mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 00:47:11 +07:00
d5aa84087e
Porter needs the regulator quirk, just like the other boards. But unlike the other boards, the Porter uses DA9063L, which is at 0x5a. Otherwise, DA9063L and DA9210 IRQ line is still connected to CPU IRQ2 . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
232 lines
5.8 KiB
C
232 lines
5.8 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* R-Car Generation 2 da9063(L)/da9210 regulator quirk
|
|
*
|
|
* Certain Gen2 development boards have an da9063 and one or more da9210
|
|
* regulators. All of these regulators have their interrupt request lines
|
|
* tied to the same interrupt pin (IRQ2) on the SoC.
|
|
*
|
|
* After cold boot or da9063-induced restart, both the da9063 and da9210 seem
|
|
* to assert their interrupt request lines. Hence as soon as one driver
|
|
* requests this irq, it gets stuck in an interrupt storm, as it only manages
|
|
* to deassert its own interrupt request line, and the other driver hasn't
|
|
* installed an interrupt handler yet.
|
|
*
|
|
* To handle this, install a quirk that masks the interrupts in both the
|
|
* da9063 and da9210. This quirk has to run after the i2c master driver has
|
|
* been initialized, but before the i2c slave drivers are initialized.
|
|
*
|
|
* Copyright (C) 2015 Glider bvba
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/list.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/mfd/da9063/registers.h>
|
|
|
|
#define IRQC_BASE 0xe61c0000
|
|
#define IRQC_MONITOR 0x104 /* IRQn Signal Level Monitor Register */
|
|
|
|
#define REGULATOR_IRQ_MASK BIT(2) /* IRQ2, active low */
|
|
|
|
/* start of DA9210 System Control and Event Registers */
|
|
#define DA9210_REG_MASK_A 0x54
|
|
|
|
struct regulator_quirk {
|
|
struct list_head list;
|
|
const struct of_device_id *id;
|
|
struct device_node *np;
|
|
struct of_phandle_args irq_args;
|
|
struct i2c_msg i2c_msg;
|
|
bool shared; /* IRQ line is shared */
|
|
};
|
|
|
|
static LIST_HEAD(quirk_list);
|
|
static void __iomem *irqc;
|
|
|
|
/* first byte sets the memory pointer, following are consecutive reg values */
|
|
static u8 da9063_irq_clr[] = { DA9063_REG_IRQ_MASK_A, 0xff, 0xff, 0xff, 0xff };
|
|
static u8 da9210_irq_clr[] = { DA9210_REG_MASK_A, 0xff, 0xff };
|
|
|
|
static struct i2c_msg da9063_msg = {
|
|
.len = ARRAY_SIZE(da9063_irq_clr),
|
|
.buf = da9063_irq_clr,
|
|
};
|
|
|
|
static struct i2c_msg da9210_msg = {
|
|
.len = ARRAY_SIZE(da9210_irq_clr),
|
|
.buf = da9210_irq_clr,
|
|
};
|
|
|
|
static const struct of_device_id rcar_gen2_quirk_match[] = {
|
|
{ .compatible = "dlg,da9063", .data = &da9063_msg },
|
|
{ .compatible = "dlg,da9063l", .data = &da9063_msg },
|
|
{ .compatible = "dlg,da9210", .data = &da9210_msg },
|
|
{},
|
|
};
|
|
|
|
static int regulator_quirk_notify(struct notifier_block *nb,
|
|
unsigned long action, void *data)
|
|
{
|
|
struct regulator_quirk *pos, *tmp;
|
|
struct device *dev = data;
|
|
struct i2c_client *client;
|
|
static bool done;
|
|
int ret;
|
|
u32 mon;
|
|
|
|
if (done)
|
|
return 0;
|
|
|
|
mon = ioread32(irqc + IRQC_MONITOR);
|
|
dev_dbg(dev, "%s: %ld, IRQC_MONITOR = 0x%x\n", __func__, action, mon);
|
|
if (mon & REGULATOR_IRQ_MASK)
|
|
goto remove;
|
|
|
|
if (action != BUS_NOTIFY_ADD_DEVICE || dev->type == &i2c_adapter_type)
|
|
return 0;
|
|
|
|
client = to_i2c_client(dev);
|
|
dev_dbg(dev, "Detected %s\n", client->name);
|
|
|
|
/*
|
|
* Send message to all PMICs that share an IRQ line to deassert it.
|
|
*
|
|
* WARNING: This works only if all the PMICs are on the same I2C bus.
|
|
*/
|
|
list_for_each_entry(pos, &quirk_list, list) {
|
|
if (!pos->shared)
|
|
continue;
|
|
|
|
if (pos->np->parent != client->dev.parent->of_node)
|
|
continue;
|
|
|
|
dev_info(&client->dev, "clearing %s@0x%02x interrupts\n",
|
|
pos->id->compatible, pos->i2c_msg.addr);
|
|
|
|
ret = i2c_transfer(client->adapter, &pos->i2c_msg, 1);
|
|
if (ret != 1)
|
|
dev_err(&client->dev, "i2c error %d\n", ret);
|
|
}
|
|
|
|
mon = ioread32(irqc + IRQC_MONITOR);
|
|
if (mon & REGULATOR_IRQ_MASK)
|
|
goto remove;
|
|
|
|
return 0;
|
|
|
|
remove:
|
|
dev_info(dev, "IRQ2 is not asserted, removing quirk\n");
|
|
|
|
list_for_each_entry_safe(pos, tmp, &quirk_list, list) {
|
|
list_del(&pos->list);
|
|
kfree(pos);
|
|
}
|
|
|
|
done = true;
|
|
iounmap(irqc);
|
|
return 0;
|
|
}
|
|
|
|
static struct notifier_block regulator_quirk_nb = {
|
|
.notifier_call = regulator_quirk_notify
|
|
};
|
|
|
|
static int __init rcar_gen2_regulator_quirk(void)
|
|
{
|
|
struct regulator_quirk *quirk, *pos, *tmp;
|
|
struct of_phandle_args *argsa, *argsb;
|
|
const struct of_device_id *id;
|
|
struct device_node *np;
|
|
u32 mon, addr;
|
|
int ret;
|
|
|
|
if (!of_machine_is_compatible("renesas,koelsch") &&
|
|
!of_machine_is_compatible("renesas,lager") &&
|
|
!of_machine_is_compatible("renesas,porter") &&
|
|
!of_machine_is_compatible("renesas,stout") &&
|
|
!of_machine_is_compatible("renesas,gose"))
|
|
return -ENODEV;
|
|
|
|
for_each_matching_node_and_match(np, rcar_gen2_quirk_match, &id) {
|
|
if (!of_device_is_available(np))
|
|
break;
|
|
|
|
ret = of_property_read_u32(np, "reg", &addr);
|
|
if (ret) /* Skip invalid entry and continue */
|
|
continue;
|
|
|
|
quirk = kzalloc(sizeof(*quirk), GFP_KERNEL);
|
|
if (!quirk) {
|
|
ret = -ENOMEM;
|
|
goto err_mem;
|
|
}
|
|
|
|
argsa = &quirk->irq_args;
|
|
memcpy(&quirk->i2c_msg, id->data, sizeof(quirk->i2c_msg));
|
|
|
|
quirk->id = id;
|
|
quirk->np = np;
|
|
quirk->i2c_msg.addr = addr;
|
|
|
|
ret = of_irq_parse_one(np, 0, argsa);
|
|
if (ret) { /* Skip invalid entry and continue */
|
|
kfree(quirk);
|
|
continue;
|
|
}
|
|
|
|
list_for_each_entry(pos, &quirk_list, list) {
|
|
argsb = &pos->irq_args;
|
|
|
|
if (argsa->args_count != argsb->args_count)
|
|
continue;
|
|
|
|
ret = memcmp(argsa->args, argsb->args,
|
|
argsa->args_count *
|
|
sizeof(argsa->args[0]));
|
|
if (!ret) {
|
|
pos->shared = true;
|
|
quirk->shared = true;
|
|
}
|
|
}
|
|
|
|
list_add_tail(&quirk->list, &quirk_list);
|
|
}
|
|
|
|
irqc = ioremap(IRQC_BASE, PAGE_SIZE);
|
|
if (!irqc) {
|
|
ret = -ENOMEM;
|
|
goto err_mem;
|
|
}
|
|
|
|
mon = ioread32(irqc + IRQC_MONITOR);
|
|
if (mon & REGULATOR_IRQ_MASK) {
|
|
pr_debug("%s: IRQ2 is not asserted, not installing quirk\n",
|
|
__func__);
|
|
ret = 0;
|
|
goto err_free;
|
|
}
|
|
|
|
pr_info("IRQ2 is asserted, installing regulator quirk\n");
|
|
|
|
bus_register_notifier(&i2c_bus_type, ®ulator_quirk_nb);
|
|
return 0;
|
|
|
|
err_free:
|
|
iounmap(irqc);
|
|
err_mem:
|
|
list_for_each_entry_safe(pos, tmp, &quirk_list, list) {
|
|
list_del(&pos->list);
|
|
kfree(pos);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
arch_initcall(rcar_gen2_regulator_quirk);
|