AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-16 02:36:51 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
1da9a586a2
linux_dsm_epyc7002/drivers/net/hamradio/dmascc.c
Arnd Bergmann 9877e1058a hamradio: dmascc: avoid -Wformat-overflow warning 
gcc warns that the device name might overflow:

drivers/net/hamradio/dmascc.c: In function 'dmascc_init':
drivers/net/hamradio/dmascc.c:584:22: error: 'sprintf' may write a terminating nul past the end of the destination [-Werror=format-overflow=]
   sprintf(dev->name, "dmascc%i", 2 * n + i);
drivers/net/hamradio/dmascc.c:584:3: note: 'sprintf' output between 8 and 17 bytes into a destination of size 16
   sprintf(dev->name, "dmascc%i", 2 * n + i);

>From the static data in this file, I can tell that the index is
strictly limited to 16, so it won't overflow. This simply changes
the sprintf() to snprintf(), which is a good idea in general,
and shuts up this warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-26 09:32:44 -07:00

1466 lines
37 KiB
C
Raw Blame History

/*
* Driver for high-speed SCC boards (those with DMA support)
* Copyright (C) 1997-2000 Klaus Kudielka
*
* S5SCC/DMA support by Janko Koleznik S52HI
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/if_arp.h>
#include <linux/in.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/netdevice.h>
#include <linux/slab.h>
#include <linux/rtnetlink.h>
#include <linux/sockios.h>
#include <linux/workqueue.h>
#include <linux/atomic.h>
#include <asm/dma.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <linux/uaccess.h>
#include <net/ax25.h>
#include "z8530.h"
/* Number of buffers per channel */
#define NUM_TX_BUF 2 /* NUM_TX_BUF >= 1 (min. 2 recommended) */
#define NUM_RX_BUF 6 /* NUM_RX_BUF >= 1 (min. 2 recommended) */
#define BUF_SIZE 1576 /* BUF_SIZE >= mtu + hard_header_len */
/* Cards supported */
#define HW_PI { "Ottawa PI", 0x300, 0x20, 0x10, 8, \
0, 8, 1843200, 3686400 }
#define HW_PI2 { "Ottawa PI2", 0x300, 0x20, 0x10, 8, \
0, 8, 3686400, 7372800 }
#define HW_TWIN { "Gracilis PackeTwin", 0x200, 0x10, 0x10, 32, \
0, 4, 6144000, 6144000 }
#define HW_S5 { "S5SCC/DMA", 0x200, 0x10, 0x10, 32, \
0, 8, 4915200, 9830400 }
#define HARDWARE { HW_PI, HW_PI2, HW_TWIN, HW_S5 }
#define TMR_0_HZ 25600 /* Frequency of timer 0 */
#define TYPE_PI 0
#define TYPE_PI2 1
#define TYPE_TWIN 2
#define TYPE_S5 3
#define NUM_TYPES 4
#define MAX_NUM_DEVS 32
/* SCC chips supported */
#define Z8530 0
#define Z85C30 1
#define Z85230 2
#define CHIPNAMES { "Z8530", "Z85C30", "Z85230" }
/* I/O registers */
/* 8530 registers relative to card base */
#define SCCB_CMD 0x00
#define SCCB_DATA 0x01
#define SCCA_CMD 0x02
#define SCCA_DATA 0x03
/* 8253/8254 registers relative to card base */
#define TMR_CNT0 0x00
#define TMR_CNT1 0x01
#define TMR_CNT2 0x02
#define TMR_CTRL 0x03
/* Additional PI/PI2 registers relative to card base */
#define PI_DREQ_MASK 0x04
/* Additional PackeTwin registers relative to card base */
#define TWIN_INT_REG 0x08
#define TWIN_CLR_TMR1 0x09
#define TWIN_CLR_TMR2 0x0a
#define TWIN_SPARE_1 0x0b
#define TWIN_DMA_CFG 0x08
#define TWIN_SERIAL_CFG 0x09
#define TWIN_DMA_CLR_FF 0x0a
#define TWIN_SPARE_2 0x0b
/* PackeTwin I/O register values */
/* INT_REG */
#define TWIN_SCC_MSK 0x01
#define TWIN_TMR1_MSK 0x02
#define TWIN_TMR2_MSK 0x04
#define TWIN_INT_MSK 0x07
/* SERIAL_CFG */
#define TWIN_DTRA_ON 0x01
#define TWIN_DTRB_ON 0x02
#define TWIN_EXTCLKA 0x04
#define TWIN_EXTCLKB 0x08
#define TWIN_LOOPA_ON 0x10
#define TWIN_LOOPB_ON 0x20
#define TWIN_EI 0x80
/* DMA_CFG */
#define TWIN_DMA_HDX_T1 0x08
#define TWIN_DMA_HDX_R1 0x0a
#define TWIN_DMA_HDX_T3 0x14
#define TWIN_DMA_HDX_R3 0x16
#define TWIN_DMA_FDX_T3R1 0x1b
#define TWIN_DMA_FDX_T1R3 0x1d
/* Status values */
#define IDLE 0
#define TX_HEAD 1
#define TX_DATA 2
#define TX_PAUSE 3
#define TX_TAIL 4
#define RTS_OFF 5
#define WAIT 6
#define DCD_ON 7
#define RX_ON 8
#define DCD_OFF 9
/* Ioctls */
#define SIOCGSCCPARAM SIOCDEVPRIVATE
#define SIOCSSCCPARAM (SIOCDEVPRIVATE+1)
/* Data types */
struct scc_param {
int pclk_hz; /* frequency of BRG input (don't change) */
int brg_tc; /* BRG terminal count; BRG disabled if < 0 */
int nrzi; /* 0 (nrz), 1 (nrzi) */
int clocks; /* see dmascc_cfg documentation */
int txdelay; /* [1/TMR_0_HZ] */
int txtimeout; /* [1/HZ] */
int txtail; /* [1/TMR_0_HZ] */
int waittime; /* [1/TMR_0_HZ] */
int slottime; /* [1/TMR_0_HZ] */
int persist; /* 1 ... 256 */
int dma; /* -1 (disable), 0, 1, 3 */
int txpause; /* [1/TMR_0_HZ] */
int rtsoff; /* [1/TMR_0_HZ] */
int dcdon; /* [1/TMR_0_HZ] */
int dcdoff; /* [1/TMR_0_HZ] */
};
struct scc_hardware {
char *name;
int io_region;
int io_delta;
int io_size;
int num_devs;
int scc_offset;
int tmr_offset;
int tmr_hz;
int pclk_hz;
};
struct scc_priv {
int type;
int chip;
struct net_device *dev;
struct scc_info *info;
int channel;
int card_base, scc_cmd, scc_data;
int tmr_cnt, tmr_ctrl, tmr_mode;
struct scc_param param;
char rx_buf[NUM_RX_BUF][BUF_SIZE];
int rx_len[NUM_RX_BUF];
int rx_ptr;
struct work_struct rx_work;
int rx_head, rx_tail, rx_count;
int rx_over;
char tx_buf[NUM_TX_BUF][BUF_SIZE];
int tx_len[NUM_TX_BUF];
int tx_ptr;
int tx_head, tx_tail, tx_count;
int state;
unsigned long tx_start;
int rr0;
spinlock_t *register_lock; /* Per scc_info */
spinlock_t ring_lock;
};
struct scc_info {
int irq_used;
int twin_serial_cfg;
struct net_device *dev[2];
struct scc_priv priv[2];
struct scc_info *next;
spinlock_t register_lock; /* Per device register lock */
};
/* Function declarations */
static int setup_adapter(int card_base, int type, int n) __init;
static void write_scc(struct scc_priv *priv, int reg, int val);
static void write_scc_data(struct scc_priv *priv, int val, int fast);
static int read_scc(struct scc_priv *priv, int reg);
static int read_scc_data(struct scc_priv *priv);
static int scc_open(struct net_device *dev);
static int scc_close(struct net_device *dev);
static int scc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
static int scc_send_packet(struct sk_buff *skb, struct net_device *dev);
static int scc_set_mac_address(struct net_device *dev, void *sa);
static inline void tx_on(struct scc_priv *priv);
static inline void rx_on(struct scc_priv *priv);
static inline void rx_off(struct scc_priv *priv);
static void start_timer(struct scc_priv *priv, int t, int r15);
static inline unsigned char random(void);
static inline void z8530_isr(struct scc_info *info);
static irqreturn_t scc_isr(int irq, void *dev_id);
static void rx_isr(struct scc_priv *priv);
static void special_condition(struct scc_priv *priv, int rc);
static void rx_bh(struct work_struct *);
static void tx_isr(struct scc_priv *priv);
static void es_isr(struct scc_priv *priv);
static void tm_isr(struct scc_priv *priv);
/* Initialization variables */
static int io[MAX_NUM_DEVS] __initdata = { 0, };
/* Beware! hw[] is also used in dmascc_exit(). */
static struct scc_hardware hw[NUM_TYPES] = HARDWARE;
/* Global variables */
static struct scc_info *first;
static unsigned long rand;
MODULE_AUTHOR("Klaus Kudielka");
MODULE_DESCRIPTION("Driver for high-speed SCC boards");
module_param_hw_array(io, int, ioport, NULL, 0);
MODULE_LICENSE("GPL");
static void __exit dmascc_exit(void)
{
int i;
struct scc_info *info;
while (first) {
info = first;
/* Unregister devices */
for (i = 0; i < 2; i++)
unregister_netdev(info->dev[i]);
/* Reset board */
if (info->priv[0].type == TYPE_TWIN)
outb(0, info->dev[0]->base_addr + TWIN_SERIAL_CFG);
write_scc(&info->priv[0], R9, FHWRES);
release_region(info->dev[0]->base_addr,
hw[info->priv[0].type].io_size);
for (i = 0; i < 2; i++)
free_netdev(info->dev[i]);
/* Free memory */
first = info->next;
kfree(info);
}
}
static int __init dmascc_init(void)
{
int h, i, j, n;
int base[MAX_NUM_DEVS], tcmd[MAX_NUM_DEVS], t0[MAX_NUM_DEVS],
t1[MAX_NUM_DEVS];
unsigned t_val;
unsigned long time, start[MAX_NUM_DEVS], delay[MAX_NUM_DEVS],
counting[MAX_NUM_DEVS];
/* Initialize random number generator */
rand = jiffies;
/* Cards found = 0 */
n = 0;
/* Warning message */
if (!io[0])
printk(KERN_INFO "dmascc: autoprobing (dangerous)\n");
/* Run autodetection for each card type */
for (h = 0; h < NUM_TYPES; h++) {
if (io[0]) {
/* User-specified I/O address regions */
for (i = 0; i < hw[h].num_devs; i++)
base[i] = 0;
for (i = 0; i < MAX_NUM_DEVS && io[i]; i++) {
j = (io[i] -
hw[h].io_region) / hw[h].io_delta;
if (j >= 0 && j < hw[h].num_devs &&
hw[h].io_region +
j * hw[h].io_delta == io[i]) {
base[j] = io[i];
}
}
} else {
/* Default I/O address regions */
for (i = 0; i < hw[h].num_devs; i++) {
base[i] =
hw[h].io_region + i * hw[h].io_delta;
}
}
/* Check valid I/O address regions */
for (i = 0; i < hw[h].num_devs; i++)
if (base[i]) {
if (!request_region
(base[i], hw[h].io_size, "dmascc"))
base[i] = 0;
else {
tcmd[i] =
base[i] + hw[h].tmr_offset +
TMR_CTRL;
t0[i] =
base[i] + hw[h].tmr_offset +
TMR_CNT0;
t1[i] =
base[i] + hw[h].tmr_offset +
TMR_CNT1;
}
}
/* Start timers */
for (i = 0; i < hw[h].num_devs; i++)
if (base[i]) {
/* Timer 0: LSB+MSB, Mode 3, TMR_0_HZ */
outb(0x36, tcmd[i]);
outb((hw[h].tmr_hz / TMR_0_HZ) & 0xFF,
t0[i]);
outb((hw[h].tmr_hz / TMR_0_HZ) >> 8,
t0[i]);
/* Timer 1: LSB+MSB, Mode 0, HZ/10 */
outb(0x70, tcmd[i]);
outb((TMR_0_HZ / HZ * 10) & 0xFF, t1[i]);
outb((TMR_0_HZ / HZ * 10) >> 8, t1[i]);
start[i] = jiffies;
delay[i] = 0;
counting[i] = 1;
/* Timer 2: LSB+MSB, Mode 0 */
outb(0xb0, tcmd[i]);
}
time = jiffies;
/* Wait until counter registers are loaded */
udelay(2000000 / TMR_0_HZ);
/* Timing loop */
while (jiffies - time < 13) {
for (i = 0; i < hw[h].num_devs; i++)
if (base[i] && counting[i]) {
/* Read back Timer 1: latch; read LSB; read MSB */
outb(0x40, tcmd[i]);
t_val =
inb(t1[i]) + (inb(t1[i]) << 8);
/* Also check whether counter did wrap */
if (t_val == 0 ||
t_val > TMR_0_HZ / HZ * 10)
counting[i] = 0;
delay[i] = jiffies - start[i];
}
}
/* Evaluate measurements */
for (i = 0; i < hw[h].num_devs; i++)
if (base[i]) {
if ((delay[i] >= 9 && delay[i] <= 11) &&
/* Ok, we have found an adapter */
(setup_adapter(base[i], h, n) == 0))
n++;
else
release_region(base[i],
hw[h].io_size);
}
} /* NUM_TYPES */
/* If any adapter was successfully initialized, return ok */
if (n)
return 0;
/* If no adapter found, return error */
printk(KERN_INFO "dmascc: no adapters found\n");
return -EIO;
}
module_init(dmascc_init);
module_exit(dmascc_exit);
static void __init dev_setup(struct net_device *dev)
{
dev->type = ARPHRD_AX25;
dev->hard_header_len = AX25_MAX_HEADER_LEN;
dev->mtu = 1500;
dev->addr_len = AX25_ADDR_LEN;
dev->tx_queue_len = 64;
memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN);
}
static const struct net_device_ops scc_netdev_ops = {
.ndo_open = scc_open,
.ndo_stop = scc_close,
.ndo_start_xmit = scc_send_packet,
.ndo_do_ioctl = scc_ioctl,
.ndo_set_mac_address = scc_set_mac_address,
};
static int __init setup_adapter(int card_base, int type, int n)
{
int i, irq, chip, err;
struct scc_info *info;
struct net_device *dev;
struct scc_priv *priv;
unsigned long time;
unsigned int irqs;
int tmr_base = card_base + hw[type].tmr_offset;
int scc_base = card_base + hw[type].scc_offset;
char *chipnames[] = CHIPNAMES;
/* Initialize what is necessary for write_scc and write_scc_data */
info = kzalloc(sizeof(struct scc_info), GFP_KERNEL | GFP_DMA);
if (!info) {
err = -ENOMEM;
goto out;
}
info->dev[0] = alloc_netdev(0, "", NET_NAME_UNKNOWN, dev_setup);
if (!info->dev[0]) {
printk(KERN_ERR "dmascc: "
"could not allocate memory for %s at %#3x\n",
hw[type].name, card_base);
err = -ENOMEM;
goto out1;
}
info->dev[1] = alloc_netdev(0, "", NET_NAME_UNKNOWN, dev_setup);
if (!info->dev[1]) {
printk(KERN_ERR "dmascc: "
"could not allocate memory for %s at %#3x\n",
hw[type].name, card_base);
err = -ENOMEM;
goto out2;
}
spin_lock_init(&info->register_lock);
priv = &info->priv[0];
priv->type = type;
priv->card_base = card_base;
priv->scc_cmd = scc_base + SCCA_CMD;
priv->scc_data = scc_base + SCCA_DATA;
priv->register_lock = &info->register_lock;
/* Reset SCC */
write_scc(priv, R9, FHWRES | MIE | NV);
/* Determine type of chip by enabling SDLC/HDLC enhancements */
write_scc(priv, R15, SHDLCE);
if (!read_scc(priv, R15)) {
/* WR7' not present. This is an ordinary Z8530 SCC. */
chip = Z8530;
} else {
/* Put one character in TX FIFO */
write_scc_data(priv, 0, 0);
if (read_scc(priv, R0) & Tx_BUF_EMP) {
/* TX FIFO not full. This is a Z85230 ESCC with a 4-byte FIFO. */
chip = Z85230;
} else {
/* TX FIFO full. This is a Z85C30 SCC with a 1-byte FIFO. */
chip = Z85C30;
}
}
write_scc(priv, R15, 0);
/* Start IRQ auto-detection */
irqs = probe_irq_on();
/* Enable interrupts */
if (type == TYPE_TWIN) {
outb(0, card_base + TWIN_DMA_CFG);
inb(card_base + TWIN_CLR_TMR1);
inb(card_base + TWIN_CLR_TMR2);
info->twin_serial_cfg = TWIN_EI;
outb(info->twin_serial_cfg, card_base + TWIN_SERIAL_CFG);
} else {
write_scc(priv, R15, CTSIE);
write_scc(priv, R0, RES_EXT_INT);
write_scc(priv, R1, EXT_INT_ENAB);
}
/* Start timer */
outb(1, tmr_base + TMR_CNT1);
outb(0, tmr_base + TMR_CNT1);
/* Wait and detect IRQ */
time = jiffies;
while (jiffies - time < 2 + HZ / TMR_0_HZ);
irq = probe_irq_off(irqs);
/* Clear pending interrupt, disable interrupts */
if (type == TYPE_TWIN) {
inb(card_base + TWIN_CLR_TMR1);
} else {
write_scc(priv, R1, 0);
write_scc(priv, R15, 0);
write_scc(priv, R0, RES_EXT_INT);
}
if (irq <= 0) {
printk(KERN_ERR
"dmascc: could not find irq of %s at %#3x (irq=%d)\n",
hw[type].name, card_base, irq);
err = -ENODEV;
goto out3;
}
/* Set up data structures */
for (i = 0; i < 2; i++) {
dev = info->dev[i];
priv = &info->priv[i];
priv->type = type;
priv->chip = chip;
priv->dev = dev;
priv->info = info;
priv->channel = i;
spin_lock_init(&priv->ring_lock);
priv->register_lock = &info->register_lock;
priv->card_base = card_base;
priv->scc_cmd = scc_base + (i ? SCCB_CMD : SCCA_CMD);
priv->scc_data = scc_base + (i ? SCCB_DATA : SCCA_DATA);
priv->tmr_cnt = tmr_base + (i ? TMR_CNT2 : TMR_CNT1);
priv->tmr_ctrl = tmr_base + TMR_CTRL;
priv->tmr_mode = i ? 0xb0 : 0x70;
priv->param.pclk_hz = hw[type].pclk_hz;
priv->param.brg_tc = -1;
priv->param.clocks = TCTRxCP | RCRTxCP;
priv->param.persist = 256;
priv->param.dma = -1;
INIT_WORK(&priv->rx_work, rx_bh);
dev->ml_priv = priv;
snprintf(dev->name, sizeof(dev->name), "dmascc%i", 2 * n + i);
dev->base_addr = card_base;
dev->irq = irq;
dev->netdev_ops = &scc_netdev_ops;
dev->header_ops = &ax25_header_ops;
}
if (register_netdev(info->dev[0])) {
printk(KERN_ERR "dmascc: could not register %s\n",
info->dev[0]->name);
err = -ENODEV;
goto out3;
}
if (register_netdev(info->dev[1])) {
printk(KERN_ERR "dmascc: could not register %s\n",
info->dev[1]->name);
err = -ENODEV;
goto out4;
}
info->next = first;
first = info;
printk(KERN_INFO "dmascc: found %s (%s) at %#3x, irq %d\n",
hw[type].name, chipnames[chip], card_base, irq);
return 0;
out4:
unregister_netdev(info->dev[0]);
out3:
if (info->priv[0].type == TYPE_TWIN)
outb(0, info->dev[0]->base_addr + TWIN_SERIAL_CFG);
write_scc(&info->priv[0], R9, FHWRES);
free_netdev(info->dev[1]);
out2:
free_netdev(info->dev[0]);
out1:
kfree(info);
out:
return err;
}
/* Driver functions */
static void write_scc(struct scc_priv *priv, int reg, int val)
{
unsigned long flags;
switch (priv->type) {
case TYPE_S5:
if (reg)
outb(reg, priv->scc_cmd);
outb(val, priv->scc_cmd);
return;
case TYPE_TWIN:
if (reg)
outb_p(reg, priv->scc_cmd);
outb_p(val, priv->scc_cmd);
return;
default:
spin_lock_irqsave(priv->register_lock, flags);
outb_p(0, priv->card_base + PI_DREQ_MASK);
if (reg)
outb_p(reg, priv->scc_cmd);
outb_p(val, priv->scc_cmd);
outb(1, priv->card_base + PI_DREQ_MASK);
spin_unlock_irqrestore(priv->register_lock, flags);
return;
}
}
static void write_scc_data(struct scc_priv *priv, int val, int fast)
{
unsigned long flags;
switch (priv->type) {
case TYPE_S5:
outb(val, priv->scc_data);
return;
case TYPE_TWIN:
outb_p(val, priv->scc_data);
return;
default:
if (fast)
outb_p(val, priv->scc_data);
else {
spin_lock_irqsave(priv->register_lock, flags);
outb_p(0, priv->card_base + PI_DREQ_MASK);
outb_p(val, priv->scc_data);
outb(1, priv->card_base + PI_DREQ_MASK);
spin_unlock_irqrestore(priv->register_lock, flags);
}
return;
}
}
static int read_scc(struct scc_priv *priv, int reg)
{
int rc;
unsigned long flags;
switch (priv->type) {
case TYPE_S5:
if (reg)
outb(reg, priv->scc_cmd);
return inb(priv->scc_cmd);
case TYPE_TWIN:
if (reg)
outb_p(reg, priv->scc_cmd);
return inb_p(priv->scc_cmd);
default:
spin_lock_irqsave(priv->register_lock, flags);
outb_p(0, priv->card_base + PI_DREQ_MASK);
if (reg)
outb_p(reg, priv->scc_cmd);
rc = inb_p(priv->scc_cmd);
outb(1, priv->card_base + PI_DREQ_MASK);
spin_unlock_irqrestore(priv->register_lock, flags);
return rc;
}
}
static int read_scc_data(struct scc_priv *priv)
{
int rc;
unsigned long flags;
switch (priv->type) {
case TYPE_S5:
return inb(priv->scc_data);
case TYPE_TWIN:
return inb_p(priv->scc_data);
default:
spin_lock_irqsave(priv->register_lock, flags);
outb_p(0, priv->card_base + PI_DREQ_MASK);
rc = inb_p(priv->scc_data);
outb(1, priv->card_base + PI_DREQ_MASK);
spin_unlock_irqrestore(priv->register_lock, flags);
return rc;
}
}
static int scc_open(struct net_device *dev)
{
struct scc_priv *priv = dev->ml_priv;
struct scc_info *info = priv->info;
int card_base = priv->card_base;
/* Request IRQ if not already used by other channel */
if (!info->irq_used) {
if (request_irq(dev->irq, scc_isr, 0, "dmascc", info)) {
return -EAGAIN;
}
}
info->irq_used++;
/* Request DMA if required */
if (priv->param.dma >= 0) {
if (request_dma(priv->param.dma, "dmascc")) {
if (--info->irq_used == 0)
free_irq(dev->irq, info);
return -EAGAIN;
} else {
unsigned long flags = claim_dma_lock();
clear_dma_ff(priv->param.dma);
release_dma_lock(flags);
}
}
/* Initialize local variables */
priv->rx_ptr = 0;
priv->rx_over = 0;
priv->rx_head = priv->rx_tail = priv->rx_count = 0;
priv->state = IDLE;
priv->tx_head = priv->tx_tail = priv->tx_count = 0;
priv->tx_ptr = 0;
/* Reset channel */
write_scc(priv, R9, (priv->channel ? CHRB : CHRA) | MIE | NV);
/* X1 clock, SDLC mode */
write_scc(priv, R4, SDLC | X1CLK);
/* DMA */
write_scc(priv, R1, EXT_INT_ENAB | WT_FN_RDYFN);
/* 8 bit RX char, RX disable */
write_scc(priv, R3, Rx8);
/* 8 bit TX char, TX disable */
write_scc(priv, R5, Tx8);
/* SDLC address field */
write_scc(priv, R6, 0);
/* SDLC flag */
write_scc(priv, R7, FLAG);
switch (priv->chip) {
case Z85C30:
/* Select WR7' */
write_scc(priv, R15, SHDLCE);
/* Auto EOM reset */
write_scc(priv, R7, AUTOEOM);
write_scc(priv, R15, 0);
break;
case Z85230:
/* Select WR7' */
write_scc(priv, R15, SHDLCE);
/* The following bits are set (see 2.5.2.1):
- Automatic EOM reset
- Interrupt request if RX FIFO is half full
This bit should be ignored in DMA mode (according to the
documentation), but actually isn't. The receiver doesn't work if
it is set. Thus, we have to clear it in DMA mode.
- Interrupt/DMA request if TX FIFO is completely empty
a) If set, the ESCC behaves as if it had no TX FIFO (Z85C30
compatibility).
b) If cleared, DMA requests may follow each other very quickly,
filling up the TX FIFO.
Advantage: TX works even in case of high bus latency.
Disadvantage: Edge-triggered DMA request circuitry may miss
a request. No more data is delivered, resulting
in a TX FIFO underrun.
Both PI2 and S5SCC/DMA seem to work fine with TXFIFOE cleared.
The PackeTwin doesn't. I don't know about the PI, but let's
assume it behaves like the PI2.
*/
if (priv->param.dma >= 0) {
if (priv->type == TYPE_TWIN)
write_scc(priv, R7, AUTOEOM | TXFIFOE);
else
write_scc(priv, R7, AUTOEOM);
} else {
write_scc(priv, R7, AUTOEOM | RXFIFOH);
}
write_scc(priv, R15, 0);
break;
}
/* Preset CRC, NRZ(I) encoding */
write_scc(priv, R10, CRCPS | (priv->param.nrzi ? NRZI : NRZ));
/* Configure baud rate generator */
if (priv->param.brg_tc >= 0) {
/* Program BR generator */
write_scc(priv, R12, priv->param.brg_tc & 0xFF);
write_scc(priv, R13, (priv->param.brg_tc >> 8) & 0xFF);
/* BRG source = SYS CLK; enable BRG; DTR REQ function (required by
PackeTwin, not connected on the PI2); set DPLL source to BRG */
write_scc(priv, R14, SSBR | DTRREQ | BRSRC | BRENABL);
/* Enable DPLL */
write_scc(priv, R14, SEARCH | DTRREQ | BRSRC | BRENABL);
} else {
/* Disable BR generator */
write_scc(priv, R14, DTRREQ | BRSRC);
}
/* Configure clocks */
if (priv->type == TYPE_TWIN) {
/* Disable external TX clock receiver */
outb((info->twin_serial_cfg &=
~(priv->channel ? TWIN_EXTCLKB : TWIN_EXTCLKA)),
card_base + TWIN_SERIAL_CFG);
}
write_scc(priv, R11, priv->param.clocks);
if ((priv->type == TYPE_TWIN) && !(priv->param.clocks & TRxCOI)) {
/* Enable external TX clock receiver */
outb((info->twin_serial_cfg |=
(priv->channel ? TWIN_EXTCLKB : TWIN_EXTCLKA)),
card_base + TWIN_SERIAL_CFG);
}
/* Configure PackeTwin */
if (priv->type == TYPE_TWIN) {
/* Assert DTR, enable interrupts */
outb((info->twin_serial_cfg |= TWIN_EI |
(priv->channel ? TWIN_DTRB_ON : TWIN_DTRA_ON)),
card_base + TWIN_SERIAL_CFG);
}
/* Read current status */
priv->rr0 = read_scc(priv, R0);
/* Enable DCD interrupt */
write_scc(priv, R15, DCDIE);
netif_start_queue(dev);
return 0;
}
static int scc_close(struct net_device *dev)
{
struct scc_priv *priv = dev->ml_priv;
struct scc_info *info = priv->info;
int card_base = priv->card_base;
netif_stop_queue(dev);
if (priv->type == TYPE_TWIN) {
/* Drop DTR */
outb((info->twin_serial_cfg &=
(priv->channel ? ~TWIN_DTRB_ON : ~TWIN_DTRA_ON)),
card_base + TWIN_SERIAL_CFG);
}
/* Reset channel, free DMA and IRQ */
write_scc(priv, R9, (priv->channel ? CHRB : CHRA) | MIE | NV);
if (priv->param.dma >= 0) {
if (priv->type == TYPE_TWIN)
outb(0, card_base + TWIN_DMA_CFG);
free_dma(priv->param.dma);
}
if (--info->irq_used == 0)
free_irq(dev->irq, info);
return 0;
}
static int scc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
struct scc_priv *priv = dev->ml_priv;
switch (cmd) {
case SIOCGSCCPARAM:
if (copy_to_user
(ifr->ifr_data, &priv->param,
sizeof(struct scc_param)))
return -EFAULT;
return 0;
case SIOCSSCCPARAM:
if (!capable(CAP_NET_ADMIN))
return -EPERM;
if (netif_running(dev))
return -EAGAIN;
if (copy_from_user
(&priv->param, ifr->ifr_data,
sizeof(struct scc_param)))
return -EFAULT;
return 0;
default:
return -EINVAL;
}
}
static int scc_send_packet(struct sk_buff *skb, struct net_device *dev)
{
struct scc_priv *priv = dev->ml_priv;
unsigned long flags;
int i;
if (skb->protocol == htons(ETH_P_IP))
return ax25_ip_xmit(skb);
/* Temporarily stop the scheduler feeding us packets */
netif_stop_queue(dev);
/* Transfer data to DMA buffer */
i = priv->tx_head;
skb_copy_from_linear_data_offset(skb, 1, priv->tx_buf[i], skb->len - 1);
priv->tx_len[i] = skb->len - 1;
/* Clear interrupts while we touch our circular buffers */
spin_lock_irqsave(&priv->ring_lock, flags);
/* Move the ring buffer's head */
priv->tx_head = (i + 1) % NUM_TX_BUF;
priv->tx_count++;
/* If we just filled up the last buffer, leave queue stopped.
The higher layers must wait until we have a DMA buffer
to accept the data. */
if (priv->tx_count < NUM_TX_BUF)
netif_wake_queue(dev);
/* Set new TX state */
if (priv->state == IDLE) {
/* Assert RTS, start timer */
priv->state = TX_HEAD;
priv->tx_start = jiffies;
write_scc(priv, R5, TxCRC_ENAB | RTS | TxENAB | Tx8);
write_scc(priv, R15, 0);
start_timer(priv, priv->param.txdelay, 0);
}
/* Turn interrupts back on and free buffer */
spin_unlock_irqrestore(&priv->ring_lock, flags);
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
static int scc_set_mac_address(struct net_device *dev, void *sa)
{
memcpy(dev->dev_addr, ((struct sockaddr *) sa)->sa_data,
dev->addr_len);
return 0;
}
static inline void tx_on(struct scc_priv *priv)
{
int i, n;
unsigned long flags;
if (priv->param.dma >= 0) {
n = (priv->chip == Z85230) ? 3 : 1;
/* Program DMA controller */
flags = claim_dma_lock();
set_dma_mode(priv->param.dma, DMA_MODE_WRITE);
set_dma_addr(priv->param.dma,
(int) priv->tx_buf[priv->tx_tail] + n);
set_dma_count(priv->param.dma,
priv->tx_len[priv->tx_tail] - n);
release_dma_lock(flags);
/* Enable TX underrun interrupt */
write_scc(priv, R15, TxUIE);
/* Configure DREQ */
if (priv->type == TYPE_TWIN)
outb((priv->param.dma ==
1) ? TWIN_DMA_HDX_T1 : TWIN_DMA_HDX_T3,
priv->card_base + TWIN_DMA_CFG);
else
write_scc(priv, R1,
EXT_INT_ENAB | WT_FN_RDYFN |
WT_RDY_ENAB);
/* Write first byte(s) */
spin_lock_irqsave(priv->register_lock, flags);
for (i = 0; i < n; i++)
write_scc_data(priv,
priv->tx_buf[priv->tx_tail][i], 1);
enable_dma(priv->param.dma);
spin_unlock_irqrestore(priv->register_lock, flags);
} else {
write_scc(priv, R15, TxUIE);
write_scc(priv, R1,
EXT_INT_ENAB | WT_FN_RDYFN | TxINT_ENAB);
tx_isr(priv);
}
/* Reset EOM latch if we do not have the AUTOEOM feature */
if (priv->chip == Z8530)
write_scc(priv, R0, RES_EOM_L);
}
static inline void rx_on(struct scc_priv *priv)
{
unsigned long flags;
/* Clear RX FIFO */
while (read_scc(priv, R0) & Rx_CH_AV)
read_scc_data(priv);
priv->rx_over = 0;
if (priv->param.dma >= 0) {
/* Program DMA controller */
flags = claim_dma_lock();
set_dma_mode(priv->param.dma, DMA_MODE_READ);
set_dma_addr(priv->param.dma,
(int) priv->rx_buf[priv->rx_head]);
set_dma_count(priv->param.dma, BUF_SIZE);
release_dma_lock(flags);
enable_dma(priv->param.dma);
/* Configure PackeTwin DMA */
if (priv->type == TYPE_TWIN) {
outb((priv->param.dma ==
1) ? TWIN_DMA_HDX_R1 : TWIN_DMA_HDX_R3,
priv->card_base + TWIN_DMA_CFG);
}
/* Sp. cond. intr. only, ext int enable, RX DMA enable */
write_scc(priv, R1, EXT_INT_ENAB | INT_ERR_Rx |
WT_RDY_RT | WT_FN_RDYFN | WT_RDY_ENAB);
} else {
/* Reset current frame */
priv->rx_ptr = 0;
/* Intr. on all Rx characters and Sp. cond., ext int enable */
write_scc(priv, R1, EXT_INT_ENAB | INT_ALL_Rx | WT_RDY_RT |
WT_FN_RDYFN);
}
write_scc(priv, R0, ERR_RES);
write_scc(priv, R3, RxENABLE | Rx8 | RxCRC_ENAB);
}
static inline void rx_off(struct scc_priv *priv)
{
/* Disable receiver */
write_scc(priv, R3, Rx8);
/* Disable DREQ / RX interrupt */
if (priv->param.dma >= 0 && priv->type == TYPE_TWIN)
outb(0, priv->card_base + TWIN_DMA_CFG);
else
write_scc(priv, R1, EXT_INT_ENAB | WT_FN_RDYFN);
/* Disable DMA */
if (priv->param.dma >= 0)
disable_dma(priv->param.dma);
}
static void start_timer(struct scc_priv *priv, int t, int r15)
{
outb(priv->tmr_mode, priv->tmr_ctrl);
if (t == 0) {
tm_isr(priv);
} else if (t > 0) {
outb(t & 0xFF, priv->tmr_cnt);
outb((t >> 8) & 0xFF, priv->tmr_cnt);
if (priv->type != TYPE_TWIN) {
write_scc(priv, R15, r15 | CTSIE);
priv->rr0 |= CTS;
}
}
}
static inline unsigned char random(void)
{
/* See "Numerical Recipes in C", second edition, p. 284 */
rand = rand * 1664525L + 1013904223L;
return (unsigned char) (rand >> 24);
}
static inline void z8530_isr(struct scc_info *info)
{
int is, i = 100;
while ((is = read_scc(&info->priv[0], R3)) && i--) {
if (is & CHARxIP) {
rx_isr(&info->priv[0]);
} else if (is & CHATxIP) {
tx_isr(&info->priv[0]);
} else if (is & CHAEXT) {
es_isr(&info->priv[0]);
} else if (is & CHBRxIP) {
rx_isr(&info->priv[1]);
} else if (is & CHBTxIP) {
tx_isr(&info->priv[1]);
} else {
es_isr(&info->priv[1]);
}
write_scc(&info->priv[0], R0, RES_H_IUS);
i++;
}
if (i < 0) {
printk(KERN_ERR "dmascc: stuck in ISR with RR3=0x%02x.\n",
is);
}
/* Ok, no interrupts pending from this 8530. The INT line should
be inactive now. */
}
static irqreturn_t scc_isr(int irq, void *dev_id)
{
struct scc_info *info = dev_id;
spin_lock(info->priv[0].register_lock);
/* At this point interrupts are enabled, and the interrupt under service
is already acknowledged, but masked off.
Interrupt processing: We loop until we know that the IRQ line is
low. If another positive edge occurs afterwards during the ISR,
another interrupt will be triggered by the interrupt controller
as soon as the IRQ level is enabled again (see asm/irq.h).
Bottom-half handlers will be processed after scc_isr(). This is
important, since we only have small ringbuffers and want new data
to be fetched/delivered immediately. */
if (info->priv[0].type == TYPE_TWIN) {
int is, card_base = info->priv[0].card_base;
while ((is = ~inb(card_base + TWIN_INT_REG)) &
TWIN_INT_MSK) {
if (is & TWIN_SCC_MSK) {
z8530_isr(info);
} else if (is & TWIN_TMR1_MSK) {
inb(card_base + TWIN_CLR_TMR1);
tm_isr(&info->priv[0]);
} else {
inb(card_base + TWIN_CLR_TMR2);
tm_isr(&info->priv[1]);
}
}
} else
z8530_isr(info);
spin_unlock(info->priv[0].register_lock);
return IRQ_HANDLED;
}
static void rx_isr(struct scc_priv *priv)
{
if (priv->param.dma >= 0) {
/* Check special condition and perform error reset. See 2.4.7.5. */
special_condition(priv, read_scc(priv, R1));
write_scc(priv, R0, ERR_RES);
} else {
/* Check special condition for each character. Error reset not necessary.
Same algorithm for SCC and ESCC. See 2.4.7.1 and 2.4.7.4. */
int rc;
while (read_scc(priv, R0) & Rx_CH_AV) {
rc = read_scc(priv, R1);
if (priv->rx_ptr < BUF_SIZE)
priv->rx_buf[priv->rx_head][priv->
rx_ptr++] =
read_scc_data(priv);
else {
priv->rx_over = 2;
read_scc_data(priv);
}
special_condition(priv, rc);
}
}
}
static void special_condition(struct scc_priv *priv, int rc)
{
int cb;
unsigned long flags;
/* See Figure 2-15. Only overrun and EOF need to be checked. */
if (rc & Rx_OVR) {
/* Receiver overrun */
priv->rx_over = 1;
if (priv->param.dma < 0)
write_scc(priv, R0, ERR_RES);
} else if (rc & END_FR) {
/* End of frame. Get byte count */
if (priv->param.dma >= 0) {
flags = claim_dma_lock();
cb = BUF_SIZE - get_dma_residue(priv->param.dma) -
2;
release_dma_lock(flags);
} else {
cb = priv->rx_ptr - 2;
}
if (priv->rx_over) {
/* We had an overrun */
priv->dev->stats.rx_errors++;
if (priv->rx_over == 2)
priv->dev->stats.rx_length_errors++;
else
priv->dev->stats.rx_fifo_errors++;
priv->rx_over = 0;
} else if (rc & CRC_ERR) {
/* Count invalid CRC only if packet length >= minimum */
if (cb >= 15) {
priv->dev->stats.rx_errors++;
priv->dev->stats.rx_crc_errors++;
}
} else {
if (cb >= 15) {
if (priv->rx_count < NUM_RX_BUF - 1) {
/* Put good frame in FIFO */
priv->rx_len[priv->rx_head] = cb;
priv->rx_head =
(priv->rx_head +
1) % NUM_RX_BUF;
priv->rx_count++;
schedule_work(&priv->rx_work);
} else {
priv->dev->stats.rx_errors++;
priv->dev->stats.rx_over_errors++;
}
}
}
/* Get ready for new frame */
if (priv->param.dma >= 0) {
flags = claim_dma_lock();
set_dma_addr(priv->param.dma,
(int) priv->rx_buf[priv->rx_head]);
set_dma_count(priv->param.dma, BUF_SIZE);
release_dma_lock(flags);
} else {
priv->rx_ptr = 0;
}
}
}
static void rx_bh(struct work_struct *ugli_api)
{
struct scc_priv *priv = container_of(ugli_api, struct scc_priv, rx_work);
int i = priv->rx_tail;
int cb;
unsigned long flags;
struct sk_buff *skb;
unsigned char *data;
spin_lock_irqsave(&priv->ring_lock, flags);
while (priv->rx_count) {
spin_unlock_irqrestore(&priv->ring_lock, flags);
cb = priv->rx_len[i];
/* Allocate buffer */
skb = dev_alloc_skb(cb + 1);
if (skb == NULL) {
/* Drop packet */
priv->dev->stats.rx_dropped++;
} else {
/* Fill buffer */
data = skb_put(skb, cb + 1);
data[0] = 0;
memcpy(&data[1], priv->rx_buf[i], cb);
skb->protocol = ax25_type_trans(skb, priv->dev);
netif_rx(skb);
priv->dev->stats.rx_packets++;
priv->dev->stats.rx_bytes += cb;
}
spin_lock_irqsave(&priv->ring_lock, flags);
/* Move tail */
priv->rx_tail = i = (i + 1) % NUM_RX_BUF;
priv->rx_count--;
}
spin_unlock_irqrestore(&priv->ring_lock, flags);
}
static void tx_isr(struct scc_priv *priv)
{
int i = priv->tx_tail, p = priv->tx_ptr;
/* Suspend TX interrupts if we don't want to send anything.
See Figure 2-22. */
if (p == priv->tx_len[i]) {
write_scc(priv, R0, RES_Tx_P);
return;
}
/* Write characters */
while ((read_scc(priv, R0) & Tx_BUF_EMP) && p < priv->tx_len[i]) {
write_scc_data(priv, priv->tx_buf[i][p++], 0);
}
/* Reset EOM latch of Z8530 */
if (!priv->tx_ptr && p && priv->chip == Z8530)
write_scc(priv, R0, RES_EOM_L);
priv->tx_ptr = p;
}
static void es_isr(struct scc_priv *priv)
{
int i, rr0, drr0, res;
unsigned long flags;
/* Read status, reset interrupt bit (open latches) */
rr0 = read_scc(priv, R0);
write_scc(priv, R0, RES_EXT_INT);
drr0 = priv->rr0 ^ rr0;
priv->rr0 = rr0;
/* Transmit underrun (2.4.9.6). We can't check the TxEOM flag, since
it might have already been cleared again by AUTOEOM. */
if (priv->state == TX_DATA) {
/* Get remaining bytes */
i = priv->tx_tail;
if (priv->param.dma >= 0) {
disable_dma(priv->param.dma);
flags = claim_dma_lock();
res = get_dma_residue(priv->param.dma);
release_dma_lock(flags);
} else {
res = priv->tx_len[i] - priv->tx_ptr;
priv->tx_ptr = 0;
}
/* Disable DREQ / TX interrupt */
if (priv->param.dma >= 0 && priv->type == TYPE_TWIN)
outb(0, priv->card_base + TWIN_DMA_CFG);
else
write_scc(priv, R1, EXT_INT_ENAB | WT_FN_RDYFN);
if (res) {
/* Update packet statistics */
priv->dev->stats.tx_errors++;
priv->dev->stats.tx_fifo_errors++;
/* Other underrun interrupts may already be waiting */
write_scc(priv, R0, RES_EXT_INT);
write_scc(priv, R0, RES_EXT_INT);
} else {
/* Update packet statistics */
priv->dev->stats.tx_packets++;
priv->dev->stats.tx_bytes += priv->tx_len[i];
/* Remove frame from FIFO */
priv->tx_tail = (i + 1) % NUM_TX_BUF;
priv->tx_count--;
/* Inform upper layers */
netif_wake_queue(priv->dev);
}
/* Switch state */
write_scc(priv, R15, 0);
if (priv->tx_count &&
(jiffies - priv->tx_start) < priv->param.txtimeout) {
priv->state = TX_PAUSE;
start_timer(priv, priv->param.txpause, 0);
} else {
priv->state = TX_TAIL;
start_timer(priv, priv->param.txtail, 0);
}
}
/* DCD transition */
if (drr0 & DCD) {
if (rr0 & DCD) {
switch (priv->state) {
case IDLE:
case WAIT:
priv->state = DCD_ON;
write_scc(priv, R15, 0);
start_timer(priv, priv->param.dcdon, 0);
}
} else {
switch (priv->state) {
case RX_ON:
rx_off(priv);
priv->state = DCD_OFF;
write_scc(priv, R15, 0);
start_timer(priv, priv->param.dcdoff, 0);
}
}
}
/* CTS transition */
if ((drr0 & CTS) && (~rr0 & CTS) && priv->type != TYPE_TWIN)
tm_isr(priv);
}
static void tm_isr(struct scc_priv *priv)
{
switch (priv->state) {
case TX_HEAD:
case TX_PAUSE:
tx_on(priv);
priv->state = TX_DATA;
break;
case TX_TAIL:
write_scc(priv, R5, TxCRC_ENAB | Tx8);
priv->state = RTS_OFF;
if (priv->type != TYPE_TWIN)
write_scc(priv, R15, 0);
start_timer(priv, priv->param.rtsoff, 0);
break;
case RTS_OFF:
write_scc(priv, R15, DCDIE);
priv->rr0 = read_scc(priv, R0);
if (priv->rr0 & DCD) {
priv->dev->stats.collisions++;
rx_on(priv);
priv->state = RX_ON;
} else {
priv->state = WAIT;
start_timer(priv, priv->param.waittime, DCDIE);
}
break;
case WAIT:
if (priv->tx_count) {
priv->state = TX_HEAD;
priv->tx_start = jiffies;
write_scc(priv, R5,
TxCRC_ENAB | RTS | TxENAB | Tx8);
write_scc(priv, R15, 0);
start_timer(priv, priv->param.txdelay, 0);
} else {
priv->state = IDLE;
if (priv->type != TYPE_TWIN)
write_scc(priv, R15, DCDIE);
}
break;
case DCD_ON:
case DCD_OFF:
write_scc(priv, R15, DCDIE);
priv->rr0 = read_scc(priv, R0);
if (priv->rr0 & DCD) {
rx_on(priv);
priv->state = RX_ON;
} else {
priv->state = WAIT;
start_timer(priv,
random() / priv->param.persist *
priv->param.slottime, DCDIE);
}
break;
}
}
Reference in New Issue View Git Blame Copy Permalink