mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-24 14:29:32 +07:00
b8e2931d16
1) Why add the subpage read support? The page size of the nand chip becomes larger and larger, the imx6 has to supports the 16K page or even bigger page. But sometimes, the upper layer only needs a small part of the page, such as 512 bytes or less. For example, ubiattach may only read 64 bytes per page. 2) We only enable the subpage read support when it meets the conditions: <1> the chip is imx6 (or later chips) which can supports large nand page. <2> the size of ECC parity is byte aligned. If the size of ECC parity is not byte aligned, the calling of NAND_CMD_RNDOUT will fail. 3) What does this patch do? This patch will fake a virtual small page for the subpage read, and call the gpmi_ecc_read_page() to do the real work. In order to fake a virtual small page, the patch changes the BCH registers and the bch_geometry{}. After the subpage read finished, we will restore them back. 4) Performace: 4.1) Tested with Toshiba TC58NVG2S0F(4096 + 224) with the following command: #ubiattach /dev/ubi_ctrl -m 4 The detail information of /dev/mtd4 shows below: -------------------------------------------------------------- #mtdinfo /dev/mtd4 mtd4 Name: test Type: nand Eraseblock size: 262144 bytes, 256.0 KiB Amount of eraseblocks: 1856 (486539264 bytes, 464.0 MiB) Minimum input/output unit size: 4096 bytes Sub-page size: 4096 bytes OOB size: 224 bytes Character device major/minor: 90:8 Bad blocks are allowed: true Device is writable: true -------------------------------------------------------------- 4.2) Before this patch: -------------------------------------------------------------- [ 94.530495] UBI: attaching mtd4 to ubi0 [ 98.928850] UBI: scanning is finished [ 98.953594] UBI: attached mtd4 (name "test", size 464 MiB) to ubi0 [ 98.958562] UBI: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 98.964076] UBI: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 98.969518] UBI: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 98.975128] UBI: good PEBs: 1856, bad PEBs: 0, corrupted PEBs: 0 [ 98.979843] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 98.985878] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 2024916145 [ 98.993635] UBI: available PEBs: 0, total reserved PEBs: 1856, PEBs reserved for bad PEB handling: 40 [ 99.001807] UBI: background thread "ubi_bgt0d" started, PID 831 -------------------------------------------------------------- The attach time is about 98.9 - 94.5 = 4.4s 4.3) After this patch: -------------------------------------------------------------- [ 286.464906] UBI: attaching mtd4 to ubi0 [ 289.186129] UBI: scanning is finished [ 289.211416] UBI: attached mtd4 (name "test", size 464 MiB) to ubi0 [ 289.216360] UBI: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 289.221858] UBI: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 289.227293] UBI: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 289.232878] UBI: good PEBs: 1856, bad PEBs: 0, corrupted PEBs: 0 [ 289.237628] UBI: user volume: 0, internal volumes: 1, max. volumes count: 128 [ 289.243553] UBI: max/mean erase counter: 1/1, WL threshold: 4096, image sequence number: 2024916145 [ 289.251348] UBI: available PEBs: 1812, total reserved PEBs: 44, PEBs reserved for bad PEB handling: 40 [ 289.259417] UBI: background thread "ubi_bgt0d" started, PID 847 -------------------------------------------------------------- The attach time is about 289.18 - 286.46 = 2.7s 4.4) The conclusion: We achieve (4.4 - 2.7) / 4.4 = 38.6% faster in the ubiattach. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> |
||
---|---|---|
.. | ||
bch-regs.h | ||
gpmi-lib.c | ||
gpmi-nand.c | ||
gpmi-nand.h | ||
gpmi-regs.h | ||
Makefile |