mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-25 04:11:44 +07:00
c9d79c4bbb
The drivers/mtd/nand/gpio.c driver does not GPIO bitbang the complete NAND protocol, but instead is GPIO _assisted_ -- a memory mapped interface communicates commands and data, and only few control signals are connected to GPIO pins. Expand comments in the driver source and in the Kconfig description to better reflect the very nature of the driver. The previous text could be mistaken for complete GPIO bitbanging. Signed-off-by: Gerhard Sittig <gsi@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
323 lines
7.8 KiB
C
323 lines
7.8 KiB
C
/*
|
|
* drivers/mtd/nand/gpio.c
|
|
*
|
|
* Updated, and converted to generic GPIO based driver by Russell King.
|
|
*
|
|
* Written by Ben Dooks <ben@simtec.co.uk>
|
|
* Based on 2.4 version by Mark Whittaker
|
|
*
|
|
* © 2004 Simtec Electronics
|
|
*
|
|
* Device driver for NAND flash that uses a memory mapped interface to
|
|
* read/write the NAND commands and data, and GPIO pins for control signals
|
|
* (the DT binding refers to this as "GPIO assisted NAND flash")
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/err.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/io.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/mtd/nand-gpio.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_gpio.h>
|
|
|
|
struct gpiomtd {
|
|
void __iomem *io_sync;
|
|
struct mtd_info mtd_info;
|
|
struct nand_chip nand_chip;
|
|
struct gpio_nand_platdata plat;
|
|
};
|
|
|
|
#define gpio_nand_getpriv(x) container_of(x, struct gpiomtd, mtd_info)
|
|
|
|
|
|
#ifdef CONFIG_ARM
|
|
/* gpio_nand_dosync()
|
|
*
|
|
* Make sure the GPIO state changes occur in-order with writes to NAND
|
|
* memory region.
|
|
* Needed on PXA due to bus-reordering within the SoC itself (see section on
|
|
* I/O ordering in PXA manual (section 2.3, p35)
|
|
*/
|
|
static void gpio_nand_dosync(struct gpiomtd *gpiomtd)
|
|
{
|
|
unsigned long tmp;
|
|
|
|
if (gpiomtd->io_sync) {
|
|
/*
|
|
* Linux memory barriers don't cater for what's required here.
|
|
* What's required is what's here - a read from a separate
|
|
* region with a dependency on that read.
|
|
*/
|
|
tmp = readl(gpiomtd->io_sync);
|
|
asm volatile("mov %1, %0\n" : "=r" (tmp) : "r" (tmp));
|
|
}
|
|
}
|
|
#else
|
|
static inline void gpio_nand_dosync(struct gpiomtd *gpiomtd) {}
|
|
#endif
|
|
|
|
static void gpio_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
|
|
{
|
|
struct gpiomtd *gpiomtd = gpio_nand_getpriv(mtd);
|
|
|
|
gpio_nand_dosync(gpiomtd);
|
|
|
|
if (ctrl & NAND_CTRL_CHANGE) {
|
|
gpio_set_value(gpiomtd->plat.gpio_nce, !(ctrl & NAND_NCE));
|
|
gpio_set_value(gpiomtd->plat.gpio_cle, !!(ctrl & NAND_CLE));
|
|
gpio_set_value(gpiomtd->plat.gpio_ale, !!(ctrl & NAND_ALE));
|
|
gpio_nand_dosync(gpiomtd);
|
|
}
|
|
if (cmd == NAND_CMD_NONE)
|
|
return;
|
|
|
|
writeb(cmd, gpiomtd->nand_chip.IO_ADDR_W);
|
|
gpio_nand_dosync(gpiomtd);
|
|
}
|
|
|
|
static int gpio_nand_devready(struct mtd_info *mtd)
|
|
{
|
|
struct gpiomtd *gpiomtd = gpio_nand_getpriv(mtd);
|
|
|
|
return gpio_get_value(gpiomtd->plat.gpio_rdy);
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id gpio_nand_id_table[] = {
|
|
{ .compatible = "gpio-control-nand" },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, gpio_nand_id_table);
|
|
|
|
static int gpio_nand_get_config_of(const struct device *dev,
|
|
struct gpio_nand_platdata *plat)
|
|
{
|
|
u32 val;
|
|
|
|
if (!dev->of_node)
|
|
return -ENODEV;
|
|
|
|
if (!of_property_read_u32(dev->of_node, "bank-width", &val)) {
|
|
if (val == 2) {
|
|
plat->options |= NAND_BUSWIDTH_16;
|
|
} else if (val != 1) {
|
|
dev_err(dev, "invalid bank-width %u\n", val);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
plat->gpio_rdy = of_get_gpio(dev->of_node, 0);
|
|
plat->gpio_nce = of_get_gpio(dev->of_node, 1);
|
|
plat->gpio_ale = of_get_gpio(dev->of_node, 2);
|
|
plat->gpio_cle = of_get_gpio(dev->of_node, 3);
|
|
plat->gpio_nwp = of_get_gpio(dev->of_node, 4);
|
|
|
|
if (!of_property_read_u32(dev->of_node, "chip-delay", &val))
|
|
plat->chip_delay = val;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct resource *gpio_nand_get_io_sync_of(struct platform_device *pdev)
|
|
{
|
|
struct resource *r;
|
|
u64 addr;
|
|
|
|
if (of_property_read_u64(pdev->dev.of_node,
|
|
"gpio-control-nand,io-sync-reg", &addr))
|
|
return NULL;
|
|
|
|
r = devm_kzalloc(&pdev->dev, sizeof(*r), GFP_KERNEL);
|
|
if (!r)
|
|
return NULL;
|
|
|
|
r->start = addr;
|
|
r->end = r->start + 0x3;
|
|
r->flags = IORESOURCE_MEM;
|
|
|
|
return r;
|
|
}
|
|
#else /* CONFIG_OF */
|
|
static inline int gpio_nand_get_config_of(const struct device *dev,
|
|
struct gpio_nand_platdata *plat)
|
|
{
|
|
return -ENOSYS;
|
|
}
|
|
|
|
static inline struct resource *
|
|
gpio_nand_get_io_sync_of(struct platform_device *pdev)
|
|
{
|
|
return NULL;
|
|
}
|
|
#endif /* CONFIG_OF */
|
|
|
|
static inline int gpio_nand_get_config(const struct device *dev,
|
|
struct gpio_nand_platdata *plat)
|
|
{
|
|
int ret = gpio_nand_get_config_of(dev, plat);
|
|
|
|
if (!ret)
|
|
return ret;
|
|
|
|
if (dev_get_platdata(dev)) {
|
|
memcpy(plat, dev_get_platdata(dev), sizeof(*plat));
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static inline struct resource *
|
|
gpio_nand_get_io_sync(struct platform_device *pdev)
|
|
{
|
|
struct resource *r = gpio_nand_get_io_sync_of(pdev);
|
|
|
|
if (r)
|
|
return r;
|
|
|
|
return platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
}
|
|
|
|
static int gpio_nand_remove(struct platform_device *pdev)
|
|
{
|
|
struct gpiomtd *gpiomtd = platform_get_drvdata(pdev);
|
|
|
|
nand_release(&gpiomtd->mtd_info);
|
|
|
|
if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
|
|
gpio_set_value(gpiomtd->plat.gpio_nwp, 0);
|
|
gpio_set_value(gpiomtd->plat.gpio_nce, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gpio_nand_probe(struct platform_device *pdev)
|
|
{
|
|
struct gpiomtd *gpiomtd;
|
|
struct nand_chip *chip;
|
|
struct resource *res;
|
|
struct mtd_part_parser_data ppdata = {};
|
|
int ret = 0;
|
|
|
|
if (!pdev->dev.of_node && !dev_get_platdata(&pdev->dev))
|
|
return -EINVAL;
|
|
|
|
gpiomtd = devm_kzalloc(&pdev->dev, sizeof(*gpiomtd), GFP_KERNEL);
|
|
if (!gpiomtd)
|
|
return -ENOMEM;
|
|
|
|
chip = &gpiomtd->nand_chip;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
chip->IO_ADDR_R = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(chip->IO_ADDR_R))
|
|
return PTR_ERR(chip->IO_ADDR_R);
|
|
|
|
res = gpio_nand_get_io_sync(pdev);
|
|
if (res) {
|
|
gpiomtd->io_sync = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(gpiomtd->io_sync))
|
|
return PTR_ERR(gpiomtd->io_sync);
|
|
}
|
|
|
|
ret = gpio_nand_get_config(&pdev->dev, &gpiomtd->plat);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_nce, "NAND NCE");
|
|
if (ret)
|
|
return ret;
|
|
gpio_direction_output(gpiomtd->plat.gpio_nce, 1);
|
|
|
|
if (gpio_is_valid(gpiomtd->plat.gpio_nwp)) {
|
|
ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_nwp,
|
|
"NAND NWP");
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_ale, "NAND ALE");
|
|
if (ret)
|
|
return ret;
|
|
gpio_direction_output(gpiomtd->plat.gpio_ale, 0);
|
|
|
|
ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_cle, "NAND CLE");
|
|
if (ret)
|
|
return ret;
|
|
gpio_direction_output(gpiomtd->plat.gpio_cle, 0);
|
|
|
|
if (gpio_is_valid(gpiomtd->plat.gpio_rdy)) {
|
|
ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_rdy,
|
|
"NAND RDY");
|
|
if (ret)
|
|
return ret;
|
|
gpio_direction_input(gpiomtd->plat.gpio_rdy);
|
|
chip->dev_ready = gpio_nand_devready;
|
|
}
|
|
|
|
chip->IO_ADDR_W = chip->IO_ADDR_R;
|
|
chip->ecc.mode = NAND_ECC_SOFT;
|
|
chip->options = gpiomtd->plat.options;
|
|
chip->chip_delay = gpiomtd->plat.chip_delay;
|
|
chip->cmd_ctrl = gpio_nand_cmd_ctrl;
|
|
|
|
gpiomtd->mtd_info.priv = chip;
|
|
gpiomtd->mtd_info.owner = THIS_MODULE;
|
|
|
|
platform_set_drvdata(pdev, gpiomtd);
|
|
|
|
if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
|
|
gpio_direction_output(gpiomtd->plat.gpio_nwp, 1);
|
|
|
|
if (nand_scan(&gpiomtd->mtd_info, 1)) {
|
|
ret = -ENXIO;
|
|
goto err_wp;
|
|
}
|
|
|
|
if (gpiomtd->plat.adjust_parts)
|
|
gpiomtd->plat.adjust_parts(&gpiomtd->plat,
|
|
gpiomtd->mtd_info.size);
|
|
|
|
ppdata.of_node = pdev->dev.of_node;
|
|
ret = mtd_device_parse_register(&gpiomtd->mtd_info, NULL, &ppdata,
|
|
gpiomtd->plat.parts,
|
|
gpiomtd->plat.num_parts);
|
|
if (!ret)
|
|
return 0;
|
|
|
|
err_wp:
|
|
if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
|
|
gpio_set_value(gpiomtd->plat.gpio_nwp, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct platform_driver gpio_nand_driver = {
|
|
.probe = gpio_nand_probe,
|
|
.remove = gpio_nand_remove,
|
|
.driver = {
|
|
.name = "gpio-nand",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = of_match_ptr(gpio_nand_id_table),
|
|
},
|
|
};
|
|
|
|
module_platform_driver(gpio_nand_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
|
|
MODULE_DESCRIPTION("GPIO NAND Driver");
|