIV / 2;
* MIPI_DIV = 1;
*
* For modes that do not go through the scaler, the MIPI BIT CLOCK is generated
* from the pixel clock, and thus:
*
* - sample_rate = bpl / (bpp / num_lanes);
* = bpl / (2 * 2 * 1 * MIPI_DIV / num_lanes);
* = bpl / (4 * MIPI_DIV / num_lanes);
* - MIPI_DIV = bpp / (4 * num_lanes);
*
* FIXME: this have been tested with 16bpp and 2 lanes setup only.
* MIPI_DIV is fixed to value 2, but it -might- be changed according to the
* above formula for setups with 1 lane or image formats with different bpp.
*
* FIXME: this deviates from the sensor manual documentation which is quite
* thin on the MIPI clock tree generation part.
*/
static int ov5640_set_mipi_pclk(struct ov5640_dev *sensor,
unsigned long rate)
{
const struct ov5640_mode_info *mode = sensor->current_mode;
u8 prediv, mult, sysdiv;
u8 mipi_div;
int ret;
/*
* 1280x720 is reported to use 'SUBSAMPLING' only,
* but according to the sensor manual it goes through the
* scaler before subsampling.
*/
if (mode->dn_mode == SCALING ||
(mode->id == OV5640_MODE_720P_1280_720))
mipi_div = OV5640_MIPI_DIV_SCLK;
else
mipi_div = OV5640_MIPI_DIV_PCLK;
ov5640_calc_sys_clk(sensor, rate, &prediv, &mult, &sysdiv);
ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL0,
0x0f, OV5640_PLL_CTRL0_MIPI_MODE_8BIT);
ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL1,
0xff, sysdiv << 4 | mipi_div);
if (ret)
return ret;
ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL2, 0xff, mult);
if (ret)
return ret;
ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL3,
0x1f, OV5640_PLL_CTRL3_PLL_ROOT_DIV_2 | prediv);
if (ret)
return ret;
return ov5640_mod_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER,
0x30, OV5640_PLL_SYS_ROOT_DIVIDER_BYPASS);
}
static unsigned long ov5640_calc_pclk(struct ov5640_dev *sensor,
unsigned long rate,
u8 *pll_prediv, u8 *pll_mult, u8 *sysdiv,
u8 *pll_rdiv, u8 *bit_div, u8 *pclk_div)
{
unsigned long _rate = rate * OV5640_PLL_ROOT_DIV * OV5640_BIT_DIV *
OV5640_PCLK_ROOT_DIV;
_rate = ov5640_calc_sys_clk(sensor, _rate, pll_prediv, pll_mult,
sysdiv);
*pll_rdiv = OV5640_PLL_ROOT_DIV;
*bit_div = OV5640_BIT_DIV;
*pclk_div = OV5640_PCLK_ROOT_DIV;
return _rate / *pll_rdiv / *bit_div / *pclk_div;
}
static int ov5640_set_dvp_pclk(struct ov5640_dev *sensor, unsigned long rate)
{
u8 prediv, mult, sysdiv, pll_rdiv, bit_div, pclk_div;
int ret;
ov5640_calc_pclk(sensor, rate, &prediv, &mult, &sysdiv, &pll_rdiv,
&bit_div, &pclk_div);
if (bit_div == 2)
bit_div = 8;
ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL0,
0x0f, bit_div);
if (ret)
return ret;
/*
* We need to set sysdiv according to the clock, and to clear
* the MIPI divider.
*/
ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL1,
0xff, sysdiv << 4);
if (ret)
return ret;
ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL2,
0xff, mult);
if (ret)
return ret;
ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL3,
0x1f, prediv | ((pll_rdiv - 1) << 4));
if (ret)
return ret;
return ov5640_mod_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER, 0x30,
(ilog2(pclk_div) << 4));
}
/* set JPEG framing sizes */
static int ov5640_set_jpeg_timings(struct ov5640_dev *sensor,
const struct ov5640_mode_info *mode)
{
int ret;
/*
* compression mode 3 timing
*
* Data is transmitted with programmable width (VFIFO_HSIZE).
* No padding done. Last line may have less data. Varying
* number of lines per frame, depending on amount of data.
*/
ret = ov5640_mod_reg(sensor, OV5640_REG_JPG_MODE_SELECT, 0x7, 0x3);
if (ret < 0)
return ret;
ret = ov5640_write_reg16(sensor, OV5640_REG_VFIFO_HSIZE, mode->hact);
if (ret < 0)
return ret;
return ov5640_write_reg16(sensor, OV5640_REG_VFIFO_VSIZE, mode->vact);
}
/* download ov5640 settings to sensor through i2c */
static int ov5640_set_timings(struct ov5640_dev *sensor,
const struct ov5640_mode_info *mode)
{
int ret;
if (sensor->fmt.code == MEDIA_BUS_FMT_JPEG_1X8) {
ret = ov5640_set_jpeg_timings(sensor, mode);
if (ret < 0)
return ret;
}
ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_DVPHO, mode->hact);
if (ret < 0)
return ret;
ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_DVPVO, mode->vact);
if (ret < 0)
return ret;
ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_HTS, mode->htot);
if (ret < 0)
return ret;
return ov5640_write_reg16(sensor, OV5640_REG_TIMING_VTS, mode->vtot);
}
static int ov5640_load_regs(struct ov5640_dev *sensor,
const struct ov5640_mode_info *mode)
{
const struct reg_value *regs = mode->reg_data;
unsigned int i;
u32 delay_ms;
u16 reg_addr;
u8 mask, val;
int ret = 0;
for (i = 0; i < mode->reg_data_size; ++i, ++regs) {
delay_ms = regs->delay_ms;
reg_addr = regs->reg_addr;
val = regs->val;
mask = regs->mask;
if (mask)
ret = ov5640_mod_reg(sensor, reg_addr, mask, val);
else
ret = ov5640_write_reg(sensor, reg_addr, val);
if (ret)
break;
if (delay_ms)
usleep_range(1000 * delay_ms, 1000 * delay_ms + 100);
}
return ov5640_set_timings(sensor, mode);
}
static int ov5640_set_autoexposure(struct ov5640_dev *sensor, bool on)
{
return ov5640_mod_reg(sensor, OV5640_REG_AEC_PK_MANUAL,
BIT(0), on ? 0 : BIT(0));
}
/* read exposure, in number of line periods */
static int ov5640_get_exposure(struct ov5640_dev *sensor)
{
int exp, ret;
u8 temp;
ret = ov5640_read_reg(sensor, OV5640_REG_AEC_PK_EXPOSURE_HI, &temp);
if (ret)
return ret;
exp = ((int)temp & 0x0f) << 16;
ret = ov5640_read_reg(sensor, OV5640_REG_AEC_PK_EXPOSURE_MED, &temp);
if (ret)
return ret;
exp |= ((int)temp << 8);
ret = ov5640_read_reg(sensor, OV5640_REG_AEC_PK_EXPOSURE_LO, &temp);
if (ret)
return ret;
exp |= (int)temp;
return exp >> 4;
}
/* write exposure, given number of line periods */
static int ov5640_set_exposure(struct ov5640_dev *sensor, u32 exposure)
{
int ret;
exposure <<= 4;
ret = ov5640_write_reg(sensor,
OV5640_REG_AEC_PK_EXPOSURE_LO,
exposure & 0xff);
if (ret)
return ret;
ret = ov5640_write_reg(sensor,
OV5640_REG_AEC_PK_EXPOSURE_MED,
(exposure >> 8) & 0xff);
if (ret)
return ret;
return ov5640_write_reg(sensor,
OV5640_REG_AEC_PK_EXPOSURE_HI,
(exposure >> 16) & 0x0f);
}
static int ov5640_get_gain(struct ov5640_dev *sensor)
{
u16 gain;
int ret;
ret = ov5640_read_reg16(sensor, OV5640_REG_AEC_PK_REAL_GAIN, &gain);
if (ret)
return ret;
return gain & 0x3ff;
}
static int ov5640_set_gain(struct ov5640_dev *sensor, int gain)
{
return ov5640_write_reg16(sensor, OV5640_REG_AEC_PK_REAL_GAIN,
(u16)gain & 0x3ff);
}
static int ov5640_set_autogain(struct ov5640_dev *sensor, bool on)
{
return ov5640_mod_reg(sensor, OV5640_REG_AEC_PK_MANUAL,
BIT(1), on ? 0 : BIT(1));
}
static int ov5640_set_stream_dvp(struct ov5640_dev *sensor, bool on)
{
int ret;
unsigned int flags = sensor->ep.bus.parallel.flags;
u8 pclk_pol = 0;
u8 hsync_pol = 0;
u8 vsync_pol = 0;
/*
* Note about parallel port configuration.
*
* When configured in parallel mode, the OV5640 will
* output 10 bits data on DVP data lines [9:0].
* If only 8 bits data are wanted, the 8 bits data lines
* of the camera interface must be physically connected
* on the DVP data lines [9:2].
*
* Control lines polarity can be configured through
* devicetree endpoint control lines properties.
* If no endpoint control lines properties are set,
* polarity will be as below:
* - VSYNC: active high
* - HREF: active low
* - PCLK: active low
*/
if (on) {
/*
* configure parallel port control lines polarity
*
* POLARITY CTRL0
* - [5]: PCLK polarity (0: active low, 1: active high)
* - [1]: HREF polarity (0: active low, 1: active high)
* - [0]: VSYNC polarity (mismatch here between
* datasheet and hardware, 0 is active high
* and 1 is active low...)
*/
if (flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
pclk_pol = 1;
if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
hsync_pol = 1;
if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
vsync_pol = 1;
ret = ov5640_write_reg(sensor,
OV5640_REG_POLARITY_CTRL00,
(pclk_pol << 5) |
(hsync_pol << 1) |
vsync_pol);
if (ret)
return ret;
}
/*
* powerdown MIPI TX/RX PHY & disable MIPI
*
* MIPI CONTROL 00
* 4: PWDN PHY TX
* 3: PWDN PHY RX
* 2: MIPI enable
*/
ret = ov5640_write_reg(sensor,
OV5640_REG_IO_MIPI_CTRL00, on ? 0x18 : 0);
if (ret)
return ret;
/*
* enable VSYNC/HREF/PCLK DVP control lines
* & D[9:6] DVP data lines
*
* PAD OUTPUT ENABLE 01
* - 6: VSYNC output enable
* - 5: HREF output enable
* - 4: PCLK output enable
* - [3:0]: D[9:6] output enable
*/
ret = ov5640_write_reg(sensor,
OV5640_REG_PAD_OUTPUT_ENABLE01,
on ? 0x7f : 0);
if (ret)
return ret;
/*
* enable D[5:0] DVP data lines
*
* PAD OUTPUT ENABLE 02
* - [7:2]: D[5:0] output enable
*/
return ov5640_write_reg(sensor,
OV5640_REG_PAD_OUTPUT_ENABLE02,
on ? 0xfc : 0);
}
static int ov5640_set_stream_mipi(struct ov5640_dev *sensor, bool on)
{
int ret;
/*
* Enable/disable the MIPI interface
*
* 0x300e = on ? 0x45 : 0x40
*
* FIXME: the sensor manual (version 2.03) reports
* [7:5] = 000 : 1 data lane mode
* [7:5] = 001 : 2 data lanes mode
* But this settings do not work, while the following ones
* have been validated for 2 data lanes mode.
*
* [7:5] = 010 : 2 data lanes mode
* [4] = 0 : Power up MIPI HS Tx
* [3] = 0 : Power up MIPI LS Rx
* [2] = 1/0 : MIPI interface enable/disable
* [1:0] = 01/00: FIXME: 'debug'
*/
ret = ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00,
on ? 0x45 : 0x40);
if (ret)
return ret;
return ov5640_write_reg(sensor, OV5640_REG_FRAME_CTRL01,
on ? 0x00 : 0x0f);
}
static int ov5640_get_sysclk(struct ov5640_dev *sensor)
{
/* calculate sysclk */
u32 xvclk = sensor->xclk_freq / 10000;
u32 multiplier, prediv, VCO, sysdiv, pll_rdiv;
u32 sclk_rdiv_map[] = {1, 2, 4, 8};
u32 bit_div2x = 1, sclk_rdiv, sysclk;
u8 temp1, temp2;
int ret;
ret = ov5640_read_reg(sensor, OV5640_REG_SC_PLL_CTRL0, &temp1);
if (ret)
return ret;
temp2 = temp1 & 0x0f;
if (temp2 == 8 || temp2 == 10)
bit_div2x = temp2 / 2;
ret = ov5640_read_reg(sensor, OV5640_REG_SC_PLL_CTRL1, &temp1);
if (ret)
return ret;
sysdiv = temp1 >> 4;
if (sysdiv == 0)
sysdiv = 16;
ret = ov5640_read_reg(sensor, OV5640_REG_SC_PLL_CTRL2, &temp1);
if (ret)
return ret;
multiplier = temp1;
ret = ov5640_read_reg(sensor, OV5640_REG_SC_PLL_CTRL3, &temp1);
if (ret)
return ret;
prediv = temp1 & 0x0f;
pll_rdiv = ((temp1 >> 4) & 0x01) + 1;
ret = ov5640_read_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER, &temp1);
if (ret)
return ret;
temp2 = temp1 & 0x03;
sclk_rdiv = sclk_rdiv_map[temp2];
if (!prediv || !sysdiv || !pll_rdiv || !bit_div2x)
return -EINVAL;
VCO = xvclk * multiplier / prediv;
sysclk = VCO / sysdiv / pll_rdiv * 2 / bit_div2x / sclk_rdiv;
return sysclk;
}
static int ov5640_set_night_mode(struct ov5640_dev *sensor)
{
/* read HTS from register settings */
u8 mode;
int ret;
ret = ov5640_read_reg(sensor, OV5640_REG_AEC_CTRL00, &mode);
if (ret)
return ret;
mode &= 0xfb;
return ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL00, mode);
}
static int ov5640_get_hts(struct ov5640_dev *sensor)
{
/* read HTS from register settings */
u16 hts;
int ret;
ret = ov5640_read_reg16(sensor, OV5640_REG_TIMING_HTS, &hts);
if (ret)
return ret;
return hts;
}
static int ov5640_get_vts(struct ov5640_dev *sensor)
{
u16 vts;
int ret;
ret = ov5640_read_reg16(sensor, OV5640_REG_TIMING_VTS, &vts);
if (ret)
return ret;
return vts;
}
static int ov5640_set_vts(struct ov5640_dev *sensor, int vts)
{
return ov5640_write_reg16(sensor, OV5640_REG_TIMING_VTS, vts);
}
static int ov5640_get_light_freq(struct ov5640_dev *sensor)
{
/* get banding filter value */
int ret, light_freq = 0;
u8 temp, temp1;
ret = ov5640_read_reg(sensor, OV5640_REG_HZ5060_CTRL01, &temp);
if (ret)
return ret;
if (temp & 0x80) {
/* manual */
ret = ov5640_read_reg(sensor, OV5640_REG_HZ5060_CTRL00,
&temp1);
if (ret)
return ret;
if (temp1 & 0x04) {
/* 50Hz */
light_freq = 50;
} else {
/* 60Hz */
light_freq = 60;
}
} else {
/* auto */
ret = ov5640_read_reg(sensor, OV5640_REG_SIGMADELTA_CTRL0C,
&temp1);
if (ret)
return ret;
if (temp1 & 0x01) {
/* 50Hz */
light_freq = 50;
} else {
/* 60Hz */
}
}
return light_freq;
}
static int ov5640_set_bandingfilter(struct ov5640_dev *sensor)
{
u32 band_step60, max_band60, band_step50, max_band50, prev_vts;
int ret;
/* read preview PCLK */
ret = ov5640_get_sysclk(sensor);
if (ret < 0)
return ret;
if (ret == 0)
return -EINVAL;
sensor->prev_sysclk = ret;
/* read preview HTS */
ret = ov5640_get_hts(sensor);
if (ret < 0)
return ret;
if (ret == 0)
return -EINVAL;
sensor->prev_hts = ret;
/* read preview VTS */
ret = ov5640_get_vts(sensor);
if (ret < 0)
return ret;
prev_vts = ret;
/* calculate banding filter */
/* 60Hz */
band_step60 = sensor->prev_sysclk * 100 / sensor->prev_hts * 100 / 120;
ret = ov5640_write_reg16(sensor, OV5640_REG_AEC_B60_STEP, band_step60);
if (ret)
return ret;
if (!band_step60)
return -EINVAL;
max_band60 = (int)((prev_vts - 4) / band_step60);
ret = ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL0D, max_band60);
if (ret)
return ret;
/* 50Hz */
band_step50 = sensor->prev_sysclk * 100 / sensor->prev_hts;
ret = ov5640_write_reg16(sensor, OV5640_REG_AEC_B50_STEP, band_step50);
if (ret)
return ret;
if (!band_step50)
return -EINVAL;
max_band50 = (int)((prev_vts - 4) / band_step50);
return ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL0E, max_band50);
}
static int ov5640_set_ae_target(struct ov5640_dev *sensor, int target)
{
/* stable in high */
u32 fast_high, fast_low;
int ret;
sensor->ae_low = target * 23 / 25; /* 0.92 */
sensor->ae_high = target * 27 / 25; /* 1.08 */
fast_high = sensor->ae_high << 1;
if (fast_high > 255)
fast_high = 255;
fast_low = sensor->ae_low >> 1;
ret = ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL0F, sensor->ae_high);
if (ret)
return ret;
ret = ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL10, sensor->ae_low);
if (ret)
return ret;
ret = ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL1B, sensor->ae_high);
if (ret)
return ret;
ret = ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL1E, sensor->ae_low);
if (ret)
return ret;
ret = ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL11, fast_high);
if (ret)
return ret;
return ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL1F, fast_low);
}
static int ov5640_get_binning(struct ov5640_dev *sensor)
{
u8 temp;
int ret;
ret = ov5640_read_reg(sensor, OV5640_REG_TIMING_TC_REG21, &temp);
if (ret)
return ret;
return temp & BIT(0);
}
static int ov5640_set_binning(struct ov5640_dev *sensor, bool enable)
{
int ret;
/*
* TIMING TC REG21:
* - [0]: Horizontal binning enable
*/
ret = ov5640_mod_reg(sensor, OV5640_REG_TIMING_TC_REG21,
BIT(0), enable ? BIT(0) : 0);
if (ret)
return ret;
/*
* TIMING TC REG20:
* - [0]: Undocumented, but hardcoded init sequences
* are always setting REG21/REG20 bit 0 to same value...
*/
return ov5640_mod_reg(sensor, OV5640_REG_TIMING_TC_REG20,
BIT(0), enable ? BIT(0) : 0);
}
static int ov5640_set_virtual_channel(struct ov5640_dev *sensor)
{
struct i2c_client *client = sensor->i2c_client;
u8 temp, channel = virtual_channel;
int ret;
if (channel > 3) {
dev_err(&client->dev,
"%s: wrong virtual_channel parameter, expected (0..3), got %d\n",
__func__, channel);
return -EINVAL;
}
ret = ov5640_read_reg(sensor, OV5640_REG_DEBUG_MODE, &temp);
if (ret)
return ret;
temp &= ~(3 << 6);
temp |= (channel << 6);
return ov5640_write_reg(sensor, OV5640_REG_DEBUG_MODE, temp);
}
static const struct ov5640_mode_info *
ov5640_find_mode(struct ov5640_dev *sensor, enum ov5640_frame_rate fr,
int width, int height, bool nearest)
{
const struct ov5640_mode_info *mode;
mode = v4l2_find_nearest_size(ov5640_mode_data,
ARRAY_SIZE(ov5640_mode_data),
hact, vact,
width, height);
if (!mode ||
(!nearest && (mode->hact != width || mode->vact != height)))
return NULL;
/* Only 640x480 can operate at 60fps (for now) */
if (fr == OV5640_60_FPS &&
!(mode->hact == 640 && mode->vact == 480))
return NULL;
/* 2592x1944 only works at 15fps max */
if ((mode->hact == 2592 && mode->vact == 1944) &&
fr > OV5640_15_FPS)
return NULL;
return mode;
}
static u64 ov5640_calc_pixel_rate(struct ov5640_dev *sensor)
{
u64 rate;
rate = sensor->current_mode->vtot * sensor->current_mode->htot;
rate *= ov5640_framerates[sensor->current_fr];
return rate;
}
/*
* sensor changes between scaling and subsampling, go through
* exposure calculation
*/
static int ov5640_set_mode_exposure_calc(struct ov5640_dev *sensor,
const struct ov5640_mode_info *mode)
{
u32 prev_shutter, prev_gain16;
u32 cap_shutter, cap_gain16;
u32 cap_sysclk, cap_hts, cap_vts;
u32 light_freq, cap_bandfilt, cap_maxband;
u32 cap_gain16_shutter;
u8 average;
int ret;
if (!mode->reg_data)
return -EINVAL;
/* read preview shutter */
ret = ov5640_get_exposure(sensor);
if (ret < 0)
return ret;
prev_shutter = ret;
ret = ov5640_get_binning(sensor);
if (ret < 0)
return ret;
if (ret && mode->id != OV5640_MODE_720P_1280_720 &&
mode->id != OV5640_MODE_1080P_1920_1080)
prev_shutter *= 2;
/* read preview gain */
ret = ov5640_get_gain(sensor);
if (ret < 0)
return ret;
prev_gain16 = ret;
/* get average */
ret = ov5640_read_reg(sensor, OV5640_REG_AVG_READOUT, &average);
if (ret)
return ret;
/* turn off night mode for capture */
ret = ov5640_set_night_mode(sensor);
if (ret < 0)
return ret;
/* Write capture setting */
ret = ov5640_load_regs(sensor, mode);
if (ret < 0)
return ret;
/* read capture VTS */
ret = ov5640_get_vts(sensor);
if (ret < 0)
return ret;
cap_vts = ret;
ret = ov5640_get_hts(sensor);
if (ret < 0)
return ret;
if (ret == 0)
return -EINVAL;
cap_hts = ret;
ret = ov5640_get_sysclk(sensor);
if (ret < 0)
return ret;
if (ret == 0)
return -EINVAL;
cap_sysclk = ret;
/* calculate capture banding filter */
ret = ov5640_get_light_freq(sensor);
if (ret < 0)
return ret;
light_freq = ret;
if (light_freq == 60) {
/* 60Hz */
cap_bandfilt = cap_sysclk * 100 / cap_hts * 100 / 120;
} else {
/* 50Hz */
cap_bandfilt = cap_sysclk * 100 / cap_hts;
}
if (!sensor->prev_sysclk) {
ret = ov5640_get_sysclk(sensor);
if (ret < 0)
return ret;
if (ret == 0)
return -EINVAL;
sensor->prev_sysclk = ret;
}
if (!cap_bandfilt)
return -EINVAL;
cap_maxband = (int)((cap_vts - 4) / cap_bandfilt);
/* calculate capture shutter/gain16 */
if (average > sensor->ae_low && average < sensor->ae_high) {
/* in stable range */
cap_gain16_shutter =
prev_gain16 * prev_shutter *
cap_sysclk / sensor->prev_sysclk *
sensor->prev_hts / cap_hts *
sensor->ae_target / average;
} else {
cap_gain16_shutter =
prev_gain16 * prev_shutter *
cap_sysclk / sensor->prev_sysclk *
sensor->prev_hts / cap_hts;
}
/* gain to shutter */
if (cap_gain16_shutter < (cap_bandfilt * 16)) {
/* shutter < 1/100 */
cap_shutter = cap_gain16_shutter / 16;
if (cap_shutter < 1)
cap_shutter = 1;
cap_gain16 = cap_gain16_shutter / cap_shutter;
if (cap_gain16 < 16)
cap_gain16 = 16;
} else {
if (cap_gain16_shutter > (cap_bandfilt * cap_maxband * 16)) {
/* exposure reach max */
cap_shutter = cap_bandfilt * cap_maxband;
if (!cap_shutter)
return -EINVAL;
cap_gain16 = cap_gain16_shutter / cap_shutter;
} else {
/* 1/100 < (cap_shutter = n/100) =< max */
cap_shutter =
((int)(cap_gain16_shutter / 16 / cap_bandfilt))
* cap_bandfilt;
if (!cap_shutter)
return -EINVAL;
cap_gain16 = cap_gain16_shutter / cap_shutter;
}
}
/* set capture gain */
ret = ov5640_set_gain(sensor, cap_gain16);
if (ret)
return ret;
/* write capture shutter */
if (cap_shutter > (cap_vts - 4)) {
cap_vts = cap_shutter + 4;
ret = ov5640_set_vts(sensor, cap_vts);
if (ret < 0)
return ret;
}
/* set exposure */
return ov5640_set_exposure(sensor, cap_shutter);
}
/*
* if sensor changes inside scaling or subsampling
* change mode directly
*/
static int ov5640_set_mode_direct(struct ov5640_dev *sensor,
const struct ov5640_mode_info *mode)
{
if (!mode->reg_data)
return -EINVAL;
/* Write capture setting */
return ov5640_load_regs(sensor, mode);
}
static int ov5640_set_mode(struct ov5640_dev *sensor)
{
const struct ov5640_mode_info *mode = sensor->current_mode;
const struct ov5640_mode_info *orig_mode = sensor->last_mode;
enum ov5640_downsize_mode dn_mode, orig_dn_mode;
bool auto_gain = sensor->ctrls.auto_gain->val == 1;
bool auto_exp = sensor->ctrls.auto_exp->val == V4L2_EXPOSURE_AUTO;
unsigned long rate;
int ret;
dn_mode = mode->dn_mode;
orig_dn_mode = orig_mode->dn_mode;
/* auto gain and exposure must be turned off when changing modes */
if (auto_gain) {
ret = ov5640_set_autogain(sensor, false);
if (ret)
return ret;
}
if (auto_exp) {
ret = ov5640_set_autoexposure(sensor, false);
if (ret)
goto restore_auto_gain;
}
/*
* All the formats we support have 16 bits per pixel, seems to require
* the same rate than YUV, so we can just use 16 bpp all the time.
*/
rate = ov5640_calc_pixel_rate(sensor) * 16;
if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY) {
rate = rate / sensor->ep.bus.mipi_csi2.num_data_lanes;
ret = ov5640_set_mipi_pclk(sensor, rate);
} else {
rate = rate / sensor->ep.bus.parallel.bus_width;
ret = ov5640_set_dvp_pclk(sensor, rate);
}
if (ret < 0)
return 0;
if ((dn_mode == SUBSAMPLING && orig_dn_mode == SCALING) ||
(dn_mode == SCALING && orig_dn_mode == SUBSAMPLING)) {
/*
* change between subsampling and scaling
* go through exposure calculation
*/
ret = ov5640_set_mode_exposure_calc(sensor, mode);
} else {
/*
* change inside subsampling or scaling
* download firmware directly
*/
ret = ov5640_set_mode_direct(sensor, mode);
}
if (ret < 0)
goto restore_auto_exp_gain;
/* restore auto gain and exposure */
if (auto_gain)
ov5640_set_autogain(sensor, true);
if (auto_exp)
ov5640_set_autoexposure(sensor, true);
ret = ov5640_set_binning(sensor, dn_mode != SCALING);
if (ret < 0)
return ret;
ret = ov5640_set_ae_target(sensor, sensor->ae_target);
if (ret < 0)
return ret;
ret = ov5640_get_light_freq(sensor);
if (ret < 0)
return ret;
ret = ov5640_set_bandingfilter(sensor);
if (ret < 0)
return ret;
ret = ov5640_set_virtual_channel(sensor);
if (ret < 0)
return ret;
sensor->pending_mode_change = false;
sensor->last_mode = mode;
return 0;
restore_auto_exp_gain:
if (auto_exp)
ov5640_set_autoexposure(sensor, true);
restore_auto_gain:
if (auto_gain)
ov5640_set_autogain(sensor, true);
return ret;
}
static int ov5640_set_framefmt(struct ov5640_dev *sensor,
struct v4l2_mbus_framefmt *format);
/* restore the last set video mode after chip power-on */
static int ov5640_restore_mode(struct ov5640_dev *sensor)
{
int ret;
/* first load the initial register values */
ret = ov5640_load_regs(sensor, &ov5640_mode_init_data);
if (ret < 0)
return ret;
sensor->last_mode = &ov5640_mode_init_data;
ret = ov5640_mod_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER, 0x3f,
(ilog2(OV5640_SCLK2X_ROOT_DIV) << 2) |
ilog2(OV5640_SCLK_ROOT_DIV));
if (ret)
return ret;
/* now restore the last capture mode */
ret = ov5640_set_mode(sensor);
if (ret < 0)
return ret;
return ov5640_set_framefmt(sensor, &sensor->fmt);
}
static void ov5640_power(struct ov5640_dev *sensor, bool enable)
{
gpiod_set_value_cansleep(sensor->pwdn_gpio, enable ? 0 : 1);
}
static void ov5640_reset(struct ov5640_dev *sensor)
{
if (!sensor->reset_gpio)
return;
gpiod_set_value_cansleep(sensor->reset_gpio, 0);
/* camera power cycle */
ov5640_power(sensor, false);
usleep_range(5000, 10000);
ov5640_power(sensor, true);
usleep_range(5000, 10000);
gpiod_set_value_cansleep(sensor->reset_gpio, 1);
usleep_range(1000, 2000);
gpiod_set_value_cansleep(sensor->reset_gpio, 0);
usleep_range(20000, 25000);
}
static int ov5640_set_power_on(struct ov5640_dev *sensor)
{
struct i2c_client *client = sensor->i2c_client;
int ret;
ret = clk_prepare_enable(sensor->xclk);
if (ret) {
dev_err(&client->dev, "%s: failed to enable clock\n",
__func__);
return ret;
}
ret = regulator_bulk_enable(OV5640_NUM_SUPPLIES,
sensor->supplies);
if (ret) {
dev_err(&client->dev, "%s: failed to enable regulators\n",
__func__);
goto xclk_off;
}
ov5640_reset(sensor);
ov5640_power(sensor, true);
ret = ov5640_init_slave_id(sensor);
if (ret)
goto power_off;
return 0;
power_off:
ov5640_power(sensor, false);
regulator_bulk_disable(OV5640_NUM_SUPPLIES, sensor->supplies);
xclk_off:
clk_disable_unprepare(sensor->xclk);
return ret;
}
static void ov5640_set_power_off(struct ov5640_dev *sensor)
{
ov5640_power(sensor, false);
regulator_bulk_disable(OV5640_NUM_SUPPLIES, sensor->supplies);
clk_disable_unprepare(sensor->xclk);
}
static int ov5640_set_power(struct ov5640_dev *sensor, bool on)
{
int ret = 0;
if (on) {
ret = ov5640_set_power_on(sensor);
if (ret)
return ret;
ret = ov5640_restore_mode(sensor);
if (ret)
goto power_off;
/* We're done here for DVP bus, while CSI-2 needs setup. */
if (sensor->ep.bus_type != V4L2_MBUS_CSI2_DPHY)
return 0;
/*
* Power up MIPI HS Tx and LS Rx; 2 data lanes mode
*
* 0x300e = 0x40
* [7:5] = 010 : 2 data lanes mode (see FIXME note in
* "ov5640_set_stream_mipi()")
* [4] = 0 : Power up MIPI HS Tx
* [3] = 0 : Power up MIPI LS Rx
* [2] = 0 : MIPI interface disabled
*/
ret = ov5640_write_reg(sensor,
OV5640_REG_IO_MIPI_CTRL00, 0x40);
if (ret)
goto power_off;
/*
* Gate clock and set LP11 in 'no packets mode' (idle)
*
* 0x4800 = 0x24
* [5] = 1 : Gate clock when 'no packets'
* [2] = 1 : MIPI bus in LP11 when 'no packets'
*/
ret = ov5640_write_reg(sensor,
OV5640_REG_MIPI_CTRL00, 0x24);
if (ret)
goto power_off;
/*
* Set data lanes and clock in LP11 when 'sleeping'
*
* 0x3019 = 0x70
* [6] = 1 : MIPI data lane 2 in LP11 when 'sleeping'
* [5] = 1 : MIPI data lane 1 in LP11 when 'sleeping'
* [4] = 1 : MIPI clock lane in LP11 when 'sleeping'
*/
ret = ov5640_write_reg(sensor,
OV5640_REG_PAD_OUTPUT00, 0x70);
if (ret)
goto power_off;
/* Give lanes some time to coax into LP11 state. */
usleep_range(500, 1000);
} else {
if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY) {
/* Reset MIPI bus settings to their default values. */
ov5640_write_reg(sensor,
OV5640_REG_IO_MIPI_CTRL00, 0x58);
ov5640_write_reg(sensor,
OV5640_REG_MIPI_CTRL00, 0x04);
ov5640_write_reg(sensor,
OV5640_REG_PAD_OUTPUT00, 0x00);
}
ov5640_set_power_off(sensor);
}
return 0;
power_off:
ov5640_set_power_off(sensor);
return ret;
}
/* --------------- Subdev Operations --------------- */
static int ov5640_s_power(struct v4l2_subdev *sd, int on)
{
struct ov5640_dev *sensor = to_ov5640_dev(sd);
int ret = 0;
mutex_lock(&sensor->lock);
/*
* If the power count is modified from 0 to != 0 or from != 0 to 0,
* update the power state.
*/
if (sensor->power_count == !on) {
ret = ov5640_set_power(sensor, !!on);
if (ret)
goto out;
}
/* Update the power count. */
sensor->power_count += on ? 1 : -1;
WARN_ON(sensor->power_count < 0);
out:
mutex_unlock(&sensor->lock);
if (on && !ret && sensor->power_count == 1) {
/* restore controls */
ret = v4l2_ctrl_handler_setup(&sensor->ctrls.handler);
}
return ret;
}
static int ov5640_try_frame_interval(struct ov5640_dev *sensor,
struct v4l2_fract *fi,
u32 width, u32 height)
{
const struct ov5640_mode_info *mode;
enum ov5640_frame_rate rate = OV5640_15_FPS;
int minfps, maxfps, best_fps, fps;
int i;
minfps = ov5640_framerates[OV5640_15_FPS];
maxfps = ov5640_framerates[OV5640_60_FPS];
if (fi->numerator == 0) {
fi->denominator = maxfps;
fi->numerator = 1;
rate = OV5640_60_FPS;
goto find_mode;
}
fps = clamp_val(DIV_ROUND_CLOSEST(fi->denominator, fi->numerator),
minfps, maxfps);
best_fps = minfps;
for (i = 0; i < ARRAY_SIZE(ov5640_framerates); i++) {
int curr_fps = ov5640_framerates[i];
if (abs(curr_fps - fps) < abs(best_fps - fps)) {
best_fps = curr_fps;
rate = i;
}
}
fi->numerator = 1;
fi->denominator = best_fps;
find_mode:
mode = ov5640_find_mode(sensor, rate, width, height, false);
return mode ? rate : -EINVAL;
}
static int ov5640_get_fmt(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *format)
{
struct ov5640_dev *sensor = to_ov5640_dev(sd);
struct v4l2_mbus_framefmt *fmt;
if (format->pad != 0)
return -EINVAL;
mutex_lock(&sensor->lock);
if (format->which == V4L2_SUBDEV_FORMAT_TRY)
fmt = v4l2_subdev_get_try_format(&sensor->sd, cfg,
format->pad);
else
fmt = &sensor->fmt;
format->format = *fmt;
mutex_unlock(&sensor->lock);
return 0;
}
static int ov5640_try_fmt_internal(struct v4l2_subdev *sd,
struct v4l2_mbus_framefmt *fmt,
enum ov5640_frame_rate fr,
const struct ov5640_mode_info **new_mode)
{
struct ov5640_dev *sensor = to_ov5640_dev(sd);
const struct ov5640_mode_info *mode;
int i;
mode = ov5640_find_mode(sensor, fr, fmt->width, fmt->height, true);
if (!mode)
return -EINVAL;
fmt->width = mode->hact;
fmt->height = mode->vact;
if (new_mode)
*new_mode = mode;
for (i = 0; i < ARRAY_SIZE(ov5640_formats); i++)
if (ov5640_formats[i].code == fmt->code)
break;
if (i >= ARRAY_SIZE(ov5640_formats))
i = 0;
fmt->code = ov5640_formats[i].code;
fmt->colorspace = ov5640_formats[i].colorspace;
fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace);
fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE;
fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt->colorspace);
return 0;
}
static int ov5640_set_fmt(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *format)
{
struct ov5640_dev *sensor = to_ov5640_dev(sd);
const struct ov5640_mode_info *new_mode;
struct v4l2_mbus_framefmt *mbus_fmt = &format->format;
struct v4l2_mbus_framefmt *fmt;
int ret;
if (format->pad != 0)
return -EINVAL;
mutex_lock(&sensor->lock);
if (sensor->streaming) {
ret = -EBUSY;
goto out;
}
ret = ov5640_try_fmt_internal(sd, mbus_fmt,
sensor->current_fr, &new_mode);
if (ret)
goto out;
if (format->which == V4L2_SUBDEV_FORMAT_TRY)
fmt = v4l2_subdev_get_try_format(sd, cfg, 0);
else
fmt = &sensor->fmt;
*fmt = *mbus_fmt;
if (new_mode != sensor->current_mode) {
sensor->current_mode = new_mode;
sensor->pending_mode_change = true;
}
if (mbus_fmt->code != sensor->fmt.code)
sensor->pending_fmt_change = true;
__v4l2_ctrl_s_ctrl_int64(sensor->ctrls.pixel_rate,
ov5640_calc_pixel_rate(sensor));
out:
mutex_unlock(&sensor->lock);
return ret;
}
static int ov5640_set_framefmt(struct ov5640_dev *sensor,
struct v4l2_mbus_framefmt *format)
{
int ret = 0;
bool is_jpeg = false;
u8 fmt, mux;
switch (format->code) {
case MEDIA_BUS_FMT_UYVY8_2X8:
/* YUV422, UYVY */
fmt = 0x3f;
mux = OV5640_FMT_MUX_YUV422;
break;
case MEDIA_BUS_FMT_YUYV8_2X8:
/* YUV422, YUYV */
fmt = 0x30;
mux = OV5640_FMT_MUX_YUV422;
break;
case MEDIA_BUS_FMT_RGB565_2X8_LE:
/* RGB565 {g[2:0],b[4:0]},{r[4:0],g[5:3]} */
fmt = 0x6F;
mux = OV5640_FMT_MUX_RGB;
break;
case MEDIA_BUS_FMT_RGB565_2X8_BE:
/* RGB565 {r[4:0],g[5:3]},{g[2:0],b[4:0]} */
fmt = 0x61;
mux = OV5640_FMT_MUX_RGB;
break;
case MEDIA_BUS_FMT_JPEG_1X8:
/* YUV422, YUYV */
fmt = 0x30;
mux = OV5640_FMT_MUX_YUV422;
is_jpeg = true;
break;
case MEDIA_BUS_FMT_SBGGR8_1X8:
/* Raw, BGBG... / GRGR... */
fmt = 0x00;
mux = OV5640_FMT_MUX_RAW_DPC;
break;
case MEDIA_BUS_FMT_SGBRG8_1X8:
/* Raw bayer, GBGB... / RGRG... */
fmt = 0x01;
mux = OV5640_FMT_MUX_RAW_DPC;
break;
case MEDIA_BUS_FMT_SGRBG8_1X8:
/* Raw bayer, GRGR... / BGBG... */
fmt = 0x02;
mux = OV5640_FMT_MUX_RAW_DPC;
break;
case MEDIA_BUS_FMT_SRGGB8_1X8:
/* Raw bayer, RGRG... / GBGB... */
fmt = 0x03;
mux = OV5640_FMT_MUX_RAW_DPC;
break;
default:
return -EINVAL;
}
/* FORMAT CONTROL00: YUV and RGB formatting */
ret = ov5640_write_reg(sensor, OV5640_REG_FORMAT_CONTROL00, fmt);
if (ret)
return ret;
/* FORMAT MUX CONTROL: ISP YUV or RGB */
ret = ov5640_write_reg(sensor, OV5640_REG_ISP_FORMAT_MUX_CTRL, mux);
if (ret)
return ret;
/*
* TIMING TC REG21:
* - [5]: JPEG enable
*/
ret = ov5640_mod_reg(sensor, OV5640_REG_TIMING_TC_REG21,
BIT(5), is_jpeg ? BIT(5) : 0);
if (ret)
return ret;
/*
* SYSTEM RESET02:
* - [4]: Reset JFIFO
* - [3]: Reset SFIFO
* - [2]: Reset JPEG
*/
ret = ov5640_mod_reg(sensor, OV5640_REG_SYS_RESET02,
BIT(4) | BIT(3) | BIT(2),
is_jpeg ? 0 : (BIT(4) | BIT(3) | BIT(2)));
if (ret)
return ret;
/*
* CLOCK ENABLE02:
* - [5]: Enable JPEG 2x clock
* - [3]: Enable JPEG clock
*/
return ov5640_mod_reg(sensor, OV5640_REG_SYS_CLOCK_ENABLE02,
BIT(5) | BIT(3),
is_jpeg ? (BIT(5) | BIT(3)) : 0);
}
/*
* Sensor Controls.
*/
static int ov5640_set_ctrl_hue(struct ov5640_dev *sensor, int value)
{
int ret;
if (value) {
ret = ov5640_mod_reg(sensor, OV5640_REG_SDE_CTRL0,
BIT(0), BIT(0));
if (ret)
return ret;
ret = ov5640_write_reg16(sensor, OV5640_REG_SDE_CTRL1, value);
} else {
ret = ov5640_mod_reg(sensor, OV5640_REG_SDE_CTRL0, BIT(0), 0);
}
return ret;
}
static int ov5640_set_ctrl_contrast(struct ov5640_dev *sensor, int value)
{
int ret;
if (value) {
ret = ov5640_mod_reg(sensor, OV5640_REG_SDE_CTRL0,
BIT(2), BIT(2));
if (ret)
return ret;
ret = ov5640_write_reg(sensor, OV5640_REG_SDE_CTRL5,
value & 0xff);
} else {
ret = ov5640_mod_reg(sensor, OV5640_REG_SDE_CTRL0, BIT(2), 0);
}
return ret;
}
static int ov5640_set_ctrl_saturation(struct ov5640_dev *sensor, int value)
{
int ret;
if (value) {
ret = ov5640_mod_reg(sensor, OV5640_REG_SDE_CTRL0,
BIT(1), BIT(1));
if (ret)
return ret;
ret = ov5640_write_reg(sensor, OV5640_REG_SDE_CTRL3,
value & 0xff);
if (ret)
return ret;
ret = ov5640_write_reg(sensor, OV5640_REG_SDE_CTRL4,
value & 0xff);
} else {
ret = ov5640_mod_reg(sensor, OV5640_REG_SDE_CTRL0, BIT(1), 0);
}
return ret;
}
static int ov5640_set_ctrl_white_balance(struct ov5640_dev *sensor, int awb)
{
int ret;
ret = ov5640_mod_reg(sensor, OV5640_REG_AWB_MANUAL_CTRL,
BIT(0), awb ? 0 : 1);
if (ret)
return ret;
if (!awb) {
u16 red = (u16)sensor->ctrls.red_balance->val;
u16 blue = (u16)sensor->ctrls.blue_balance->val;
ret = ov5640_write_reg16(sensor, OV5640_REG_AWB_R_GAIN, red);
if (ret)
return ret;
ret = ov5640_write_reg16(sensor, OV5640_REG_AWB_B_GAIN, blue);
}
return ret;
}
static int ov5640_set_ctrl_exposure(struct ov5640_dev *sensor,
enum v4l2_exposure_auto_type auto_exposure)
{
struct ov5640_ctrls *ctrls = &sensor->ctrls;
bool auto_exp = (auto_exposure == V4L2_EXPOSURE_AUTO);
int ret = 0;
if (ctrls->auto_exp->is_new) {
ret = ov5640_set_autoexposure(sensor, auto_exp);
if (ret)
return ret;
}
if (!auto_exp && ctrls->exposure->is_new) {
u16 max_exp;
ret = ov5640_read_reg16(sensor, OV5640_REG_AEC_PK_VTS,
&max_exp);
if (ret)
return ret;
ret = ov5640_get_vts(sensor);
if (ret < 0)
return ret;
max_exp += ret;
ret = 0;
if (ctrls->exposure->val < max_exp)
ret = ov5640_set_exposure(sensor, ctrls->exposure->val);
}
return ret;
}
static int ov5640_set_ctrl_gain(struct ov5640_dev *sensor, bool auto_gain)
{
struct ov5640_ctrls *ctrls = &sensor->ctrls;
int ret = 0;
if (ctrls->auto_gain->is_new) {
ret = ov5640_set_autogain(sensor, auto_gain);
if (ret)
return ret;
}
if (!auto_gain && ctrls->gain->is_new)
ret = ov5640_set_gain(sensor, ctrls->gain->val);
return ret;
}
static const char * const test_pattern_menu[] = {
"Disabled",
"Color bars",
"Color bars w/ rolling bar",
"Color squares",
"Color squares w/ rolling bar",
};
#define OV5640_TEST_ENABLE BIT(7)
#define OV5640_TEST_ROLLING BIT(6) /* rolling horizontal bar */
#define OV5640_TEST_TRANSPARENT BIT(5)
#define OV5640_TEST_SQUARE_BW BIT(4) /* black & white squares */
#define OV5640_TEST_BAR_STANDARD (0 << 2)
#define OV5640_TEST_BAR_VERT_CHANGE_1 (1 << 2)
#define OV5640_TEST_BAR_HOR_CHANGE (2 << 2)
#define OV5640_TEST_BAR_VERT_CHANGE_2 (3 << 2)
#define OV5640_TEST_BAR (0 << 0)
#define OV5640_TEST_RANDOM (1 << 0)
#define OV5640_TEST_SQUARE (2 << 0)
#define OV5640_TEST_BLACK (3 << 0)
static const u8 test_pattern_val[] = {
0,
OV5640_TEST_ENABLE | OV5640_TEST_BAR_VERT_CHANGE_1 |
OV5640_TEST_BAR,
OV5640_TEST_ENABLE | OV5640_TEST_ROLLING |
OV5640_TEST_BAR_VERT_CHANGE_1 | OV5640_TEST_BAR,
OV5640_TEST_ENABLE | OV5640_TEST_SQUARE,
OV5640_TEST_ENABLE | OV5640_TEST_ROLLING | OV5640_TEST_SQUARE,
};
static int ov5640_set_ctrl_test_pattern(struct ov5640_dev *sensor, int value)
{
return ov5640_write_reg(sensor, OV5640_REG_PRE_ISP_TEST_SET1,
test_pattern_val[value]);
}
static int ov5640_set_ctrl_light_freq(struct ov5640_dev *sensor, int value)
{
int ret;
ret = ov5640_mod_reg(sensor, OV5640_REG_HZ5060_CTRL01, BIT(7),
(value == V4L2_CID_POWER_LINE_FREQUENCY_AUTO) ?
0 : BIT(7));
if (ret)
return ret;
return ov5640_mod_reg(sensor, OV5640_REG_HZ5060_CTRL00, BIT(2),
(value == V4L2_CID_POWER_LINE_FREQUENCY_50HZ) ?
BIT(2) : 0);
}
static int ov5640_set_ctrl_hflip(struct ov5640_dev *sensor, int value)
{
/*
* If sensor is mounted upside down, mirror logic is inversed.
*
* Sensor is a BSI (Back Side Illuminated) one,
* so image captured is physically mirrored.
* This is why mirror logic is inversed in
* order to cancel this mirror effect.
*/
/*
* TIMING TC REG21:
* - [2]: ISP mirror
* - [1]: Sensor mirror
*/
return ov5640_mod_reg(sensor, OV5640_REG_TIMING_TC_REG21,
BIT(2) | BIT(1),
(!(value ^ sensor->upside_down)) ?
(BIT(2) | BIT(1)) : 0);
}
static int ov5640_set_ctrl_vflip(struct ov5640_dev *sensor, int value)
{
/* If sensor is mounted upside down, flip logic is inversed */
/*
* TIMING TC REG20:
* - [2]: ISP vflip
* - [1]: Sensor vflip
*/
return ov5640_mod_reg(sensor, OV5640_REG_TIMING_TC_REG20,
BIT(2) | BIT(1),
(value ^ sensor->upside_down) ?
(BIT(2) | BIT(1)) : 0);
}
static int ov5640_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
{
struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
struct ov5640_dev *sensor = to_ov5640_dev(sd);
int val;
/* v4l2_ctrl_lock() locks our own mutex */
switch (ctrl->id) {
case V4L2_CID_AUTOGAIN:
val = ov5640_get_gain(sensor);
if (val < 0)
return val;
sensor->ctrls.gain->val = val;
break;
case V4L2_CID_EXPOSURE_AUTO:
val = ov5640_get_exposure(sensor);
if (val < 0)
return val;
sensor->ctrls.exposure->val = val;
break;
}
return 0;
}
static int ov5640_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
struct ov5640_dev *sensor = to_ov5640_dev(sd);
int ret;
/* v4l2_ctrl_lock() locks our own mutex */
/*
* If the device is not powered up by the host driver do
* not apply any controls to H/W at this time. Instead
* the controls will be restored right after power-up.
*/
if (sensor->power_count == 0)
return 0;
switch (ctrl->id) {
case V4L2_CID_AUTOGAIN:
ret = ov5640_set_ctrl_gain(sensor, ctrl->val);
break;
case V4L2_CID_EXPOSURE_AUTO:
ret = ov5640_set_ctrl_exposure(sensor, ctrl->val);
break;
case V4L2_CID_AUTO_WHITE_BALANCE:
ret = ov5640_set_ctrl_white_balance(sensor, ctrl->val);
break;
case V4L2_CID_HUE:
ret = ov5640_set_ctrl_hue(sensor, ctrl->val);
break;
case V4L2_CID_CONTRAST:
ret = ov5640_set_ctrl_contrast(sensor, ctrl->val);
break;
case V4L2_CID_SATURATION:
ret = ov5640_set_ctrl_saturation(sensor, ctrl->val);
break;
case V4L2_CID_TEST_PATTERN:
ret = ov5640_set_ctrl_test_pattern(sensor, ctrl->val);
break;
case V4L2_CID_POWER_LINE_FREQUENCY:
ret = ov5640_set_ctrl_light_freq(sensor, ctrl->val);
break;
case V4L2_CID_HFLIP:
ret = ov5640_set_ctrl_hflip(sensor, ctrl->val);
break;
case V4L2_CID_VFLIP:
ret = ov5640_set_ctrl_vflip(sensor, ctrl->val);
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static const struct v4l2_ctrl_ops ov5640_ctrl_ops = {
.g_volatile_ctrl = ov5640_g_volatile_ctrl,
.s_ctrl = ov5640_s_ctrl,
};
static int ov5640_init_controls(struct ov5640_dev *sensor)
{
const struct v4l2_ctrl_ops *ops = &ov5640_ctrl_ops;
struct ov5640_ctrls *ctrls = &sensor->ctrls;
struct v4l2_ctrl_handler *hdl = &ctrls->handler;
int ret;
v4l2_ctrl_handler_init(hdl, 32);
/* we can use our own mutex for the ctrl lock */
hdl->lock = &sensor->lock;
/* Clock related controls */
ctrls->pixel_rate = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_PIXEL_RATE,
0, INT_MAX, 1,
ov5640_calc_pixel_rate(sensor));
/* Auto/manual white balance */
ctrls->auto_wb = v4l2_ctrl_new_std(hdl, ops,
V4L2_CID_AUTO_WHITE_BALANCE,
0, 1, 1, 1);
ctrls->blue_balance = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BLUE_BALANCE,
0, 4095, 1, 0);
ctrls->red_balance = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_RED_BALANCE,
0, 4095, 1, 0);
/* Auto/manual exposure */
ctrls->auto_exp = v4l2_ctrl_new_std_menu(hdl, ops,
V4L2_CID_EXPOSURE_AUTO,
V4L2_EXPOSURE_MANUAL, 0,
V4L2_EXPOSURE_AUTO);
ctrls->exposure = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_EXPOSURE,
0, 65535, 1, 0);
/* Auto/manual gain */
ctrls->auto_gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_AUTOGAIN,
0, 1, 1, 1);
ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAIN,
0, 1023, 1, 0);
ctrls->saturation = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION,
0, 255, 1, 64);
ctrls->hue = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HUE,
0, 359, 1, 0);
ctrls->contrast = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST,
0, 255, 1, 0);
ctrls->test_pattern =
v4l2_ctrl_new_std_menu_items(hdl, ops, V4L2_CID_TEST_PATTERN,
ARRAY_SIZE(test_pattern_menu) - 1,
0, 0, test_pattern_menu);
ctrls->hflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HFLIP,
0, 1, 1, 0);
ctrls->vflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VFLIP,
0, 1, 1, 0);
ctrls->light_freq =
v4l2_ctrl_new_std_menu(hdl, ops,
V4L2_CID_POWER_LINE_FREQUENCY,
V4L2_CID_POWER_LINE_FREQUENCY_AUTO, 0,
V4L2_CID_POWER_LINE_FREQUENCY_50HZ);
if (hdl->error) {
ret = hdl->error;
goto free_ctrls;
}
ctrls->pixel_rate->flags |= V4L2_CTRL_FLAG_READ_ONLY;
ctrls->gain->flags |= V4L2_CTRL_FLAG_VOLATILE;
ctrls->exposure->flags |= V4L2_CTRL_FLAG_VOLATILE;
v4l2_ctrl_auto_cluster(3, &ctrls->auto_wb, 0, false);
v4l2_ctrl_auto_cluster(2, &ctrls->auto_gain, 0, true);
v4l2_ctrl_auto_cluster(2, &ctrls->auto_exp, 1, true);
sensor->sd.ctrl_handler = hdl;
return 0;
free_ctrls:
v4l2_ctrl_handler_free(hdl);
return ret;
}
static int ov5640_enum_frame_size(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_frame_size_enum *fse)
{
if (fse->pad != 0)
return -EINVAL;
if (fse->index >= OV5640_NUM_MODES)
return -EINVAL;
fse->min_width =
ov5640_mode_data[fse->index].hact;
fse->max_width = fse->min_width;
fse->min_height =
ov5640_mode_data[fse->index].vact;
fse->max_height = fse->min_height;
return 0;
}
static int ov5640_enum_frame_interval(
struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_frame_interval_enum *fie)
{
struct ov5640_dev *sensor = to_ov5640_dev(sd);
struct v4l2_fract tpf;
int ret;
if (fie->pad != 0)
return -EINVAL;
if (fie->index >= OV5640_NUM_FRAMERATES)
return -EINVAL;
tpf.numerator = 1;
tpf.denominator = ov5640_framerates[fie->index];
ret = ov5640_try_frame_interval(sensor, &tpf,
fie->width, fie->height);
if (ret < 0)
return -EINVAL;
fie->interval = tpf;
return 0;
}
static int ov5640_g_frame_interval(struct v4l2_subdev *sd,
struct v4l2_subdev_frame_interval *fi)
{
struct ov5640_dev *sensor = to_ov5640_dev(sd);
mutex_lock(&sensor->lock);
fi->interval = sensor->frame_interval;
mutex_unlock(&sensor->lock);
return 0;
}
static int ov5640_s_frame_interval(struct v4l2_subdev *sd,
struct v4l2_subdev_frame_interval *fi)
{
struct ov5640_dev *sensor = to_ov5640_dev(sd);
const struct ov5640_mode_info *mode;
int frame_rate, ret = 0;
if (fi->pad != 0)
return -EINVAL;
mutex_lock(&sensor->lock);
if (sensor->streaming) {
ret = -EBUSY;
goto out;
}
mode = sensor->current_mode;
frame_rate = ov5640_try_frame_interval(sensor, &fi->interval,
mode->hact, mode->vact);
if (frame_rate < 0) {
/* Always return a valid frame interval value */
fi->interval = sensor->frame_interval;
goto out;
}
mode = ov5640_find_mode(sensor, frame_rate, mode->hact,
mode->vact, true);
if (!mode) {
ret = -EINVAL;
goto out;
}
if (mode != sensor->current_mode ||
frame_rate != sensor->current_fr) {
sensor->current_fr = frame_rate;
sensor->frame_interval = fi->interval;
sensor->current_mode = mode;
sensor->pending_mode_change = true;
__v4l2_ctrl_s_ctrl_int64(sensor->ctrls.pixel_rate,
ov5640_calc_pixel_rate(sensor));
}
out:
mutex_unlock(&sensor->lock);
return ret;
}
static int ov5640_enum_mbus_code(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_mbus_code_enum *code)
{
if (code->pad != 0)
return -EINVAL;
if (code->index >= ARRAY_SIZE(ov5640_formats))
return -EINVAL;
code->code = ov5640_formats[code->index].code;
return 0;
}
static int ov5640_s_stream(struct v4l2_subdev *sd, int enable)
{
struct ov5640_dev *sensor = to_ov5640_dev(sd);
int ret = 0;
mutex_lock(&sensor->lock);
if (sensor->streaming == !enable) {
if (enable && sensor->pending_mode_change) {
ret = ov5640_set_mode(sensor);
if (ret)
goto out;
}
if (enable && sensor->pending_fmt_change) {
ret = ov5640_set_framefmt(sensor, &sensor->fmt);
if (ret)
goto out;
sensor->pending_fmt_change = false;
}
if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY)
ret = ov5640_set_stream_mipi(sensor, enable);
else
ret = ov5640_set_stream_dvp(sensor, enable);
if (!ret)
sensor->streaming = enable;
}
out:
mutex_unlock(&sensor->lock);
return ret;
}
static const struct v4l2_subdev_core_ops ov5640_core_ops = {
.s_power = ov5640_s_power,
.log_status = v4l2_ctrl_subdev_log_status,
.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
.unsubscribe_event = v4l2_event_subdev_unsubscribe,
};
static const struct v4l2_subdev_video_ops ov5640_video_ops = {
.g_frame_interval = ov5640_g_frame_interval,
.s_frame_interval = ov5640_s_frame_interval,
.s_stream = ov5640_s_stream,
};
static const struct v4l2_subdev_pad_ops ov5640_pad_ops = {
.enum_mbus_code = ov5640_enum_mbus_code,
.get_fmt = ov5640_get_fmt,
.set_fmt = ov5640_set_fmt,
.enum_frame_size = ov5640_enum_frame_size,
.enum_frame_interval = ov5640_enum_frame_interval,
};
static const struct v4l2_subdev_ops ov5640_subdev_ops = {
.core = &ov5640_core_ops,
.video = &ov5640_video_ops,
.pad = &ov5640_pad_ops,
};
static int ov5640_get_regulators(struct ov5640_dev *sensor)
{
int i;
for (i = 0; i < OV5640_NUM_SUPPLIES; i++)
sensor->supplies[i].supply = ov5640_supply_name[i];
return devm_regulator_bulk_get(&sensor->i2c_client->dev,
OV5640_NUM_SUPPLIES,
sensor->supplies);
}
static int ov5640_check_chip_id(struct ov5640_dev *sensor)
{
struct i2c_client *client = sensor->i2c_client;
int ret = 0;
u16 chip_id;
ret = ov5640_set_power_on(sensor);
if (ret)
return ret;
ret = ov5640_read_reg16(sensor, OV5640_REG_CHIP_ID, &chip_id);
if (ret) {
dev_err(&client->dev, "%s: failed to read chip identifier\n",
__func__);
goto power_off;
}
if (chip_id != 0x5640) {
dev_err(&client->dev, "%s: wrong chip identifier, expected 0x5640, got 0x%x\n",
__func__, chip_id);
ret = -ENXIO;
}
power_off:
ov5640_set_power_off(sensor);
return ret;
}
static int ov5640_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct fwnode_handle *endpoint;
struct ov5640_dev *sensor;
struct v4l2_mbus_framefmt *fmt;
u32 rotation;
int ret;
sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
if (!sensor)
return -ENOMEM;
sensor->i2c_client = client;
/*
* default init sequence initialize sensor to
* YUV422 UYVY VGA@30fps
*/
fmt = &sensor->fmt;
fmt->code = MEDIA_BUS_FMT_UYVY8_2X8;
fmt->colorspace = V4L2_COLORSPACE_SRGB;
fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace);
fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE;
fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt->colorspace);
fmt->width = 640;
fmt->height = 480;
fmt->field = V4L2_FIELD_NONE;
sensor->frame_interval.numerator = 1;
sensor->frame_interval.denominator = ov5640_framerates[OV5640_30_FPS];
sensor->current_fr = OV5640_30_FPS;
sensor->current_mode =
&ov5640_mode_data[OV5640_MODE_VGA_640_480];
sensor->last_mode = sensor->current_mode;
sensor->ae_target = 52;
/* optional indication of physical rotation of sensor */
ret = fwnode_property_read_u32(dev_fwnode(&client->dev), "rotation",
&rotation);
if (!ret) {
switch (rotation) {
case 180:
sensor->upside_down = true;
/* fall through */
case 0:
break;
default:
dev_warn(dev, "%u degrees rotation is not supported, ignoring...\n",
rotation);
}
}
endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev),
NULL);
if (!endpoint) {
dev_err(dev, "endpoint node not found\n");
return -EINVAL;
}
ret = v4l2_fwnode_endpoint_parse(endpoint, &sensor->ep);
fwnode_handle_put(endpoint);
if (ret) {
dev_err(dev, "Could not parse endpoint\n");
return ret;
}
/* get system clock (xclk) */
sensor->xclk = devm_clk_get(dev, "xclk");
if (IS_ERR(sensor->xclk)) {
dev_err(dev, "failed to get xclk\n");
return PTR_ERR(sensor->xclk);
}
sensor->xclk_freq = clk_get_rate(sensor->xclk);
if (sensor->xclk_freq < OV5640_XCLK_MIN ||
sensor->xclk_freq > OV5640_XCLK_MAX) {
dev_err(dev, "xclk frequency out of range: %d Hz\n",
sensor->xclk_freq);
return -EINVAL;
}
/* request optional power down pin */
sensor->pwdn_gpio = devm_gpiod_get_optional(dev, "powerdown",
GPIOD_OUT_HIGH);
if (IS_ERR(sensor->pwdn_gpio))
return PTR_ERR(sensor->pwdn_gpio);
/* request optional reset pin */
sensor->reset_gpio = devm_gpiod_get_optional(dev, "reset",
GPIOD_OUT_HIGH);
if (IS_ERR(sensor->reset_gpio))
return PTR_ERR(sensor->reset_gpio);
v4l2_i2c_subdev_init(&sensor->sd, client, &ov5640_subdev_ops);
sensor->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
V4L2_SUBDEV_FL_HAS_EVENTS;
sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
sensor->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
ret = media_entity_pads_init(&sensor->sd.entity, 1, &sensor->pad);
if (ret)
return ret;
ret = ov5640_get_regulators(sensor);
if (ret)
return ret;
mutex_init(&sensor->lock);
ret = ov5640_check_chip_id(sensor);
if (ret)
goto entity_cleanup;
ret = ov5640_init_controls(sensor);
if (ret)
goto entity_cleanup;
ret = v4l2_async_register_subdev_sensor_common(&sensor->sd);
if (ret)
goto free_ctrls;
return 0;
free_ctrls:
v4l2_ctrl_handler_free(&sensor->ctrls.handler);
entity_cleanup:
mutex_destroy(&sensor->lock);
media_entity_cleanup(&sensor->sd.entity);
return ret;
}
static int ov5640_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct ov5640_dev *sensor = to_ov5640_dev(sd);
v4l2_async_unregister_subdev(&sensor->sd);
mutex_destroy(&sensor->lock);
media_entity_cleanup(&sensor->sd.entity);
v4l2_ctrl_handler_free(&sensor->ctrls.handler);
return 0;
}
static const struct i2c_device_id ov5640_id[] = {
{"ov5640", 0},
{},
};
MODULE_DEVICE_TABLE(i2c, ov5640_id);
static const struct of_device_id ov5640_dt_ids[] = {
{ .compatible = "ovti,ov5640" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, ov5640_dt_ids);
static struct i2c_driver ov5640_i2c_driver = {
.driver = {
.name = "ov5640",
.of_match_table = ov5640_dt_ids,
},
.id_table = ov5640_id,
.probe_new = ov5640_probe,
.remove = ov5640_remove,
};
module_i2c_driver(ov5640_i2c_driver);
MODULE_DESCRIPTION("OV5640 MIPI Camera Subdev Driver");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink