linux_dsm_epyc7002/drivers/gpu/drm/i915/display/intel_psr.c
Gwan-gyeong Mun 7a00e68b43 drm/i915/psr: Use new DP VSC SDP compute routine on PSR
In order to use a common VSC SDP Colorimetry calculating code on PSR,
it uses a new psr vsc sdp compute routine.
Because PSR routine has its own scenario and timings of writing a VSC SDP,
the current PSR routine needs to have its own drm_dp_vsc_sdp structure
member variable on struct i915_psr.

In order to calculate colorimetry information, intel_psr_update()
function and intel_psr_enable() function extend a drm_connector_state
argument.

There are no changes to PSR mechanism.

v3: Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp
v4: Rebased
v8: Rebased
v10: When a PSR is enabled, it needs to add DP_SDP_VSC to
     infoframes.enable.
     It is needed for comparing between HW and pipe_state of VSC_SDP.
v11: If PSR is disabled by flag, it don't enable psr on pipe compute.
v12: Fix an inconsistent indenting

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-15-gwan-gyeong.mun@intel.com
2020-05-14 13:54:17 +03:00

1647 lines
48 KiB
C

/*
* Copyright © 2014 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*/
#include <drm/drm_atomic_helper.h>
#include "display/intel_dp.h"
#include "i915_drv.h"
#include "intel_atomic.h"
#include "intel_display_types.h"
#include "intel_psr.h"
#include "intel_sprite.h"
#include "intel_hdmi.h"
/**
* DOC: Panel Self Refresh (PSR/SRD)
*
* Since Haswell Display controller supports Panel Self-Refresh on display
* panels witch have a remote frame buffer (RFB) implemented according to PSR
* spec in eDP1.3. PSR feature allows the display to go to lower standby states
* when system is idle but display is on as it eliminates display refresh
* request to DDR memory completely as long as the frame buffer for that
* display is unchanged.
*
* Panel Self Refresh must be supported by both Hardware (source) and
* Panel (sink).
*
* PSR saves power by caching the framebuffer in the panel RFB, which allows us
* to power down the link and memory controller. For DSI panels the same idea
* is called "manual mode".
*
* The implementation uses the hardware-based PSR support which automatically
* enters/exits self-refresh mode. The hardware takes care of sending the
* required DP aux message and could even retrain the link (that part isn't
* enabled yet though). The hardware also keeps track of any frontbuffer
* changes to know when to exit self-refresh mode again. Unfortunately that
* part doesn't work too well, hence why the i915 PSR support uses the
* software frontbuffer tracking to make sure it doesn't miss a screen
* update. For this integration intel_psr_invalidate() and intel_psr_flush()
* get called by the frontbuffer tracking code. Note that because of locking
* issues the self-refresh re-enable code is done from a work queue, which
* must be correctly synchronized/cancelled when shutting down the pipe."
*
* DC3CO (DC3 clock off)
*
* On top of PSR2, GEN12 adds a intermediate power savings state that turns
* clock off automatically during PSR2 idle state.
* The smaller overhead of DC3co entry/exit vs. the overhead of PSR2 deep sleep
* entry/exit allows the HW to enter a low-power state even when page flipping
* periodically (for instance a 30fps video playback scenario).
*
* Every time a flips occurs PSR2 will get out of deep sleep state(if it was),
* so DC3CO is enabled and tgl_dc3co_disable_work is schedule to run after 6
* frames, if no other flip occurs and the function above is executed, DC3CO is
* disabled and PSR2 is configured to enter deep sleep, resetting again in case
* of another flip.
* Front buffer modifications do not trigger DC3CO activation on purpose as it
* would bring a lot of complexity and most of the moderns systems will only
* use page flips.
*/
static bool psr_global_enabled(struct drm_i915_private *i915)
{
switch (i915->psr.debug & I915_PSR_DEBUG_MODE_MASK) {
case I915_PSR_DEBUG_DEFAULT:
return i915_modparams.enable_psr;
case I915_PSR_DEBUG_DISABLE:
return false;
default:
return true;
}
}
static bool intel_psr2_enabled(struct drm_i915_private *dev_priv,
const struct intel_crtc_state *crtc_state)
{
/* Cannot enable DSC and PSR2 simultaneously */
drm_WARN_ON(&dev_priv->drm, crtc_state->dsc.compression_enable &&
crtc_state->has_psr2);
switch (dev_priv->psr.debug & I915_PSR_DEBUG_MODE_MASK) {
case I915_PSR_DEBUG_DISABLE:
case I915_PSR_DEBUG_FORCE_PSR1:
return false;
default:
return crtc_state->has_psr2;
}
}
static void psr_irq_control(struct drm_i915_private *dev_priv)
{
enum transcoder trans_shift;
u32 mask, val;
i915_reg_t imr_reg;
/*
* gen12+ has registers relative to transcoder and one per transcoder
* using the same bit definition: handle it as TRANSCODER_EDP to force
* 0 shift in bit definition
*/
if (INTEL_GEN(dev_priv) >= 12) {
trans_shift = 0;
imr_reg = TRANS_PSR_IMR(dev_priv->psr.transcoder);
} else {
trans_shift = dev_priv->psr.transcoder;
imr_reg = EDP_PSR_IMR;
}
mask = EDP_PSR_ERROR(trans_shift);
if (dev_priv->psr.debug & I915_PSR_DEBUG_IRQ)
mask |= EDP_PSR_POST_EXIT(trans_shift) |
EDP_PSR_PRE_ENTRY(trans_shift);
/* Warning: it is masking/setting reserved bits too */
val = intel_de_read(dev_priv, imr_reg);
val &= ~EDP_PSR_TRANS_MASK(trans_shift);
val |= ~mask;
intel_de_write(dev_priv, imr_reg, val);
}
static void psr_event_print(struct drm_i915_private *i915,
u32 val, bool psr2_enabled)
{
drm_dbg_kms(&i915->drm, "PSR exit events: 0x%x\n", val);
if (val & PSR_EVENT_PSR2_WD_TIMER_EXPIRE)
drm_dbg_kms(&i915->drm, "\tPSR2 watchdog timer expired\n");
if ((val & PSR_EVENT_PSR2_DISABLED) && psr2_enabled)
drm_dbg_kms(&i915->drm, "\tPSR2 disabled\n");
if (val & PSR_EVENT_SU_DIRTY_FIFO_UNDERRUN)
drm_dbg_kms(&i915->drm, "\tSU dirty FIFO underrun\n");
if (val & PSR_EVENT_SU_CRC_FIFO_UNDERRUN)
drm_dbg_kms(&i915->drm, "\tSU CRC FIFO underrun\n");
if (val & PSR_EVENT_GRAPHICS_RESET)
drm_dbg_kms(&i915->drm, "\tGraphics reset\n");
if (val & PSR_EVENT_PCH_INTERRUPT)
drm_dbg_kms(&i915->drm, "\tPCH interrupt\n");
if (val & PSR_EVENT_MEMORY_UP)
drm_dbg_kms(&i915->drm, "\tMemory up\n");
if (val & PSR_EVENT_FRONT_BUFFER_MODIFY)
drm_dbg_kms(&i915->drm, "\tFront buffer modification\n");
if (val & PSR_EVENT_WD_TIMER_EXPIRE)
drm_dbg_kms(&i915->drm, "\tPSR watchdog timer expired\n");
if (val & PSR_EVENT_PIPE_REGISTERS_UPDATE)
drm_dbg_kms(&i915->drm, "\tPIPE registers updated\n");
if (val & PSR_EVENT_REGISTER_UPDATE)
drm_dbg_kms(&i915->drm, "\tRegister updated\n");
if (val & PSR_EVENT_HDCP_ENABLE)
drm_dbg_kms(&i915->drm, "\tHDCP enabled\n");
if (val & PSR_EVENT_KVMR_SESSION_ENABLE)
drm_dbg_kms(&i915->drm, "\tKVMR session enabled\n");
if (val & PSR_EVENT_VBI_ENABLE)
drm_dbg_kms(&i915->drm, "\tVBI enabled\n");
if (val & PSR_EVENT_LPSP_MODE_EXIT)
drm_dbg_kms(&i915->drm, "\tLPSP mode exited\n");
if ((val & PSR_EVENT_PSR_DISABLE) && !psr2_enabled)
drm_dbg_kms(&i915->drm, "\tPSR disabled\n");
}
void intel_psr_irq_handler(struct drm_i915_private *dev_priv, u32 psr_iir)
{
enum transcoder cpu_transcoder = dev_priv->psr.transcoder;
enum transcoder trans_shift;
i915_reg_t imr_reg;
ktime_t time_ns = ktime_get();
if (INTEL_GEN(dev_priv) >= 12) {
trans_shift = 0;
imr_reg = TRANS_PSR_IMR(dev_priv->psr.transcoder);
} else {
trans_shift = dev_priv->psr.transcoder;
imr_reg = EDP_PSR_IMR;
}
if (psr_iir & EDP_PSR_PRE_ENTRY(trans_shift)) {
dev_priv->psr.last_entry_attempt = time_ns;
drm_dbg_kms(&dev_priv->drm,
"[transcoder %s] PSR entry attempt in 2 vblanks\n",
transcoder_name(cpu_transcoder));
}
if (psr_iir & EDP_PSR_POST_EXIT(trans_shift)) {
dev_priv->psr.last_exit = time_ns;
drm_dbg_kms(&dev_priv->drm,
"[transcoder %s] PSR exit completed\n",
transcoder_name(cpu_transcoder));
if (INTEL_GEN(dev_priv) >= 9) {
u32 val = intel_de_read(dev_priv,
PSR_EVENT(cpu_transcoder));
bool psr2_enabled = dev_priv->psr.psr2_enabled;
intel_de_write(dev_priv, PSR_EVENT(cpu_transcoder),
val);
psr_event_print(dev_priv, val, psr2_enabled);
}
}
if (psr_iir & EDP_PSR_ERROR(trans_shift)) {
u32 val;
drm_warn(&dev_priv->drm, "[transcoder %s] PSR aux error\n",
transcoder_name(cpu_transcoder));
dev_priv->psr.irq_aux_error = true;
/*
* If this interruption is not masked it will keep
* interrupting so fast that it prevents the scheduled
* work to run.
* Also after a PSR error, we don't want to arm PSR
* again so we don't care about unmask the interruption
* or unset irq_aux_error.
*/
val = intel_de_read(dev_priv, imr_reg);
val |= EDP_PSR_ERROR(trans_shift);
intel_de_write(dev_priv, imr_reg, val);
schedule_work(&dev_priv->psr.work);
}
}
static bool intel_dp_get_alpm_status(struct intel_dp *intel_dp)
{
u8 alpm_caps = 0;
if (drm_dp_dpcd_readb(&intel_dp->aux, DP_RECEIVER_ALPM_CAP,
&alpm_caps) != 1)
return false;
return alpm_caps & DP_ALPM_CAP;
}
static u8 intel_dp_get_sink_sync_latency(struct intel_dp *intel_dp)
{
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
u8 val = 8; /* assume the worst if we can't read the value */
if (drm_dp_dpcd_readb(&intel_dp->aux,
DP_SYNCHRONIZATION_LATENCY_IN_SINK, &val) == 1)
val &= DP_MAX_RESYNC_FRAME_COUNT_MASK;
else
drm_dbg_kms(&i915->drm,
"Unable to get sink synchronization latency, assuming 8 frames\n");
return val;
}
static u16 intel_dp_get_su_x_granulartiy(struct intel_dp *intel_dp)
{
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
u16 val;
ssize_t r;
/*
* Returning the default X granularity if granularity not required or
* if DPCD read fails
*/
if (!(intel_dp->psr_dpcd[1] & DP_PSR2_SU_GRANULARITY_REQUIRED))
return 4;
r = drm_dp_dpcd_read(&intel_dp->aux, DP_PSR2_SU_X_GRANULARITY, &val, 2);
if (r != 2)
drm_dbg_kms(&i915->drm,
"Unable to read DP_PSR2_SU_X_GRANULARITY\n");
/*
* Spec says that if the value read is 0 the default granularity should
* be used instead.
*/
if (r != 2 || val == 0)
val = 4;
return val;
}
void intel_psr_init_dpcd(struct intel_dp *intel_dp)
{
struct drm_i915_private *dev_priv =
to_i915(dp_to_dig_port(intel_dp)->base.base.dev);
if (dev_priv->psr.dp) {
drm_warn(&dev_priv->drm,
"More than one eDP panel found, PSR support should be extended\n");
return;
}
drm_dp_dpcd_read(&intel_dp->aux, DP_PSR_SUPPORT, intel_dp->psr_dpcd,
sizeof(intel_dp->psr_dpcd));
if (!intel_dp->psr_dpcd[0])
return;
drm_dbg_kms(&dev_priv->drm, "eDP panel supports PSR version %x\n",
intel_dp->psr_dpcd[0]);
if (drm_dp_has_quirk(&intel_dp->desc, 0, DP_DPCD_QUIRK_NO_PSR)) {
drm_dbg_kms(&dev_priv->drm,
"PSR support not currently available for this panel\n");
return;
}
if (!(intel_dp->edp_dpcd[1] & DP_EDP_SET_POWER_CAP)) {
drm_dbg_kms(&dev_priv->drm,
"Panel lacks power state control, PSR cannot be enabled\n");
return;
}
dev_priv->psr.sink_support = true;
dev_priv->psr.sink_sync_latency =
intel_dp_get_sink_sync_latency(intel_dp);
dev_priv->psr.dp = intel_dp;
if (INTEL_GEN(dev_priv) >= 9 &&
(intel_dp->psr_dpcd[0] == DP_PSR2_WITH_Y_COORD_IS_SUPPORTED)) {
bool y_req = intel_dp->psr_dpcd[1] &
DP_PSR2_SU_Y_COORDINATE_REQUIRED;
bool alpm = intel_dp_get_alpm_status(intel_dp);
/*
* All panels that supports PSR version 03h (PSR2 +
* Y-coordinate) can handle Y-coordinates in VSC but we are
* only sure that it is going to be used when required by the
* panel. This way panel is capable to do selective update
* without a aux frame sync.
*
* To support PSR version 02h and PSR version 03h without
* Y-coordinate requirement panels we would need to enable
* GTC first.
*/
dev_priv->psr.sink_psr2_support = y_req && alpm;
drm_dbg_kms(&dev_priv->drm, "PSR2 %ssupported\n",
dev_priv->psr.sink_psr2_support ? "" : "not ");
if (dev_priv->psr.sink_psr2_support) {
dev_priv->psr.colorimetry_support =
intel_dp_get_colorimetry_status(intel_dp);
dev_priv->psr.su_x_granularity =
intel_dp_get_su_x_granulartiy(intel_dp);
}
}
}
static void hsw_psr_setup_aux(struct intel_dp *intel_dp)
{
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
u32 aux_clock_divider, aux_ctl;
int i;
static const u8 aux_msg[] = {
[0] = DP_AUX_NATIVE_WRITE << 4,
[1] = DP_SET_POWER >> 8,
[2] = DP_SET_POWER & 0xff,
[3] = 1 - 1,
[4] = DP_SET_POWER_D0,
};
u32 psr_aux_mask = EDP_PSR_AUX_CTL_TIME_OUT_MASK |
EDP_PSR_AUX_CTL_MESSAGE_SIZE_MASK |
EDP_PSR_AUX_CTL_PRECHARGE_2US_MASK |
EDP_PSR_AUX_CTL_BIT_CLOCK_2X_MASK;
BUILD_BUG_ON(sizeof(aux_msg) > 20);
for (i = 0; i < sizeof(aux_msg); i += 4)
intel_de_write(dev_priv,
EDP_PSR_AUX_DATA(dev_priv->psr.transcoder, i >> 2),
intel_dp_pack_aux(&aux_msg[i], sizeof(aux_msg) - i));
aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, 0);
/* Start with bits set for DDI_AUX_CTL register */
aux_ctl = intel_dp->get_aux_send_ctl(intel_dp, sizeof(aux_msg),
aux_clock_divider);
/* Select only valid bits for SRD_AUX_CTL */
aux_ctl &= psr_aux_mask;
intel_de_write(dev_priv, EDP_PSR_AUX_CTL(dev_priv->psr.transcoder),
aux_ctl);
}
static void intel_psr_enable_sink(struct intel_dp *intel_dp)
{
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
u8 dpcd_val = DP_PSR_ENABLE;
/* Enable ALPM at sink for psr2 */
if (dev_priv->psr.psr2_enabled) {
drm_dp_dpcd_writeb(&intel_dp->aux, DP_RECEIVER_ALPM_CONFIG,
DP_ALPM_ENABLE |
DP_ALPM_LOCK_ERROR_IRQ_HPD_ENABLE);
dpcd_val |= DP_PSR_ENABLE_PSR2 | DP_PSR_IRQ_HPD_WITH_CRC_ERRORS;
} else {
if (dev_priv->psr.link_standby)
dpcd_val |= DP_PSR_MAIN_LINK_ACTIVE;
if (INTEL_GEN(dev_priv) >= 8)
dpcd_val |= DP_PSR_CRC_VERIFICATION;
}
drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, dpcd_val);
drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, DP_SET_POWER_D0);
}
static u32 intel_psr1_get_tp_time(struct intel_dp *intel_dp)
{
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
u32 val = 0;
if (INTEL_GEN(dev_priv) >= 11)
val |= EDP_PSR_TP4_TIME_0US;
if (dev_priv->vbt.psr.tp1_wakeup_time_us == 0)
val |= EDP_PSR_TP1_TIME_0us;
else if (dev_priv->vbt.psr.tp1_wakeup_time_us <= 100)
val |= EDP_PSR_TP1_TIME_100us;
else if (dev_priv->vbt.psr.tp1_wakeup_time_us <= 500)
val |= EDP_PSR_TP1_TIME_500us;
else
val |= EDP_PSR_TP1_TIME_2500us;
if (dev_priv->vbt.psr.tp2_tp3_wakeup_time_us == 0)
val |= EDP_PSR_TP2_TP3_TIME_0us;
else if (dev_priv->vbt.psr.tp2_tp3_wakeup_time_us <= 100)
val |= EDP_PSR_TP2_TP3_TIME_100us;
else if (dev_priv->vbt.psr.tp2_tp3_wakeup_time_us <= 500)
val |= EDP_PSR_TP2_TP3_TIME_500us;
else
val |= EDP_PSR_TP2_TP3_TIME_2500us;
if (intel_dp_source_supports_hbr2(intel_dp) &&
drm_dp_tps3_supported(intel_dp->dpcd))
val |= EDP_PSR_TP1_TP3_SEL;
else
val |= EDP_PSR_TP1_TP2_SEL;
return val;
}
static u8 psr_compute_idle_frames(struct intel_dp *intel_dp)
{
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
int idle_frames;
/* Let's use 6 as the minimum to cover all known cases including the
* off-by-one issue that HW has in some cases.
*/
idle_frames = max(6, dev_priv->vbt.psr.idle_frames);
idle_frames = max(idle_frames, dev_priv->psr.sink_sync_latency + 1);
if (drm_WARN_ON(&dev_priv->drm, idle_frames > 0xf))
idle_frames = 0xf;
return idle_frames;
}
static void hsw_activate_psr1(struct intel_dp *intel_dp)
{
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
u32 max_sleep_time = 0x1f;
u32 val = EDP_PSR_ENABLE;
val |= psr_compute_idle_frames(intel_dp) << EDP_PSR_IDLE_FRAME_SHIFT;
val |= max_sleep_time << EDP_PSR_MAX_SLEEP_TIME_SHIFT;
if (IS_HASWELL(dev_priv))
val |= EDP_PSR_MIN_LINK_ENTRY_TIME_8_LINES;
if (dev_priv->psr.link_standby)
val |= EDP_PSR_LINK_STANDBY;
val |= intel_psr1_get_tp_time(intel_dp);
if (INTEL_GEN(dev_priv) >= 8)
val |= EDP_PSR_CRC_ENABLE;
val |= (intel_de_read(dev_priv, EDP_PSR_CTL(dev_priv->psr.transcoder)) &
EDP_PSR_RESTORE_PSR_ACTIVE_CTX_MASK);
intel_de_write(dev_priv, EDP_PSR_CTL(dev_priv->psr.transcoder), val);
}
static void hsw_activate_psr2(struct intel_dp *intel_dp)
{
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
u32 val;
val = psr_compute_idle_frames(intel_dp) << EDP_PSR2_IDLE_FRAME_SHIFT;
val |= EDP_PSR2_ENABLE | EDP_SU_TRACK_ENABLE;
if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
val |= EDP_Y_COORDINATE_ENABLE;
val |= EDP_PSR2_FRAME_BEFORE_SU(dev_priv->psr.sink_sync_latency + 1);
if (dev_priv->vbt.psr.psr2_tp2_tp3_wakeup_time_us >= 0 &&
dev_priv->vbt.psr.psr2_tp2_tp3_wakeup_time_us <= 50)
val |= EDP_PSR2_TP2_TIME_50us;
else if (dev_priv->vbt.psr.psr2_tp2_tp3_wakeup_time_us <= 100)
val |= EDP_PSR2_TP2_TIME_100us;
else if (dev_priv->vbt.psr.psr2_tp2_tp3_wakeup_time_us <= 500)
val |= EDP_PSR2_TP2_TIME_500us;
else
val |= EDP_PSR2_TP2_TIME_2500us;
/*
* PSR2 HW is incorrectly using EDP_PSR_TP1_TP3_SEL and BSpec is
* recommending keep this bit unset while PSR2 is enabled.
*/
intel_de_write(dev_priv, EDP_PSR_CTL(dev_priv->psr.transcoder), 0);
intel_de_write(dev_priv, EDP_PSR2_CTL(dev_priv->psr.transcoder), val);
}
static bool
transcoder_has_psr2(struct drm_i915_private *dev_priv, enum transcoder trans)
{
if (INTEL_GEN(dev_priv) < 9)
return false;
else if (INTEL_GEN(dev_priv) >= 12)
return trans == TRANSCODER_A;
else
return trans == TRANSCODER_EDP;
}
static u32 intel_get_frame_time_us(const struct intel_crtc_state *cstate)
{
if (!cstate || !cstate->hw.active)
return 0;
return DIV_ROUND_UP(1000 * 1000,
drm_mode_vrefresh(&cstate->hw.adjusted_mode));
}
static void psr2_program_idle_frames(struct drm_i915_private *dev_priv,
u32 idle_frames)
{
u32 val;
idle_frames <<= EDP_PSR2_IDLE_FRAME_SHIFT;
val = intel_de_read(dev_priv, EDP_PSR2_CTL(dev_priv->psr.transcoder));
val &= ~EDP_PSR2_IDLE_FRAME_MASK;
val |= idle_frames;
intel_de_write(dev_priv, EDP_PSR2_CTL(dev_priv->psr.transcoder), val);
}
static void tgl_psr2_enable_dc3co(struct drm_i915_private *dev_priv)
{
psr2_program_idle_frames(dev_priv, 0);
intel_display_power_set_target_dc_state(dev_priv, DC_STATE_EN_DC3CO);
}
static void tgl_psr2_disable_dc3co(struct drm_i915_private *dev_priv)
{
struct intel_dp *intel_dp = dev_priv->psr.dp;
intel_display_power_set_target_dc_state(dev_priv, DC_STATE_EN_UPTO_DC6);
psr2_program_idle_frames(dev_priv, psr_compute_idle_frames(intel_dp));
}
static void tgl_dc3co_disable_work(struct work_struct *work)
{
struct drm_i915_private *dev_priv =
container_of(work, typeof(*dev_priv), psr.dc3co_work.work);
mutex_lock(&dev_priv->psr.lock);
/* If delayed work is pending, it is not idle */
if (delayed_work_pending(&dev_priv->psr.dc3co_work))
goto unlock;
tgl_psr2_disable_dc3co(dev_priv);
unlock:
mutex_unlock(&dev_priv->psr.lock);
}
static void tgl_disallow_dc3co_on_psr2_exit(struct drm_i915_private *dev_priv)
{
if (!dev_priv->psr.dc3co_enabled)
return;
cancel_delayed_work(&dev_priv->psr.dc3co_work);
/* Before PSR2 exit disallow dc3co*/
tgl_psr2_disable_dc3co(dev_priv);
}
static void
tgl_dc3co_exitline_compute_config(struct intel_dp *intel_dp,
struct intel_crtc_state *crtc_state)
{
const u32 crtc_vdisplay = crtc_state->uapi.adjusted_mode.crtc_vdisplay;
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
u32 exit_scanlines;
if (!(dev_priv->csr.allowed_dc_mask & DC_STATE_EN_DC3CO))
return;
/* B.Specs:49196 DC3CO only works with pipeA and DDIA.*/
if (to_intel_crtc(crtc_state->uapi.crtc)->pipe != PIPE_A ||
dig_port->base.port != PORT_A)
return;
/*
* DC3CO Exit time 200us B.Spec 49196
* PSR2 transcoder Early Exit scanlines = ROUNDUP(200 / line time) + 1
*/
exit_scanlines =
intel_usecs_to_scanlines(&crtc_state->uapi.adjusted_mode, 200) + 1;
if (drm_WARN_ON(&dev_priv->drm, exit_scanlines > crtc_vdisplay))
return;
crtc_state->dc3co_exitline = crtc_vdisplay - exit_scanlines;
}
static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
int crtc_hdisplay = crtc_state->hw.adjusted_mode.crtc_hdisplay;
int crtc_vdisplay = crtc_state->hw.adjusted_mode.crtc_vdisplay;
int psr_max_h = 0, psr_max_v = 0, max_bpp = 0;
if (!dev_priv->psr.sink_psr2_support)
return false;
if (!transcoder_has_psr2(dev_priv, crtc_state->cpu_transcoder)) {
drm_dbg_kms(&dev_priv->drm,
"PSR2 not supported in transcoder %s\n",
transcoder_name(crtc_state->cpu_transcoder));
return false;
}
/*
* DSC and PSR2 cannot be enabled simultaneously. If a requested
* resolution requires DSC to be enabled, priority is given to DSC
* over PSR2.
*/
if (crtc_state->dsc.compression_enable) {
drm_dbg_kms(&dev_priv->drm,
"PSR2 cannot be enabled since DSC is enabled\n");
return false;
}
if (INTEL_GEN(dev_priv) >= 12) {
psr_max_h = 5120;
psr_max_v = 3200;
max_bpp = 30;
} else if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) {
psr_max_h = 4096;
psr_max_v = 2304;
max_bpp = 24;
} else if (IS_GEN(dev_priv, 9)) {
psr_max_h = 3640;
psr_max_v = 2304;
max_bpp = 24;
}
if (crtc_hdisplay > psr_max_h || crtc_vdisplay > psr_max_v) {
drm_dbg_kms(&dev_priv->drm,
"PSR2 not enabled, resolution %dx%d > max supported %dx%d\n",
crtc_hdisplay, crtc_vdisplay,
psr_max_h, psr_max_v);
return false;
}
if (crtc_state->pipe_bpp > max_bpp) {
drm_dbg_kms(&dev_priv->drm,
"PSR2 not enabled, pipe bpp %d > max supported %d\n",
crtc_state->pipe_bpp, max_bpp);
return false;
}
/*
* HW sends SU blocks of size four scan lines, which means the starting
* X coordinate and Y granularity requirements will always be met. We
* only need to validate the SU block width is a multiple of
* x granularity.
*/
if (crtc_hdisplay % dev_priv->psr.su_x_granularity) {
drm_dbg_kms(&dev_priv->drm,
"PSR2 not enabled, hdisplay(%d) not multiple of %d\n",
crtc_hdisplay, dev_priv->psr.su_x_granularity);
return false;
}
if (crtc_state->crc_enabled) {
drm_dbg_kms(&dev_priv->drm,
"PSR2 not enabled because it would inhibit pipe CRC calculation\n");
return false;
}
tgl_dc3co_exitline_compute_config(intel_dp, crtc_state);
return true;
}
void intel_psr_compute_config(struct intel_dp *intel_dp,
struct intel_crtc_state *crtc_state)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
const struct drm_display_mode *adjusted_mode =
&crtc_state->hw.adjusted_mode;
int psr_setup_time;
if (!CAN_PSR(dev_priv))
return;
if (intel_dp != dev_priv->psr.dp)
return;
if (!psr_global_enabled(dev_priv))
return;
/*
* HSW spec explicitly says PSR is tied to port A.
* BDW+ platforms have a instance of PSR registers per transcoder but
* for now it only supports one instance of PSR, so lets keep it
* hardcoded to PORT_A
*/
if (dig_port->base.port != PORT_A) {
drm_dbg_kms(&dev_priv->drm,
"PSR condition failed: Port not supported\n");
return;
}
if (dev_priv->psr.sink_not_reliable) {
drm_dbg_kms(&dev_priv->drm,
"PSR sink implementation is not reliable\n");
return;
}
if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
drm_dbg_kms(&dev_priv->drm,
"PSR condition failed: Interlaced mode enabled\n");
return;
}
psr_setup_time = drm_dp_psr_setup_time(intel_dp->psr_dpcd);
if (psr_setup_time < 0) {
drm_dbg_kms(&dev_priv->drm,
"PSR condition failed: Invalid PSR setup time (0x%02x)\n",
intel_dp->psr_dpcd[1]);
return;
}
if (intel_usecs_to_scanlines(adjusted_mode, psr_setup_time) >
adjusted_mode->crtc_vtotal - adjusted_mode->crtc_vdisplay - 1) {
drm_dbg_kms(&dev_priv->drm,
"PSR condition failed: PSR setup time (%d us) too long\n",
psr_setup_time);
return;
}
crtc_state->has_psr = true;
crtc_state->has_psr2 = intel_psr2_config_valid(intel_dp, crtc_state);
crtc_state->infoframes.enable |= intel_hdmi_infoframe_enable(DP_SDP_VSC);
}
static void intel_psr_activate(struct intel_dp *intel_dp)
{
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
if (transcoder_has_psr2(dev_priv, dev_priv->psr.transcoder))
drm_WARN_ON(&dev_priv->drm,
intel_de_read(dev_priv, EDP_PSR2_CTL(dev_priv->psr.transcoder)) & EDP_PSR2_ENABLE);
drm_WARN_ON(&dev_priv->drm,
intel_de_read(dev_priv, EDP_PSR_CTL(dev_priv->psr.transcoder)) & EDP_PSR_ENABLE);
drm_WARN_ON(&dev_priv->drm, dev_priv->psr.active);
lockdep_assert_held(&dev_priv->psr.lock);
/* psr1 and psr2 are mutually exclusive.*/
if (dev_priv->psr.psr2_enabled)
hsw_activate_psr2(intel_dp);
else
hsw_activate_psr1(intel_dp);
dev_priv->psr.active = true;
}
static void intel_psr_enable_source(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
u32 mask;
/* Only HSW and BDW have PSR AUX registers that need to be setup. SKL+
* use hardcoded values PSR AUX transactions
*/
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
hsw_psr_setup_aux(intel_dp);
if (dev_priv->psr.psr2_enabled && (IS_GEN(dev_priv, 9) &&
!IS_GEMINILAKE(dev_priv))) {
i915_reg_t reg = CHICKEN_TRANS(cpu_transcoder);
u32 chicken = intel_de_read(dev_priv, reg);
chicken |= PSR2_VSC_ENABLE_PROG_HEADER |
PSR2_ADD_VERTICAL_LINE_COUNT;
intel_de_write(dev_priv, reg, chicken);
}
/*
* Per Spec: Avoid continuous PSR exit by masking MEMUP and HPD also
* mask LPSP to avoid dependency on other drivers that might block
* runtime_pm besides preventing other hw tracking issues now we
* can rely on frontbuffer tracking.
*/
mask = EDP_PSR_DEBUG_MASK_MEMUP |
EDP_PSR_DEBUG_MASK_HPD |
EDP_PSR_DEBUG_MASK_LPSP |
EDP_PSR_DEBUG_MASK_MAX_SLEEP;
if (INTEL_GEN(dev_priv) < 11)
mask |= EDP_PSR_DEBUG_MASK_DISP_REG_WRITE;
intel_de_write(dev_priv, EDP_PSR_DEBUG(dev_priv->psr.transcoder),
mask);
psr_irq_control(dev_priv);
if (crtc_state->dc3co_exitline) {
u32 val;
/*
* TODO: if future platforms supports DC3CO in more than one
* transcoder, EXITLINE will need to be unset when disabling PSR
*/
val = intel_de_read(dev_priv, EXITLINE(cpu_transcoder));
val &= ~EXITLINE_MASK;
val |= crtc_state->dc3co_exitline << EXITLINE_SHIFT;
val |= EXITLINE_ENABLE;
intel_de_write(dev_priv, EXITLINE(cpu_transcoder), val);
}
}
static void intel_psr_enable_locked(struct drm_i915_private *dev_priv,
const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state)
{
struct intel_dp *intel_dp = dev_priv->psr.dp;
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct intel_encoder *encoder = &intel_dig_port->base;
u32 val;
drm_WARN_ON(&dev_priv->drm, dev_priv->psr.enabled);
dev_priv->psr.psr2_enabled = intel_psr2_enabled(dev_priv, crtc_state);
dev_priv->psr.busy_frontbuffer_bits = 0;
dev_priv->psr.pipe = to_intel_crtc(crtc_state->uapi.crtc)->pipe;
dev_priv->psr.dc3co_enabled = !!crtc_state->dc3co_exitline;
dev_priv->psr.transcoder = crtc_state->cpu_transcoder;
/* DC5/DC6 requires at least 6 idle frames */
val = usecs_to_jiffies(intel_get_frame_time_us(crtc_state) * 6);
dev_priv->psr.dc3co_exit_delay = val;
/*
* If a PSR error happened and the driver is reloaded, the EDP_PSR_IIR
* will still keep the error set even after the reset done in the
* irq_preinstall and irq_uninstall hooks.
* And enabling in this situation cause the screen to freeze in the
* first time that PSR HW tries to activate so lets keep PSR disabled
* to avoid any rendering problems.
*/
if (INTEL_GEN(dev_priv) >= 12) {
val = intel_de_read(dev_priv,
TRANS_PSR_IIR(dev_priv->psr.transcoder));
val &= EDP_PSR_ERROR(0);
} else {
val = intel_de_read(dev_priv, EDP_PSR_IIR);
val &= EDP_PSR_ERROR(dev_priv->psr.transcoder);
}
if (val) {
dev_priv->psr.sink_not_reliable = true;
drm_dbg_kms(&dev_priv->drm,
"PSR interruption error set, not enabling PSR\n");
return;
}
drm_dbg_kms(&dev_priv->drm, "Enabling PSR%s\n",
dev_priv->psr.psr2_enabled ? "2" : "1");
intel_dp_compute_psr_vsc_sdp(intel_dp, crtc_state, conn_state,
&dev_priv->psr.vsc);
intel_write_dp_vsc_sdp(encoder, crtc_state, &dev_priv->psr.vsc);
intel_psr_enable_sink(intel_dp);
intel_psr_enable_source(intel_dp, crtc_state);
dev_priv->psr.enabled = true;
intel_psr_activate(intel_dp);
}
/**
* intel_psr_enable - Enable PSR
* @intel_dp: Intel DP
* @crtc_state: new CRTC state
* @conn_state: new CONNECTOR state
*
* This function can only be called after the pipe is fully trained and enabled.
*/
void intel_psr_enable(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state)
{
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
if (!CAN_PSR(dev_priv) || dev_priv->psr.dp != intel_dp)
return;
dev_priv->psr.force_mode_changed = false;
if (!crtc_state->has_psr)
return;
drm_WARN_ON(&dev_priv->drm, dev_priv->drrs.dp);
mutex_lock(&dev_priv->psr.lock);
if (!psr_global_enabled(dev_priv)) {
drm_dbg_kms(&dev_priv->drm, "PSR disabled by flag\n");
goto unlock;
}
intel_psr_enable_locked(dev_priv, crtc_state, conn_state);
unlock:
mutex_unlock(&dev_priv->psr.lock);
}
static void intel_psr_exit(struct drm_i915_private *dev_priv)
{
u32 val;
if (!dev_priv->psr.active) {
if (transcoder_has_psr2(dev_priv, dev_priv->psr.transcoder)) {
val = intel_de_read(dev_priv,
EDP_PSR2_CTL(dev_priv->psr.transcoder));
drm_WARN_ON(&dev_priv->drm, val & EDP_PSR2_ENABLE);
}
val = intel_de_read(dev_priv,
EDP_PSR_CTL(dev_priv->psr.transcoder));
drm_WARN_ON(&dev_priv->drm, val & EDP_PSR_ENABLE);
return;
}
if (dev_priv->psr.psr2_enabled) {
tgl_disallow_dc3co_on_psr2_exit(dev_priv);
val = intel_de_read(dev_priv,
EDP_PSR2_CTL(dev_priv->psr.transcoder));
drm_WARN_ON(&dev_priv->drm, !(val & EDP_PSR2_ENABLE));
val &= ~EDP_PSR2_ENABLE;
intel_de_write(dev_priv,
EDP_PSR2_CTL(dev_priv->psr.transcoder), val);
} else {
val = intel_de_read(dev_priv,
EDP_PSR_CTL(dev_priv->psr.transcoder));
drm_WARN_ON(&dev_priv->drm, !(val & EDP_PSR_ENABLE));
val &= ~EDP_PSR_ENABLE;
intel_de_write(dev_priv,
EDP_PSR_CTL(dev_priv->psr.transcoder), val);
}
dev_priv->psr.active = false;
}
static void intel_psr_disable_locked(struct intel_dp *intel_dp)
{
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
i915_reg_t psr_status;
u32 psr_status_mask;
lockdep_assert_held(&dev_priv->psr.lock);
if (!dev_priv->psr.enabled)
return;
drm_dbg_kms(&dev_priv->drm, "Disabling PSR%s\n",
dev_priv->psr.psr2_enabled ? "2" : "1");
intel_psr_exit(dev_priv);
if (dev_priv->psr.psr2_enabled) {
psr_status = EDP_PSR2_STATUS(dev_priv->psr.transcoder);
psr_status_mask = EDP_PSR2_STATUS_STATE_MASK;
} else {
psr_status = EDP_PSR_STATUS(dev_priv->psr.transcoder);
psr_status_mask = EDP_PSR_STATUS_STATE_MASK;
}
/* Wait till PSR is idle */
if (intel_de_wait_for_clear(dev_priv, psr_status,
psr_status_mask, 2000))
drm_err(&dev_priv->drm, "Timed out waiting PSR idle state\n");
/* Disable PSR on Sink */
drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, 0);
if (dev_priv->psr.psr2_enabled)
drm_dp_dpcd_writeb(&intel_dp->aux, DP_RECEIVER_ALPM_CONFIG, 0);
dev_priv->psr.enabled = false;
}
/**
* intel_psr_disable - Disable PSR
* @intel_dp: Intel DP
* @old_crtc_state: old CRTC state
*
* This function needs to be called before disabling pipe.
*/
void intel_psr_disable(struct intel_dp *intel_dp,
const struct intel_crtc_state *old_crtc_state)
{
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
if (!old_crtc_state->has_psr)
return;
if (drm_WARN_ON(&dev_priv->drm, !CAN_PSR(dev_priv)))
return;
mutex_lock(&dev_priv->psr.lock);
intel_psr_disable_locked(intel_dp);
mutex_unlock(&dev_priv->psr.lock);
cancel_work_sync(&dev_priv->psr.work);
cancel_delayed_work_sync(&dev_priv->psr.dc3co_work);
}
static void psr_force_hw_tracking_exit(struct drm_i915_private *dev_priv)
{
if (INTEL_GEN(dev_priv) >= 9)
/*
* Display WA #0884: skl+
* This documented WA for bxt can be safely applied
* broadly so we can force HW tracking to exit PSR
* instead of disabling and re-enabling.
* Workaround tells us to write 0 to CUR_SURFLIVE_A,
* but it makes more sense write to the current active
* pipe.
*/
intel_de_write(dev_priv, CURSURFLIVE(dev_priv->psr.pipe), 0);
else
/*
* A write to CURSURFLIVE do not cause HW tracking to exit PSR
* on older gens so doing the manual exit instead.
*/
intel_psr_exit(dev_priv);
}
/**
* intel_psr_update - Update PSR state
* @intel_dp: Intel DP
* @crtc_state: new CRTC state
* @conn_state: new CONNECTOR state
*
* This functions will update PSR states, disabling, enabling or switching PSR
* version when executing fastsets. For full modeset, intel_psr_disable() and
* intel_psr_enable() should be called instead.
*/
void intel_psr_update(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state)
{
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
struct i915_psr *psr = &dev_priv->psr;
bool enable, psr2_enable;
if (!CAN_PSR(dev_priv) || READ_ONCE(psr->dp) != intel_dp)
return;
dev_priv->psr.force_mode_changed = false;
mutex_lock(&dev_priv->psr.lock);
enable = crtc_state->has_psr && psr_global_enabled(dev_priv);
psr2_enable = intel_psr2_enabled(dev_priv, crtc_state);
if (enable == psr->enabled && psr2_enable == psr->psr2_enabled) {
/* Force a PSR exit when enabling CRC to avoid CRC timeouts */
if (crtc_state->crc_enabled && psr->enabled)
psr_force_hw_tracking_exit(dev_priv);
else if (INTEL_GEN(dev_priv) < 9 && psr->enabled) {
/*
* Activate PSR again after a force exit when enabling
* CRC in older gens
*/
if (!dev_priv->psr.active &&
!dev_priv->psr.busy_frontbuffer_bits)
schedule_work(&dev_priv->psr.work);
}
goto unlock;
}
if (psr->enabled)
intel_psr_disable_locked(intel_dp);
if (enable)
intel_psr_enable_locked(dev_priv, crtc_state, conn_state);
unlock:
mutex_unlock(&dev_priv->psr.lock);
}
/**
* intel_psr_wait_for_idle - wait for PSR1 to idle
* @new_crtc_state: new CRTC state
* @out_value: PSR status in case of failure
*
* This function is expected to be called from pipe_update_start() where it is
* not expected to race with PSR enable or disable.
*
* Returns: 0 on success or -ETIMEOUT if PSR status does not idle.
*/
int intel_psr_wait_for_idle(const struct intel_crtc_state *new_crtc_state,
u32 *out_value)
{
struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
if (!dev_priv->psr.enabled || !new_crtc_state->has_psr)
return 0;
/* FIXME: Update this for PSR2 if we need to wait for idle */
if (READ_ONCE(dev_priv->psr.psr2_enabled))
return 0;
/*
* From bspec: Panel Self Refresh (BDW+)
* Max. time for PSR to idle = Inverse of the refresh rate + 6 ms of
* exit training time + 1.5 ms of aux channel handshake. 50 ms is
* defensive enough to cover everything.
*/
return __intel_wait_for_register(&dev_priv->uncore,
EDP_PSR_STATUS(dev_priv->psr.transcoder),
EDP_PSR_STATUS_STATE_MASK,
EDP_PSR_STATUS_STATE_IDLE, 2, 50,
out_value);
}
static bool __psr_wait_for_idle_locked(struct drm_i915_private *dev_priv)
{
i915_reg_t reg;
u32 mask;
int err;
if (!dev_priv->psr.enabled)
return false;
if (dev_priv->psr.psr2_enabled) {
reg = EDP_PSR2_STATUS(dev_priv->psr.transcoder);
mask = EDP_PSR2_STATUS_STATE_MASK;
} else {
reg = EDP_PSR_STATUS(dev_priv->psr.transcoder);
mask = EDP_PSR_STATUS_STATE_MASK;
}
mutex_unlock(&dev_priv->psr.lock);
err = intel_de_wait_for_clear(dev_priv, reg, mask, 50);
if (err)
drm_err(&dev_priv->drm,
"Timed out waiting for PSR Idle for re-enable\n");
/* After the unlocked wait, verify that PSR is still wanted! */
mutex_lock(&dev_priv->psr.lock);
return err == 0 && dev_priv->psr.enabled;
}
static int intel_psr_fastset_force(struct drm_i915_private *dev_priv)
{
struct drm_device *dev = &dev_priv->drm;
struct drm_modeset_acquire_ctx ctx;
struct drm_atomic_state *state;
struct intel_crtc *crtc;
int err;
state = drm_atomic_state_alloc(dev);
if (!state)
return -ENOMEM;
drm_modeset_acquire_init(&ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE);
state->acquire_ctx = &ctx;
retry:
for_each_intel_crtc(dev, crtc) {
struct intel_crtc_state *crtc_state =
intel_atomic_get_crtc_state(state, crtc);
if (IS_ERR(crtc_state)) {
err = PTR_ERR(crtc_state);
goto error;
}
if (crtc_state->hw.active && crtc_state->has_psr) {
/* Mark mode as changed to trigger a pipe->update() */
crtc_state->uapi.mode_changed = true;
break;
}
}
err = drm_atomic_commit(state);
error:
if (err == -EDEADLK) {
drm_atomic_state_clear(state);
err = drm_modeset_backoff(&ctx);
if (!err)
goto retry;
}
drm_modeset_drop_locks(&ctx);
drm_modeset_acquire_fini(&ctx);
drm_atomic_state_put(state);
return err;
}
int intel_psr_debug_set(struct drm_i915_private *dev_priv, u64 val)
{
const u32 mode = val & I915_PSR_DEBUG_MODE_MASK;
u32 old_mode;
int ret;
if (val & ~(I915_PSR_DEBUG_IRQ | I915_PSR_DEBUG_MODE_MASK) ||
mode > I915_PSR_DEBUG_FORCE_PSR1) {
drm_dbg_kms(&dev_priv->drm, "Invalid debug mask %llx\n", val);
return -EINVAL;
}
ret = mutex_lock_interruptible(&dev_priv->psr.lock);
if (ret)
return ret;
old_mode = dev_priv->psr.debug & I915_PSR_DEBUG_MODE_MASK;
dev_priv->psr.debug = val;
/*
* Do it right away if it's already enabled, otherwise it will be done
* when enabling the source.
*/
if (dev_priv->psr.enabled)
psr_irq_control(dev_priv);
mutex_unlock(&dev_priv->psr.lock);
if (old_mode != mode)
ret = intel_psr_fastset_force(dev_priv);
return ret;
}
static void intel_psr_handle_irq(struct drm_i915_private *dev_priv)
{
struct i915_psr *psr = &dev_priv->psr;
intel_psr_disable_locked(psr->dp);
psr->sink_not_reliable = true;
/* let's make sure that sink is awaken */
drm_dp_dpcd_writeb(&psr->dp->aux, DP_SET_POWER, DP_SET_POWER_D0);
}
static void intel_psr_work(struct work_struct *work)
{
struct drm_i915_private *dev_priv =
container_of(work, typeof(*dev_priv), psr.work);
mutex_lock(&dev_priv->psr.lock);
if (!dev_priv->psr.enabled)
goto unlock;
if (READ_ONCE(dev_priv->psr.irq_aux_error))
intel_psr_handle_irq(dev_priv);
/*
* We have to make sure PSR is ready for re-enable
* otherwise it keeps disabled until next full enable/disable cycle.
* PSR might take some time to get fully disabled
* and be ready for re-enable.
*/
if (!__psr_wait_for_idle_locked(dev_priv))
goto unlock;
/*
* The delayed work can race with an invalidate hence we need to
* recheck. Since psr_flush first clears this and then reschedules we
* won't ever miss a flush when bailing out here.
*/
if (dev_priv->psr.busy_frontbuffer_bits || dev_priv->psr.active)
goto unlock;
intel_psr_activate(dev_priv->psr.dp);
unlock:
mutex_unlock(&dev_priv->psr.lock);
}
/**
* intel_psr_invalidate - Invalidade PSR
* @dev_priv: i915 device
* @frontbuffer_bits: frontbuffer plane tracking bits
* @origin: which operation caused the invalidate
*
* Since the hardware frontbuffer tracking has gaps we need to integrate
* with the software frontbuffer tracking. This function gets called every
* time frontbuffer rendering starts and a buffer gets dirtied. PSR must be
* disabled if the frontbuffer mask contains a buffer relevant to PSR.
*
* Dirty frontbuffers relevant to PSR are tracked in busy_frontbuffer_bits."
*/
void intel_psr_invalidate(struct drm_i915_private *dev_priv,
unsigned frontbuffer_bits, enum fb_op_origin origin)
{
if (!CAN_PSR(dev_priv))
return;
if (origin == ORIGIN_FLIP)
return;
mutex_lock(&dev_priv->psr.lock);
if (!dev_priv->psr.enabled) {
mutex_unlock(&dev_priv->psr.lock);
return;
}
frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(dev_priv->psr.pipe);
dev_priv->psr.busy_frontbuffer_bits |= frontbuffer_bits;
if (frontbuffer_bits)
intel_psr_exit(dev_priv);
mutex_unlock(&dev_priv->psr.lock);
}
/*
* When we will be completely rely on PSR2 S/W tracking in future,
* intel_psr_flush() will invalidate and flush the PSR for ORIGIN_FLIP
* event also therefore tgl_dc3co_flush() require to be changed
* accordingly in future.
*/
static void
tgl_dc3co_flush(struct drm_i915_private *dev_priv,
unsigned int frontbuffer_bits, enum fb_op_origin origin)
{
mutex_lock(&dev_priv->psr.lock);
if (!dev_priv->psr.dc3co_enabled)
goto unlock;
if (!dev_priv->psr.psr2_enabled || !dev_priv->psr.active)
goto unlock;
/*
* At every frontbuffer flush flip event modified delay of delayed work,
* when delayed work schedules that means display has been idle.
*/
if (!(frontbuffer_bits &
INTEL_FRONTBUFFER_ALL_MASK(dev_priv->psr.pipe)))
goto unlock;
tgl_psr2_enable_dc3co(dev_priv);
mod_delayed_work(system_wq, &dev_priv->psr.dc3co_work,
dev_priv->psr.dc3co_exit_delay);
unlock:
mutex_unlock(&dev_priv->psr.lock);
}
/**
* intel_psr_flush - Flush PSR
* @dev_priv: i915 device
* @frontbuffer_bits: frontbuffer plane tracking bits
* @origin: which operation caused the flush
*
* Since the hardware frontbuffer tracking has gaps we need to integrate
* with the software frontbuffer tracking. This function gets called every
* time frontbuffer rendering has completed and flushed out to memory. PSR
* can be enabled again if no other frontbuffer relevant to PSR is dirty.
*
* Dirty frontbuffers relevant to PSR are tracked in busy_frontbuffer_bits.
*/
void intel_psr_flush(struct drm_i915_private *dev_priv,
unsigned frontbuffer_bits, enum fb_op_origin origin)
{
if (!CAN_PSR(dev_priv))
return;
if (origin == ORIGIN_FLIP) {
tgl_dc3co_flush(dev_priv, frontbuffer_bits, origin);
return;
}
mutex_lock(&dev_priv->psr.lock);
if (!dev_priv->psr.enabled) {
mutex_unlock(&dev_priv->psr.lock);
return;
}
frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(dev_priv->psr.pipe);
dev_priv->psr.busy_frontbuffer_bits &= ~frontbuffer_bits;
/* By definition flush = invalidate + flush */
if (frontbuffer_bits)
psr_force_hw_tracking_exit(dev_priv);
if (!dev_priv->psr.active && !dev_priv->psr.busy_frontbuffer_bits)
schedule_work(&dev_priv->psr.work);
mutex_unlock(&dev_priv->psr.lock);
}
/**
* intel_psr_init - Init basic PSR work and mutex.
* @dev_priv: i915 device private
*
* This function is called only once at driver load to initialize basic
* PSR stuff.
*/
void intel_psr_init(struct drm_i915_private *dev_priv)
{
if (!HAS_PSR(dev_priv))
return;
if (!dev_priv->psr.sink_support)
return;
if (IS_HASWELL(dev_priv))
/*
* HSW don't have PSR registers on the same space as transcoder
* so set this to a value that when subtract to the register
* in transcoder space results in the right offset for HSW
*/
dev_priv->hsw_psr_mmio_adjust = _SRD_CTL_EDP - _HSW_EDP_PSR_BASE;
if (i915_modparams.enable_psr == -1)
if (INTEL_GEN(dev_priv) < 9 || !dev_priv->vbt.psr.enable)
i915_modparams.enable_psr = 0;
/* Set link_standby x link_off defaults */
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
/* HSW and BDW require workarounds that we don't implement. */
dev_priv->psr.link_standby = false;
else if (INTEL_GEN(dev_priv) < 12)
/* For new platforms up to TGL let's respect VBT back again */
dev_priv->psr.link_standby = dev_priv->vbt.psr.full_link;
INIT_WORK(&dev_priv->psr.work, intel_psr_work);
INIT_DELAYED_WORK(&dev_priv->psr.dc3co_work, tgl_dc3co_disable_work);
mutex_init(&dev_priv->psr.lock);
}
static int psr_get_status_and_error_status(struct intel_dp *intel_dp,
u8 *status, u8 *error_status)
{
struct drm_dp_aux *aux = &intel_dp->aux;
int ret;
ret = drm_dp_dpcd_readb(aux, DP_PSR_STATUS, status);
if (ret != 1)
return ret;
ret = drm_dp_dpcd_readb(aux, DP_PSR_ERROR_STATUS, error_status);
if (ret != 1)
return ret;
*status = *status & DP_PSR_SINK_STATE_MASK;
return 0;
}
static void psr_alpm_check(struct intel_dp *intel_dp)
{
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
struct drm_dp_aux *aux = &intel_dp->aux;
struct i915_psr *psr = &dev_priv->psr;
u8 val;
int r;
if (!psr->psr2_enabled)
return;
r = drm_dp_dpcd_readb(aux, DP_RECEIVER_ALPM_STATUS, &val);
if (r != 1) {
drm_err(&dev_priv->drm, "Error reading ALPM status\n");
return;
}
if (val & DP_ALPM_LOCK_TIMEOUT_ERROR) {
intel_psr_disable_locked(intel_dp);
psr->sink_not_reliable = true;
drm_dbg_kms(&dev_priv->drm,
"ALPM lock timeout error, disabling PSR\n");
/* Clearing error */
drm_dp_dpcd_writeb(aux, DP_RECEIVER_ALPM_STATUS, val);
}
}
static void psr_capability_changed_check(struct intel_dp *intel_dp)
{
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
struct i915_psr *psr = &dev_priv->psr;
u8 val;
int r;
r = drm_dp_dpcd_readb(&intel_dp->aux, DP_PSR_ESI, &val);
if (r != 1) {
drm_err(&dev_priv->drm, "Error reading DP_PSR_ESI\n");
return;
}
if (val & DP_PSR_CAPS_CHANGE) {
intel_psr_disable_locked(intel_dp);
psr->sink_not_reliable = true;
drm_dbg_kms(&dev_priv->drm,
"Sink PSR capability changed, disabling PSR\n");
/* Clearing it */
drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_ESI, val);
}
}
void intel_psr_short_pulse(struct intel_dp *intel_dp)
{
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
struct i915_psr *psr = &dev_priv->psr;
u8 status, error_status;
const u8 errors = DP_PSR_RFB_STORAGE_ERROR |
DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR |
DP_PSR_LINK_CRC_ERROR;
if (!CAN_PSR(dev_priv) || !intel_dp_is_edp(intel_dp))
return;
mutex_lock(&psr->lock);
if (!psr->enabled || psr->dp != intel_dp)
goto exit;
if (psr_get_status_and_error_status(intel_dp, &status, &error_status)) {
drm_err(&dev_priv->drm,
"Error reading PSR status or error status\n");
goto exit;
}
if (status == DP_PSR_SINK_INTERNAL_ERROR || (error_status & errors)) {
intel_psr_disable_locked(intel_dp);
psr->sink_not_reliable = true;
}
if (status == DP_PSR_SINK_INTERNAL_ERROR && !error_status)
drm_dbg_kms(&dev_priv->drm,
"PSR sink internal error, disabling PSR\n");
if (error_status & DP_PSR_RFB_STORAGE_ERROR)
drm_dbg_kms(&dev_priv->drm,
"PSR RFB storage error, disabling PSR\n");
if (error_status & DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR)
drm_dbg_kms(&dev_priv->drm,
"PSR VSC SDP uncorrectable error, disabling PSR\n");
if (error_status & DP_PSR_LINK_CRC_ERROR)
drm_dbg_kms(&dev_priv->drm,
"PSR Link CRC error, disabling PSR\n");
if (error_status & ~errors)
drm_err(&dev_priv->drm,
"PSR_ERROR_STATUS unhandled errors %x\n",
error_status & ~errors);
/* clear status register */
drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_ERROR_STATUS, error_status);
psr_alpm_check(intel_dp);
psr_capability_changed_check(intel_dp);
exit:
mutex_unlock(&psr->lock);
}
bool intel_psr_enabled(struct intel_dp *intel_dp)
{
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
bool ret;
if (!CAN_PSR(dev_priv) || !intel_dp_is_edp(intel_dp))
return false;
mutex_lock(&dev_priv->psr.lock);
ret = (dev_priv->psr.dp == intel_dp && dev_priv->psr.enabled);
mutex_unlock(&dev_priv->psr.lock);
return ret;
}
void intel_psr_atomic_check(struct drm_connector *connector,
struct drm_connector_state *old_state,
struct drm_connector_state *new_state)
{
struct drm_i915_private *dev_priv = to_i915(connector->dev);
struct intel_connector *intel_connector;
struct intel_digital_port *dig_port;
struct drm_crtc_state *crtc_state;
if (!CAN_PSR(dev_priv) || !new_state->crtc ||
!dev_priv->psr.force_mode_changed)
return;
intel_connector = to_intel_connector(connector);
dig_port = enc_to_dig_port(intel_attached_encoder(intel_connector));
if (dev_priv->psr.dp != &dig_port->dp)
return;
crtc_state = drm_atomic_get_new_crtc_state(new_state->state,
new_state->crtc);
crtc_state->mode_changed = true;
}
void intel_psr_set_force_mode_changed(struct intel_dp *intel_dp)
{
struct drm_i915_private *dev_priv;
if (!intel_dp)
return;
dev_priv = dp_to_i915(intel_dp);
if (!CAN_PSR(dev_priv) || intel_dp != dev_priv->psr.dp)
return;
dev_priv->psr.force_mode_changed = true;
}