mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 01:15:38 +07:00
17470b7da1
This adds the TPG110 TDO43MTEA2 24-bit RGB LCD panel and sets up the Nomadik device tree to activate the CLCD and connect it to this panel. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
884 lines
20 KiB
Plaintext
884 lines
20 KiB
Plaintext
/*
|
|
* Device Tree for the ST-Ericsson Nomadik 8815 STn8815 SoC
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include "skeleton.dtsi"
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
memory {
|
|
reg = <0x00000000 0x04000000>,
|
|
<0x08000000 0x04000000>;
|
|
};
|
|
|
|
L2: l2-cache {
|
|
compatible = "arm,l210-cache";
|
|
reg = <0x10210000 0x1000>;
|
|
interrupt-parent = <&vica>;
|
|
interrupts = <30>;
|
|
cache-unified;
|
|
cache-level = <2>;
|
|
cache-size = <131072>;
|
|
cache-sets = <512>;
|
|
cache-line-size = <32>;
|
|
/* At full speed latency must be >=2 */
|
|
arm,tag-latency = <8>;
|
|
arm,data-latency = <8 8>;
|
|
arm,dirty-latency = <8>;
|
|
};
|
|
|
|
mtu0: mtu@101e2000 {
|
|
/* Nomadik system timer */
|
|
compatible = "st,nomadik-mtu";
|
|
reg = <0x101e2000 0x1000>;
|
|
interrupt-parent = <&vica>;
|
|
interrupts = <4>;
|
|
clocks = <&timclk>, <&pclk>;
|
|
clock-names = "timclk", "apb_pclk";
|
|
};
|
|
|
|
mtu1: mtu@101e3000 {
|
|
/* Secondary timer */
|
|
reg = <0x101e3000 0x1000>;
|
|
interrupt-parent = <&vica>;
|
|
interrupts = <5>;
|
|
clocks = <&timclk>, <&pclk>;
|
|
clock-names = "timclk", "apb_pclk";
|
|
};
|
|
|
|
gpio0: gpio@101e4000 {
|
|
compatible = "st,nomadik-gpio";
|
|
reg = <0x101e4000 0x80>;
|
|
interrupt-parent = <&vica>;
|
|
interrupts = <6>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-bank = <0>;
|
|
gpio-ranges = <&pinctrl 0 0 32>;
|
|
clocks = <&pclk>;
|
|
};
|
|
|
|
gpio1: gpio@101e5000 {
|
|
compatible = "st,nomadik-gpio";
|
|
reg = <0x101e5000 0x80>;
|
|
interrupt-parent = <&vica>;
|
|
interrupts = <7>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-bank = <1>;
|
|
gpio-ranges = <&pinctrl 0 32 32>;
|
|
clocks = <&pclk>;
|
|
};
|
|
|
|
gpio2: gpio@101e6000 {
|
|
compatible = "st,nomadik-gpio";
|
|
reg = <0x101e6000 0x80>;
|
|
interrupt-parent = <&vica>;
|
|
interrupts = <8>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-bank = <2>;
|
|
gpio-ranges = <&pinctrl 0 64 32>;
|
|
clocks = <&pclk>;
|
|
};
|
|
|
|
gpio3: gpio@101e7000 {
|
|
compatible = "st,nomadik-gpio";
|
|
reg = <0x101e7000 0x80>;
|
|
ngpio = <28>;
|
|
interrupt-parent = <&vica>;
|
|
interrupts = <9>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-bank = <3>;
|
|
gpio-ranges = <&pinctrl 0 96 28>;
|
|
clocks = <&pclk>;
|
|
};
|
|
|
|
pinctrl: pinctrl {
|
|
compatible = "stericsson,stn8815-pinctrl";
|
|
nomadik-gpio-chips = <&gpio0>, <&gpio1>, <&gpio2>, <&gpio3>;
|
|
/* Pin configurations */
|
|
uart1 {
|
|
uart1_default_mux: uart1_mux {
|
|
u1_default_mux {
|
|
function = "u1";
|
|
groups = "u1_a_1";
|
|
};
|
|
};
|
|
};
|
|
mmcsd {
|
|
mmcsd_default_mux: mmcsd_mux {
|
|
mmcsd_default_mux {
|
|
function = "mmcsd";
|
|
groups = "mmcsd_a_1", "mmcsd_b_1";
|
|
};
|
|
};
|
|
mmcsd_default_mode: mmcsd_default {
|
|
mmcsd_default_cfg1 {
|
|
/*
|
|
* MCCLK, MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2
|
|
* MCCMD, MCDAT3-0, MCMSFBCLK
|
|
*/
|
|
pins = "GPIO8_B10", "GPIO9_A10", "GPIO10_C11", "GPIO11_B11",
|
|
"GPIO12_A11", "GPIO13_C12", "GPIO14_B12", "GPIO15_A12",
|
|
"GPIO16_C13", "GPIO23_D15", "GPIO24_C15";
|
|
ste,output = <2>;
|
|
};
|
|
};
|
|
};
|
|
i2c0 {
|
|
i2c0_default_mux: i2c0_mux {
|
|
i2c0_default_mux {
|
|
function = "i2c0";
|
|
groups = "i2c0_a_1";
|
|
};
|
|
};
|
|
i2c0_default_mode: i2c0_default {
|
|
i2c0_default_cfg {
|
|
pins = "GPIO62_D3", "GPIO63_D2";
|
|
ste,input = <0>;
|
|
};
|
|
};
|
|
};
|
|
i2c1 {
|
|
i2c1_default_mux: i2c1_mux {
|
|
i2c1_default_mux {
|
|
function = "i2c1";
|
|
groups = "i2c1_a_1";
|
|
};
|
|
};
|
|
i2c1_default_mode: i2c1_default {
|
|
i2c1_default_cfg {
|
|
pins = "GPIO53_L4", "GPIO54_L3";
|
|
ste,input = <0>;
|
|
};
|
|
};
|
|
};
|
|
clcd {
|
|
/*
|
|
* This should be activated to use the additional
|
|
* 8 lines for bits 16 thru 23 from the CLCD block.
|
|
*/
|
|
clcd_24bit_mux: clcd_mux {
|
|
clcd_24bit_mux {
|
|
function = "clcd";
|
|
groups = "clcd_16_23_b_1";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
/* Power Management Unit */
|
|
pmu: pmu@101e9000 {
|
|
compatible = "stericsson,nomadik-pmu", "syscon";
|
|
reg = <0x101e0000 0x1000>;
|
|
};
|
|
|
|
src: src@101e0000 {
|
|
compatible = "stericsson,nomadik-src";
|
|
reg = <0x101e0000 0x1000>;
|
|
|
|
/*
|
|
* MXTAL "Main Chrystal" is a chrystal oscillator @19.2 MHz
|
|
* that is parent of TIMCLK, PLL1 and PLL2
|
|
*/
|
|
mxtal: mxtal@19.2M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <19200000>;
|
|
};
|
|
|
|
/*
|
|
* The 2.4 MHz TIMCLK reference clock is active at
|
|
* boot time, this is actually the MXTALCLK @19.2 MHz
|
|
* divided by 8. This clock is used by the timers and
|
|
* watchdog. See page 105 ff.
|
|
*/
|
|
timclk: timclk@2.4M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-factor-clock";
|
|
clock-div = <8>;
|
|
clock-mult = <1>;
|
|
clocks = <&mxtal>;
|
|
};
|
|
|
|
/* PLL1 is locked to MXTALI and variable from 20.4 to 334 MHz */
|
|
pll1: pll1@0 {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-pll-clock";
|
|
pll-id = <1>;
|
|
clocks = <&mxtal>;
|
|
};
|
|
|
|
/* HCLK divides the PLL1 with 1,2,3 or 4 */
|
|
hclk: hclk@0 {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-hclk-clock";
|
|
clocks = <&pll1>;
|
|
};
|
|
/* The PCLK domain uses HCLK right off */
|
|
pclk: pclk@0 {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-factor-clock";
|
|
clock-div = <1>;
|
|
clock-mult = <1>;
|
|
clocks = <&hclk>;
|
|
};
|
|
|
|
/* PLL2 is usually 864 MHz and divided into a few fixed rates */
|
|
pll2: pll2@0 {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-pll-clock";
|
|
pll-id = <2>;
|
|
clocks = <&mxtal>;
|
|
};
|
|
clk216: clk216@216M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-factor-clock";
|
|
clock-div = <4>;
|
|
clock-mult = <1>;
|
|
clocks = <&pll2>;
|
|
};
|
|
clk108: clk108@108M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-factor-clock";
|
|
clock-div = <2>;
|
|
clock-mult = <1>;
|
|
clocks = <&clk216>;
|
|
};
|
|
clk72: clk72@72M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-factor-clock";
|
|
/* The data sheet does not say how this is derived */
|
|
clock-div = <12>;
|
|
clock-mult = <1>;
|
|
clocks = <&pll2>;
|
|
};
|
|
clk48: clk48@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-factor-clock";
|
|
/* The data sheet does not say how this is derived */
|
|
clock-div = <18>;
|
|
clock-mult = <1>;
|
|
clocks = <&pll2>;
|
|
};
|
|
clk27: clk27@27M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-factor-clock";
|
|
clock-div = <4>;
|
|
clock-mult = <1>;
|
|
clocks = <&clk108>;
|
|
};
|
|
|
|
/* This apparently exists as well */
|
|
ulpiclk: ulpiclk@60M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <60000000>;
|
|
};
|
|
|
|
/*
|
|
* IP AMBA bus clocks, driving the bus side of the
|
|
* peripheral clocking, clock gates.
|
|
*/
|
|
|
|
hclkdma0: hclkdma0@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <0>;
|
|
clocks = <&hclk>;
|
|
};
|
|
hclksmc: hclksmc@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <1>;
|
|
clocks = <&hclk>;
|
|
};
|
|
hclksdram: hclksdram@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <2>;
|
|
clocks = <&hclk>;
|
|
};
|
|
hclkdma1: hclkdma1@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <3>;
|
|
clocks = <&hclk>;
|
|
};
|
|
hclkclcd: hclkclcd@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <4>;
|
|
clocks = <&hclk>;
|
|
};
|
|
pclkirda: pclkirda@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <5>;
|
|
clocks = <&pclk>;
|
|
};
|
|
pclkssp: pclkssp@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <6>;
|
|
clocks = <&pclk>;
|
|
};
|
|
pclkuart0: pclkuart0@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <7>;
|
|
clocks = <&pclk>;
|
|
};
|
|
pclksdi: pclksdi@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <8>;
|
|
clocks = <&pclk>;
|
|
};
|
|
pclki2c0: pclki2c0@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <9>;
|
|
clocks = <&pclk>;
|
|
};
|
|
pclki2c1: pclki2c1@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <10>;
|
|
clocks = <&pclk>;
|
|
};
|
|
pclkuart1: pclkuart1@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <11>;
|
|
clocks = <&pclk>;
|
|
};
|
|
pclkmsp0: pclkmsp0@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <12>;
|
|
clocks = <&pclk>;
|
|
};
|
|
hclkusb: hclkusb@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <13>;
|
|
clocks = <&hclk>;
|
|
};
|
|
hclkdif: hclkdif@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <14>;
|
|
clocks = <&hclk>;
|
|
};
|
|
hclksaa: hclksaa@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <15>;
|
|
clocks = <&hclk>;
|
|
};
|
|
hclksva: hclksva@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <16>;
|
|
clocks = <&hclk>;
|
|
};
|
|
pclkhsi: pclkhsi@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <17>;
|
|
clocks = <&pclk>;
|
|
};
|
|
pclkxti: pclkxti@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <18>;
|
|
clocks = <&pclk>;
|
|
};
|
|
pclkuart2: pclkuart2@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <19>;
|
|
clocks = <&pclk>;
|
|
};
|
|
pclkmsp1: pclkmsp1@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <20>;
|
|
clocks = <&pclk>;
|
|
};
|
|
pclkmsp2: pclkmsp2@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <21>;
|
|
clocks = <&pclk>;
|
|
};
|
|
pclkowm: pclkowm@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <22>;
|
|
clocks = <&pclk>;
|
|
};
|
|
hclkhpi: hclkhpi@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <23>;
|
|
clocks = <&hclk>;
|
|
};
|
|
pclkske: pclkske@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <24>;
|
|
clocks = <&pclk>;
|
|
};
|
|
pclkhsem: pclkhsem@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <25>;
|
|
clocks = <&pclk>;
|
|
};
|
|
hclk3d: hclk3d@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <26>;
|
|
clocks = <&hclk>;
|
|
};
|
|
hclkhash: hclkhash@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <27>;
|
|
clocks = <&hclk>;
|
|
};
|
|
hclkcryp: hclkcryp@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <28>;
|
|
clocks = <&hclk>;
|
|
};
|
|
pclkmshc: pclkmshc@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <29>;
|
|
clocks = <&pclk>;
|
|
};
|
|
hclkusbm: hclkusbm@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <30>;
|
|
clocks = <&hclk>;
|
|
};
|
|
hclkrng: hclkrng@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <31>;
|
|
clocks = <&hclk>;
|
|
};
|
|
|
|
/* IP kernel clocks */
|
|
clcdclk: clcdclk@0 {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <36>;
|
|
clocks = <&clk72 &clk48>;
|
|
};
|
|
irdaclk: irdaclk@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <37>;
|
|
clocks = <&clk48>;
|
|
};
|
|
sspiclk: sspiclk@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <38>;
|
|
clocks = <&clk48>;
|
|
};
|
|
uart0clk: uart0clk@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <39>;
|
|
clocks = <&clk48>;
|
|
};
|
|
sdiclk: sdiclk@48M {
|
|
/* Also called MCCLK in some documents */
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <40>;
|
|
clocks = <&clk48>;
|
|
};
|
|
i2c0clk: i2c0clk@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <41>;
|
|
clocks = <&clk48>;
|
|
};
|
|
i2c1clk: i2c1clk@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <42>;
|
|
clocks = <&clk48>;
|
|
};
|
|
uart1clk: uart1clk@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <43>;
|
|
clocks = <&clk48>;
|
|
};
|
|
mspclk0: mspclk0@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <44>;
|
|
clocks = <&clk48>;
|
|
};
|
|
usbclk: usbclk@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <45>;
|
|
clocks = <&clk48>; /* 48 MHz not ULPI */
|
|
};
|
|
difclk: difclk@72M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <46>;
|
|
clocks = <&clk72>;
|
|
};
|
|
ipi2cclk: ipi2cclk@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <47>;
|
|
clocks = <&clk48>; /* Guess */
|
|
};
|
|
ipbmcclk: ipbmcclk@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <48>;
|
|
clocks = <&clk48>; /* Guess */
|
|
};
|
|
hsiclkrx: hsiclkrx@216M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <49>;
|
|
clocks = <&clk216>;
|
|
};
|
|
hsiclktx: hsiclktx@108M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <50>;
|
|
clocks = <&clk108>;
|
|
};
|
|
uart2clk: uart2clk@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <51>;
|
|
clocks = <&clk48>;
|
|
};
|
|
mspclk1: mspclk1@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <52>;
|
|
clocks = <&clk48>;
|
|
};
|
|
mspclk2: mspclk2@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <53>;
|
|
clocks = <&clk48>;
|
|
};
|
|
owmclk: owmclk@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <54>;
|
|
clocks = <&clk48>; /* Guess */
|
|
};
|
|
skeclk: skeclk@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <56>;
|
|
clocks = <&clk48>; /* Guess */
|
|
};
|
|
x3dclk: x3dclk@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <58>;
|
|
clocks = <&clk48>; /* Guess */
|
|
};
|
|
pclkmsp3: pclkmsp3@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <59>;
|
|
clocks = <&pclk>;
|
|
};
|
|
mspclk3: mspclk3@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <60>;
|
|
clocks = <&clk48>;
|
|
};
|
|
mshcclk: mshcclk@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <61>;
|
|
clocks = <&clk48>; /* Guess */
|
|
};
|
|
usbmclk: usbmclk@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <62>;
|
|
/* Stated as "48 MHz not ULPI clock" */
|
|
clocks = <&clk48>;
|
|
};
|
|
rngcclk: rngcclk@48M {
|
|
#clock-cells = <0>;
|
|
compatible = "st,nomadik-src-clock";
|
|
clock-id = <63>;
|
|
clocks = <&clk48>; /* Guess */
|
|
};
|
|
};
|
|
|
|
/* A NAND flash of 128 MiB */
|
|
fsmc: flash@40000000 {
|
|
compatible = "stericsson,fsmc-nand";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x10100000 0x1000>, /* FSMC Register*/
|
|
<0x40000000 0x2000>, /* NAND Base DATA */
|
|
<0x41000000 0x2000>, /* NAND Base ADDR */
|
|
<0x40800000 0x2000>; /* NAND Base CMD */
|
|
reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
|
|
clocks = <&hclksmc>;
|
|
status = "okay";
|
|
timings = /bits/ 8 <0 0 0 0x10 0x0a 0>;
|
|
|
|
partition@0 {
|
|
label = "X-Loader(NAND)";
|
|
reg = <0x0 0x40000>;
|
|
};
|
|
partition@40000 {
|
|
label = "MemInit(NAND)";
|
|
reg = <0x40000 0x40000>;
|
|
};
|
|
partition@80000 {
|
|
label = "BootLoader(NAND)";
|
|
reg = <0x80000 0x200000>;
|
|
};
|
|
partition@280000 {
|
|
label = "Kernel zImage(NAND)";
|
|
reg = <0x280000 0x300000>;
|
|
};
|
|
partition@580000 {
|
|
label = "Root Filesystem(NAND)";
|
|
reg = <0x580000 0x1600000>;
|
|
};
|
|
partition@1b80000 {
|
|
label = "User Filesystem(NAND)";
|
|
reg = <0x1b80000 0x6480000>;
|
|
};
|
|
};
|
|
|
|
/* I2C0 connected to the STw4811 power management chip */
|
|
i2c0 {
|
|
compatible = "st,nomadik-i2c", "arm,primecell";
|
|
reg = <0x101f8000 0x1000>;
|
|
interrupt-parent = <&vica>;
|
|
interrupts = <20>;
|
|
clock-frequency = <100000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&i2c0clk>, <&pclki2c0>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>;
|
|
|
|
stw4811@2d {
|
|
compatible = "st,stw4811";
|
|
reg = <0x2d>;
|
|
vmmc_regulator: vmmc {
|
|
compatible = "st,stw481x-vmmc";
|
|
regulator-name = "VMMC";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
/* I2C1 connected to various sensors */
|
|
i2c1 {
|
|
compatible = "st,nomadik-i2c", "arm,primecell";
|
|
reg = <0x101f7000 0x1000>;
|
|
interrupt-parent = <&vica>;
|
|
interrupts = <21>;
|
|
clock-frequency = <100000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&i2c1clk>, <&pclki2c1>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>;
|
|
|
|
camera@2d {
|
|
compatible = "st,camera";
|
|
reg = <0x10>;
|
|
};
|
|
stw5095@1a {
|
|
compatible = "st,stw5095";
|
|
reg = <0x1a>;
|
|
};
|
|
};
|
|
|
|
amba {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
clcd@10120000 {
|
|
compatible = "arm,pl110", "arm,primecell";
|
|
reg = <0x10120000 0x1000>;
|
|
interrupt-names = "combined";
|
|
interrupts = <14>;
|
|
clocks = <&clcdclk>, <&hclkclcd>;
|
|
clock-names = "clcdclk", "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
vica: intc@10140000 {
|
|
compatible = "arm,versatile-vic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x10140000 0x20>;
|
|
};
|
|
|
|
vicb: intc@10140020 {
|
|
compatible = "arm,versatile-vic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x10140020 0x20>;
|
|
};
|
|
|
|
uart0: uart@101fd000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x101fd000 0x1000>;
|
|
interrupt-parent = <&vica>;
|
|
interrupts = <12>;
|
|
clocks = <&uart0clk>, <&pclkuart0>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
status = "disabled";
|
|
dmas = <&dmac0 14 1>,
|
|
<&dmac0 15 1>;
|
|
dma-names = "rx", "tx";
|
|
};
|
|
|
|
uart1: uart@101fb000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x101fb000 0x1000>;
|
|
interrupt-parent = <&vica>;
|
|
interrupts = <17>;
|
|
clocks = <&uart1clk>, <&pclkuart1>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_default_mux>;
|
|
dmas = <&dmac1 22 1>,
|
|
<&dmac1 23 1>;
|
|
dma-names = "rx", "tx";
|
|
};
|
|
|
|
uart2: uart@101f2000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x101f2000 0x1000>;
|
|
interrupt-parent = <&vica>;
|
|
interrupts = <28>;
|
|
clocks = <&uart2clk>, <&pclkuart2>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
status = "disabled";
|
|
dmas = <&dmac1 30 1>,
|
|
<&dmac1 31 1>;
|
|
dma-names = "rx", "tx";
|
|
};
|
|
|
|
rng: rng@101b0000 {
|
|
compatible = "arm,primecell";
|
|
reg = <0x101b0000 0x1000>;
|
|
clocks = <&rngcclk>, <&hclkrng>;
|
|
clock-names = "rng", "apb_pclk";
|
|
};
|
|
|
|
rtc: rtc@101e8000 {
|
|
compatible = "arm,pl031", "arm,primecell";
|
|
reg = <0x101e8000 0x1000>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
interrupt-parent = <&vica>;
|
|
interrupts = <10>;
|
|
};
|
|
|
|
mmcsd: sdi@101f6000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
reg = <0x101f6000 0x1000>;
|
|
clocks = <&sdiclk>, <&pclksdi>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
interrupt-parent = <&vica>;
|
|
interrupts = <22>;
|
|
max-frequency = <400000>;
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
full-pwr-cycle;
|
|
/*
|
|
* The STw4811 circuit used with the Nomadik strictly
|
|
* requires that all of these signal direction pins be
|
|
* routed and used for its 4-bit levelshifter.
|
|
*/
|
|
st,sig-dir-dat0;
|
|
st,sig-dir-dat2;
|
|
st,sig-dir-dat31;
|
|
st,sig-dir-cmd;
|
|
st,sig-pin-fbclk;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
|
|
vmmc-supply = <&vmmc_regulator>;
|
|
};
|
|
|
|
dmac0: dma-controller@10130000 {
|
|
compatible = "arm,pl080", "arm,primecell";
|
|
reg = <0x10130000 0x1000>;
|
|
interrupt-parent = <&vica>;
|
|
interrupts = <15>;
|
|
clocks = <&hclkdma0>;
|
|
clock-names = "apb_pclk";
|
|
lli-bus-interface-ahb1;
|
|
lli-bus-interface-ahb2;
|
|
mem-bus-interface-ahb2;
|
|
memcpy-burst-size = <256>;
|
|
memcpy-bus-width = <32>;
|
|
#dma-cells = <2>;
|
|
};
|
|
dmac1: dma-controller@10150000 {
|
|
compatible = "arm,pl080", "arm,primecell";
|
|
reg = <0x10150000 0x1000>;
|
|
interrupt-parent = <&vica>;
|
|
interrupts = <13>;
|
|
clocks = <&hclkdma1>;
|
|
clock-names = "apb_pclk";
|
|
lli-bus-interface-ahb1;
|
|
lli-bus-interface-ahb2;
|
|
mem-bus-interface-ahb2;
|
|
memcpy-burst-size = <256>;
|
|
memcpy-bus-width = <32>;
|
|
#dma-cells = <2>;
|
|
};
|
|
};
|
|
};
|